Multiple Cards - One Souce of Input

I an considering installing PCI 6601s in 6 PCs used in fMRI experiments.  Generally one of these or perhaps 2 at any given time will be active and receiving an external trigger signal from an fMRI Scanner.  Whilst one USb device might be suitable - it would not give relaible timing information (unless you know better!)
Previousy we had Paralllel Port inputs whihc we could easily plug between the PCs to transmit the signal.  But with 6x I would need 6 breakout cables.  Is there an easier way to plug these into one breakout box?
Regards,

Hi artaxerxes,
What sort of timing information are you hoping to measure?  USB DAQ devices usually have a buffer on them, so if you are looking to timestamp relative events or something of that nature then the non-determinism of the bus transfers usually isn't much of a factor.
If you provide more information about what you need to measure I should be able to give you a better idea of what hardware would be suitable. 
The 6601 uses a 68-pin SCSI connector so the cables should also be fairly interchangeable.  It seems that you could install a 6601 in each of your PCs and use a single breakout box connected to whatever you needed to measure.  You could swap the cable and breakout box as necessary between the 6601s--if I understand correctly it sounds like you were doing something similar previously over the parallel port.  However, I'm not sure I understand correctly so please correct me if I have misunderstood.  Anyway, I'm not necessarily advocating this option as USB might actually be a possibility for your application (depending on the details).
Best Regards,
John Passiak

Similar Messages

  • HT204364 how do I order multiple card or postcard with different images each one in same order?

    how do I order multiple card or postcard with different images each one in same order?
    I keep paying separate shipping cost for each different photo

    That is not an option - with the exeption of photo prints you can only identical items on one order
    LN

  • File Renaming from Multiple Cards

    I’m attempting to use prelude to transfer and rename files from multiple cards to the same folder using the custom text and auto increment options. When I try transfer the media from card 2 to the same folder as card 1 using the same renaming protocol the auto increment starts back at 001 instead of picking up where the numbering left off from the last card. Therefore creating duplicate file names. Does the media from all my cards have to be transferred from the same location and ingested at the same time before I can make this work? All the tutorials have all the media coming from only one card in a “DSLR” workflow. Any insight would be greatly appreciated.

    Hi -
    Thank you for your post. In the current version of Prelude it does not provide the "next in sequence" number as an option. We are implementing that feature now for an  upcoming release. The new feature should provide you with the following capabilities:
      1.  Prelude will provide a new option in the RENAME settings area: "USER DEFINED AUTO INCREMENT". An EDIT field will be available when you select this option and Prelude will automatically populate it with the "NEXT" sequential value based on the last ingest operation performed.
      2.  You can also override the auto-populated value if you choose and set any starting value you wish.
    Hope this will meet your workflow needs. If you'd like to see something else please let us know.
    Regards,
    Michael

  • Importing from multiple Card readers at the same time...

    In Photo Mecahnics I can import multiple cards at one time. Is this possible with LR? If yes, then I will switch 100% to LR.
    Thanks,
    Marc

    Your System my get bogged down?? but you probably can start multiple downloads consecutively. I know you can do consecutive Exports with different presests. Haven't actually heard of anyone doing what you ask.
    I asume you are talking either more than one camera or multiple readers.
    I also don't know how this would effect metadata, if at all.
    Give it a try on a Test Catologue and report back hear. I am sure others might like to know if you are successful.
    Don
    Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
    http://donricklin.blogspot.com/

  • Does iPhoto allow you to order multiple card projects that you designed with your photos all at once?

    I have create multiple cards with iphoto and I want to order them all at once, but it seems to me that I can only order one card of the same design at once. If I order them all separately, that means I have to pay for shipping for each card I created. I don't want to pay so much for the shipping, I think if I order them all at once, the shipping fee will be cheaper. And I will just recieve one big package instead of several small packages. Has anyone able to order all their iphoto projects in one single order?

    It's not possible.
    Regards
    TD

  • Can I place a multiple card order using different cards?

    Can I place a multiple card order using different cards eg personalising Christmas cards for family and friends, but ordering them on the one order?

    No.
    Regards
    TD

  • Edit multiple cards at once in addressbook

    I have many contacts in my addressbook. Now, I want to add a label called 'category' in my addressbook. The category should e.g. be used for work-related cards. I have now three questions:
    1) How can I add a label to my addressbook which can be used for all my cards? Currently, when adding a label, I only get it to work for one single card.
    2) How can I make a smart list with this new label 'category'? I currently see only standard labels, when using a smart list.
    3) Upon adding this label to the addressbook, how can I make sure that multiple cards containing the label 'category' can be filled with 'work' at once? I am only succeeding to fill in the label 'category' once per card.
    Thanks!

    You can add a custom label to a particular category, like Phone, Address, etc. But, you cannot add a new category. Pretty much the categories are defined by the vCard standard, with additions added by Apple for various things.
    I haven't done it in a while, but I believe if you add a custom category to the Template, it will be available for all new cards.
    Smart groups only work with the categories as defined, not the labels within categories.
    You can use applescript to make bulk changes, but it is not simple if you are not familiar.

  • Multiple select options for an input field

    Hi All,
    We have a requirement where in we need to provide multiple select options for an input field in a BSP application and get output relevant to all the given inputs(do not require range).
    Please do let me know how to solve this.
    Thanks & Regards,
    Lavanya .

    Hi,
    The requirement is : Suppose there is a input field PLANT.
    If we give input for plant it gives related output.
    Now if it is required to give 5 or 6 inputs..like plant1,plant2...plant6 and get the output related to all 6 inputs.
    (Like we implement in ABAP)
    Please do let me know how can this be implemented in BSP.
    Thanks & Regards,
    Lavanya.

  • How do I split a single event with many clips into multiples events, one event per date?

    I archived the video from my AVCHD camera into a Final Cut video archive. Later I imported this into iMovie. All the clips from this archive (spanning several months) are dumped into a single event. If I recall, older versions of iMovie would import video into separate events for each day. Then I would go through and give each event a meaningful name (e.g., "Mary's Birthday").
    This is what I would like. Is there a way to split this very long event into multiple events, one for each day that is present in the event?

    Not automatically but with imovie 10 you can create new events with any name you like then move clips into them from other events  (Just like FCP 10.1).   See:
    http://help.apple.com/imovie/mac/10.0/#mov1d890f00b
    You can also choose to display clips in an event grouped by date.
    Geoff

  • How do I update a waveform chart with multiple plots one point at a time?

    Hi,
    I am updating multiple plots one point at a time.  That is, every time I update the chart I have a value for one of the plots.  If I put in a cluster with NaN for each of the charts except the one with the data I can only get individual points on the chart.  I would rather have them connected.
    Any clues?  The only thing I can think of is to delay the update and do interpolation between samples - too complicated for me.
    Thanks

    Are the points within a given plot equally spaced in time?  If so, perhaps you need to maintain your own history of the data and used a waveform graph rewriting the history data to the graph each time.  If the points are unequally spaced, then you will need to do it as an XY graph.

  • Uploading multiple items one at a time - file view resets

    In my work, I need to upload many files, one at a time, using an interface through the browser.
    When I go to upload multiple files, one at a time, using 10.6.2, the Finder takes me back one or two levels down from the file location between uploads. In 10.4, the Finder always took me back to the folder last accessed.
    Is there a Preference, Shareware like TinkerTool, or a Terminal Command I can use so that I always go back to the folder last accessed?

    OK. Wow. I did not realize the question was so obtuse. Feel free to ask for clarification (no reason to be nasty or flame me).
    "what mechanism is being used"
    In my original post, I did say I was uploading via a browser. So I don't know if this clarifies for you or not.
    Using Firefox or Safari.
    Uploading photos, one at a time, to a website that uses the browser (rather than FTP).
    In OS 10.4.11, after each photo, I would upload a second one and the dialog box would open up to the same folder as the previous upload, greatly simplifying the process.
    In OS 10.6.3, after each photo, I would go to upload a second photo and the dialog box would open one level down, or sometimes seemingly randomly, two levels down. This requires me to navigate back to the folder with the photos which greatly increases the amount of time between each upload.
    It would be helpful if I could show photos to explain.
    I am not certain that this really clarifies my original posting. Does this make sense or do you need more info?

  • How can i add multiple validations for a single input box in adf?

    hi,
    i want to add multiple validation for a single input text control in adf like number validation and its existence in database.
    MY JDEV VERSION IS 11.1.1.5.0
    pls help !!!!

    Hi,
    1.I want to validate if the value entered is pure integer
    Option 1-
    select the component and in the Property Inspector, in the "Core" category select a "Converter" format, select javax.faces.Number, if the user put a string, adf show a dialog error or message error...
    Option 2-
    or use the Regular expression:-
    http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_validateRegExp.html
    https://blogs.oracle.com/shay/entry/regular_expression_validation
    Also check this:-
    http://docs.oracle.com/cd/E15523_01/web.1111/b31973/af_validate.htm#BABHAHEI
    Option 3-
    Frank in his great book 'Oracle Fusion Developer Guide' shows a example using a javascript for input which is allowed only for numbers. You can manipulate for your requirement.
    Here is the code:
    function filterForNumbers(evt) {
        //get ADF Faces event source, InputText.js
        var inputField = evt.getSource();
        var oldValue = inputField.getValue();
        var ignoredControlKeys = new Array(AdfKeyStroke.BACKSPACE_KEY, AdfKeyStroke.TAB_KEY, AdfKeyStroke.ARROWLEFT_KEY, AdfKeyStroke.ARROWRIGHT_KEY, AdfKeyStroke.ESC_KEY, AdfKeyStroke.ENTER_KEY, AdfKeyStroke.DELETE_KEY);
        //define the key range to exclude from field input
        var minNumberKeyCode = 48;
        var maxNumberKeyCode = 57;
        var minNumberPadKeyCode = 96;
        var maxNumberPadKeyCode = 105;
        //key pressed by the user
        var keyCodePressed = evt.getKeyCode();
        //if it is a control key, don't suppress it
        var ignoreKey = false;
        for (keyPos in ignoredControlKeys) {
            if (keyCodePressed == ignoredControlKeys[keyPos]) {
                ignoreKey = true;
                break;
        //return if key should be ignored
        if (ignoreKey == true) {
            return true;
        //filter keyboard input
        if (keyCodePressed < minNumberKeyCode || keyCodePressed > maxNumberPadKeyCode) {
            //set value back to previous value
            inputField.setValue(oldValue);
            //no need for the event to propagate to the server, so cancel
            //it
            evt.cancel();
            return true;
        if (keyCodePressed > maxNumberKeyCode && keyCodePressed < minNumberPadKeyCode) {
            //set value back to previous value
            inputField.setValue(oldValue);
            evt.cancel();
            return true;
    2.I want to check if the value exists in my respective DB You must be having EO or VO if you want to validate with database in that case use the solution suggested by Timo.
    Thanks
    --NavinK                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Output of One Query  is input to other Query??

    Hi All,
    How to make output of one query as input to other Query and what are the points to be takeb care of to do it?
    regards,
    murali.
    Message was edited by: Murali

    Hallo
    You got a second query where you also have 0date. Based on the selection on the second query, you get some value for 0date. this values are then passed in background to the first query which will show you the output based on the input date of the first query. You can also have othe variable in the query.
    http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
    I hope everything is fine.
    Mike

  • Fastest way to add multiple images, one after the other, in DW5.5

    There has to be a faster way to add multiple images, one after the other, in a web page rather than just dragging each from the Files tab w/in DW 5.5
    I was a little surprized I couldn't select multiple images and just drag a block and have DW just insert an img tag with empty alts and the source path but maybe there is some options I just haven't found?
    I tried using Bridge to generate a quick html slideshow/gallery but it creates skads of divs and such... I just have to update an older site and was looking for an efficient way to add a bunch of images (random names ugh so just copying-pasting one and changing names is still more manual) that lie next to each other, no breaks inbetween....seems an ideal automated situation.
    I'd settle for an external script or app or something because they come in blocks of 25 approx and I have all my actions in PS set up to size appropriately which is nice so I just wondered if there was something good for this low-level production task.
    Thanks

    Thanks. Yes, I started writing a script but I just wondered if there were hidden gems in DW....so many programs do more than they are intended to do nowadays, I had to ask people who use it more!
    Actually, the fastest was to just dupe one line of code, paste x amount and then just use the pick-wip to point and drag. That at least cut the menu out of the equation.
    I thought I remembered doing a batch insert years ago..maybe in GoLive or before Adobe had DW? DW and GoLive are the only GUI html editors I've ever used..but, may it was just something out of an ealier photoshop...they've taken good stuff out and put good stuff in so many times that I can only remember so much!

  • Bursting - OUTPUT sends one big report, instead of multiple individual ones

    Bursting - OUTPUT sends one big report, instead of multiple individual ones:
    Data File below - shows report has the proper tags for the PP_NUMBER; which should split the job into individula files to be email, instead it creates one large file and emails it to the last email account
    Please help!
    <BCG_PPINVOICE_UK_ALL>
    - <LIST_G_PP_NUMBER>
    - <G_PP_NUMBER>
    <PP_NUMBER>PP100</PP_NUMBER>
    + <LIST_G_INVOICE>
    <PP_TOTAL>-1965</PP_TOTAL>
    <AMOUNT_BEFORE_START>0</AMOUNT_BEFORE_START>
    <PP_INVOICE_CONTACT>HPA - Michael Palmer</PP_INVOICE_CONTACT>
    <ADDRESS1>Porton Down</ADDRESS1>
    <ADDRESS2 />
    <ADDRESS3 />
    <ADDRESS4 />
    <CITY>Salisbury</CITY>
    <COUNTRY>United Kingdom</COUNTRY>
    <EMAIL_ADDRESS>[email protected]</EMAIL_ADDRESS>
    </G_PP_NUMBER>
    - <G_PP_NUMBER>
    <PP_NUMBER>PP101</PP_NUMBER>
    + <LIST_G_INVOICE>
    <PP_TOTAL>0</PP_TOTAL>
    <AMOUNT_BEFORE_START>0</AMOUNT_BEFORE_START>
    <PP_INVOICE_CONTACT>Imperial College - Prof Wells</PP_INVOICE_CONTACT>
    <ADDRESS1>Level 3</ADDRESS1>
    <ADDRESS2>Sherfield Building</ADDRESS2>
    <ADDRESS3 />
    <ADDRESS4 />
    <CITY>London</CITY>
    <COUNTRY>United Kingdom</COUNTRY>
    <EMAIL_ADDRESS>[email protected]</EMAIL_ADDRESS>
    </G_PP_NUMBER>
    - <G_PP_NUMBER>
    <PP_NUMBER>PP102</PP_NUMBER>

    This is EBusiness - XML Publiser (Not Enterprise)
    My Control file is as follows:
    <xapi:requestset type="bursting">
    <xapi:request select="/BCG_PPINVOICE_UKB_ALL/LIST_G_PP_NUMBER/G_PP_NUMBER/PP_NUMBER">
    <xapi:delivery>
    <xapi:email id="/G_PP_NUMBER/${PP_NUMBER}" server="localhost" port="25" from="[email protected]" reply-to="[email protected]">
    <xapi:message id="/G_PP_NUMBER/${PP_NUMBER}" to="${EMAIL_ADDRESS}" attachment="true" subject="Becmanc Coulter Genomics - Prepaid Account Balance ">Dear Prepaid Account holder Please find attached the current statement of your account. If you have any queries regarding the statement, or wish to make a top up of the account please e-mail me directly at [email protected] Kind regards UK Finance Team</xapi:message>
    </xapi:email>
    </xapi:delivery>
    <xapi:document output="output="PP_STATEMENT_${PP_NUMBER}"" output-type="pdf" delivery="/G_PP_NUMBER/${PP_NUMBER}">
    <xapi:template type="rtf" locale="" location="xdo://XBOL.BCG_PPINVOICE_UKB.en.US/?getSource=true"/>
    </xapi:document>
    </xapi:request>
    </xapi:requestset>
    Edited by: user9015277 on Sep 3, 2010 10:29 AM

Maybe you are looking for