"Multiple cd burn" error for 15 minutes of songs!

twice in the last week, with different play lists, I have created small play lists, with total song times
less than 25 minutes.
When I click "Burn CD" it says, "this play list will require multiple cds"
anyone else having this problem? Why would I need multiple cd's for a 25 minute play list?
I am using 320 k MP3's to generate the play list.

Are you sure you only have the one playlist selected, that only contains the 25 minutes of audio when you hit the burn button?

Similar Messages

I am trying to install update 11.0.06 for my Adobe Acrobat XI Pro, but without success multiple times.Get error 1603 each time,

I am trying to install update 11.0.06 for my Adobe Acrobat XI Pro, but without success multiple times.Get error 1603 each time. I have tried disabling my antivirus software without success. I have looked for solutions to error 1603, and have tried what it suggests (empty temp files in Windows, etc.), also without success.There is nothing that mentions Window 8 or 8.1 operating system, though. Is this the issue? Please help.

Hi Dawn,
We might want to have a look at the install logs to determine the cause.
Please try the following basic steps :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Regards,
Rave

I downloaded a trial of photoshop. It runs for a minute or so, then a message displays saying that photoshop has stopped. No error codes, just the message. I have exhausted the "try this" stuff that I can find. Any other ideas would be appreciated.

I downloaded a trial of photoshop. It runs for a minute or so, then a message displays saying that photoshop has stopped. No error codes, just the message. I have exhausted the "try this" stuff that I can find. Any other ideas would be appreciated. I would also like to know what some alternative applications might be. This trial does not give me confidence in Adobe's product.

I saw a similar question deeper into the forum right after I posted. I followed the fix steps and it took care of the problem.
Thanks for getting back to me. I am good to go.

Linked server using kerberos working fine then after inacitive for 10 minutes start receiving the anonymous logon error

Linked server using kerberos working fine but after leaving the session inactive for 10 minutes is startin to fall down to ntlm and receive the anonymous logon error

we are connecting to SQL mgmt studio app published on citrix, using Windows authentication and Kerberos to forward the credentials to the linked servers and avoid the double hop issue, that part is working fine, we already have the Constrained
delegation, SPNs and Active directory settings for the Service accounts and the authentication is working, we can connect to the linked servers without errors, it's only whe the Session get idle when we faced the issue, the citrix team already have verifyed
any timeout setting and they mentioned there is no 10 minute timout setting anywhere, we also looked at the Kerberos AD Global policy settings to see if maybe the kerberos service ticket was expiring, but the configured values are Maximum lifetime
for service ticket 600 minutes Maximum lifetime for user ticket 10 hours Maximum lifetime for user ticket renewal 7 days, if you have any other suggestion please let me know.

Mail gave error message, failure to move e-mail to trash can. Mail has frozen and will not quit and is stopping a machine shutdown. Problem persisted even after power was trend off for a minute.

Mail gave error message, failure to move e-mail to trash can. Mail has frozen and will not quit and is stopping a machine shutdown. Problem persisted even after power was trend off for a minute.Iideas please

OS X: How to quit an unresponsive application using Force Quit
Back up all data. Rebuild the mailbox. Try to delete the message again.

Urjent:Partition error:Logging out user [Admin], active for 0 minutes

Hi all,
Iam using 11
Wen iam creating Transaparent partition its validating successfully , but wen iam saving it its giving error , partition creation failed
Error: 1051037: Logging out user [Admin], active for 0 minutes
and it s giving error reading ddb file
i tried with maxl also but it continiously running for 30 mints , its horrible , actually it takes 2 mints
how can i resolve this issue, any help would be appriciated
thanks
Edited by: user8815661 on 26 avr. 2010 05:18
Edited by: user8815661 on 27 avr. 2010 04:00
Edited by: user8815661 on 3 mai 2010 04:18

Sounds like there is some sort of ddb file corruption. There are many causes, but the quickest fix I have found is usually a file-based deletion of the ddb file on both the source and target side of this partition. The attempt to create a partition on this database will cause a new ddb file to be created. Of course, this is dangerous. You can't have any other partitions on either the source or target side...or they will be deleted by this step. But the only purpose of the ddb file is for partition definitions, and it exists on both source and target.
I've found this happens if one side of a partition (one of the ddbs from source or target) gets the file deleted, or communication is down between the source database server and target database server.

Getting run time error for multiple counter plan

Hi Friends,
Its very critical issue,wherein i am getting run time error for multiple counter plan.
Explanation:While try to change the Call horizon or scheduling period of the counter based plan through IP42 or IP15,systam allowing me to change the data but while saving also i am getting "Maintenance plan has changed" message and once come to the back of the transaction instantly i am getting pop up window saying that "Express document get terminated".However we have been maintaining copy of this data in another client wherein we are not getting any Run time error.
Please find the screen shots for your reference and please let me know how to fix the issue.
Regards,
Srinika

Hi,
Please check reason for update termination in Transaction code SM13.

Multiple Errors for one record in RFC

Hi,
Iam creating RFC.In RFC i have defined output structure in tables.In that structure one field ZMSG and its length is 500.so want to display mutliple errors for one record in ZMSG field output.
Using concantenation...but How to do that?send me Example code...
Regards,
Raj.

clear v_error.
loop on return where type = 'E'.
concatenate v_error return-ZMSG into v_error saperated by spaces respecting blanks.
endloop.
Edited by: Pranu Pranu on May 21, 2010 9:31 AM

Linked server using kerberos working fine then after inactive for 10 minutes start receiving the anonymous logon error

Linked server using kerberos working fine then after inactive for 10 minutes start receiving the anonymous logon error

Hi,
This Could be a double hop problem or some thing could have gone wrong with your SPN
This could also be non trusted Service Account under which your SQL Server is running
Check the following links
http://blogs.technet.com/b/askds/archive/2008/06/13/understanding-kerberos-double-hop.aspx
http://blogs.msdn.com/b/sql_protocols/archive/2006/12/02/understanding-kerberos-and-ntlm-authentication-in-sql-server-connections.aspx
https://technet.microsoft.com/en-us/library/cc739474(v=ws.10).aspx
Hope this helps
Thanks
Bhanu

Disc Burn Error #4450 - This has been going on for six months now!

I cannot burn discs anymore since two upgrades ago. I have tried EVERYTHING, different discs, cleaning out my computer and my iTunes library, making sure nothing was running in the background ... etc. NO luck. I have no clue what to do now and have not been able to burn discs for six months now. Is there an actual support phone number? This is ridiculous! I remember it was a big problem a while ago, and now they want us to upgrade to iTunes 8. If anyone has any suggestions that they can throw my way it would be greatly appreciated. It's possible I might be missing something, but my discs were burning fine before, of course, I upgraded.
Thanks for any help! ... (^_~)

I am having the same problem - has anyone responded to you yet? I am deserate - there is got to be way - unless I need to update my cd drivers??
Let me know if you here anything.

Can't burn - error 4261 - please help!

I keep getting error 4261 when I try to burn audio CDs. I was able to do it for awhile just fine and then it stopped working and each time I try now I get partway through burning when it stops, the disk is ejected, and I get error 4261 message.
Here's what I have tried so far with no luck:
1. Decreased burn speed to 2x, on both iTunes and my CD burner
2. Turned off my virus scanning software (Live One)
3. Tried various makes of disks
4. Tried burning a new mix with just songs that I had ripped from my own CDs (i.e., no "protected" iTunes)
5. Updated to latest version of iTunes (7.3)
6. Tried going back to version 7.2
7. Ran diagnostics:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. Dell DM051
iTunes 7.2.0.34
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
RADEON X300 SE 128MB HyperMemory
RADEON X300 SE 128MB HyperMemory Secondary
Connected Device Information:
DiskDrive, WDC WD2500JS-75NCB1, Bus Type ATA, Bus Address [0,0]
CDROM, HL-DT-ST DVD+-RW GWA4164B, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: HL-DT-ST DVD+-RW GWA4164B, Rev D108
Audio CD in drive.
Found 13 songs on CD, playing time 56:25 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:20:25
Track 3, start time 09:03:00
Track 4, start time 12:43:17
Track 5, start time 16:09:07
Track 6, start time 20:03:02
Track 7, start time 24:53:57
Track 8, start time 29:09:72
Track 9, start time 33:22:52
Track 10, start time 38:01:52
Track 11, start time 42:28:17
Track 12, start time 47:01:25
Track 13, start time 52:02:35
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 10 16 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive D: HL-DT-ST DVD+-RW GWA4164B on CDR media at speed 16X.
Any suggestions???
Dell E510 Windows XP Pro

I got an Error 4261 message on my computer some months ago while attempting to backup my iTunes music ---about Dec. 2006. Hopefully, the problem is now solved. This was a difficult and time consuming issue to resolve. I shall provide some details of this resolution (worked for me) as I know some others are having the same problem. I hope to post this message to others with 4261 errors.
I have a Dimension E510 computer bought in 2006. I am using Windows XP. My CD ROM burner is as follows: HL-DT-ST DVD +-RW GWA4164B. I wonder if you have the same type CD ROM.
At first, several thoughts came to mind. Google? Never listen to music again. Invest in a sledge hammer? I decided to try and fix the problem and would work on this for the next eight months. Recently, I decided that this problem had to go away. I tried various things to correct the problem often with technical assistance as the following indicate:
Changed copy speed//Did a restore on my computer (no help)// reversed restore
Updated iTunes files//Did virus scans
Contacted a company techie—Discovered my warranty was still good. Cdrom driver was updated. We got the iTunes program to copy a disk. Problem solved?? Time passes.
The problem reoccurs. I contacted a techie again. He was able to get another program to copy on the cdrom I was using to copy iTunes music. I was told that I should contact an iTunes rep. $$. Says cdrom hardware is OK. (One can save files (ex. photos) to a new file created on the desk top and copy them to a cdrom---a test method used.)
I read suggestions about updating my BIOS and chipset on the iTunes message board. Not being a techie I wasn’t so sure about this. (Also Techies did not go in this direction.) Time passes.
I didn’t buy music.
I read messages saying that I should backup my iTunes music.
Called techie again. Updated cdrom driver. We were able to copy data using the same cdrom used for the iTunes copy. (Again this was not a fix. It was indicative of an intermittent/partial cdrom failure which occurred over time, and one manifesting itself in iTunes.) I asked him to try to copy another. Amazingly, this copy failed. Something was wrong. Now we’re getting somewhere. Techie eliminated some startup files to try to determine source of a software error, if one. This did not fix the problem.
Techie deleted a couple registry files. I don’t like deleting registry files because they serve a valuable purpose, but I’m not a techie. Later I was told that this is a routine test procedure. (After the fix I would have to do an update of my iTunes program. iTunes has a repair feature which was on my desktop—a holdover from a previous attempt to fix things with an iTunes update. I ran this repair without harming my music files, and this repaired the program.)
Techie said I may have a problem with my current brands of CD-R disks. I bought and tried other brands---four all total. This did not work.
I happened to attempt to copy some pictures as I was interested in having some developed. To my surprise, my computer stopped the copy citing an error with the copy process. The problem now manifested itself with another software program. Heretofore, I could successfully copy pictures using the same cdrom but not iTunes music.
I called the techie again. I told him what I had done and new error in copying other files to the cdrom. We attempted to use other programs to copy music and picture files on the cdrom. (My thinking is, if they had worked, then the cdrom was OK, and the problem was a software problem and likely involving iTunes---software and not hardware Obviously I wanted a cdrom replacement as this would be easier for me than pursuing imbedded software program issues.) We could not get any software programs to copy files to the cdrom in question. This was a clear indication that the cdrom was defective. We likely used up ten CD-R disks in these latest attempts.
Looking back, there was a subtle indication of a problem with the cdrom. There was a problem with one of the songs I had copied to a new disk (No. 24 of 24 songs on a disk). The song was copied with errors. This shouldn’t have happened.
The company replaced cdrom free of charge the next morning in about 5 minutes. Wow!
I tried the new cdrom and began burning iTunes music right away. No 4261 error message. I also copied pictures to the same cdrom without any error messages. I also successfully used other brands of CD-R disks.
I had problems with iTunes and a photo program after cdrom installation but fixed them with updates. I also experienced problems with Windows Media Player and Roxio/Sonic. They didn’t want to recognize the new cdrom in drive (E:). Restore made things worst so I undid this. I spoke to a tech again about these issues as I wasn’t certain of the scope/nature of problem. Issue of ownership of problem came up again. Software vs hardware. We updated both programs with updates from company support pages. This fixed the problem. Point learned here was the need to keep files updated with the latest and greatest. I am skeptical of too many changes because of risk of problems. Now, it seems, I have no choice but to do this---critical changes at least. Many thanks to Techie.
The thought in my mind now is whether performing updates and specifically on Windows Media Player would have fixed the error to begin with. Well, I did run an update on my iTunes prior to, and there are no updates for my photo program. Looking back I would try the updates/repair first (the easy stuff) before I replaced the cdrom. I spent about 9 hours on phone with techies(caution not to delete music). Without warranty, I couldn’t have afforded this. Luckily for me it was a hardware issue.
Replacing the cdrom on my computer fixed the 4261 error on my computer. I hope something here will be of help to some of you who have the same problem.
Kindest regards. 08/14/07

Flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11

flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11

I have had the same problem for WEEKS and I cannot access any sites that use Flash. Flash has been installed on this computer since I bought it in 2012. I have allowed auto updates but for weeks the updates never get past Step 2 - is this because I do NOT want the Google Tool bar? I use NO tool bars as there is only 6 inches of vertical screen space. Is this because I uncheck wanting Chrome as a default browser? It is already installed, I just don't use it. I came to this site and ran the check is it installed and the system says it is either not installed or not enabled. Version 14 just downloaded about 30 minutes ago - but did not progress to Step 3 although a pop up screen came up with a finish button, which I clicked. WHAT is the problem and how do I fix it? If this were just a compatibility bug between IE11 and Adobe they have had plenty of time to fix it.
Stephanie HC

CD Burn Errors - No Burn has succeeded!

I have only started using my three month old iBook for burning CD's this week and discovered that it continually gives a BURN ERROR and spoils the CD-R so that it cannot be burned (on a PC). This happens for all attempts at burning either files from Finder or iTunes with both MP3 and Audio burns - all on well known brand discs. How can this be checked and fixed? I don't see any other problem like this in a quick look on this forum.
NB - Error code from Console is given as 0x80020022 The device failed to respond properly, unable to recover or retry also mentions "Burn Sense: 6/29/00 Unit Attention, Power on, reset or reset bus device occurred".
Apple Hardware Test from CD supplied gives all OK but this does not test the CD drive which is a Matshita CD-RW CW-8124 Revision D80D.
Please help!

Hi - I have followed all the advice above and after cleaning etc tried burning a 450MB set of data files. Same result - CD locks up in spin and after a couple of minutes says an error has occurred. This time it was extremely difficult to get out of lock-up as Finder was totally unresponsive and I had to crash restart with the CD stil spinning. On restart the CD would not eject and was rocking back anbd forwards continually and seeming to lock out any keyboard command. Again after another crash restart and holding the eject button down it did come out just before shutting down. (There's a lot to be said for a PC style eject button!). It gave the same log report under Console as previously reported.
I have used both Sony and Verbatim CD-R but the only thing to note is that they are 700MB discs. Could this be the problem? Do Matshita have a CD driver update website?
I am working overseas so how can I get Apple to sort this out? I am tempted to give up and stick with my Sony PC running XP Pro!
Thanks Ray

Burn error message 261

I too am getting burn error message when I try to burn my playlists to CD since I downloaded iTunes 5.0. I am burning a MP3 CD and there are only 640 MB to be burned to a 700MB CD. I have gone through all of the iTunes suggested solutions. I have contacted Dell (my OEM) and the manufacturer of my CD-R/RW drive (Samsung). I upgraded the latest firmware for my computer and CD Drive. I still get the same message...burn failed for unknown reason...error message 261. It works in Windows Media. What gives? Is there a fix? Seemingly, quite a few other customers are having the same problem. HELP!Apple is there a fix on the way?
Here are my diagnostic results:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
iTunes 5.0.0.35
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: AFS2K (3.1.20.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce FX 5200 \GeForce FX 5200
IDE\DiskMaxtor6Y160M0_________________________YAR51HW0, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSAMSUNGCD-R/RW_SW-252S_________________R954___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SAMSUNG CD-R/RW SW-252S, Rev R954
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 4.
The drive CDRW speeds are: 4.

Hello Armando,
I'm not too sure if I could help you since you're running a Windows machine but if you want some reliable answers, could you re-post your question in the iTunes for Windows forum? I'm sure the people on that forum would help you better. Sorry about that.
Just FYI, you posted this thread on the iTunes for Mac forum.

CD Burn Error 4450

I have been getting 4450.
Today I burned through 14 discs (three different brands) attempting to copy various playlists. It would kick in for a minute or so and then spit out the CD, saying that the burn speed was too high or giving me error prompt 4450.
I tried kicking down the burn speed to 4x -- even though it's always been set at ''maximum possible'' -- and same thing.
A similar thing happened when I tried Windows Media Player.
But I was able to burn a CD using Roxio.
Trouble is, I want access to my downloaded music on iTunes.
Any ideas?

Oh, and here are my diagnostics. This is driving me nuts!
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation Inspiron 8200
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
LowerFilters: AFS2K (3.1.21.0), PXHELP20 (2.0.0.0), CDR4_XP (6.2.0.110),
UpperFilters: Cdralw2k (6.2.0.110), pwd_2k (6.1.1.18), GEARAspiWDM (2.0.6.1),
Video Driver: Dell 8200\GeForce2 Go
IDE\DiskTOSHIBAMK4019GAX_______________________FA002D_, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STRW/DVD_GCC-4240N_______________D110___, Bus Type ATA, Bus Address [1,0]
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
D: HL-DT-ST RW/DVD GCC-4240N, Rev D110
Audio CD in drive.
Found 10 songs on CD, playing time 39:12 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 02:13:40
Track 3, start time 06:09:05
Track 4, start time 09:19:30
Track 5, start time 13:48:70
Track 6, start time 17:15:30
Track 7, start time 21:45:22
Track 8, start time 26:26:54
Track 9, start time 30:55:02
Track 10, start time 35:28:10
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 10 16 24.
The drive CDRW speeds are: 4 10 16.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: HL-DT-ST RW/DVD GCC-4240N on CDR media at speed 4X.

"Multiple cd burn" error for 15 minutes of songs!

Similar Messages

Maybe you are looking for