Multiple channels appear on Windows 7?

SOUND BLASTER X-Fi PLATINUM FATALTY CHAMPION SERIES here. I've installed Windows 7, then installed the Drivers from the genuine CD, then updated through CREATIVE SOFTWARE AUTOUPDATE. After that, I launched the console and everything works perfectly except for one thing:
On the recording selection panel (the menu at the console, where you select if you want to record "What you hear" or "Wave", or "Microphone",...) I don't have the same that I always used to have on Windows XP, in other words: now lot of "Microphone" channels appear, but I don't have "Wave" anymore. I do have "What you hear".. but there's a mess with lot of "Microphone" channels instead of the old "Wave" and "Microphone 2" channels I used to have.
Some of those are "Microphone (Creative X-Fi)" and others are "Microphone (USB Device)" or "Microphone (High Definition Device)" but I do not have an USB soundcard at all. In fact, I do have exactly the same hardware config. that I had on my times with Windows XP (where everything was working perfectly).
I've uploaded a picture of that panel as an example: http://img75.imageshack.us/img75/928/examplen.png

Hello mccartjt,
If my understanding is right, you can use the account to get the right profile, and the other use the VPN to connect to the Windows 7 and can’t get the right profile.
Does this issue only occur on this account when use VPN connection?
Please check if only the outlook configuration is changed or all profile is changed.
Please open the event viewer and check if there are any related error log. For more information about the event log, please refer to the following article.
http://windows.microsoft.com/en-us/windows/open-event-viewer#1TC=windows-7
Additionally, we could run the command logman -start profiletrace -p {eb7428f5-ab1f-4322-a4cc-1f1a9b2c5e98} 255 3 –ets to start log.
And the command logman -stop profiletrace –ets to stop the log.
The .etl log file will exists in the %WINDIR%\System32 folder. Please upload it to OneDrive and share it with us.
Upload files:
http://windows.microsoft.com/en-us/onedrive/add-photos-files
Share files:   
http://windows.microsoft.com/en-us/onedrive/share-file-folder
For more information, please refer to the following article. This article is about Windows vista, and Windows 7 is similar.
http://blogs.msdn.com/b/spatdsg/archive/2007/02/07/userenv-vista.aspx
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Similar Messages

  • What is the recommended way to do multiple channel, single point sampling for control with an NI PCI-6255 in RLP?

    Hello,
    I am writing a driver for the M-series NI PCI-6255 for QNX. I have downloaded the MHDDK and have all the examples working. I have also enhanced the examples to do interrupt handling (e.g. on AI_FIFO interrupt or DMA Ring Buffer interrupt). My ultimate goal is to write a driver that I can use for closed-loop control at 500 Hz using all 80 channels of the NI PCI-6255. I may also need to synchronize each scan with a NI PCIe-7841R card for which I've already written a driver. I want an interrupt-driven solution (be it programmed I/O on an interrupt or DMA that generates an interrupt) so that the CPU is available to other threads while the 80 analog inputs are being read (since it takes quite a while). I also want to minimize the number of interrupts. Basically, I will need to collect one sample from all 80 channels every 2 milliseconds.
    There are many different options available to do so, but what is the recommended technique for the NI PCI-6255 card? I tried using the AI FIFO interrupt without DMA, but it seems to interrupt as soon as any data is in the AI FIFO (i.e. not empty condition), rather than when all 80 channels are in the FIFO, so more interrupts are generated than necessary. I tried using DMA in Ring Buffer mode to collect a single sample of 80 channels and interrupting on the DMA Ring Buffer interrupt, which appears to work better except that this technique runs into problems if I cannot copy all the data out of the DMA buffer before the next AI scan begins (because the DMA will start overwriting the buffer as it is in ring buffer mode). If the DMA is not in ring buffer mode or I make the ring buffer larger than one 80-channel sample then I don't have a way to generate an interrupt when one sample has been acquired (which I need, because I'm doing control).
    I saw something in the documentation about a DMA Continue mode in which it looks like you can switch between two different buffers (by programming the Base Count/Address with a different address than the current address) automatically and thereby double-buffer the DMA but there is no real documentation or examples on this capability. However, I think it would work better than the Ring Buffer because I could interrupt on the DMA CONT flag presumably and be copying data out of one buffer while it is filling the other buffer.
    Another option would be DMA chaining, but again, I cannot find any information on these features specific to the NI DAQs.
    I tried interrupting on AI STOP figuring that I could get a single interrupt for each scan, but that doesn't appear to work as expected.
    I know that DAQmx on Windows has the ability to do such single sample, multiple channel tasks at a fixed rate so the hardware must support it.
    Any suggestions would be appreciated.
    Thanks.
    Daniel Madill

    Hello,
    The interrupt that will happen nearest the times that you need is the AI_Start_Interrupt in the Interrupt_A group. This interrupt will occur with each sample clock. By the second time this interrupt fires, the AI FIFO should have the samples from the first conversion. If it is easier to use programmed IO, you can read the samples out of the FIFO until you get all 80.
    Additionally, you can set the DMA to send samples as soon as the FIFO is no longer empty...instead of waiting for half full or full. This change will reduce latency for your control loop. You can set AI_FIFO_Mode in AI_Mode_3_Register to 0. By the second time this interrupt fires, you should be able to check how much data is in the DMA ring buffer and read the 80 samples when they are available. You can make the ring buffer larger than 80 samples if you see data getting overwritten.
    There is no interrupt associated with 80 samples being available in the FIFO or 80 samples being available/transferred by DMA to the host. X Series has much more flexibility with these interrupts.
    I hope this helps!
    Steven T.

  • How do I read multiple channels at one time using labview with the Fluke Hydra Data Bucket 2620a using serial port?

    I need to take a reading of 15 channels about once a second. I can read one value at a time using the monitor function on the read values.vi driver, but this takes forever to read all the channels.

    I don't have this instrument but I took a look at the instrument driver and it appears that you can only configure one channel at a time to read from. You might want to take a look at the command set for this instrument and see if it allows for configuration of multiple channels. It could be that the instrument driver just doesn't have that built in.
    J.R. Allen

  • Savin' and recalling multiple channel Strips ?

    is there a way to save and recall multiple channel strips ? what i'm trying to do is for example : to set up
    Ultrabeat Multi which would include several Aux's and busses with indivitual bus effect etc and recall it in a New song exactly as i saved it . how do i goabout it
    thx B
    Mac Pro 2.66   Mac OS X (10.4.8)   Yamaha MLan i88x Audio Interface

    Two ways you could do it.
    1: set the existing setup as a template; remember to get rid of all regions in Arrange & all audio in the Audio window. Whenever you want a new song with these settings, create it using this template.
    2: at the top of each channel strip just below the EQ window is a small triangle. Click on that and select 'Save Setting As . . ' and give it a memorable name.
    Do that for each channel strip you wish to save. In your new song, select the strip setting you want and everything in that channel will be opened; all FX, Ultrabeat or any other Logic synth you may have had inserted.
    I hope one of these helps you.
    guitarguru

  • Displaying real-time data using gui meter from multiple channels.

    I am using DAQ USB-6009 for my assignment. Part of my task is to display real-data from multiple channels in the form of gui meters.  eg. irradiance and voltage...
    I used a split signal to separate the signals from different channels coming out of the data output terminal of the DAQ assistant. The problem is that I do not know which vi to connect in between the split signal and the gui meter. I am looking for one vi that is capable of handling signals (measurement)  and outputting the data to the gui meters simultaneously and individually based on the channel they are coming from.

    Thnx for your tip, Dennis.
    However, I have another problem that just occurred to me when my VI manages to execute as I wanted.
    I noticed that the needle on my gui meter will only "appears" to be responding to every changes to its input when I have set it to run continuously and the only way to stop it is via abortion which might leave the resources (eg. external hardware) in unknown state. Is there any safer and workable ways to organise the VIs using while loop?
    I have placed my DAQ assistant, write to measurement file (vi), add function, split signal and gui meters all in 1 single while loop.
        DAQ-------> write to measurement file
                 |
                 |                                                 ​                   |--------------------------------> add function----> gui meters
                 ---------------------------------------------> split signals ---|--------------------------------> add function----> gui meters
                                                      ​                                |--------------------------------> add function----> gui meters
    If I do the following steps,
    1. press run continuously to start the VI
    2. click the same button to disable continuous run when the VI has completed its task.
    3. click the stop button in the front panel to stop the while loop
    Does doing these steps ensure that I will not leave resources in unknown state? Is it a safer way to stop a VI which is running continuously?
    Pardon me for I am new to LabView. Even though, I have read the user's
    manual and tried out all the execises, there are some concepts that I
    need clarification on and mistakes that I need to discover through more hands-on.

  • GragaeBand not recognizing multiple channels on USB mixer

    I have the Tascam US-1800, it is a 16 channel USB mixer.  I used it to record muliple tracks at once.  But lately when I plug the mixer into the computer, it only appears as one channel.  If any body else is experiencing simular problems, plese leave a comment!

    Simple - use a single task with multiple channels. Surely the answers in all of the related posts said that. The channel list is just dev1/ai0:1.

  • ERROR MESSAGE: Automation, Multiple Channels?

    7.1.1
    Sometimes when I'm refining already existing volume automation with the mouse+on screen fader, the fader gets b!tchy about being moved and all kinds of jagged automation curves results from otherwise smooth movements of the mouse. If I click on some of the nodes to straighten them out, a dialog box appears saying something about "multiple channels found, do you want to convert them".
    Anyone else run across this message? Wondering why it's happening too...
    -=iS=-

    "Events of the same type with multiple MIDI channels found!"
    Anybody know how to disable this message or overide it?
    This most usually happens when I copy a MIDI region (including automation) to another MIDI track and then adjust the automation in the new track.
    I assume this is not an error message because it's not indicating a mistake. Logic is just asking how to proceed (and there's no 'Cancel'option). Logic probably recognizes the identical nature of the two regions and asks if I want the same changes to be mirrored in both regions (which is handy), but more often than not I don't. Clicking 'Keep the Same'
    How do I get Logic to not display this message? Is there any Global MIDI editing preferences?

  • Suddenly I can open only one Firefox window at a time. I can have multiple tabs in that window, but I can suddenly no longer open another window. What happened?

    Suddenly I can open only one Firefox window at a time. I can have multiple tabs in that window, but I can suddenly no longer open another window. What happened?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Ability to view multiple files in ONE window

    I can see here that this is not a new topic really but the thing with Acrobat 9 is so frustrating that it is just unbelievable.
    This is another pearl:
    Acrobat 9 "lost" its predecessors ability to view multiple files in ONE window. After opening four only documents I cannot see anything on the screen because the toolbars on each individual window cover all necessary view and nothing is left for the actual document. And sometimes I need to open 20 documents!
    This is ABSOLUTE DISASTER!!!
    I found some explanations from Adobe on the Web that are more than a year old.
    I was sure that by now this unfortunate mishandling of that feature (apparently it was dropped out from A9 deliberately - WHO'S IDEA WAS THAT?) would be somehow restorable.
    Would anyone happen to know if this feature can get restored to how it was working in A7 or 8 (without the need to uninstall A9 and install A8)?

    No, it can't be restored, unless Adobe decides to change the way Acrobat works (which is possible, but not likely).
    By the way, it was Microsoft's idea... Adobe were just following their example on this.
    You can make a feature request here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • Data acquisition from multiple channels.

    Hello
    Right now, I am able to acquire the signal from a single load cell and display it.But I would like to know of how to acquire  acquire signals from two load cells simultaneously.I am using Labview 6i and I am using AI S-Scan with AI config to acquire the waveform.It would be of great help if you could suggest a simple method to acquire the signals.
    PS: Please find the attached file used for acquisition from a single load cell.
    Looking forward for your reply.
    Manasa
    Attachments:
    test 4.vi ‏102 KB

    Hi Manasa,
    If I understand what you are trying to do, it is relatively
    straightforward to configure your application to acquire data on two channels.
    I was unable to run your vi as it was missing some of the subVI’s
    from your application.  However, your
    attachment was sufficient to see what you are trying to do. 
    Here is how to add channels:
    1.      
    In the I/O Channel Constant, you can add
    additional channels by using a comma or a semi-colon.  For example, to scan the first four channels
    you would put 0:3 in the constant (see attached screenshot ChannelConfig.jpg).  To scan the first and third channel you would
    put 0,2.
    2.      
    The AI Single Scan VI will now read from
    multiple channels.  Often it easiest to
    configure the output of this VI for viewing by first putting the data into an
    array using the Build Array VI.  It can
    then be plotted in a waveform graph. (see attached screenshot ReadtoGraph.jpg
    and WaveFormGraph.jpg)
    Just a few notes about “simultaneous” sampling:
    Most of the NI data acquisition cards have a multiplexer
    between the various input channels and the Analog to Digital (A/D) converter
    creating a very small delay between each channel (usually ms range or
    smaller).  NI does make several data acquisition
    cards that can perform true simultaneous sampling, meaning that there is an A/D
    converter for each channel.
    For the large majority of applications, the small delay
    between channels is negligible.
    Jared T.
    Attachments:
    ReadtoGraph.JPG ‏21 KB
    ChannelConfig.JPG ‏288 KB
    WaveFromChart.JPG ‏61 KB

  • I see a small window displaying "Are you sure you want to shut down your computer now". How do I stop appearing this window

    I see a small window displaying "Are you sure you want to shut down your computer now". How do I stop appearing this window

    Is this after you've chosen to Shutdown from the Menu, or just on it's own?
    You can press the esc key to cancel, or Enter key to shutdown.
    Check your System Preferences>Energy Saver>Schedule & see if it's set to shutdown at a certain time.

  • How to Read from multiple channels

    Dear Sir
    I am acquiring data using FP-RTD-122 using OPC Client software. I ahve made one socket for that and i am using command
    CWDataSocket1.AccessMode = cwdsReadAutoUpdate
    CWDataSocket1.URL = "opc://localhost/National Instruments.OPCFieldPoint/FP Res\FP-RTD-122 @1\Channel 0"
    CWDataSocket1.Connect
    v = CWDataSocket1.Data.Value
    where v is a variant type.But this is 8-channel RTD so how can i read values from all channels using single socket connection Because at presnt i have to use 8 sockets for all eight channels.

    At least as of FieldPoint 4.0 and earlier (I do not know about 4.0.1 or later), the OPC Server did not support multiple channel analog items. Thus to read all eight channels of a FP-RTD-122 module, you would need 8 separate socket connections. For discrete modules (boolean), the "All" tag, is treated as a single 8 or 16 bit number.
    Regards,
    Aaron

  • How  to use multiple channels with one remoteObject .

    hi,
    I have an application which is accessed through HPPS some
    times , also it can be access on server with http service.
    so I want to know how to configure config files or add
    runtime channels which will support either channel depending on
    the server it is accessed over.
    Is there any one who can help me to solve this...i need it
    soon.
    thank you...

    Hi,
    Please visit the URL below for details on adding channel sets
    at runtime. Add multiple channels to the channel set so that the
    fall back mechanism works.
    http://livedocs.adobe.com/blazeds/1/blazeds_devguide/runtimeconfig_5.html#194376
    Hope this helps.

  • How do I view multiple images in one window?

    How do I view multiple images in one window?  I want to compare images side by side, not in tabs.

    Thank you, Barbara.  I found that I had to close the program after I turned on "allow floating documents" and restart, before I was able to go to "float all in windows". 

  • Ipod 160g does not appear on itunes but it appears on windows when in disk mode

    my ipod 160 g does not appear in itune (disk mode or not) but it appears in windows as IPOD (F:) only when it's in disk mode. I tried reseting it by holding the menu and center button it stop but then it goes back to the apple logo screen and stay on untill the battery dies and nothing else happens how can I reset it to is factory settings?

    When you connect it in Disk Mode, leave it charging the iPod Battery till Full Charge.
    In the meantime, 30 minutes or so into the charging, ( I just want the Ipod to have sufficient power for any harddisk Operation)
    go to Window Explorer (or My Computer),
    Select the Ipod, right click properties, ->tools->error checking->Check Now->fix error
    After the error fixing (may take a while but then you still have to wait till the battery charging is complete.)
    Disconnect the iPod from the PC.
    Antivirus has a tendency to freeze Itunes sync Operation with Ipod Classic, causing a timeout, which corrupt your Ipod filesystem, so when iTunes cant read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
    My suggestion.
    Connect your Ipod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete. - Done above
    Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
    Stop the Antivirus program
    Connect your Ipod to the PC
    When Itunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
    When Restore complete, eject the iPod and reconnect again.
    Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well, since you got such a huge library.
    When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
    Good Luck! and have a Nice Day!

Maybe you are looking for