Multiple Business systems

Hello,
Can Multiple Business systems be associated with one Technical system in SLD and assigned in D ?
Regards,

Hi,
> Can Multiple Business systems be associated with one Technical system in SLD and assigned in D ?
It is possible.
You can create N-number of business systems (if ECC system then we can't create more than one business system by using the same client value) for a particulat technical system.
For any application system we can create only one technical system.
Regards
Ramesh

Similar Messages

  • Multiple Business Systems for Multiple Receivers?

    hi,
    idoc > xi -> multiple receivers with xml payload
    I have a scenario where i have to configure multiple receivers for each Supplier from an IDOC. All the receivers will be either HTTP or SOAP.
    When the mapping would be the same for all the Suppliers but during configuration we have to determine the receiver based on an IDOC value to route the xml via HTTP or SOAP
    For this to achieve do we have to create multiple business systems for each receiver?
    If i create a receiver in the business service how can we determine the interface mapping in this scenario?
    Thanks,
    Tirumal

    Hi Tirumal,
    <i>For this to achieve do we have to create multiple business systems for each receiver?</i>
    As you know,Business system is a logical name for the Techincal Systems, Theoretcially it is not required to create different Business systems for the each receivers.
    Generally Business Systems are grouped/created based on the Business Process/Functionality/Type of Receivers etc.
    So if you think, your each receiver is of type different type/process then create different Business systems.
    It depends~
    If you create Business Service, then you need to add your Message Interfaces explicitly into the Business Service( By open the Business Service->You can see the Sender/Receiver Interface tabs).
    Hope this helps,
    regards,
    moorthy

  • 3rd party tech systems for multiple business systems...

    I think this might a very stupid question but still would like to post it..:).. In a 3parties involved scenario, can 1 technical system be assigned to multiple business systems , if all business systems refer to the same 3 party..or does each 3rp party business system needs its own technical system..
    Also I need to move only 1 product and the SWCV assigned to the product to QA..I do not want to export entire SLD..By exporting this single product and importing into the SLD of QA, I hope it will not overwrite the SLD components of the QA box but add this new product as delta.
    -Teresa

    Hi Teresa,
    >>>Also I need to move only 1 product and the SWCV assigned to the product to QA..I do not want to export entire SLD..By exporting this single product and importing into the SLD of QA, I hope it will not overwrite the SLD components of the QA box but add this new product as delta
    I believe you can only do an incremental export/import
    sld does not allow importing/exporting one product...
    Remember to do a backup of your QA SLD
    (from the SLD - administration)
    then if you make a mistake nothing will happen
    about the second question:
    <i>"Business systems, which name the logical receiver independently of technical properties. For example, a business system might be a client of an SAP system.
    Technical systems with which the hardware of the system is specified in more detail (server data, and so on)."</i>
    this should be possible not only for SAP systems
    Regards,
    michal
    Message was edited by: Michal Krawczyk

  • Same Technical System multiple Business systems?

    Hello,
    We have a unique (atleast i felt it) landscape where we have 2 Prod PI system. We have divided out interfaces logically into 2 categories and they will run on the respective prod system. Both this prod have its own SLD and hence there is no issue here.
    The issue is with the Pre-Prod where like prod we have 2 PI systems (and 2 integration servers) but they both share the same SLD. We have only one SAP R/3 backend system and hence we have only one technical system in the SLD but this SAP R/3 system has to connect to both the Pre-prod systems for different interfaces. For this to happen we have to create 2 Business systems with the respective PI pre-prod Integration Server. But SLD doesnt allow to create 2 business systems for the same technical systems.
    Is there any way around this as we cannot change the SAP R/3 system and also cant have different client in R/3 for each of PI Pre prod.
    This is a major roadblock and requires your expert advice on how to proceed in this scenario.
    Regards,
    Yash

    Shitij,
    You are correct in understanding that the requirement is to create 2 business systems for the same technical system with same SID (S*1) and same client.
    The reason i need this is because I have 2 PI system P1 and P2 with 2 different integration server which share the same SLD. Now when i create a business system for S1 i specific the inegration server for P1 and add this business system in the transport target for P*1.
    How will i do the same for P2? I cannot create a new business system for S1 with integration server of P2 and add it in the transport target for P2. If i dont do it i cannot do any transports as it will give error like no Business system found in SLD.
    Hope i made it clear.
    Yash

  • CMS - Are multiple business systems required?

    I am receiving a CMS error of "VIAWARE" (my business system) in not assigned a business system in group QA.  I only have one viaware business system for R/3 dev, qa, and prod to point to.  I don't want to make 3 VIAWARE business systems if I don't have to.  Do I need three?
    Thanks

    Hi,
    If you are using single SLD for all Dev,QA and Prod environment, then you need to replicate the Business Systems for each environment..
    So one Business System represents one Technical System in this case R/3. SO in each environment SAP systems are different..
    But if you have 3 SLDs, then no need of creating 3 business systems.
    btw, while transporting did you assign Business Systems for transport group ? this doc may help u-
    http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
    Hope this helps,
    Regards,
    moorthy

  • Business System and Client

    Hi
    I checked many treads and still I couldn't get a satisfactory explanation to the difference between Business System and Client. I read in help.sap site that multiple business systems can be assigned to a single technical system and also each numbered client of an SAP system is a Unique Business System ? So are client and business system one ? If so why use it interchangably ? And if many business systems can be assigned to the technical system how do we specify a related Integration Server ? As I understand only one Business System can be assigned Integration server. So if we assign many business systems to one technical system then how can we have related Integration server for all ? I couldn't get a satisfactory explanation to this doubt in any thread in this forum
    Midhun

    >>each numbered client of an SAP system is a Unique Business System ?
    It could be. But it is not necessary that each client of SAP system is communicating with PI. If it is then there will be one Business System for each client.
    >> So are client and business system one ?
    No. Client is more substantial category in SAP system. Business system just defines the logical name to these clients if they communicate with PI.
    >> If so why use it interchangably ?
    Actually they can't be used interchangably always. The only relation is that for each client of SAP system, there could be only one Business system.
    >>And if many business systems can be assigned to the technical system how do we specify a related Integration Server ?
    For related Integration Server name, you need to select the PI Business system name which would communicate with your business system. For a single SLD scenario you will see PI Dev, Q and Prod business systems.
    >> As I understand only one Business System can be assigned Integration server.
    Correct. Its a PI Business system.
    >> So if we assign many business systems to one technical system then how can we have related Integration server for all ?
    For all Business systems of 1 technical system, you need to select the same PI Business system name.
    Regards,
    Prateek

  • Technical Systems and Business Systems

    Hello Everybody!!!
    I have some doubts, can you help me, please???
    1) Technical Systems are application(software) systems, ok? They aren't hardware systems, ok?
    2) In my SLD I should have a SAP ECC system as a technical system and each of their clients as a bussiness system, ok?
    3) For third-party systems, where the client concept doesn't exist, I should have one technical system and only one business system for my third-party system, ok?
    thanks a lot
    Julio

    hi  julio ,
               ur view is correct  except in the technical system .
    1)   technical systems are the physically  located systems in which we can create only technical system for any physically  located system .
    2)   bussiness systems are logical  systems . according  to the type of technical  system we can  create the no of bussiness  systems .
       technical system of type W AS ABAP  we can create multiple business systems as there is the concept of clients .
       technical system of   third party   we can  not create more than  one business system  as there  is  no  matter  of  client .
    3)   so  for  every  third party  systems  only  one   business  system  will  be  there .   
    some  important  points :. 
        atleast  one   business  system  will  be  there  on   any   system .
    we  can   create   more  than  one   business   system  on  third  party systems .

  • SLD: Pointing two business systems to the same client...

    Hi Guys,
       Is there anyway to make two business systems point to the same client(on the same r/3 technical system)? how about a work around?
    Thanks,
    Harsh

    Harsh,
    >><i>Finally all collapse to one client in production.</i>
    Even though you will have multiple Business Systems in every envrionment, the final transport will happen from only one environment.
    DEV --> QA --> PROD. In this case, objects are moved from dev to qa and then from QA to prod and so, all you will need is the trasnport target created in the QA business systems pointing to the Prod busines system and do the transport.
    ><i>While transporting to a new SLD(quality to prod) can I choose one transport target for multiple source business systems?</i>
    Take a look at this document for multiple SLD transports. Should answer all doubts,
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
    Regards,
    Bhavesh

  • One Business System Per Client

    Going in, I figured I could have multiple business systems tied to a single technical system.  For example, if I have a techical system (SAP R/3) of RD0 110, and I want to have one business system for a vendor price check, another for sending ship notice idocs to a 3rd party server, etc.
    When I go to add a second Business System to RD0 110 in SLD, I get an error that "The selected client already has a business system. Select a different client or system.".
    Where am I going wrong?

    Hi Keith,
    the problem you are running in is that the SLD checks your business system entries against used client and logical system from tech.system. If one is already used in a link to a bus.system SLD does not allow to link the same tech. system to another bus.system.
    But you don´t have unique namespaces for each scenario.
    You will import the SWCV from SLD into Int.Rep..
    Then you can define a range of namespaces in the SWCV object.
    In each namespace you can implement a scenario.
    The SWCV is connected to a bus. system, that s right.
    But the scenario will not only work with one bus.system.
    Usually you will use the SWCV to build up a scenario in Int.Rep. for the sender system providing the scenario with data.
    The bus. systems defined in the SLD  are more relevant in the Int.Directory, when implementing the comm.channels and building up the interface-/sender-/receiver-determinations per scenario.
    If you could connect a tech. system to several business systems what could be the advantage? The tech.system is basis for connecting to SWCVs.
    We had the same question here in the beginning of our project but our result was that the multi bus.system connect to a tech. system would only produce more need of organizing the structure in the SLD.
    We put the focus on naming conventions in the namespaces to separate the different scenarios for the same bus.system as data provider (=sender).
    If more than one system is sending the same date in a business scenario you need to establish that in having a well defined definition (agreements) in the Int. Repository!
    Hope this can help!
    Best regards
    Dirk

  • Business system assignment

    hi
    i am new to xi i have a doubt that what is the relation ship between technical system and business and system and what is relation ship between them
    i.e. how many technical system can be assigned to business system and vice-versa.

    Hi srinivas,
    You can have multiple business systems assigned to a technical system
    1: many
    The association between the TS and the BS is dependent on the TS type; for instance, in a system based on SAP Web AS (ABAP), each client in the system is a separate BS (this corresponds to the notion of a client as a Logical System in ALE configuration).
    A very simple analogy could be this
    The machine that you are working on might be a computer with a hostname on the network. This is the technical system. You might have installed various s/w from providers like Microsoft( Office etc) , Oracle (database).
    The s/w correspond to the Business System.
    Regards
    Krishna
    Note: Reward Points if useful. Thanks

  • Multiple HANA systems connection for Smart Business Fiori Apps

    Hi Experts,
    I could configure and run standard Fiori apps through launchpad and able to configure all type of Fiori apps through web dispature and single HANA system1 [retail]
    As per the recommendation from SAP, we have separate HANA system2 for finance.
    Now here is the tricky part.
    I have added HANA system2 in web dispature. Also I have the trusted connection in my front end gateway server for transactional apps.
    Transactional apps from HANA system2 db is working fine. Now, I would like to configure Finance related Analytical apps from HANA system2 views. For this I am not able to get KPI IDs for evaluation and drill-down configuration.
    The path for Smart Business KPI modeler in both the HANA systems are same. Is this causing issue to bring KPI IDs and HANA views into modeler?
    How to get both views in single KPI modeler tool to configure the KPI tiles?
    Please let me know how to proceed?
    Thanks!
    Praveen.

    Johannes
    There is some problem with the link
    See this.
    Connecting multiple SAP Systems
    Thread name is 'Connecting multiple SAP Systems'
    Krishna Murthy

  • Multiple backend systems for business package ESS/MSS

    Hi,
    I would like to know whether there is a smart solution for connecting the business package ESS/MSS with multiple backend systems (up to 10 systems).
    I am aware of the possibility using parameter "sap-wd-arfc-useSys", but this implies, that content needs to be duplicated n-times in order to be able to maintain the Jco destination suffix.
    Any hint, also for custom built solutions are very welcome!
    Best regards,
    Johannes

    Johannes
    There is some problem with the link
    See this.
    Connecting multiple SAP Systems
    Thread name is 'Connecting multiple SAP Systems'
    Krishna Murthy

  • One PI for multiple ECC systems

    Hi PI experts,
    We have one PI instance per environment, but multiple ECC instances, so taking Dev we currently have a BAU ECC and a project ECC, although there are occasionally conflicting needs this is generally manageable.  However a new project has introduced the need for two further ECC instances per environment, all requiring the same interfaces.  We will still only have one PI.  All of the interfaces receive files coming into the same folder structure. 
    Has anyone else experienced this scenario?  How was it best to manage the competing projects trying to use one PI instance?
    Thanks very much in advance
    R_Macd

    Hi R_Macd,
    You need to register the ABAP Systems in SLD, use the transaction RZ70 to do this, please check the refer links:
    http://help.sap.com/saphelp_nwpi71/helpdata/en/7c/1966ab384d42a78deaebc74d33c032/frameset.htm
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=213353417
    After that, create the business systems with the client do you need to connect.
    http://help.sap.com/saphelp_nwpi71/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/frameset.htm
    Best Regards,
    .Luis Bernal.

  • Multiple SAP systems in MSCS

    Hello,
    We would like to install an ECC 6.0 and a CE in a cluster MSCS of two nodes.
    I've found the SAP documentation "Installation of Multiple SAP Systems in MSCS: Oracle" but the doc version is 03/30/2007. Could you please tell me wether there is a new version of this document? or where can I find more documentation about this?
    Is it recommended to create a domain between the cluster nodes? We're going to have 3 MSCS clusters with two systems in each cluster, should I create a domain for the three clusters, one domain per cluster or no domain at all?
    Thanks and regards,
    Ana.
    Edited by: systems2111 on Feb 3, 2010 9:46 AM

    Hello Shailesh,
    The scenario is the following:
    - MSCS between ECC and CE.
    - MSCS between Solution Manager and nothing.
    - MSCS between Websphere and SAP Business Objects
    Every MSCS has two machines. for example, ECC will run on one machine, CE oon the other machine and in case of problems the cluster will run the ECC in the CE node.
    I don't know if I have explain myself, but, anycase, please ask me with your doubts.
    Regards,
    Ana.

  • R/3-extraction to multiple BW-Systems

    Hi everybody,
    I was asked if it is possible to do the same data-extraction from one R/3-source-system to multiple BW-Systems (I don't mean various cubes in one system)
    I can't find any information about this topic!
    I hope one of you can help me!
    Thanks in advance!
    Greetz
    Patrick

    Hi Patrick,
    this topic has been recently discussed in another thread named "One R/3 to multiple BW" under "Business Information Warehouse Implementation".
    Hope it helps
    GFV

Maybe you are looking for

  • Printing problem with HP Photosmart 5510

    This is not really a Mavericks problem but I was hoping that someone out ther who owns a HP Photosmart 5510 all in one printer may know the answer. All was working fine up untill I (foolishly) changed the printing mode to economy black & white and no

  • Overlaping buttons problem (AS 3.0)

    When you have two buttons that end up one on top of the other, is there a way to tell it to disregard the one at the bottom and just use the top one. This is what's going on: I have a stage that has an image with "hotspots" (invisible buttons all ove

  • Group by performance

    I have a table Which has around 300 Million Records. The table has a primary key on Col1,Col2,Col3,Col4 The table has unique index on Col5,Col6,Col7 I have a query which is taking around 45 Minutes.. Select Col1,Col2,Col3,MIN(Col5) FROM TABLE WHERE C

  • Mark RV45A-KETDAT field as not modifiable in VA02

    Hello guys. I need to Mark the field RVA45A-KETDAT as not modifiable in VA02. I've been searching for information but was referring to implement a BAPI, or an User-Exit, or an Transaction Variant, but I would like to know if is there a possibility to

  • Dynamic text won't display

    I don't know if this is a bug. I have a movie that contains a dynamic text. When I run it, the text displays fine. But when the said movie is run through another movie clip (using loadMovie), the dynamic text won't display. Any ideas why? Thank you.