MULTIPLE CAMERA

iam trying live video streaming using FMS3, FME2, and Flash
Lite3
how to create live video streaming, if i use multiple
camera?

Likely yes, an NVR could but this isn't something Microsoft Lync is capable of. I think you might be better off looking for third party software and directly asking their presales team.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Similar Messages

Multiple Cameras with one Instance of FME

Hello,
I am using FME 3.0 for upstreaming to Justin.tv and I am very satisfied, and it works perfectly.
Now I'd like to add effects, like Captions to my Stream and switch between different cameras. I have tried ManyCam which provides me a virtual webcam which I can easily add as Source to FME, but if I switch sources in ManyCam it needs several seconds to start the inactive camera and shows a black screen until the chosen camera is active.
Additionally I'd like to use effects when switching from one camera to another like fading in, or gemoetrical effects, like door opening etc.
The main problem is that I cannot see the live pictrure of an inactive camera in ManyCam,
What I am asking you for is to recommend me software which provides multiple camera feeds to combine/switch live to a virtual webcam.
I know that wirecast supports all this, inclusive the upstream to my server, however I'd like to stick to FME and I cannot afford wirecast. My budget would be less than US$200.
Anything you can recommend?
Thank You
Wolfgang

Installation guide:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000718044&_OBJECT=011000358700000291922009E
page 37:
4.1.7 SAP Solution Manager Client Strategy
SAP delivers a client with a standard configuration for SAP Solution Manager as part of the installation
process. Client 000 is the initial configuration client, and client 001 is provided for productive use.
Additional clients can be created if desired
So I don't see an issue...but i would not recommend it...

How do I sync multiple cameras in FCPX

I have been using pluraleyes in FCP7 to sync multiple cameras to a master sound clip. How can I do this in FCPX?

Rita, Dazaik is using FCP X not FCP7, Having PluralEyes work in FCP X would be a dream come true
Dazaik, unfortunately there are some major issues with Syncronize Clips in FCP X. Please read my in-depth post here https://discussions.apple.com/thread/3277834 if there is something you don't understand, let me know and I'll be more than happy to help.

Multiple camera recording question

Ok so if i have multiple cameras and one of them triggers and is recording can another record at the same time. it looks like when this happens i lose a video. the triggers are all in the activioty log but no video is there to see.
Al

From my experience the cameras record independently. The motion sensor mode however is not enough for consistent recordings with the wireless cameras. I had to create a second timed mode for each wireless camera and set it to run all day. The issue I have now is consistently viewing the recordings. I keep getting an "unable to play" message! always something!

Need a solution for multiple sites and multiple cameras

Hello,
I have a customer who has 3 different sites all in different locations. They are not connected through VPN however they do have a terminal server at the main location. They have 6 cameras total, 2 at each location. They are looking for a way to be able to connect all of these cameras to a centeral location (i.e. website, server, ect.) so that all 6 cameras can be viewed on the same screen by different users who would be given access. I am looking for the best solution working with a tight budget. Let me know your ideas and how you would implement it.
Thanks!

Ben,
Normally when you have multiple cameras you would log into the web interface and change the http port of at least one of them. The default port is 80. We normally would change one camera to use http port 1024 and the second 1025. Then you simply forward port 1024 to the first camera and 1025 to the second in the router. Just remember that when you attempt to access the cameras after you change the port it will look like this: :1024">http://:1024 (locally and remotely) Please reply if you have further questions.

Do I need multicam in order to create a movie from multiple cameras?

Do I need multicam in order to create a movie from multiple cameras? The old fashioned way is just to simply put multiple video clips into multiple video tracks in Final Cut, right? Then I can transition the tracks as I see fit.
Multicam in Final Cut Pro simply improves upon this by hard synching timecodes right?
As an amateur, do I really need multicam features in Final Cut Pro in order to make a movie from multiple camera angles?

Will it make your editing tasks more efficient? Not
likely. Multicam is an advanced feature of FCP. It
requires knowing how most of the application's basic
operations are performed.
I have to disagree with bog in that multicam is all about efficiency and being able to quickly set-up and edit what could normally take a lot longer. But he is totally correct in that it is a strange set-up with some strange behaviors so if you don't know what you're doing and plan accordingly it could take a lot longer and be a lot more frustrating than the 'old fashioned' way.
I think it's also important to note that multi-cam is way more than just the "real time" switching of the multiclip in the viewer as it plays back. If you can take time to learn the ins and outs of multi-cam then you can use some features on some jobs and other features at other times. An amateur can do anything that the FCP software because it's there in front of you so play play play!

What are the steps to using camera & color space matching on footage with multiple cameras?

Hi there,
I am new to speedgrade, and need to use the Camera and Color Space Matching technique to automatically color correct my sequence which contains footage from multiple cameras. I have watched all the videos on speedgrade on AdobeTV and lynda.com that I can find, but haven't been able to find one that actually shows me how to do so. Can anyone point me to a video/tutorial where I could learn the steps for the process or outline them for me if that is easier?
Thanks!

I'm in the same boat. There is a new 'camera matching' function that premiered at NAB 2013, but when will it be actually available...? As to your original question, look up getting a proper White and Black balances with each camera first. Learn how to work with HSL and RGB values etc, and I think Karl Seoule has some videos that cover this under 'Color Finesse' vids at Adobe TV. Also check out the '3-Way Color Corrector' tuts and "Secondary Color Correction' tuts as well. And finally either on Adobe TV or Creative Cow there is on video that actually talks about matching either 2 shots or 2 cameras as well.
All this is to say here is no easy/simple way. I'm hoping when Adobe introduces the Color Matching in Speed Grade we can just use stills as reference in Speed Grade, develop 'looks' that match the cameras and then apply the looks in Premiere without having to use the huge .dpx files that we have to use in Speed Grade now, but that may just be part of the process.

What happened to multiple camera support in OnLocation CS4?

Am I going crazy? Didn't OnLocation CS4 support multiple cameras (changing between them with a drop down selection) after its first release? But after one of those Adobe software upgrades it seems I need to close the app, turn off one camera, and start the application back up??
When I originally purchased my CS4 collection of software and began to use it, I used OnLocation to record clips from two identical Canon HV30 cameras. In the "monitor" portion of the screen there was a drop down box that allowed to select between the two cameras currently attached to the computer.
However, after one of the several Adobe CS4 updates, this feature no longer seems to be included in the software. There is no drop down box in the monitor window - instead it just says "Monitor: Canon Camcorder."
When I start OnLocation just one of the cameras shows up - the other is not even given as the option. If I start OnLocation with only the second camcorder turned on, the software does in fact use that camcorder - so both work correctly with the software it just is either not recognizing both at the same time (as it did before) or refuses to let me change between them.
I can see both camcorders in the device manager.
I am not even asking for simultaneous recording here...

Yes, uninstalling 4.0.1 or 4.0.2 and rolling back to 4.0.0 should get you this feature back. However, I would strongly urge you not to do so. The patches fixed quite a few crasher bugs, so you'd be taking a big step backward in stability in return for that feature.
If the ability to switch cameras is essential to your workflow--and if you own CS3--I'd recommend that you use CS3 for your switching needs rather than running 4.0.

How to view multiple cameras on a MacBook

REMOTE LEARNING
I'm trying to find a way to view images from 2 or 3 digital camcorders or even webcams on the desktop of my MacBook, then share that desktop live online with music students so they can see closeups of my hands, instrument, etc. Is there a way to do that
I may do desktop sharing through Adobe Connect, but if someone knows a better way, please advise. (Adobe says the frame rate of live camera feeds on my desktop, vs the frame rate of Flash which Connect is based on, may be different, and if so, make the video image poor; anyone verify that?)
Lastly: audio over iChat is crappy with musical instruments. That's using the MacBook's built-in mic. The sound is compressed and distorted. Would using an external mic improve the sound? Is that the nature of iChat? Would Skype sound better?
Lastly: if it's impossible to share multiple camera views like I want, then maybe it's possible to simply hook up a video switcher and change the camera feed being sent to my MacBook and out via Skype. Anyone have facts about doing that?
Thanks!

This might be of use: http://www.apple.com/quicktime/broadcaster/

Problems acquiring and saving multiple camera images using a switch with GigE cameras

Hi Folks,
We are having an issue with connecting 6 GigE cameras via an Ethernet switch. We can acquire and store individual cameras but once we increase the number of cameras we end up with jumpy avi files.
Each camera has been physically labelled and attached to the switch, so camera 1 is attached to port 1, which then corresponds to Cam1 in MAX. When recording multiple files what appears to happen is that the avi file from cam1 actually has images from multiple cameras, as if cam1 is being renamed/allocated on each frmae and each time a different camera is allocated. How can we fix this?
We are new to this so any help or advice would be much appreciated.
Thanks in advance,
Cathy
Attachments:
Camerad.png ‏60 KB
Camera.vi ‏91 KB

I think your problem is caused by using the same image name on each instance of Imaq create. "Grab and Save to AVI Acq" being the string you are using. I am pretty sure If you make each image name unique you wont get image referance problems.
Senior Software Engineer
www.Adansor.com

LIVE VIDEO USING MULTIPLE CAMERA

iam trying live video streaming using Flash lite + FMS3 +
Flash Media Encoder
if i use multiple camera how to switch it..?

Almost every frame grabber displays live images on the screen. I use the
falcon board and control it by it's dll. I give it a handle to a window
by LV to show it there. The DLL supports me with a pointer to the pixel
data as well does IMAQ vision. That's all I need to move a frame into an
IMAQ picture for further processing.
Detlef
Paul schrieb:
> Does someone know how i can watch a live image from my camera in
> labview ? i have imaq, but i don't know if i would be easier using an
> active x component.
> thanxs
>
> --
> [email protected]
>
> Sent via Deja.com http://www.deja.com/
> Before you buy.

LIVE VIDEO - MULTIPLE CAMERA

iam trying live video streaming using FMS3, FME2, and Flash
Lite3
how to create live video streaming , if i use multiple camera
help me,,,,

HI Mate,
Am new to this Flash Media server. I want to Connect my
Microphone and whatever am speaking that should be live on the
Publishing point.
Example:- I create a publishing point and start playing the
song and once the song finished then i will start speaking on
microphone which i have with me (which is connected to my system)
and the speach should go live on publishing point. Can you help in
this regards.
Thanks in Advance.
Vijay

Multiple cameras in FCP

I've read some of the other posts on this and I want to make sure I understand the issue of multiple camera edits in FCP. In order to synch up the cameras on prosumer models (Sony PD170) I would need to manually find a place where the cameras both have the same noise spike or easily identified visual cue and then I can set that as the starting synch point? When I import my video into the computer it comes in as one long stream and then I make subclips using the start/stop markers in the timecode (forgive my laymans explanation). Does that mean I have to manually synch each subclip, or only the start of each large import DV file import?
I'm getting a second camera and I need to know what I'm dealing with before I get off the ground on this. I heard you could do something like bringing all the cameras together, turn them on, and then clap so they all have the same spike to synch on? Does that mean I just have to synch it once to cover all the clips from each dv tape?
Thanks for putting up with a newbie

Brian,
You've asked several questions - some regarding editing, some regarding shooting. I'll tackle the editing part first:
Does that mean I have to manually synch each subclip, or only the start of each large import DV file import?<<</div>
It really depends on what it is you're editing. For example, if its something that was shot all in one take, such as a wedding ceremony, then each of the cameras should have been recording non-stop throughout the duration of the ceremony. When you're ready to edit, in FCP's Log & Capture window, you'd set an IN and OUT point at the point you want to start and end the capture for each tape.
Once the tapes from all cameras have been captured, if you have FCP 5, you can use the multi-clip feature to sync all clips to a common IN point you've set on the clips. Then follow the manual's instructions for multi-clip editing.
If you have an older version of FCP, you'll have to do it manually but it isn't really hard at all. Just takes a bit more time.
Now if you were shooting something with multiple cameras and the cameras were started and stopped/paused at different times, then you'll need to sync up each take from each camera. Kind of the same as above, but with shorter clips.
I heard you could do something like bringing all the cameras together, turn them on, and then clap so they all have the same spike to synch on?<<</div>
It does make it much easier to sync up clips in post if the camera tapes have an easily identifiable sync point. A loud hand clap, a photographer's flash or anything else can work. If the cameras are not close together it is usually better to rely on a visual cue since sound travels so slow ... which is why I often use a battery operated pro flash unit (an old Vivitar 285 left over form my photography days).
-DH

IMovie '08 & Multiple Camera editing

OK, I know I saw/read/heard a blurb SOMEWHERE that mentioned that iMovie 08 was able to perform multiple camera editing now. In other words, I interpret that to mean 2, 3, or more video track lines in the timeline for performing match editing.
So where is the information that confirms this? Was Jobs the one who mentioned it? That's about the only reason I'd upgrade to 08. Otherwise I'll stick with FCStudio. But I like iMovie for the quick and dirty videos I do of the family life.

OK, I know I saw/read/heard a blurb SOMEWHERE that mentioned that iMovie 08 was able to perform multiple camera editing now.
Perhaps what you heard was the fact that imovie can import from a wide range of digital video devices and formats, including tape-based and the latest tapeless camcorders-not multiple cameras at once?
iMovie ’08 Camcorder Support
http://docs.info.apple.com/article.html?artnum=306171
Sue

Multiple Camera Rolls?

Is there a way to create multiple camera rolls directly on the iPhone without the use of a computer or third-party app?

Sorry, but no

MULTIPLE CAMERA

Similar Messages

Maybe you are looking for