Multiple classification In Class Type 023(Batch Class)
Dear All,
I like to do a multiple classification in Class Type 023(Batch Class) but in Configuration System not allowed to do any change in MCHA Object for multiple Classification
So pls give me a suggestion.
Regards,
Murari Shah
see OSS Note 115581 - No multiple classification for batches
Similar Messages
-
Hi
I have few milion of entries in class type 023 - batch in AUSP table?
In MCH1 I can see only few thousands entries for batches linked with material.
But for those I can not find any relavant entries in AUSP.
We are using very limited functionality of batch management. No classification is maintained for batches.
What are the other objects (than material) that uses batches?
I need to answer the question if entries in AUSP can be deleted or archived?
Thanks for hints
Mariuszthis means you have values for characteristics that are not anymore in your system.
Please have a look into OSS Note 501463 - Deletion of table AUSP not complete
and Note 127635 - ZCLINOB2: Comparison tables INOB/AUSP against KSSK.
maybe they are helpful for your
Do you exchange batches with a APO system?
I have seen many OSS note while searching OSS with keyworkds "AUSP inconsistent"
MAybe there are more helpful reports for you to check and correct such data.
If you are unsure, then you should open a message to SAP -
About Batch classification(Of class type 023) in new batch
hi:
I had assigned a batch class 'ZBC'(Of class type 023) to material 'A'. So, when I use t-code "msc1n" to creat a new batch for the materia A, I find the system does not check the 'classification' view ,and after maintaing 'Basic Data1' view , I can directly save new batch even if the values of batch character is empty.I had specified the batch characer must be entry value in the batch class 'ZBC'(Of class type 023).
I want to system check it ,and give me a message for it ,and couldn't save the batc if the values of batch character is empty.
So ,I wonder how to control it?
Edited by: kaien wang on Jun 10, 2009 5:40 AMDear Amitabha,
Thans for you attention.
In my characteristics definition, I didn't use any reference table field . the values of 'addnl data' view in the characteristic is keeping blank.
best regards,
yours kaien -
How to change material classification for class type 023
Hi Expert,
I want to change class ZSK_EXPIRY_DATE to ZSKK_GR_DATE under class type 023 in classfication tab (MM02). Understand that the same class also assigned to material and batch in MSC3N. So i'm sure it's not as easy asdo the direct change in CL20N. Can i anyone please guide me step by step to change it? What is the pre-requisite and the impact of the change that i have to care of..
Thanks/Regards,Hi Crystal,
You consume all the materials created with the earlier batch classification and then try to change it. or keep the assinged class and then create your new required class and then assign the new class to the material in classification view and start using the new one.
Chris -
Batch Classification by class type 022
Hi all,
We are using batch management at material level and present class type 023. We are looking at changing the class type to 022 as we need some information to be retained at plant level.
While creating class for class type 022 the system gives an error " Internal class type 022 cannot be used in class maintenance
Message no. CL089"
Can somebody let me know the reason and solution for this error? Is it due to the fact that we have set the batch at material level?
Also, it would b great if someone can share his/her experience in changing batch clases, even class conversion.
Best Regards,
VSHi VS,
I think that you should change the customizing first. Class types 022 and 023 can not be created simultaneously. It is either 022 or 023.
Be careful : I did it long time ago but there is one way you can do (023 to 022 or 022 to 023 I don't remember) but you cannot reverse it.
Rgds,
Philippe -
Internal class type 023 cannot be used in class maintenance
Dear PP gurus,
I am creating class from t code CL01 and while entering class type 023 , i am getting a error message
"Internal class type 023 cannot be used in class maintenance" . when i pressed F4 , in the list 023 is not present.
In the develpopment client , when i do the same 023 , it allows be to create class
pls help me wher i am missing or?
RegardsHello All,
I am facing a similar problem.
I have checked the following customization "SPRO --> Cross Application component -->Classification system --> Class --> Maintain Object type and class,
Here select the MARA table click on the object and check class type 023 is assigned or not."
Class type 023 is not assigned there. When i try to add a new entry I get the following error message
"Specify the key within the work area".
I referred to the following note :OSS Note 1066606, but that is concerned with AFS component.
Kindly provide me a solution as soon as possible.
Regards,
Julia -
Classification or class to batch in confirmation order
hi
how to assign classification or class to batch in confirmation order if its not getting automatically
thanking youHello,
Characteristics are assigned to classes,Classes are in turn assigned to material master classification type.
Assigning batches to Production order is done by the below link:
http://help.sap.com/saphelp_sbo88/helpdata/en/6b/509e741cdd4b36857ac330fb85327d/frameset.htm
Then once you have production order you can confirm the same.
Hope the information was useful
Regards,
Swetha -
How to transfer classification data (class type 001) in ecc to crm
Hi. dear
I have a problem in transfering classification data (class type 001). we use classification data in material (mm01) in ecc, class type is 001, but now I have to transfer the classification data to crm.
i had downloaded the CLASS,ATTRIBUTE and OBJCL,MATERIAL,but i don't see classification data in crm.
please let me konw :
(1) how can i transfer classification data (class type 001) to crm.
(2)how can i see these data in crm
thanks
zongfirst, very thanks , i had seen the note 428989, but, i wonder if there are other method to resovle the problem.
In ecc, the classification data have many charicter ,but ,in crm, how can i display the classification data . in product data,of crm, i cannot see any tab to display the data. what can i do in crm to display the classification data. -
Master recipe- classification- change class type
Hi Gurus, trying to change the class type in c202, recipe header tab, classification tab, class type to 019. but 018 looks gradeout can not be changed. could you please advise how can we change this setting to 018? thank you.
Hi,
its a Config setting go to t code O1CL select the table PLKO & select the Object dialogue structure.
Its a standard setting be clear with your scenario u r looking fwd..
Manu -
Error: Multiple classification not allowed in BAPI_GOODSMVT_CREATE
Hi Experts,
I have a Z-program where I am using BAPI_GOODSMVT_CREATE to create GR, while executing the BAPI getting error as "Multiple classification not allowed".
This issue is coming after version Upgrade from 4.6C to ECC6. I even Implemented the SAP note: 1988378. I am also getting the error for the Classtype 023. So I tried Implementing this note.
But the issue remains the same.
Kindly suggest,
Regards
GopaAlso Checked in SPRO-> Cross Application-> Classification System-> Classes-> Maintain Object Types & Class Types.
When we select MCHA from the Tables on the right side and then Click on Class Types folder on the Left hand side, we can view the Class Type : 023 assigned to Batch on our right side. There we hav some checkboxes below it. One of the check-box states "Multiple Classification", that checkbox is not selected.
When we check the same in the Older Version 4.6, there also the check-box states "Multiple Classification", that check-box is not selected.
Regards
Gopa -
Strategy Types in Batch Search Strategy (Process Order)
Hi Expert,
What are the difference between the strategy types - Order type/Plant/Mat, Order type/Plant, Prod Material?
For Order type/Plant combination- If my criteria is to do automatic batch determination at process order release against the sort rule characteristics (LOBM_LWERT) GR received date. I maintained LOBM_LWERT in all material classes, now in selection criteria which class I will choose as different materials contain different class in the class type 023.
I am confused.
In case of Order type/Plant/mat- number of master data is huge.
Pls suggest
KrishGot answer.closed
-
Multiple classification not allowed
Hi
I would like to maintain same site to multiple site (store) hierarchy. However, error message appeared when I would like to assign site to class via tcode WB86. From the diagnosis, it says that we can define class types and their features in the IMG for Classification. There was an error 'Transaction CL2B (RCCLTYP0) is obsolete' when I click on tcode CL2B to maintain the class type. Can experts share with me where is the correct configuration path to allow for multiple classification.
Regards
Kang RingThe problem is solved.
-
EIM/WIM multiple classifications problem - alarm node
Hello,
I need some piece of advice with alarm workflow. I would like to select multiple classifications with one alarm node, but boolean "OR" statement is not working properly.
For example: I have category A and category B. I would like to specify Filter-Activity condition based on Relationships. I select :
<object type>-<attribute>-<operator>-<value>-<boolean>
Classification-Classification name-=-A-"OR"
Classification-Classification name-=-B-"AND"
But after "OK" button is pressed and I reopen the alarm node, but the "OR" statement is changed to "AND", so I am unable to filter based on multiple classifications.
Classifications does not contain the same string, so I cannot use for example another operator to reach the selection.
Any advice how to do this? (copying of alarm workflows is such a strange idea:)seems to be a defect, you should be able to evalute condition 1 and condition 2 = result 1
result 1 or condition 3, result 1 and condition 3 etc...
in your case if you have,
classification classification name contains test OR
classification classification name contains test2 OR ----- Result 1
classification classification name contains test3 OR------ Result 2
classification classification name contains test4 AND-----Result 3
and this is not saving then it is a bug and should be filed as such. -
Can We have multiple SLEDs maintained in a single Batch
Hi all
Can we have multiple SLEDs maintained within a single batch. This SLED would be maintained at Quant level. One batch will have multiple quants and would be maintained in separate bins. However in LX27 i should see both the SLED for the same batch.
Please Help
Thanks & Regards
JajatiMy sources tell me that batch management is not a part of Retail but of logistics and unfortunately I am not able to move your post to a better thread. However, I suggest you please do a search of all forums using "batch management" as your search criteria.You'll see loads of hits. You might find your answer there or a better place to post your question.
-
Valuation type with batch management.
Dear all:
We have created our self valuation category D, without automatic valuation type.
From what we have checked, it is mandatory to enter a valuation type during batch creation with MSC1N. This link between batch master and valuation type is impossible to change.
Our plan was to employ 2 valuation types, independently of the batch used, so that with a STO we could be able to post and outbound movement from valuation type A and a subsequent inbound goods receipt of valuation type B.
That's a problem for us as we use batch numbers to refer to certain material features, and those shouldn't change given the valuation type, so that it is mandatory for us to use the same batch number for both valuation types. Given that the link between batch master and valuation type is unbreakable, this looks not possible.
We already tried to de-activate the valuation type as a required field during the batch creation, but it didn't work as the field still needed an entry during the saving. There are also several error messages that would need to be de-activated (M7043, 06649...)
If we cannot use two valuation types with the same batch, is there any solution we can manage, besides of the duplication of batch numbers?
Any help will be greatly appreciated.
Thanks in advance.Hi, Jürgen, thanks for your comments.
We have as well the batch management at plant level, but our idea was to use split valuation in order to avoid the use of plant as the minimum valuation level, as this would have further issues regarding the logistic side (we can use the stock determination group to solve this when using split valuation).
So we face the problem that with a given batch number we cannot post movements with two different valuation types.
I'll take a look at the note anyway, thanks for your help.
Maybe you are looking for
-
ASA 5505 Trunking problem with cisco 3760
Here is my asa 5505 configuration and at bottom i am pasting cisco 3760 configuration, I am having trunking problem and seen other people having the same issue but no solution. Problem: when i connect any device on Switch 3760 port 1 which is trunke
-
Tool bar dock problem with grid layout
I have a tool bar with grid layout. When i dock it to vertical location(west or east) the buttons inside tool bar keep one row. I want to know how do i do to make the buttons arraged vertically like the tool bar with default layout when dock it at we
-
How to bring ISQLPLUS interface on the browser ...
how to bring ISQLPLUS interface on the browser ...plz give me the full path ,.. my machine name is " mallick786 "
-
InDesign CS 5 vs Illustrator CS 5 large format output help needed
Ok here's the deal, I work in a small agency in Dubai, we have many nationalities and over here so, so many people use Illustrator for everything, and it drives me up the wall. Anyway we had 40 2x3 metre boards to be designed and the lcient asked fo
-
Does anyone know if this can be fixed? I am a Quebec resident with Telus as my provider.