Multiple calendars under one wiki group

I have set up iCal server and web services and all is working fine, apart from group (wiki) calendars?
The Problem: A wiki was created with the name matching a workgroup managers "groups short name"
The group name in workgroup manager "WDA It" the short name "wdait", therfore the wiki was named "wdait" to match.
These instructions come from apple support.
when you log into the wiki with a user that is part of a group that has been given read write privileges to access that wiki you see the default "Calendar"
when you add the wiki calendar to a clients iCal using their username and password and the server address https://serverFQDN.com:8443/principals/wikis/wdait/ the same "Calendar" is shown. This is great but when you add another calendar through iCal on the client machine that new calendar does not sync or even show up on the web wiki interface.
Or visa versa if the new calendar is created on the wdait wiki calendar (web interface) this does not sync back to show up on the clients iCal.
i have tried creating a new workgroup manager group and a brand new user and a new wiki to match the new group and all on the web interface created 3 calendars and even changed the name of the default calendar from "Calendar" to something like "cal1" then on a fresh client machine with no calendars added in ical I added the new user who had been given rw privileges on that new wiki groups calendar, and when it synced only the first "calendar" showed up with the old name "calendar" and not the new changed name "cal1"
Any ideas? scratching head.

I am struggling as well with accessing the WIKI calendars using the "https://server:8443/principals/wikis/groupname/". It also takes me to a different calendar.
I have ended up turning off the SSL and going directly to the wiki itself which uses the format of "http://server/principals/__uids__/wiki-E01D65F9-5E68-4642-B540-83F54498ABF5__wik i_guid/".
I found the address by going to going to the "https://server:8443/principals/wikis/groupname/" directly in Safari which then shows you all the different names the calendar uses if i remember correctly.
Suspect that if you try some of the other address' you may be able to use SSL, didn't have enough time to try!

Similar Messages

  • Advise on using DBMS_XA with multiple branches under one global transaction

    Dear all
    I need some advise on using DBMS_XA from PL/SQL with tightly coupled multiple branches under one global transaction. Basically, I've successfully written some PL/SQL code that in 3 different sessions attaches to 3 different branches of one global transaction and before ending each branch they can see each others uncommitted data. So far so good.
    However, I'm not sure I completely understand how each branch must call xa_end, xa_prepare and xa_commit correctly using two phase commit and my calls result in errors like:
    ORA-24767: transaction branch prepare returns read-only (XA error code 3 = Transaction was read-only and has been committed)
    ORA-24756: transaction does not exist (XA error code -4 = XID is not valid)
    ORA-02051: another session or branch in same transaction failed or finalized
    This is the structure of my programs (3 SQL*Plus sessions):
    main: Uses xid 123|0 (branch 0 of global transaction 123). This should be the coordinator that commits using two phase commit across the 3 branches
    m1.xa_start tmnoflags
    m2.DML
    m3.Wait for thread A + B to manually be started and run xa_end
    m4.xa_end tmsuccess
    m5.xa_prepare
    m6.xa_commit false
    thread A: Uses xid 123|A (branch A of global transaction 123)
    a1.xa_start tmnoflags
    a2.DML -- thread A can see main and thread B's data
    a3.xa_end tmsuccess
    a4.xa_prepare -- required?
    a5.Should we also call xa_commit false?
    thread B: Uses xid 123|B (branch B of global transaction 123)
    b1.xa_start tmnoflags
    b2.DML -- thread B can see main and thread A's data
    b3.xa_end tmsuccess
    b4.xa_prepare -- required?
    b5.Should we also call xa_commit false?
    The failing steps are:
    m5
    m6
    a4
    a5
    b4
    b5
    Before starting calling xa_end I see 3 rows in V$GLOBAL_TRANSACTION, eg (hex 7B = decimal 123):
    FORMATID GLOBALID BRANCHID BRANCHES REFCOUNT PREPARECOUNT STATE FLAGS COUPLING
    203348753 0000007B 00000000000000000000000000000000 3 3 0 ACTIVE 0 TIGHTLY COUPLED
    203348753 0000007B 0000000000000000000000000000000A 3 3 0 ACTIVE 0 TIGHTLY COUPLED
    203348753 0000007B 0000000000000000000000000000000B 3 3 0 ACTIVE 0 TIGHTLY COUPLED
    Thanks a lot in advance.
    Cheers
    Finn

    OK, I've figured it out. This is poorly documented as it's not well explained how to handle the various return codes. Turns out that all but the last xa_prepare calls return dbms_xa.xa_rdonly (tightly coupled branches are combined -- "read only" optimization), the last one returns dbms_xa.xa_ok and this is when you should call xa_commit.
    Now my next problem is that DBMS_XA doesn't work from within jobs (DBMS_JOB and DBMS_SCHEDULER), which makes it very difficult to use DBMS_XA. My purpose of using DBMS_XA is to coordinate work across multiple sessions in one transaction but if I can't easily create the multiple sessions, I'm stuck.
    When called from a job, xa_start throws:
    ORA-24789: start not allowed in recursive call
    on Oracle 11.2. In Oracle 11.1 it works, but xa_end fails with
    ORA-25352: no current transaction
    so I guess in fact the xa_start call didn't really work either, even though it returned tm_ok.
    I'm now trying to find a workaround on how to use DBMS_XA from within jobs, please comment if you have any suggestions. Or if you have any suggestions on other means of establishing the concurrent sessions (I wouldn't like to resort to external programs that need username/password to connect as password management would be a security issue).
    Thanks in advance.
    Cheers
    Finn

  • Multiple Schemas under one user account with XE 10g

    Hi,
    I am using (learning) XE 10g. I would like to know if it is possible to have multiple schemas under one user account and have the schemas logically separated. As of right now, I have three schemas that I am working with, each one under a different user account. This is inconvenient, because I have to logout of one user account and login to another user account simply to be able to work with another schema.
    Thanks

    It isn't possible to have multiple schemas under one database user account. It is of course possible to grant rights to other database users, and or roles, in order to allow access to the tables/data from other accounts. In Oracle there is a one-one mapping between schema and user.
    Niall Litchfield
    http://www.orawin.info/

  • Can there by multiple accounts under one id?  I just loaded a $25 gift card and it showed up in my balance.  My daughter, under the same id had $12.0 left from a previous gift card.  Now only the $12.01 shows up and the $25 is nowhere to be found?

    Can there be multiple accounts under one apple id?  My daughter and wife apparently share an id between my daughter's ipod and my wife's ipad.  My daughter has what she believes is her $12.01 left from a gift card.  My wife loaded a $25 gift card recently (I saw the $25 balance in her account when she was done) and after a password change, now all that shows up is the $12.01?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Multiple subnets under one vlan

    Hi everyone,
    Is there any way to create multiple subnets under one VLAN ? Right now, I am using VLAN 110 and it's IP is 172.16.0.1/16.
    We have three types of devices on this VLAN.I want to create 3 or 4 subnets for those devices under this VLAN for reducing the traffic or broadcast ?
    Please advise me.....
    Thanks in advance

    Mohammed,
    As long as you have a single VLAN only, you will not reduce the amount of broadcasts in this VLAN by using several IP networks. Even if the stations are in different IP networks within a single VLAN, every broadcast will be sent across the entire VLAN to all stations, regardless of their configured IP address. Broadcasting is a matter of Data Link Layer, or Layer2, and if you keep a single Layer2 domain (the VLAN), you will keep a single, merged, large broadcast domain.
    Just to answer your question, you could assign multiple addresses to an interface in a single network/VLAN by using secondary IP addresses, for example:
    interface Vlan110
    ip address 172.16.0.1 255.255.0.0
    ip address 192.168.1.1 255.255.255.0 secondary
    ip address 10.20.30.1 255.255.255.0 secondary
    However, as I explained, this will only allow you to "stretch" multiple IP networks over a single broadcast domain so there is no saving in terms of broadcasts or traffic reduction. For that, you must resort to multiple VLANs.
    Best regards,
    Peter

  • Adding multiple users into one security group at one shot

    Hi,
    Is there any way we can add multiple users into one security group at one shot into PWA.
    For example: I want 100 create 100 users in EPM and Providing them with custom define Team defined permissions and can I add Time sheet Manager as well while creating bulk user through resource template in Project server 2010.
    Thanks,
    Prashant

    Hi Prashant,
    In order to add users in a security group, you can open the group, select all the appropriate resources (pressing CTRL key) and add them to the group. There is no other easy way. Otherwise a powershell script could do the job.
    For the timesheet manager, if all the 100 resources have the same timesheet manager, you can go to the resource center, select the resources (sorting by resource ID will give you together the latest resources added), bulk edit the resources and select the
    timesheet manager for the selected resources.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • How do display multiple accounts under one CalDav account?

    Hello - I have a google mail account, for which I use google calendar to organize both my and my wifes calendars. We share calendars, but she has a separate google account and calendar. Using iCal, both these calendars are subscribed using separate CalDav accounts. Using the calendar function on the iphone, I subscribe to both calendars separately as well, but the interface is different.
    Here's my question: I created a new calendar under my account, which I would like to share with certain people (call it 'Group cycling sessions.'). On iCal, under > Properties > 'delegation,' I can access the calendar, and by the way, access my wifes as well. However, I cannot figure out how to subscribe to this calendar on the iphone (short of using mobile me, which I am loathe to do).
    Any ideas?

    Google calendar colours are taken from the Google settings.
    If you have another account such as the calendar on your iPhone or the Birthday Calendar, each time they are removed and re-activated, the colour will cycle to the next one Apple has chosen

  • Can you have multiple ipods under one itune accounts on one computer same log in

    i have nurmeous ipods and iphones and i have 4 different log ins on my computer for them can i have them all under one log in without resyncing and putting songs and pictures on each one???

    "How to use multiple iPods with one computer" http://docs.info.apple.com/article.html?artnum=300432

  • Multiple currencies under one company code for contracts

    Gooday!
    We have a new schenario ( In RE-FX) where we have a couple of contracts which were negotiated with the landlord that needs to be settled in Rand, whilst the company code are setup for another currency, which is dollar (caters for the bulk of the contracts). So each time you create a new contract the currency is already greyed out (Dollar), which obviously means that it cannot be changed there.
    Apparently the company code can be setup in FI to accommodate secondary currencies, however, this seems not to be the case in RE-FX.
    My question is this, is it possible to have multiple currency contracts under one company code in RE-FX, and if so, do one set it up in FI or RE-FX?
    Any assistance would be greatly appreciated!

    Conditions in Foreign Currency (New)
    As of SAP ECC 6.0, Enterprise Extension Financials, Enhancement Package 2 (EA-FIN 602), Business Function Real Estate (RE_GEN_CI_1), you can enter conditions for contracts, rental objects, or contract offers that are in a currency that differs from the local currency of the company code.
    You can enter the currency directly when processing conditions. You can also enter a currency translation rule in the posting term. The rule is then used for all conditions to which this posting term is assigned.
    You specify in Customizing which currency translation rules are allowed for each contract type and usage type.
    See SAP Note 123819.

  • Multiple Podcasts under one Artist

    I am looking for information on how to build a group of podcasts under one artist? Just like the VH1 podcast. A main page with all vh1 podcasts listed (with graphic). Thank you for your help.

    Now the site won't let me edit my original post yet again, so I'm going to have to "Reply" to my own thread.
    After removing all the Minutemen songs from my iPod, and re-editing all the ID3 tags for the MP3 files on my hard drive, then dumping all back onto my iPod, I'm still having the same problem.
    <Edited by Moderator>

  • Why are multiple slides under one table of contents button?

    I'm using Captivate 8, and notice that when I preview my course, the table of contents buttons directly correspond with each slide but then after that, the remaining slides are lumped under one table of contents button.  How can I fix this?  In other words, when looking at the table of contents, it looks like my course only has 6 slides when in reality there's 30...many of which are lumped under the last button.

    You have to scroll, they are not under one button at all.
    Good practice is to group slides, then you'll see the hierarchy in the TOC and you are able to collapse all groups. That way the TOC will have a clean look, and the user can open a group to see the individual slides.

  • How to prevent multiple purchases under one account

    how do you make sure kids dont purchase songs already under my library? We have three people buying songs from different devices under one credit card. Thanks, Julie

    Welcome to the Apple Community.
    Previously purchased items should display a purchased notification instead of the price at the point of purchase. I think the problem might occur when there are similar items, some people like to have various versions of the same thing, it probably isn't appropriate to mark these as purchased.
    I guess it's a difficult one, but perhaps the only way is to get them to check before they buy.

  • Multiple emails under one Apple ID - how to separate iMessages?

    We are trying to set up one idevice to use a separate email address under a master Apple ID.  It is for a child so they should not have access to all account settings and whatnot. Everything works fine except one element. 
    On the device that gets all email addresses under the one Apple ID, if someone from a different Apple ID sends an iMessage to any one of the few email addresses under that one Apple ID, all messages show up in one single thread from that person.
    So for example, there are the following addresses under the first apple ID:
    AppleID1-add1
    AppleID1-add2
    The main iDevice gets both of these addresses under Apple ID 1.  But then there is another iDevice that ONLY sends and receives via AppleID1-add2.
    Now, someone under another account, call it AppleID2 has routinely sent iMessages to AppleID1-add1 historically. 
    The problem is that if AppleID2 sends an iMessage to AppleID1-add2, on the second device it shows just fine.  But on the first device under Apple ID 1, ALL iMessages from AppleID2 show up under one thread, regardless of if on AppleID2's device, the message was intended for AppleID1-app1 or AppleID2-app2. 
    Hope that makes sense.  Essentially we want it that if AppleID2 sends an iMessage to AppleID1-add1 it shows up as one thread, and if they send an iMessage to AppleID1-add2, it shows up on a separate thread on the device #1 (which has both -add1 and -add2 enabled).
    Make sense?  Hope there is a straightforward approach to do this.  I was surprised it didn't work this way when we set it up.
    Thanks!

    You can't separate iMessages to different email addresses on the same Apple ID. However, you can create a separate Apple ID just for iMessages on the device, and leave everything else (Find my iPhone, iTunes & App Stores, etc) on the shared Apple ID.

  • Use case for multiple crosstabs under one datasource

    I'm trying to understand why one would have multiple crosstabs for one datasource.  When I change one crosstab, it changes the other crosstab.  I was could have a different layout for multiple crosstabs.
    Thanks.
    Regards,
    Mel Calucin

    Hi Mel,
    I am not following this question; would it be possible to rephrase it?
    You could have multiple tabs for a data source - such as a one tab showing the result set in a cross tab and the other for a chart.
    Tammy

  • Importing box sets of multiple cds under one album listing in iTunes?

    I am trying to import a box set of music cds into my PC library and have them under one album listing. Currently, each disc is shown in library with its own album cover listing.  I am trying disc 1, disc 2 & disc 3 contents listed under 1 library album.

    See One cover for multi-disc album.
    tt2

Maybe you are looking for