Multiple Certs on gateway? (need to add an intermediate CA).

Has anyone successfully installed multiple certificates on the iPS gateway?
If so, how?
There doesn't seem to be any way to do this with the tool provided. We
have a need to provide an Intermediate CA cert to support the International
Step-Up (to allow 40 bit browsers to step-up to 128bit) - using a Verisign
Global cert.
TIA,
Gary Beshara
BP

Hi,
you can install multiple certificates on iPS Gateway but you can access the Gateway with only one certificate which you have mentioned in your ".nickname" file. By changing the name of the certificate in the ".nickname" file you can access the gateway with different certificates.

Similar Messages

Game server, home network, SD2005 switch, need to add wireless...

OK, I have my cable modem going directly to game server (PC running windows xp as game host), PC has 2 NIC's. Second NIC goes to SD2005 switch to 2 home gaming PC's, printer, playstation 3. Goal was to have gaming server direct access to internet.... Allow our PC's to access games without going outside intranet. How do I hook up WRT310N to the sd2005 and then run the Printer, Playstation3 off the WRT310N??? Or am I making this way to complicated???lol
I also have a ethernet hookup for a workbench too that I swap out connections on the SD2005 for repairing PC's...
So, In a nutshell
PC gaming host
2 gaming PC's
Ethernet printer
Ethernet Playstation3
Ethernet connection to workbench
Need to add the WRT310N v2 to get wireless
Need gigabit access to internet for all but printer & Playstation
Have SD2005 gigabit switch
1 gaming PC needs access to website host for FTP without all the security problems (which has been a pain with Vista)
SO, WHAT WOULD YOU DO.... I know just enough to make a mess...lol

As you want the game server directly connected to your internet connection it must operate as your internet gateway for all other devices. For that, you have to enable ICS (Internet Connection Sharing) on the game server. Use the Windows wizard to set it up. Share the internet netconnection from the 1st NIC to the LAN on the 2nd NIC. Of course, with this kind of setup your game server must be up and running whenever you want to use your LAN.
Your game server will use static IP 192.168.0.1 with subnet mask 255.255.255.0 on the 2nd NIC and provides DHCP.
Now connect the SD2005 to the 2nd NIC. Wire another computer to the SD2005 and it should get an IP address 192.168.0.* and should have internet through the game server.
Set up the WRT as simple wireless access point. Wire a computer to a LAN port of the WRT. Open the web interface http://192.168.1.1/ Now change the LAN IP address of the WRT from 192.168.1.1 to 192.168.0.254 and turn off the DHCP server. Save settings. You'll loose the connection. Unplug the computer. Now wire one of the LAN ports of the WRT to the SD2005. Do not use the internet port of the WRT!
That's it. Don't forget to configure the wireless on the WRT through the web interface now at http://192.168.0.254/
Your LAN computers can access the game server directly on the LAN IP address 192.168.0.1 or through its public IP address.

HT3775 what soft ware do i need to add to play a MOD.mpg file on my macbook pro???

i am trying to play a video and the message says it (quicktime) cant support this file and i more need to add on?
thx!

either file is broken or you need a codec. Alternatively you may go to an App Store and look for a player that supports multiple video formats i.e. by typing player to the App Store's search field you should get quite a few results.

I need to add a new 2811 MGCP

I have a clouster 4.1.2 and need to add a new office (external)which has a independient numeric plan.
Some body can refresh me the rigth flow to configurate, becouse I was think:
1.- Add Gateway to CCM clouster
2.- Add a new translation patern to offices phones
3.- Route patterns to external office
4.- Route patterns to international and long distance calls
5.- Superviability
bud I don't know if I need a route group, a route list or create a zone
Thank

IF you point a route pattern to the gateway directly, you cannot add that gateway into a route group. You will have to
a. either delete all route patterns that are pointed to the gateway in question
b. create route group, add gateway to route group
c. add route group to route list
d. add route patterns and point them to the route list.
OR
a. add a dummy h323 gateway.
b. repoint all route patterns to this h323 gateway. (temporary)
c. add a route group and add the mgcp gateway in question to the route group, and add route group to a route list.
d. repoint all route patterns to the route list
e. delete h323 gateway.
On the issue with calls not going out, I would check
a. sh isdn status
b. see if gateway is registered to callmanager
c. sh ccm-manager
d. debug isdn q931 - to see whats the cause code for calls not going out.
e. if route patterns have any partitions configured, then that partition need to be accessible in the CSS configured on the phone.
HTH
Sankar
PS: please remember to rate posts!

Do you need to add a router to get wi fi, on an imac desktop?

do you need to add a router to get wi fi, on an imac desktop?

Depends. How do you get your Internet connection and does your provider install a gateway modem a gateway/router modem?

PLD Production Order need to add BOM lines

I have a need to add the comments from the BOM lines table (ITT1) to the production order.
As soon as I add the field (copied the definition from the BOM report) the lines go wild. I go from 5 lines to 35 lines with the production components printing multiple times.
Any body have a way to link the BOM lines to the production order lines so I get the right lines printing?

I would suggest you create a user field at the Production Order Rows and use the following formatted search to copy the comments from the BOM definitions.
This user field can be easily added to the PLD and will help avoid duplicating rows which you are currently facing.
SELECT T0.Comment FROM [dbo\].[ITT1\] T0 WHERE T0.Code = $\[$37.4.0] AND T0.Father = $\[$6.0.0]
Suda

Need to add contact with 2 email addresses

I have a contact in my address book for whom I need to add 2 email addresses in the same field. I know I can add multiple addresses, but that gets confusing for this contact, because I need to send every email to him at both addresses. I tried adding both addresses in the same field, separated by both a comma and a semicolon, and when I tried to sent the message Mail told me it was an invalid address. Is there any way to do this?

There is no reason why you should not be able to enter both addresses in the Address Book as two separate addresses on the same contact card (e.g. "home" and "work") and when typing in the To: field of a Mail message, start entering as one address at a time. If the addresses exist in Address Book or previous recipients list, each will "quick fill". After first is entered (as a "bubbled" address), enter a comma then start entering second address. If either address is not in Address Book or previous recipient list, separate each entry with comma and spacebar while typing.
If launching Address Book as a helper application from within the Mail application, single-click each email address (not the name) and either drag each, one at a time, to the To: field or click the To: button in Address book helper app. Repeat with other address. You can't snag 'em both at once.
I just tried all of the above so these methods work here.

Need to Add a button in ALV Tool Bar

Hi,
I have a requirement where in i need to add a button to a standard ALV report. Its using the class CL_GUI_ALV_GRID. There is a Badi for the report. The Report is co05n and the Badi is WORKORDER_INFOSYSTEM . I am getting the handle of
CL_GUI_ALV_GRID object reference before screen display. Any guidance on how to add new button now to that toolbar?
Any help will be rewarded.
Thank you.
regards,
Deepthi lakshmi.A.

Dear Deepthi Lakshmi.A.,
Refer the standard program BCALV_GRID_05                  Add a Self-Defined Button to the Toolbar.
PROGRAM BCALV_GRID_05.
Purpose:
~~~~~~~~
Demonstrate the creation of an own toolbar button.
To check program behavior
~~~~~~~~~~~~~~~~~~~~~~~~~
The report shows a list of flights of one airline.
Select one or more lines and press the 'Detail'-Button to popup
a dialog window with related bookings.
Essential steps (Search for '§')
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1.Apply steps for event handling for events TOOLBAR and
USER_COMMAND (see example for print events)
2.In event handler method for event TOOLBAR: Append own functions
by using event parameter E_OBJECT.
3.In event handler method for event USER_COMMAND: Query your
function codes defined in step 2 and react accordingly.
4.Call method 'set_toolbar_interactive' to raise event TOOLBAR.
INCLUDE .
Predefine a local class for event handling to allow the
declaration of a reference variable before the class is defined.
CLASS lcl_event_receiver DEFINITION DEFERRED.
DATA: ok_code LIKE sy-ucomm,
      gt_sflight TYPE TABLE OF sflight,
      gt_sbook TYPE TABLE OF sbook,
      g_repid LIKE sy-repid,
      g_max type i value 100,
      gs_layout   TYPE lvc_s_layo,
      cont_on_main   TYPE scrfname VALUE 'BCALVC_TOOLBAR_D100_C1',
      cont_on_dialog TYPE scrfname VALUE 'BCALVC_TOOLBAR_D101_C1',
      grid1 TYPE REF TO cl_gui_alv_grid,
      grid2 TYPE REF TO cl_gui_alv_grid,
      custom_container1 TYPE REF TO cl_gui_custom_container,
      custom_container2 TYPE REF TO cl_gui_custom_container,
      event_receiver TYPE REF TO lcl_event_receiver.
Set initial dynpro
SET SCREEN 100.
LOCAL CLASSES: Definition
*===============================================================
class lcl_event_receiver: local class to
                        define and handle own functions.
Definition:
~~~~~~~~~~~
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    METHODS:
    handle_toolbar
        FOR EVENT toolbar OF cl_gui_alv_grid
            IMPORTING e_object e_interactive,
    handle_user_command
        FOR EVENT user_command OF cl_gui_alv_grid
            IMPORTING e_ucomm.
PRIVATE SECTION.
ENDCLASS.
lcl_event_receiver (Definition)
*===============================================================
LOCAL CLASSES: Implementation
*===============================================================
class lcl_event_receiver (Implementation)
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
§ 2.In event handler method for event TOOLBAR: Append own functions
by using event parameter E_OBJECT.
    DATA: ls_toolbar TYPE stb_button.
E_OBJECT of event TOOLBAR is of type REF TO CL_ALV_EVENT_TOOLBAR_SET.
This class has got one attribute, namly MT_TOOLBAR, which
is a table of type TTB_BUTTON. One line of this table is
defined by the Structure STB_BUTTON (see data deklaration above).
A remark to the flag E_INTERACTIVE:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        'e_interactive' is set, if this event is raised due to
        the call of 'set_toolbar_interactive' by the user.
        You can distinguish this way if the event was raised
        by yourself or by ALV
        (e.g. in method 'refresh_table_display').
        An application of this feature is still unknown...
append a separator to normal toolbar
    CLEAR ls_toolbar.
    MOVE 3 TO ls_toolbar-butn_type.
    APPEND ls_toolbar TO e_object->mt_toolbar.
append an icon to show booking table
    CLEAR ls_toolbar.
    MOVE 'BOOKINGS' TO ls_toolbar-function.
    MOVE icon_employee TO ls_toolbar-icon.
    MOVE 'Show Bookings'(111) TO ls_toolbar-quickinfo.
    MOVE 'Detail'(112) TO ls_toolbar-text.
    MOVE ' ' TO ls_toolbar-disabled.
    APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
METHOD handle_user_command.
§ 3.In event handler method for event USER_COMMAND: Query your
function codes defined in step 2 and react accordingly.
    DATA: lt_rows TYPE lvc_t_row.
    CASE e_ucomm.
      WHEN 'BOOKINGS'.
        CALL METHOD grid1->get_selected_rows
                 IMPORTING et_index_rows = lt_rows.
        CALL METHOD cl_gui_cfw=>flush.
        IF sy-subrc ne 0.
add your handling, for example
          CALL FUNCTION 'POPUP_TO_INFORM'
               EXPORTING
                    titel = g_repid
                    txt2 = sy-subrc
                    txt1 = 'Error in Flush'(500).
        else.
                  perform show_booking_table tables lt_rows.
        ENDIF.
    ENDCASE.
ENDMETHOD.                           "handle_user_command
ENDCLASS.
lcl_event_receiver (Implementation)
*===================================================================
      FORM EXIT_PROGRAM                                             *
FORM exit_program.
The instance grid2 is freed not until the program exits from the
main screen.
(It is created only once during the first selection of SBOOK,
no matter how many times the second window is called).
CALL METHOD custom_container1->free.
IF not custom_container2 is initial.
    CALL METHOD custom_container2->free.
ENDIF.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc ne 0.
add your handling, for example
    CALL FUNCTION 'POPUP_TO_INFORM'
         EXPORTING
              titel = g_repid
              txt2 = sy-subrc
              txt1 = 'Error in Flush'(500).
ENDIF.
LEAVE PROGRAM.
ENDFORM.
*&      Module PBO_100 OUTPUT
      text
MODULE pbo_100 OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
g_repid = sy-repid.
IF custom_container1 is initial.
select data from table SFLIGHT
    PERFORM select_table_sflight CHANGING gt_sflight.
create a custom container control for our ALV Control
    CREATE OBJECT custom_container1
        EXPORTING
            container_name = cont_on_main
        EXCEPTIONS
            cntl_error = 1
            cntl_system_error = 2
            create_error = 3
            lifetime_error = 4
            lifetime_dynpro_dynpro_link = 5.
    IF sy-subrc ne 0.
add your handling, for example
      CALL FUNCTION 'POPUP_TO_INFORM'
           EXPORTING
                titel = g_repid
                txt2 = sy-subrc
                txt1 = 'The control could not be created'(510).
    ENDIF.
create an instance of alv control
    CREATE OBJECT grid1
           EXPORTING i_parent = custom_container1.
Set a titlebar for the grid control
    gs_layout-grid_title = 'Flights'(100).
allow to select multiple lines
    gs_layout-sel_mode = 'A'.
    CALL METHOD grid1->set_table_for_first_display
         EXPORTING i_structure_name = 'SFLIGHT'
                   is_layout        = gs_layout
         CHANGING it_outtab        = gt_sflight.
->Create Object to receive events and link them to handler methods.
When the ALV Control raises the event for the specified instance
the corresponding method is automatically called.
    CREATE OBJECT event_receiver.
    SET HANDLER event_receiver->handle_user_command FOR grid1.
    SET HANDLER event_receiver->handle_toolbar FOR grid1.
§ 4.Call method 'set_toolbar_interactive' to raise event TOOLBAR.
    CALL METHOD grid1->set_toolbar_interactive.
ENDIF.                               "IF grid1 IS INITIAL
CALL METHOD cl_gui_control=>set_focus EXPORTING control = grid1.
ENDMODULE.                             " PBO_100 OUTPUT
*&      Module PAI_100 INPUT
      text
MODULE pai_100 INPUT.
CASE ok_code.
    WHEN 'EXIT'.
      PERFORM exit_program.
ENDCASE.
CLEAR ok_code.
ENDMODULE.                             " PAI_100 INPUT
*&      Module PBO_0101 OUTPUT
      text
MODULE pbo_0101 OUTPUT.
IF custom_container2 is initial.
(the data from sbook is already selected)
create a custom container control for our ALV Control
    CREATE OBJECT custom_container2
        EXPORTING
            container_name = cont_on_dialog
        EXCEPTIONS
            cntl_error = 1
            cntl_system_error = 2
            create_error = 3
            lifetime_error = 4
            lifetime_dynpro_dynpro_link = 5.
    IF sy-subrc ne 0.
add your handling, for example
      CALL FUNCTION 'POPUP_TO_INFORM'
           EXPORTING
                titel = g_repid
                txt2 = sy-subrc
                txt1 = 'The control could not be created'(510).
    ENDIF.
create an instance of alv control
    CREATE OBJECT grid2
           EXPORTING i_parent = custom_container2.
change title
    gs_layout-grid_title = 'Bookings'(101).
    gs_layout-sel_mode = ' '.
    CALL METHOD grid2->set_table_for_first_display
         EXPORTING i_structure_name = 'SBOOK'
                   is_layout        = gs_layout
         CHANGING it_outtab        = gt_sbook.
ELSE.
    CALL METHOD grid2->refresh_table_display.
ENDIF.                               "IF custom_container2 IS INITIAL.
CALL METHOD cl_gui_control=>set_focus EXPORTING control = grid2.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc ne 0.
add your handling, for example
    CALL FUNCTION 'POPUP_TO_INFORM'
         EXPORTING
              titel = g_repid
              txt2 = sy-subrc
              txt1 = 'Error in Flush'(500).
ENDIF.
ENDMODULE.                             " PBO_0101 OUTPUT
*&      Form SELECT_TABLE_SFLIGHT
      text
     <--P_GT_SFLIGHT text
FORM select_table_sflight CHANGING p_gt_sflight LIKE gt_sflight[].
SELECT * FROM sflight INTO TABLE p_gt_sflight up to g_max rows.
ENDFORM.                               " SELECT_TABLE_SFLIGHT
*&      Form SELECT_TABLE_SBOOK
      text
     -->P_LS_SFLIGHT text
     <--P_GT_SBOOK text
FORM select_table_sbook USING    p_ls_sflight LIKE LINE OF gt_sflight
                        CHANGING p_gt_sbook LIKE gt_sbook[].
DATA: lt_sbook LIKE gt_sbook[].
Select data from sbook according to a line of sflight
and append that data to table p_gt_sbook
SELECT * FROM sbook INTO TABLE lt_sbook
         WHERE carrid = p_ls_sflight-carrid
         AND    connid = p_ls_sflight-connid
         AND    fldate = p_ls_sflight-fldate.
APPEND LINES OF lt_sbook TO p_gt_sbook.
ENDFORM.                               " SELECT_TABLE_SBOOK
*&      Module PAI_0101 INPUT
      text
MODULE pai_0101 INPUT.
CASE ok_code.
    WHEN 'RETURN'.
      LEAVE TO SCREEN 0.
ENDCASE.
CLEAR ok_code.
ENDMODULE.                             " PAI_0101 INPUT
*&      Form show_booking_table
      text
     -->P_ET_INDEX_ROWS text
FORM show_booking_table TABLES p_et_index_rows
                                STRUCTURE lvc_s_row.
DATA: ls_selected_line LIKE lvc_s_row,
        lf_row_index TYPE lvc_index,
        ls_sflight LIKE LINE OF gt_sflight.
CLEAR gt_sbook[].
LOOP AT p_et_index_rows INTO ls_selected_line.
    lf_row_index = ls_selected_line-index.
read selected row from internal table gt_sflight
    READ TABLE gt_sflight INDEX lf_row_index INTO ls_sflight.
select corresponding lines of table sbook
and append new lines to global table
    PERFORM select_table_sbook USING ls_sflight
                               CHANGING gt_sbook.
ENDLOOP.
call dialog screen and display new alv control
CALL SCREEN 101 STARTING AT 10 5.
ENDFORM.                               " show_booking_table
Regards,
Naveen.

Do we need to add new datafile.

There is one and only one datafile in my database. Now its size reached 3.6 GB. I already set it as Autoextend.
At this stage, do we need to add one more datafile ?

That depends...
Would having multiple files allow you to spread I/O over more spindles?
In the event of a disaster, how quickly can you restore a 3.6 GB file? If your data files were 2 GB, how would that affect the time it would take to recover from the loss of a data file?
Does your operating system have a limit on the size of a single file?
Personally, I would tend perfer a few 1 - 2 GB data files to a single large (and growing) file, but there may be no benefits to this in your environment.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Sun One 6.1 reverse proxy with multiple certs

We are using Sun One Web Server 6.1sp6 as a reverse proxy without the passthrough plugin. We also have multiple certs and not a global cert and what we are seeing is the data getting "staged" on the web server before moving on to the destination (which obviously halves throughput). Some research tells us that this staging is happening because it needs to re-encrypt the packets for the next cert.
Is there any way besides having a global cert that we can get around this? Would using the passthrough plugin help?
Thanks,
Don

The thing is that it apparently doesn't do it on the fly, which is why I was wondering if the passthrough plug in would help. In other words, if I am sending a 10mb file through to the destination server (there's a weblogic server on the back end with a different cert that I want to do the real processing), the web server waits until it gets all 10mb then resends it. Seems it should do the encrypt/decrypt on a packet level to me.
As far as the config, I didn't set it up, I'm just trying to get it to work :)
Here are the configs, if it would help. If there's something set up wrong here, please feel free to point it out!
Thanks,
Don
magnus.conf
# The NetsiteRoot, ServerName, and ServerID directives are DEPRECATED.
# They will not be supported in future releases of the Web Server.
NetsiteRoot /iplanet/servers
ServerName rpserver.testdomain.com
ServerID https-rpserver.testdomain.com
RqThrottle 256
DNS off
Security on
PidLog /iplanet/servers/https-rpserver.testdomain.com/logs/pid
User iplanet1
StackSize 131072
TempDir /tmp/https-rpserver.testdomain.com-a9dd9515
PostThreadsEarly off
KernelThreads off
ChunkedRequestBufferSize 0
LogVerbose on
LogVsId off
AsyncDNS off
KeepAliveTimeout 10
UseNativePoll on
Init fn="load-modules" funcs="wl_proxy,wl_init" shlib=/iplanet/servers/plugins/nsapi/wls923/libproxy128_61.so
Init fn="wl_init"
Init fn="load-modules" shlib="/iplanet/servers/bin/https/lib/libj2eeplugin.so" shlib_flags="(global|now)"
Init fn="stats-init" profiling="on"
obj.conf
# The NetsiteRoot, ServerName, and ServerID directives are DEPRECATED.
# They will not be supported in future releases of the Web Server.
NetsiteRoot /iplanet/servers
ServerName rpserver.testdomain.com
ServerID https-rpserver.testdomain.com
RqThrottle 256
DNS off
Security on
PidLog /iplanet/servers/https-rpserver.testdomain.com/logs/pid
User iplanet1
StackSize 131072
TempDir /tmp/https-rpserver.testdomain.com-a9dd9515
PostThreadsEarly off
KernelThreads off
ChunkedRequestBufferSize 0
LogVerbose on
LogVsId off
AsyncDNS off
KeepAliveTimeout 10
UseNativePoll on
Init fn="load-modules" funcs="wl_proxy,wl_init" shlib=/iplanet/servers/plugins/nsapi/wls923/libproxy128_61.so
Init fn="wl_init"
Init fn="load-modules" shlib="/iplanet/servers/bin/https/lib/libj2eeplugin.so" shlib_flags="(global|now)"
Init fn="stats-init" profiling="on"
server.xml
<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE SERVER PUBLIC "-//Sun Microsystems Inc.//DTD Sun ONE Web Server 6.1//EN" "file:///iplanet/servers/bin/https/dtds/sun-web-server_6_1.dtd">
<SERVER qosactive="false">
<PROPERTY name="docroot" value="/iplanet/servers/docs"/>
<PROPERTY name="accesslog" value="/iplanet/servers/https-rpserver.testdomain.com/logs/access"/>
<PROPERTY name="user" value=""/>
<PROPERTY name="group" value=""/>
<PROPERTY name="chroot" value=""/>
<PROPERTY name="dir" value=""/>
<PROPERTY name="nice" value=""/>
<LS id="ls1" port="443" servername="rpserver.testdomain.com" defaultvs="https-rpserver.testdomain.com" security="on" ip="any" blocking="false" acceptorthreads="2">
<SSLPARAMS servercertnickname="Server-Cert" ssl2="off" ssl2ciphers="-rc4,-rc4export,-rc2,-rc2export,-desede3,-des" ssl3="on" tls="on" ssl3tlsciphers="-rsa_rc4_128_sha,+rsa_rc4_128_md5,-rsa_rc4_56_sha,-rsa_rc4_40_md5,+rsa_3des_sha,+rsa_des_sha,-rsa_des_56_sha,-rsa_rc2_40_md5,-rsa_null_md5,-fortezza,-fortezza_rc4_128_sha,-fortezza_null,+fips_3des_sha,-fips_des_sha" tlsrollback="on" clientauth="off"/>
</LS>
<MIME id="mime1" file="mime.types"/>
<ACLFILE id="acl1" file="/iplanet/servers/httpacl/generated.https-rpserver.testdomain.com.acl"/>
<VSCLASS id="vsclass1" objectfile="obj.conf" rootobject="default" acceptlanguage="false">
<VS id="https-rpserver.testdomain.com" connections="ls1" mime="mime1" aclids="acl1" urlhosts="rpserver.testdomain.com" state="on">
<PROPERTY name="docroot" value="/iplanet/servers/docs"/>
<USERDB id="default"/>
<SEARCH>
<WEBAPP uri="/search" path="/iplanet/servers/bin/https/webapps/search" enabled="true"/>
</SEARCH>
</VS>
</VSCLASS>
<JAVA javahome="/iplanet/servers/bin/https/jdk" serverclasspath="/iplanet/servers/bin/https/jar/webserv-rt.jar:${java.home}/lib/tools.jar:/iplanet/servers/bin/https/jar/webserv-ext.jar:/iplanet/servers/bin/https/jar/webserv-jstl.jar:/iplanet/servers/bin/https/jar/ktsearch.jar" classpathsuffix="" envclasspathignored="true" nativelibrarypathprefix="" debug="false" debugoptions="-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n" dynamicreloadinterval="-1">
<JVMOPTIONS>-Djava.security.auth.login.config=/iplanet/servers/https-rpserver.testdomain.com/config/login.conf</JVMOPTIONS>
<JVMOPTIONS>-Djava.util.logging.manager=com.iplanet.ias.server.logging.ServerLogManager</JVMOPTIONS>
<JVMOPTIONS>-Xmx256m</JVMOPTIONS>
<SECURITY defaultrealm="native" anonymousrole="ANYONE" audit="false">
<AUTHREALM name="file" classname="com.iplanet.ias.security.auth.realm.file.FileRealm">
<PROPERTY name="file" value="/iplanet/servers/https-rpserver.testdomain.com/config/keyfile"/>
<PROPERTY name="jaas-context" value="fileRealm"/>
</AUTHREALM>
<AUTHREALM name="native" classname="com.iplanet.ias.security.auth.realm.webcore.NativeRealm">
<PROPERTY name="jaas-context" value="nativeRealm"/>
</AUTHREALM>
<AUTHREALM name="ldap" classname="com.iplanet.ias.security.auth.realm.ldap.LDAPRealm">
<PROPERTY name="directory" value="ldap://localhost:389"/>
<PROPERTY name="base-dn" value="o=isp"/>
<PROPERTY name="jaas-context" value="ldapRealm"/>
</AUTHREALM>
</SECURITY>
<RESOURCES/>
</JAVA>
<LOG file="/iplanet/servers/https-rpserver.testdomain.com/logs/errors" loglevel="info" logtoconsole="true" usesyslog="false" createconsole="false" logstderr="true" logstdout="true" logvsid="false"/>
</SERVER>

Do I need to add Base Station MAC address to list?

Hi, If I choose to use MAC address filtering on my Airport Extreme Time Capsule, do I need to add the wireless MAC address of the Base Station to the list of allowed MAC addresses??? I'd feel real bad if I set up a list, didn't include the base station's MAC address and then could never get in to the network again because I, in effect, locked myself out??? I doubt that address needs to be included but I would like some feedback on that.
Second, does the one MAC address filter list apply to the Guest Network as well if I should choose to turn it on??? If that was the case, I would just turn off MAC address filtering why guests were present.
thanks.. bob

If I choose to use MAC address filtering on my Airport Extreme Time Capsule, do I need to add the wireless MAC address of the Base Station to the list of allowed MAC addresses???
No. Timed Access would be for wireless devices....computers, mobile devices, printer, etc., that are connecting to the Time Capsule. The Time Capsule does not connect to itself in this regard.
I'd feel real bad if I set up a list, didn't include the base station's MAC address and then could never get in to the network again because I, in effect, locked myself out???
Sometimes, users lock themselves out by mistake by entering incorrect times for devices to connect, and they often forget that they can connect to the base station using an Ethernet connection and get back in that way.....since Timed Access only applies to devices that connect using wireless.
does the one MAC address filter list apply to the Guest Network as well if I should choose to turn it on???
Yes

VA01 Sales order - Header-- Accounting tab need to add a field

Dear All,
The requirement is,
1. I need to add a field in Sales order.
Path for the same is as follows:
VA01> Goto> Header--> Accounting tab
2. The field will be a date field that needs to calculate date on.
a)create a new field. ex - zchdt (chq due date)
b)when customers enters value in Assignment,
i.e vbak-zuonr
after that trigger logic is
3.vabk-kunnr = knvv-kunnr
a)sy-date + knvv-kvgr2 (exclude sundays)
example - 14 sept + 30 days = 14th october
should populate value - 14th october i.e. field (zchdt)
4. This activity needs to be triggered before the sales order is saved.
kindly know whether this is possible or not.
if possible how & which exit & also with example code.
if you could give me your contact(cell no).
Regards,
Nagendra D.S.
Mobile - +91 9819899082

Hi All,
VA01 Sales order - Header--> Accounting tab need to add a field. field name - zchdt(cheque due date)
when customer enters value in Assignment i.e zuonr & after that trigger logic is
1. vbak-kunnr = knvv-kunnr
2. sysdat + knvv-kvgr2 (exclude sundays)
example - 16 sept + 30days = 16 oct
in field zchdt value 16 oct as to populate
Pls help me in the code.
Regards
Nagendra

Need to add number of days to users end date.

Hi,
I have a code where we are adding number of days(30) to current date and then updating user's end date in IDM DB.
Now we have a requirement where we need to add number of days(30) to existing end date of user instead of adding to current date.
*public String incrementDate(int daysToAdd)
     // Start date
     log.info("NotifyLastDayOfService::incrementDate(): Enter");
     SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd 00:00:00");
     Calendar c = Calendar.getInstance();
     c.add(Calendar.DATE, daysToAdd); // number of days to add
     String newDate = sdf.format(c.getTime());
     log.info("NotifyLastDayOfService::incrementDate(): Exit");
     return newDate;
Have any body implemented this scenario?
Please suggest.
Thanks,
Kalpana.

Hi Nayan,
Here is the code:
System.out.println("----inside increment date method-----");
          HashMap<String, String> hm = new HashMap<String, String>();
          HashMap<String,Date> modifyMap=new HashMap<String,Date>();
          SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd 00:00:00");
          tcResultSet usrList = null;
     String enddate = null;
     hm.put("Users.Key",usrKey );
     try {
     usrList = this.usrIntf.findUsers(hm);
     usrList.goToRow(0);
     Date endDate =usrList.getDate("Users.End Date");
     System.out.println("-----users end date-----"+endDate);
     String userEndDate=sdf.format(endDate);
     System.out.println("-----String value of users end date-----"+userEndDate);
     Calendar cal=null;
     System.out.println("-----Calender date-----"+cal);
     cal.setTime(endDate);
     System.out.println("-----end date-----"+endDate);
cal.add(Calendar.DATE, Integer.parseInt(daysToAdd)); // number of days to add
Date newEnddate = cal.getTime();
System.out.println("-----new end date-----"+newEnddate);
//usrList.setEndDate(Edate);
modifyMap.put(userEndDate,newEnddate);
usrIntf.updateUser(usrList, modifyMap);
System.out.println("updated user's end date in OIM DB");
//System.out.println("-----updated user's end date in OIM DB-----");
logger.info("NotifyLastDayOfService::incrementDate(): Exit");
     System.out.println("-----new date-----");
     } catch (tcAPIException e) {
     logger.error("Error in finding end date for user" + e);
     } catch (tcColumnNotFoundException e) {
     logger.error("Error in finding end date for user" + e);
In th log file, I can see that the code is not executing this line:
cal.setTime(endDate);
end date is of type Date and stores users end date from DB. Please help in resolving this issue.
Thakns,
Kalpana.

Mail from RVADOR01 need to add body of the mail

Hi Experts,
How to add mail body for the below case?please look
I am using output tupe Zmail attached to Program ZRVADOR01 and script form ZRVORDER01.
The Program ZRVADOR01 and the script ZRVORDER01are copied from standard prog RVADOR01 and standard script RVORDER01.
And this output type is attached to VA02.
In the Zprogram i could able to give mail subject in OPEN_FORM function module in OPTIONS parameter.
And i am sending to the exterid which is outlook.
For giving the email id i have added some code from the note .357137 before calling the OPEN_FORM function module in the program..
mail is coming with subject line and attachment of script document .
But the only thing needed is , add body text for the mail.
How can i do this?
Regards
Ramakrishna

Hi Rama, I am trying to do the same and noticed that your comments/question appears as "ANSWERED" at the top of the thread.
Were you able to accomplish this?
Jacob

I need to add a program to my laptop, but I have forgotten my password. How can I reset it?

need to add a program to my laptop, but I have forgotten my password. How can I reset it?

Solution may be found if you search in the "More Like This" section over in the right column.

Multiple Certs on gateway? (need to add an intermediate CA).

Similar Messages

Maybe you are looking for