"Multiple Calls calling" iphone 4/ios5

What does "Multiple Calls" calling mean? iphone 4 / ios 5 -
ATT cell service. Was not making or receiving any calls that I know of. Phone was going back and forth betw service & searching....
ATT customer service had no idea, suggested contacting Apple.

When I first bought my iPhone 4S iOS 5.0, I was able to set a repeat reminder for a new SMS. I was able to choose 1/2/5/10/15 minutes for it to chime again if I hadn't checked it. The setting was in Settings > Messages.
However, after I upgraded to 5.0.1 the setting is no longer there. I would love to be able to turn OFF the repeat reminder.

Similar Messages

I have started getting spammed on multiple Apple products (iPhone and iPad) with FaceTime calls since the recent IOS update. Is there any feature or sedtting I can use locally to restrict incoming calls to FaceTime without going to the carrier?

I have started getting spammed on multiple Apple products (iPhone and iPad) with FaceTime calls since the recent IOS update. Is there any feature or setting I can use locally to restrict incoming calls to a FaceTime account without going to the carrier?

After calling AT&T tech support one more time, and explaining to them that the glitch was on their network, they admitted that the problem was at their tower...
I continued to use the phone on EDGE mode for two more days until the problem was fixed.
I even got a call back from a tech support guy asking me if my phone was working properly....
I wish they would have admitted to the problem before I sat at the apple store for 2 hours.

Multiple Call Glitch on Verizon Iphone

Coming from every version of the iphone since it's inception, switching over to Verizon iPhone has been great except for 1 major glitch I discovered. While I was in a current call, I received another call and was able to hold & answer just like on the AT&T iPhone. The screen said "multiple calls" and I got an option to "swap" between the 2 active calls, however the "merge" option was grayed out (unavailable) so i couldn't conference the two active calls. When i hung up with one of the calls, i did not get the option to go back to the other call -- when i ended the one call, it ended both calls. i called one of the Apple stores and they were baffled. i tried a test on my wife's Verizon iPhone as well, and the same thing happened.

I have the Verizon Iphone as well and mine does this too. I called apple and told them about it and they were very suprised to hear this as well. They said to submit a feedback and hope that there is a software update that comes out for this to be fixed. Its a little crazy that this would not be on the Verzon Iphone considering this is a standard phone feature not a network deal. I posted this on the feedback. I hope you do too. Along with other people as well the more people that tell them they maybe they will fix it.

Call waiting says "multiple calls" rather than listing the number or the contact. Does anybody know how to fix this?

Call waiting says "multiple calls" rather than listing the number or the contact. This error is not consistent, sometimes it says "multiple calls" and other times it lists the contact. This is happening on a coworker's iPhone 4s. Does anyone know how to get it to list the contact every time?
Thank you,
Dan

It sounds as though it may not be ending calls correctly, I would try restarting the phone, and then resetting all settings.

Trouble handling multiple calls

Can anyone explain to me why the iphone, after being in production since 2007, still cannot handle multiple calls properly? I am on one call, I take another call (and select put current on hold) and when I am done with the second call, I am locked into HOLD on the original. This is simply the latest in the most aggravating aspect of this phone. It is a phone FIRST and doesn't do multiple call handling well at all! It hasn't for the years I've been using iphones.
Am I alone in this frustration?

I have no problems taking the waiting call off hold.
Reboot.
Restore.
Restore as new.
Test after each step until it works.
Something is wrong.
It could be a carrier problem. What carrier are you using?

I have tried to restore my old iPhone 3, but when i tried the itunes logo and a pic of a USB cable have come up on my phone and now i cant do anything with my phone.Any ideas how i can fix this? I can make/receive call. iPhone 3GS, iOS 3.1.2. Thanks

I have tried to restore my old iPhone 3, but when i tried the itunes logo and a pic of a USB cable have come up on my phone and now i cant do anything with my phone.Any ideas how i can fix this? I can make/receive call. iPhone 3GS(Ireally don't remember if it's a 3G or 3GS), iOS 3.1.2. Thanks for your help

please help me!!!

Multiple calling logical database ADA

Hello,
I need to call logical database ADA two times in my program. I use calling logical database using LDB_PROCESS function module. I need to call LDB for depreciation areas 01 and 60. If I call second time, I get exception LDB_NOT_REENTRANT. I found, that for multiple calls of LDB, there should be LDB_PROCESS_INIT subroutine in logical database proram. In this case, program is SAPDBADA and in this program, LDB_PROCESS_INIT is missing.
Could you pls. help me, how to call ADA logical database two times?
Thanks&regards,
Jirka

The exception LDB_NOT_REENTRANT means: The logical database is not prepared to accept several successive calls within a transaction. So obviously you can't use LDB_PROCESS for your purpose.
Perhaps your goal is possible if you use a sequence of commands
GET <ldb_node_1>.
GET <ldb_node_1> LATE.
GET <ldb_node_2>.
GET <ldb_node_2> LATE.
etc...
where ldb_node_1, ldb_node_2, etc... are some nodes included in logical database ADA. As I am not familiar with this particular LDB I can't tell which nodes are required to achieve your goal.

Erratic behavior with multiple calls to the same RFC

Hi,
I am running into a strange problem invoking a custom RFC from a .NET application. I would appreciate it if someone has any insight into it.
The steps to call the RFC are straightforward:
1. Open the connection to SAP server
2. Make the call
3. Close the connection
As you can imagine, the code is also quite simple.
In my simulation program, I have a button on a UI form that one can click and execute the above steps.
The problem I am running into is that, on multiple calls, sometimes the parameter values that show up on the SAP side are not right. When the input parameter (a structure) is viewed in the ABAP debugger, the field values are all getting exchanged. For example, first name field contains values for the last name. Also, some fields that are supposed to have values do not have any.
Just before the RFC call is made, when we look at the structures on the .NET side, the field values are the way they are supposed to be.
I have not been able to establish a pattern. Sometimes, it takes two clicks to reproduce this problem. Sometimes it takes five.
One of the team members thinks that this starts occurring right after one call fails for some valid reasons. However, I am not yet convinced.
Having written many custom .NET applications using RFCs an BAPIs, I am fairly conversant with the technology. However, this one just baffles me. It appears something is getting messed up at the RFC layer itself. Does anyone have any idea on what could be happening?
Thank you in advance for your help.
Pradeep

Indeed this is interesting .
The problem is caused by an incompatible change from .NET Framework 1.1 to 2.0. Howerver, the documentation on the 1.1. API was not clear enough to decide if the incompatible change was adequate or not. Now in detail:
NCo runtime uses the reflection API Type.GetProperties to read and cache all properties of a Proxy structure. NCo assumes that the order of the returned properties is the same on each call and especially that it is the order of the properties as they appear in source code. This was the behavior in .NET 1.1. It has changed in 2.0, see e.g. the internet forum discussion in http://www.thescripts.com/forum/thread455492.html .
Calling Type.GetProperty(<PropertyName>) or Type.SetProperty(<PropertyName>) in your code moves the mentioned properties up in the list returned by Type.GetProperties() later inside of NCo.
We found the following work-arroud:
When using late-binding, call a dummy Type.GetProperties() before any GetProperty or SetProperty.

How do you delete the images in the Iphone images album. Not the camera roll. There is an album called Iphone images and there is not a delete option

How do you delete the images in the Iphone images album. Not the camera roll. There is an album called Iphone images and there is not a delete option

The same way you put them on the phone. Connect the phone to iTunes on your computer, click on the name of the iPhone, then the Photo tab. Uncheck the albums you don't want on the phone and click Sync.

Multiple call of update function module

Hi Everybody,
I have made implementation to the definition MB_DOCUMENT_BADI( material Document creation).
While executing this BADI I am getting short dum with this error Multiple call of update function module.
Here is the short dump--
In the FORM routine Buchen_Ausfuehren (program SAPMM07M), an error
message was issued by a Business Add-In (BAdI) or function module.
This is not permitted, because it could lead to data
inconsistencies. For this reason, the update of the material
document was also terminated with a termination message (dump).
Note that this message (M7 372) is not the responsible error
message.
Please any body suggest the way forward.
Regards,
Sandeep.

Hi Kiran,
Thanks for the reply.
I have created one implementation to the BADI MB_DOCUMENT_BADI. This badi will hit while creation of material document.I have write the code in method MB_DOCUMENT_BEFORE_UPDATE such that it will act only for certain movement types specially for t-codeMb1a and MB31.
What problem I am facing i have used a error message "MB_DOCUMENT_BEFORE_UPDATE" in this method.If we got the erroe message then we dont need to post the material dcoument,but here problem is that if the material document could not posted then it corrupt the material and when we performing 261/101 we got error message like " Inconsistency between MM and ML for material and plant"
I have used following things like-
1-while updating the customized table using " Commit Work".
2-Call function vb_change_batch for updating the batch and not in update task.
3. Dequeue the table after updating the table.
Will thos things can create any inconsistency to the MM and ML.
Please suggest me uor thoughts.
Thanks
sandeep.
Thanks ,
sandeep.

How come every time i'm on the phone and another call enters I answer it but it doesnt tell me anywhere who is who on each line so i can go back and forth?? it only says multiple calls and i cant hang up the other line

how come every time i'm on the phone and another call enters I answer it but it doesnt tell me anywhere who is who on each line so i can go back and forth?? it only says multiple calls and i cant hang up the other line.

My carrier is Sprint. But I actually have checked with others and theirs work fine.

Forms hanging after multiple calls to Foreign Function Interface

Hi,
Can anyone help me with this problem. I'm getting a 'FRM-92100:
Your connection to the server was interrupted ... Details ...
Java Exception:java.io.EOFException' error message when i make
two calls to a c share object file using the ORA_FFI package.
Forms will hang with that error message when I call the foreign
function more than once and when the ORA_FFI.LOAD_LIBRARY
function is executed twice.
I've tried using the ORA_FFI.UNLOAD_LIBRARY function at the end
straight after the load library plus my processes and it still
hangs with that error message.
I've got a temporary work around which is not ideal but it
works. I've made another copy of the C shared object file and
renamed it and made my second call to load this library.
I would prefer to have one shared object file and make multiple
calls to it from forms. Any suggestions?
note : running forms 6.0 on three tier architecture with web
browser.

"Mush15" <[email protected]> wrote in
message
news:g7hela$flo$[email protected]..
> Ok the issue is a stack overflow caused by calling the
function
> recursivly.
>
> I have tried creating 2 functions and have each call the
other but still
> recieve a stack overflow.
>
> Any ideas help??
Try incrementing a counter every time you call the function
and decrementing
it on the way out. When you hit 2640 times, stop calling it.

Can't turn off caller id in ios5

How do I turn off caller ID in ios5?

Just to make sure you didn't overlook the obvious (we all do it more often than we care to admit). Can you toggle the other services in the Sharing pane? Perhaps you just need to click on the padlock and authenticate before you can make changes.
Second thing to try. Make sure System Preferences is not open. Look in the user's Home folder/Library/Caches. Find a cache item com.apple.preferencepanes.cache. Delete this item. Log the user out and log back in. Now open System Preferences and see if you can make the changes.
Third thing to try. Here are the items that get changed in the /etc/cups/cupds.conf file when you turn Printer Sharing OFF---
line 55 becomes
ServerName 127.0.0.1
lines 453 and 454 become
#Port 631
Listen 127.0.0.1:631
line 581 becomes
#BrowseAddress @LOCAL
line 635 becomes
BrowseInterval 0
line 826 Allow From @LOCAL
is deleted and the block from line 822 through 826 becomes
<Location />
Order Deny,Allow
Deny From All
Allow From 127.0.0.1
</Location>
All these changes are taken from a modification of the default cupsd.conf as supplied with the version of CUPS Apple supplies with Tiger. The cupsd.conf that comes with version 1.2.x is most likely different. You will have to do some comparison and interpretation.
Hope this helps.
EDIT: Don't forget to recycle the cupsd whenever you make a change to the configuration file.
sudo killall -HUP cupsd
Matt
Mac Mini G4; B&W G3/300

Listening in to multiple calls

I am running a small call centre style business that recieves some skype calls. I wish to listen in to the conversations for quality control.
So far, I have just been a silent and invisible third member of a group conversation but I want to be able to listen to multiple calls at once without leaving group calls or making it known that I am joining them. Is this possible? Can I switch between multiple calls? Can I make my joining or leaving group calls invisible? Can I join one without someone inviting me into it?

Hi,
None of what you ask for is currently possible and I think it's hard to find good use cases apart from your scenario. Do you have an idea in which situations else such functionality could be useful? I don't think anyone would like the option for invisible call participants. Feels a lot like wiretapping and spying into calls.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

How to update multiple calling hours based on business partner

Hi All,
please help me in this issue : how to update multiple calling hours based on business partner in SAP CRM.
Regards,
Siva kumar.

Check maintainance view V_TB49, add new scheduling type.

"Multiple Calls calling" iphone 4/ios5

Similar Messages

Maybe you are looking for