Multiple BW Systems pulling data from one R/3

Does SAP recommend multiple SAP-BW systems to pull data from the same R/3 system?
If so then how does delta get get handled in such a scenario?

Hi Roberto,
I have a similar question.We currently have one R3 system connected to one BW system.
Now, we have to connect another BW system and start extracting data for 2LIS_03_BF and 2LIS_03_BX.
The delta loads are already happening for the existing BW system for these 2 datasources.
I intend to follow the following steps :
1) Lock all Material postings
2) Transfer data from existing Extraction queue and then the Delta Queue for the 2 Datasources
3) Delete SetUp tables
4) Fill SetUp tables (MCNB and OLI1BW)
5) Initialize Delta in new BW source system
6) Unlock Material postings
a) If I don't run the job for emptying the extraction queue, will ther be duplicate entries in the new BW system whenI run delta after Init? Which leads me to my second question, when data is transferred from extraction queue to delta queue, is it done for each target system?
b) Can this whole process disturb the existing delta flow in the existing BW system.
Thanking you in anticipation.
Pankaj

Similar Messages

One SAP BI 7 system pulling data from 2 ECC 6 systems

Hello experts,
has any one gone through the scenario of extracting data from 2 SAP ECC 6 systems in to one BI 7 system? If so, What were the challenges from the view of configuration, performance and security? I appreciate your feed back.
Thanks,
Prasanthi Bellam

>
prasanthi bellam wrote:
> Hello experts,
> has any one gone through the scenario of extracting data from 2 SAP ECC 6 systems in to one BI 7 system? If so, What were the challenges from the view of configuration, performance and security? I appreciate your feed back.
>
> Thanks,
> Prasanthi Bellam
Configuration, Peformance and security wouldnot be a issue, the only issue was cleansing the data from two system.
We actually went with compounding all the objects with source system tag, which involved heavy manual activity.But before going to this, you can check out if there is master data overlap for the two systems if not then you can do away without compounding.

Can we pull data from one cube to another cube

Hi All,
I need to pull the data for a 4 fields from an existing info cube to another cube. Can any one let me know the procedure of how to do this.
Thanks in Advacne

scenario cube1 --> cube2
1) load data into cube1
2) cube1 > export datasource > it creates the ds with 8cube1
3) rsa1 > source systems > myself sourcesystem > replicate datasources
4) cube2 > rt clk > create update rules
5) map the update rules for the 4 fields and activate
6) rsa1 > infosources > search for 8cube1 > create infopackage and load data.
Regards,
BWer
Assign points if helpful.

Push data from one BW system to another BW system

Hi:
I am aware of the process using export datasources to pull data from one BW (source) system into another BW (receiving) system. But is there a way/process where by the source BW system can push the data to the receiving BW system? Thx

Hi:
If you don't get any better replies, think about Triggering Events from SOurce BW and these events will start the Pull from Target BW.
E.g., Create P-Chains or ABAP Programs in Source BW. Here, whenever data needs to be pushed, an Event will be triggered in Target BW.
In target BW, that raised Event will kickoff Process Chains, ec.
Let me know if you want to ivestigate this option.
Ram C.

Fetching data from one BI server to another

Hi All,
We have BCS environment on top of BI. We have a request from Client to refresh the BCS data in our quality box (copy of BCS production data). Data wasn't refreshed to our Quality system regularly from SAP Quality and hence we thought of complete BI Production copy to our Quality box.
Since the above strategy is time consuming,we have been contemplating on other options and have stumbled upon SAP blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/21489. [original link is broken] [original link is broken] [original link is broken]
The blog talks about pulling data from one BI server to another. As BCS is such a fragile environment, wanted to take an opinion on whether you all see any concerns with the approach.
Regards,
Vivek Das Gupta

Hi,
W have done the system copy from production to QA system and only faced authorization issues and also we follwed the same blog and as mentioned in the blog dont forget below points before going ahead for the system copy.
switch the source Real Time Infocube (in MBP) if you want to copy all latest productive data, that is to say including those which were contained in the open request.
For data consistency reasons and to avoid any risk of error, the loading process is executed in Full.
If you planning to copy only a part of the source data records, set filters in the infopackages.
Hope it going help you
Thanks

Migrate Closed Sales Data from one SAP system to Other

Hi,
We have a requirement to migrate Closed Sales Order data from one SAP System to the New SAP system.
Please share your thoughts on the considerations / DOs and Donts for such cases.
Appreciate your response.
Kind Regards,
Tanuji

Hi,
If you want to migrate closed SOs..then first consider why? and from what date i.e how long back?
Following are the considerations:
1) You can't get the creation date same as your previous system dates--this might lead to incorrect reporting. So you'll have to check if its really worth?
2) You might want to have a reference no somewhere in the new transactions from the previous system.
3) If you want to migrate the deliveries, invoices then you've to consider also GL migration as well as payments.
Regards,
Raghu.

How to transfer data from one system to another by datamart please give de

how to transfer data from one system to another by datamart please give details

Hi Deba,
Find the below SAP help doc which may help u...
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also find the below threads...
Loading data from one cube to another cube.
data copy from infocube to infocube in two different BW systems
Delta when loading from ODS to ODS
reg datamart
Data mart flag
Regards,
KK.

Replicate data from one client to another in a production system

Hello,
I have two client in production system. Whenever a equipment is created in one client it should be replicated in another client and whenever a equipment is changed in one client the changes should be replicated to another client.
Data should be immediatly replicated to the another client.
Can basis do some setting so that the two client will always have the same data for equipments.
or i have to get the data from one system and send it to another system through idoc and update that data in another system. This will take a lot of time.
or is there any easy way

Hi Sachin,
You need custom program to achieve this requirement. Either you can use ALE+IDoc or direct BAPI function module call.
This should happen within seconds if designed properly.
Regards,
Avinash

Migrate PY and TM cluster data from One SAP System to another

Hi Experts,
Could you please suggest me some options to migrate PY and TM cluster data from One SAP System to another? My requirement is to move all the cluster data (Active and Inactive ees).
I see that PU12 is an option. Anybody used that to migrate between SAP systems. Please provide some details
Points guaranteed
I see that using PU12 you can export only PCL2 Clutsers. Are there any ways to move the other clusters like PCL4 ?

Hi,
As far as data transfer, If have all normal configuration settings in your targeted system you can use LSMW (Use T.code AS91 in LSMW for recording) to transfer your data in your both cases.
Hope it resolves your both the issues.
Regards,
Murali

Copy data from one SAP system to another based on conversion rules

Hi All,
Please provide your input on how can we copy data from one SAP system to another based on conversion rules.
Conversion rule :
vkrog in 110 vkorrg in 120
1234 4567
<<text removed>>
Thanks
Edited by: Matt on Feb 16, 2009 4:35 PM

Please read the Rules of Engagement here: Please read "The Forum Rules of Engagement" before posting! HOT NEWS!!
Please note that offering points is against the rules.
matt

Process to migrate configuration data from one BW development system to other

Hi SAP Gurus,
We need to migrate configuration data from one BW system DE1 to DE2.. Both systems are SAP net weaver 7.3.
DE1 is BW pre-production system and DE2 is BW DEV.
No transactional data required.
Please share a document if available.
Kindly, let me know the procedure for Remote Client copy or client export/import with steps.
Also let me know the pre-requisite for these activities.
Thanks,
Avadhesh Sharma
+91 8095226536

Hi,
Remote Client Copy (SCC9)
Remote client copy is performed in rare situation. When the client copy is done
between two different SAP systems, the copy is called remote client copy.
Before remote client copy is performed, a RFC connection must be set between those
systems using SM59.
1. Check RFC connection is working fine between two systems you want to perform
remote client copy using SM59
2. create client in the target system you want to copy the client
3. login to target client using user SAP* and password PASS
4. execute tcode SCC9 and select the RFC for the source system
5. select the profile you want to copy like SAP_ALL
6. select source client number you want to copy
7. Select source client master data , mostly it is the same client number
8. Now click on schedule as background job.
9. Leave the background server field blank.
10. Click schedule.
11. Select Immediate from next screen.
12. Save the screen.
13. Client copy is scheduled now as a background job and client copy process started.
14. The progress can be monitored using tcode SCC3
Client Export/Import
A client transport consists of two steps:
First a client export extracts client data from the source client
to files at the operating system level. Then the data is imported
from the operating system files into the target client.
To perform a client export, follow these steps:
1. Log on to the source client. From the SAP initial screen,
choose transaction SCC8 (Client Export). Select the data to
be copied using a profile.
2. Indicate the target system to which the client will be copied.
The target system must be defined in TMS as part of the
transport domain.
3. Begin the client export. Because copying is a lengthy
process, use scheduled background processing.
Do not run any other client copy tool before the
data export is finished.
This export process will generate up to three data files at the
operating system level:
• RO< number >: this file contains cross-client data
• RT< number >: this file contains client-specific data
• RX< number >: this file contains SAPscript texts
Depending on the type of data selected through the client
transport profile, the client copy command files added to the
buffer of the target system are as follows:
• <S-SID>KO<number>: this file is for cross-client data
• <S-SID>KT<number>: this file is for client-specific data
• <S-SID>KX<number>: this file is SAPscript texts
The client export change requests are not imported when an
Import all takes place. Therefore, you must import these requests into the target client
using TMS. Choose one of the transport requests of the client transport in the Transport
Management System (TMS). The other transport requests belonging to this client
transport are then automatically added in the correct order.
After the import process has completed, post-import activities are required for object
generation steps. After completing the import, log on to the target client. From the SAP
systems initial screen, choose transaction SCC7
Regards,
Chandu

One report to pull data from SQL or DB2

Hi Guys,
First post here. I have scoured the internet using our good friend google for answers and have come up empty. I hope someone can help me here!
Some Info: Crystal XI R2, Visual Studio 2005, Ms SQL Server 2005, DB2, VB.NET
What I am trying to accomplish is using one report to pull data from either SQL 2005 or DB2.
The problem I get is if the report is configured to pull data from SQL 2005, I cannot change it using the code below to pull data from DB2. The SQL Report uses the Microsoft OLEDB Provider. The DB2 report uses the IBM DB2 UDB for iSeries IBMDA400 OLEDB provider. When I quickwatch the oCRTable logon information, it seems to retain the other database's info.
Any ideas?
My code:
    Private Sub LoadRpt(ByVal rpt As String)
        Try
            Dim strReport As String
            Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument
            Dim rpt As CrystalDecisions.CrystalReports.Engine.ReportDocument
            Dim oCRTable As CrystalDecisions.CrystalReports.Engine.Table
            Dim oCRConnectionInfo As New CrystalDecisions.Shared.ConnectionInfo()
            strRptNm = String.Format(".rpt", rpt )
            strReport = String.Format("\{1}", Server.MapPath("Reports"), rpt )
            crReportDocument.Load(rpr)
            '   check to make sure report is loaded; if not, then do nothing
            If crReportDocument.IsLoaded Then
                oCRConnectionInfo.DatabaseName = ConfigurationManager.AppSettings.Item("DataBase")
                oCRConnectionInfo.ServerName = ConfigurationManager.AppSettings.Item("Server")
                oCRConnectionInfo.UserID = ConfigurationManager.AppSettings.Item("Profile")
                oCRConnectionInfo.Password = ConfigurationManager.AppSettings.Item("Password")
                For Each oCRTable In crReportDocument.Database.Tables
                    oCRTable.LogOnInfo.ConnectionInfo = oCRConnectionInfo
                    oCRTable.ApplyLogOnInfo(oCRTable.LogOnInfo)
                    oCRTable.Location = oCRTable.Location
                Next
                For Each rpt In crReportDocument.Subreports()
                    For Each oCRTable In rpt.Database.Tables
                        oCRTable.LogOnInfo.ConnectionInfo = oCRConnectionInfo
                        oCRTable.ApplyLogOnInfo(oCRTable.LogOnInfo)
                        oCRTable.Location = oCRTable.Location
                    Next
                Next
            ... other code ...
            End If
        Catch ex As Exception
            ... other code ...
        End Try
    End Sub
Edited by: Mace Windu on Feb 7, 2009 7:55 AM
Edited by: Mace Windu on Feb 7, 2009 7:56 AM

David,
Your suggestion worked to near perfection. The only problem was that if I configured the datasource locations of the report and sub reports in CR to use the SQL ODBC, the .net program would successfully log in using the DB2 info but had a problem reading the data. If I configured the datasource locations of the report and subreports in CR to use the DB2 ODBC, everything worked! Thanks for the advice.
The force is strong with you.
Mace

Importing multiple rows from the same date from one table to another.

I need to pull information from one sheet(Sheet 1) to another (Sheet 3). I am able to pull the first line of info with VLookup but need all rows for a specific date, which could range from zero to 10 rows depending on the day according to the date in cell G1 on Sheet 3. I am importing the needed information from Sheet 2 with vlookup, but since it is information from one cell to another its not an issue. Is there a way to transfer the needed data?

Hello
Here's another method to build a summary table, which calculates index of every row in source data matching given key and use the indices to retrieve rows of data.
E.g.,
Data (excerpt)
A1 date
A2 2015-03-12
A3 2015-03-12
A4 2015-03-12
A5 2015-03-12
B1 a
B2 A
B3 B
B4 C
B5 D
C1 b
C2 1
C3 2
C4 3
C5 4
Summary (excerpt)
A1 a
A2 =IF($D2<>"",INDEX(Data::B,$D2,1),"")
A3 =IF($D3<>"",INDEX(Data::B,$D3,1),"")
A4 =IF($D4<>"",INDEX(Data::B,$D4,1),"")
A5 =IF($D5<>"",INDEX(Data::B,$D5,1),"")
B1 b
B2 =IF($D2<>"",INDEX(Data::C,$D2,1),"")
B3 =IF($D3<>"",INDEX(Data::C,$D3,1),"")
B4 =IF($D4<>"",INDEX(Data::C,$D4,1),"")
B5 =IF($D5<>"",INDEX(Data::C,$D5,1),"")
C1 2015-03-11
C2
C3
C4
C5
D1 index
D2 =IFERROR(MATCH(C$1,Data::A,0),"")
D3 =IFERROR(MATCH(C$1,OFFSET(Data::A,D2,0,ROWS(Data::A)-D2,1),0)+D2,"")
D4 =IFERROR(MATCH(C$1,OFFSET(Data::A,D3,0,ROWS(Data::A)-D3,1),0)+D3,"")
D5 =IFERROR(MATCH(C$1,OFFSET(Data::A,D4,0,ROWS(Data::A)-D4,1),0)+D4,"")
Notes.
Formula in A2 and B2 can be filled down.
Formula in D3 can be filled down. Note that D2 has different formula than D3.
Tables are built in Numbers v2.
Hope this may help you to get the basic idea.
H

Transferring the data from one system to another system.

Hi All,
   I need to transfer the material master data from one system(e.g - dev1)
to another system (e.g - dev2).
front end application is BSP.
if the user enters the material number 1 to 20 and if he presses the submit
button, the entire data should be transferred to another system.
This transferring of data should be done in background.
1. which method we should opt for this ? either ALE or any other method like XI.
2. Is there any standard bapi function module to transfer the material master from one system to another system.
3. whether this above transferring can be done thru XI and which will be best approach for doing this?
Points will be awarded.
Regards,
Vinoth.

Hi amole,
   Thanks for the reply.
    How to use lsmw for transferring fo data from one system to another system.?
   whether to download the data from one system in excel or notepad and again to upload into other system?
   can u explain me.
Regards,
vinoth.

Need to pull the data from one server to another server in SSMS using linked server

Hi, I have store proc which will take the parameters passed to it and store it in a table in that server. Now, this table data has to be pulled to another server table which is of same structure. But I need to do that in the same store proc which is in
first server. I have searched in online but could not figure it how to link connection between these two servers and pull data from the first sever to the second. Can anyone please help

You can setup a linked server from Server A to Server B. Then you will be able to query server B from Server A.
eg: Assume you have a database test in Server B which has a table sample. From server A you could run this query to pull details.
Select * from ServerB.test.dbo.sample.
http://msdn.microsoft.com/en-us/library/ms188279.aspx
http://msdn.microsoft.com/en-us/library/ff772782.aspx#SSMSProcedure
You also have other options like distributed queries (openquery), check this blog
http://blog.sqlauthority.com/2007/10/06/sql-server-executing-remote-stored-procedure-calling-stored-procedure-on-linked-server/
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

Multiple BW Systems pulling data from one R/3

Similar Messages

Maybe you are looking for