Multiple clean installation failures-HELP!

Keep getting error message "there were errors installing software. Please try again" in the middle of clean installation.
Have disconnected all peripherals and used disk utility and Norton to check disk. Disk OK. Recently added 256K RAM to facilitate installation. Have no way of checking whether this RAM is the problem (ie, on another MAC) unless there is another way.
Is there anything else I should try to facilitate installation? Thank you!!

It is possible the hard disk you are installing to is damaged, or that the installer disks you are installing from are damaged. Try replacing the hard drive first, and then if that doesn't work, get replacement installation disks.
Note, you can only install newer retail installation disks, or the original disks which came with that Mac. You can't use the installation disks which came with another Mac. Norton's repairs should not be attempted on any system 8.1 or higher. It is like playing Russian Roulette with your data. Some have no trouble with it, but others have significant issues which happen. Only using the proper version of Disk Utility, Alsoft Disk Warrior (3.0.3 for Mac OS X 10.4), or Techtool Pro (4.0.5 or later for Mac OS X 10.4) will repair the directory of those systems. Your best thing to do before installing or repairing anything is back up your data:
http://www.macmaps.com/backup.html
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

Similar Messages

  • Mavericks freezing even after clean installation. Help me, please!

    Hi,
    I'm having some issues with my Mavericks in my MacBook Pro Late 2011 (below you'll find my system information from EtreCheck).
    I've tried update my Mountain Lion to Mavericks (10.9). The installation went well, but after that the OS has freezed several times, mainly when I was using iPhoto and Firefox (or Safari) together. My iPhoto library has more than 200 GB. I needed to forcely restart the machine every time the freezing ocurred. Important: the freezing was not completely; I could do things like show the desktop (I use one hot corner for that), but couldn't open or close programs.
    I've got very frustrated and thought about downgrading to ML.
    But I tried to do a clean installtation of Mavericks (10.9.1). I did that, but problems continued (different, but continued).
    First, I've got a strange message saying that I run out of memory application (same as this one: http://www.michaelkummer.com/wp-content/uploads/2013/10/2013-10-27-at-2.25-PM-2x .png). This problem didn't happen anymore (maybe because I've deleted all my Internet accounts, as suggested by someone here, because I've received some Keychain's messages asking me to change my passwords).
    The freezing problem continues now, but a little differently. Sometimes, when I open my MB Pro display, the screen gets blank and didn't appear nothing in it, and I need to forcely restart it frequently.
    Well, that's it. I'm seriously considering to do the downgrade, but decided to try getting help here with you, all the experts and good people.
    Thank you in advance!
    Hardware Information:
              MacBook Pro (13-inch, Late 2011)
              MacBook Pro - model: MacBookPro8,1
              1 2.4 GHz Intel Core i5 CPU: 2 cores
              8 GB RAM
    Video Information:
              Intel HD Graphics 3000 - VRAM: 512 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 0:29:12
    Disk Information:
              SAMSUNG HN-M101MBB disk0 : (1 TB)
                        EFI (disk0s1) <not mounted>: 209,7 MB
                        OS X (disk0s2) /: 999,35 GB (382,8 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              OPTIARC DVD RW AD-5970H 
    USB Information:
              Apple Computer, Inc. IR Receiver
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
    Launch Agents:
    User Launch Agents:
              [not loaded] com.google.keystone.agent.plist 3rd-Party support link
    User Login Items:
              iTunesHelper
    Internet Plug-ins:
              FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
              Flash Player: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              Default Browser: Version: 537 - SDK 10.9
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    3rd Party Preference Panes:
              Flash Player  3rd-Party support link
    Bad Fonts:
              None
    Old Applications:
              None
    Time Machine:
              Mobile backups: OFF
              Auto backup: NO - Auto backup turned off
              Volumes being backed up:
                        OS X: Disk size: 930.71 GB Disk used: 574.20 GB
              Destinations:
                        TeraMacBKP [Local] (Last used)
                        Total size: 0 B
                        Total number of backups: 6
                        Oldest backup: 2013-09-15 16:04:38 +0000
                        Last backup: 2014-01-20 03:36:50 +0000
                        Size of backup disk: Too small
                                  Backup size 0 B < (Disk used 574.20 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   4%          WindowServer
                   2%          hidd
                   2%          EtreCheck
                   0%          coreservicesd
                   0%          mds
    Top Processes by Memory:
              123 MB          mds_stores
              123 MB          com.apple.WebKit.WebContent
              115 MB          Safari
              115 MB          com.apple.IconServicesAgent
              49 MB          WindowServer
    Virtual Memory Information:
              5.07 GB          Free RAM
              1.47 GB          Active RAM
              114 MB          Inactive RAM
              1.35 GB          Wired RAM
              337 MB          Page-ins
              0 B          Page-outs

    have you tried resseting it by holding the sleep/wake button and the home button for 15 seconds? if that doesn't work try doing a DFU mode(http://www.iclarified.com/entry/index.php?enid=1034) restore and see if that fixes it.

  • Freezing after HD installation - failure - HELP.

    Hi,
    Major major problems after attempting a HD upgrade. Initially the system was freezing when a Seagate Barracuda 400GB drive was installed as primary boot drive with 10.4. installed. Jumpers were set to master - with drives 2, 3, 4 running off a SATA controller. After 2/3 minutes - system would freeze and required force quit. So removed drive - re-installed 80GB drive and the same is happening. Help.
    The boot drive has Tiger - my question is - could the failed installation upset the CPU - and if so - should I re-set it? I've even tried re-booting of a secondary drive running 10.3.9 - and the same thing happens - total freeze.
    All suggestions for cure would be appreciated.
    BB

    Hi Majordadausma,
    Haven't tried changing the jumper to cable select yet - thanks for the advice. I've actually ordered a Dual core G5 - because IMO - the G4 just can't handle my power apps + Tiger. Re-setting the pmu stabilised the system to work with - and when i have the new G5 - i'll get back inside the G4 and try your tip. Too scared to attempt any more meddling just now.
    Finally - I did note the Seagate Barracuda 7200.8 - ST3400832A firmware was 3.03! Could this be significant as the other HD in the G4 has firmware 3.06?
    Regards,
    BB

  • Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

    Hello,
    I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
    I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
    Failed to install the new preview build, please try again later. 0x80246007
    What could be the problem?
    Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
    for this VM. Now that I have this 80246007 error code.
    When looking up System log, the following error messages are listed multiple times:
    Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
    The errors are returned for the Event ID 20 by WindowsUpdateClient
    in task category Windows Update Agent..
    I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
    registry key as suggested in Windows
    Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
    "BranchName"="fbl_awesome1501"
    "ThresholdRiskLevel"="low"
    "ThresholdOptedin"=dword:00000001
    Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
    However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.  
    Looks like Setup is having problems installing in a Hyper-V virtual machine.
    Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
    Any clue why installing under VM causes 9926 to fail?
    Thank you in advance.
    Well this is the world we live in And these are the hands we're given...

    Hi,
    According to the error message, this problem seems like update package installation failed during system upgrade.
    You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
    On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
    Roger Lu
    TechNet Community Support

  • Adobe Player for Embedding installation failure

    Multiple tries but only failure - have tried both the automatic update and also the standalone installer. Zero sucess. Since I have CS5 Master Collection hate to wate the better part of the day doing a clean re-install. Here is my most recent update log file.
    Any suggestions on what I should try are welcome!
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    Visit http://www.adobe.com/go/loganalyzer/ for more information
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    START - Installer Session
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    RIBS version: 3.0.122.0
    Win OS version: 6.1.0.0 64 bit Type: 1
    ::START TIMER:: [Total Timer]
    CHECK: Single instance running
    CHECK : Credentials
    Load Deployment File
    deploymentFile option not given
    Create Required Folders
    Assuming install mode
    Looking up install source path
    Sync Media DB ...
    ::START TIMER:: [Sync Media DB]
    Pre check media db sync
    End of Pre check media db sync. Exit code: 0
    :: END TIMER :: [Sync Media DB] took 185.497 miliseconds (0.185497 seconds) DTR = 21.5637 KBPS (0.0210583 MBPS)
    Ready to initialize session to start with ...
    ::START TIMER:: [CreatePayloadSession]
    -------------------- BEGIN - Updating Media Sources - BEGIN --------------------
    Updated source path: C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup
    Updating media info for: {F9997A85-B21A-48E4-9C8A-7E1352AB1C62}
    Ignoring original data since install source is local
      Type: 0, Volume Order: 1, Media Name:
      Path: C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
    --------------------  END  - Updating Media Sources -  END  --------------------
    Supported RIBS version range: [0.0.66.0,3.0.122.0]
    ----------------- CreatePayloadSession: machine is x64 ---------------
    [    4956] Sun Nov 14 07:48:25 2010  INFO
    ______ Verify Dependency Subscribers ______
    Overwrite property "extensionsOnly" to: 1
    Overwrite property "mode" to: silent
    Overwrite property "patchesOnly" to: 1
    Overwrite property "workflow" to: updater
    Found payload actions:
    Deciding what installer mode to use...
    BEGIN Setting requested payload actions
    Value returned on lookup of payload: {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul is: false
    Action string for  {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul  is install
    END Setting requested payload actions
    Collected advanced path check information for INSTALLDIR
    INSTALLDIR is a well-formed path
    INSTALLDIR is not the root path
    INSTALLDIR is on a local volume
    INSTALLDIR is on a writable volume
    INSTALLDIR is not on a case sensitive volume
    INSTALLDIR passed path basic path validation: C:\Program Files\Common Files\Adobe\APE\3.1
    [    4956] Sun Nov 14 07:48:26 2010  INFO
    Payloads passed preflight validation.
    Call PreSession Custom Hook
    Calling the custom action code for pre-install for payload {F9997A85-B21A-48E4-9C8A-7E1352AB1C62}
    ::START TIMER:: [Payload Operation :{F9997A85-B21A-48E4-9C8A-7E1352AB1C62}]
    [    5276] Sun Nov 14 07:48:26 2010  INFO
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    Installer Operation: PayloadInstaller
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    Request to install payload
    Extracting assets...
    Extracting assets complete. Number assets: 1
    CustomizedPatch property not found in database
    Beginning installation for payload at C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
    [    5276] Sun Nov 14 07:48:26 2010 ERROR
    6 Command ARKPatchCommand failed.
    [    5276] Sun Nov 14 07:48:26 2010  INFO
    Completing installation for payload at C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
    [    5276] Sun Nov 14 07:48:26 2010 ERROR
    6 Error rolling back command ARKPatchCommand
    [    4956] Sun Nov 14 07:48:27 2010  INFO
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 2 =*=*=*=*=*=*=*=*=*=*=*=*=*
    :: END TIMER :: [Payload Operation :{F9997A85-B21A-48E4-9C8A-7E1352AB1C62}] took 1024.22 miliseconds (1.02422 seconds) DTR = 3.90539 KBPS (0.00381386 MBPS)
    User specified overrideFile:
    Calling the ROLLBACK custom action code for pre-install for payload {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul
    No operation.  We're done:
    Updating driver data - Action: Remove driver entry
    Updating driver data successful. Driver entry was removed. ARP estimated size 0KB
    [    4956] Sun Nov 14 07:48:29 2010  INFO
    Total components installed: 0
    Total components repaired: 0
    Total components removed: 0
    [    4956] Sun Nov 14 07:48:29 2010 ERROR
    The following payload errors were found during install:
    - Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul: Install failed
    [    4956] Sun Nov 14 07:48:29 2010  INFO
    Call PostSession Custom Hook
    :: END TIMER :: [Total Timer] took 7290.45 miliseconds (7.29045 seconds) DTR = 144.298 KBPS (0.140916 MBPS)
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 4 error(s), 0 warning(s)
    ERROR: 6 Command ARKPatchCommand failed.
    ERROR: 6 Error rolling back command ARKPatchCommand
    ERROR: The following payload errors were found during install:
    ERROR:  - Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul: Install failed
    Search the same string above to find when the error occured.
    Exit Code: 7 - Unable to complete Silent workflow
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    END - Installer Session
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

    As an update to my previous post about the installation failure.  I chatted with Adobe Customer Service but they were unable to help and told me to call tech support - last time I did that I was unable to resolve the problem after spending about 2 hours on the phone and they are only open during the week.
    I solved the problem by:
    1) Deactiviating CS5 Master Collection on my computer
    2) Uninstalling the software from the control panel (I did not remove the serial number as I was planning on re-installing.
    3) Downloading and running the Adobe CS5 Cleanup tool.
    4) Reinstalling CS5 MC.
    5) Downloading and installing all of the updates to bring the install up to date.
    I am glad it is working as it should but really had better things to do with the 4-5 hours this took to do. Would be nice to have a tool to fix these types of problem without having to go thru the above especially considering the price the software costs...

  • Multiple Tiger Installations?

    I just can't get my head around this one and would love some feedback from the group.
    I know in the beginning that it was impossible to install Tiger without plastic media and taking over your whole system with the install. I'm wondering if that has changed and if someone has come up with a reliable way to install it on various computers without having to individually boot each computer off of the DVD. I often need to install clean systems on external drives and just have not been able to find a time efficient way to do this. Are there any techies out there with a good plan for this? It's especially time consuming because of all of the updates that have to be reinstalled while booted off the new disk. I know there must be a better way, right?
    Constructive comments very much appreciated!
    much obliged,
    Mick

    You can get family and site license plans for
    multiple machines.
    Yes, of course you're right, but this is not at issue. All the machines have their own Tiger Disks and license.
    Note the retail installer disks only support PowerPC
    Macs.
    Right, good to note. I wasn't sure if they had updated those with a Universal version or not. Interesting choice by Apple not to...
    want to save time and have the license to do so,
    you can always make a system clone with one of the
    cloning software on my FAQ:
    Yes, I love SuperDuper! and clone all the time for various reasons. ShirtPocket and Dave are the absolute ideal ambassadors for everything that is right about shareware today. I cannot recommend the purchase of this software often enough.
    But here's my really big question: Is it possible to build a PPC clone that will run PowerBooks, PPC iMacs and G5 PowerMacs? I know there are driver specific issues and so forth, but where do they lie? In other words, how many clean systems could one build to make it work? Would you only need 2? One for laptops, one for Desktops? Would you need 4, for each line of each? Or does it get worse than that?
    I'm still just trying to design a more time efficient way of helping my clients without having to bill them for all of my time during these drive wipe and clean installs. Obviously, if I could have each of their systems in my shop, I could do it that way, but I'm hoping that I can get them into cloning for back ups and building clean systems on external drives for them while they still get to use their existing system.
    If I use one of my laptops to boot off of build a system for G5 PowerMac will the clone end up with Powerbook specific drivers? I wouldn't have this dilemma if I could still use my desktop while the clean system build was going on.
    Just wondering if there is a way around all of this...
    Note Macs can only take the installer disks which
    came with them or newer retail disks when it comes to
    operating systems. You try and install an iMac G5's
    operating system on an iMac G4 or vice versa, it may
    not necessarily work. Even with an iMac G5 1.8 Ghz
    and 2.1 Ghz.
    This is what I don't fully grok. I've built systems from the Tiger Install DVD (commercial box version) and they've all been just fine because they've usually been booted off of the system they were going to be used for, even if they were install onto an external firewire disk. So far, no misses, but (as you've noted above) it's bound to fail at some point when there are driver issues.
    So how is it done? Are we eventually talking about an installation over a network?... I'm brain dead these days and just can't think creatively about it all.
    Thanks for the ideas and possible solutions.
    cheers,
    Mick

  • Clean installation of windows 8.1 pro on Thinkpad e550 activation problems.

    I have installed a SSD hard drive and need a clean instalations of windows for development using multiple platforms.
    My plan was to have a tri-boot on three partitions on a mbr formated drive.
    -Windows 8.1 Pro 64bit;
    -WIndows 8.1 Pro 32bit, and;
    -WIndows 7 Ultimate 64bit using downgrade rights.
    The following steps were used:
    1. Switching the hard drive and cloning the oem copy to the first partition;
    2. Activate windows getting the OEM key from the system (so I had no hardware changes);
    3.Use the anytime upgrade in the system properties to upgrade to pro;
    4.Clone the windows 7 OS from the old PC and place in on a partion;
    5.Download both install media for windows 8.1 Pro from MS Creating Install media;
    6. Create media as detailed here;
    7. Modify the install to allow entry of key after install as shown here because pro license and oem keys where not acepted during install;
    8.Went to BIOS. Turned on Legacy and disable secure boot;
    9.Install Windows 8.1 both versions, and;
    10. Repair boot to load all three OS.
    Good, Now I have all three OS installed all working. However, The pro product key will not activate the windows 8.1 pro and the oem key won't be acepted saying it is the wrong version of windows.
    So called MS activation line and they say i need to contact the OEM for activation and downgrade keys for 7 even though i paid for the upgrade through the MS store and the product was already activated once on the system.
    Questions:
    1. How can i activate the Windows 8.1 pro via Lenovo?
    2. How can I activate the Windows 7 copy under downgrade rights with Windows 8.1 pro?
    3. Am i missing something with the UEFI/BIOS? (Note:I need to use mbr not GPT format on the drive.)
    I have switch the UEFI mode/duel modes during install without success.

    EvanTPE550 wrote:
    "Is a Win 7 32 virtual client an option?"
    What VC are you using?
    I use VMWare Player (free) and use it to create virtual clients as needed.  Typically the virtual clients are "clean installs" from ISOs.  VMWare has it so well mechanized that there's not much to it.
    It's pretty quick and easy to install Player and give it a try.  Another advantage to that approach is that there's only a single OS at the top level and backups can capture the whole mess w/out having to deal with 2 or 3 different OSs and their partitions.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Lenovo IdeaCentre A720 - Clean Installation Windows 8.1 Pro x64 and Office 2013 x64

    GUIDE: Clean Installation Windows 8.1 Pro x64 and Office 2013 x64
    Note: for a good performance is recommended to use a SSD for Windows with a minimal of 128GB and use the HDD for Data  
    Driver up to date - Sep 2014
    First you need to download and have ready the following softwares:
    Classic Shell V4.1: To get back the Start Button like Windows 7
     http://www.fosshub.com/Classic-Shell.html/ClassicShellSetup_4_1_0.exe
    Broadcom BT for Windows 7 (64-bit) - to enable dongle, Windows 7 Live DVD and USB Drive.
    http://download.lenovo.com/consumer/desktop/h1100174.exe
    Realtek Cardreader Driver Windows 8.1 (64-bit) V6.2.9200.29070. To be able to use the card reader
    http://download.lenovo.com/consumer/desktop/h1101061.exe
    NV VGA Driver for Windows 8.1 (64-bit) V340.52. Latest video driver for NVIDIA video cards
    http://www.nvidia.com/content/DriverDownload-March2009/confirmation.php?url=/Windows/340.52/340.52-n...
    Lenovo Silver Silk Keyboard Driver for Windows 8.1 (64-bit) V1.05. To be able to see when Caps Lock or Number Lock is press
    http://download.lenovo.com/consumer/desktop/h1100842.exe
    Yuan MC907 TV Tuner Driver for Microsoft Windows 7 (64-bit) V6.14.10.416. To be able to use the Yuan TV card
     http://download.lenovo.com/consumer/mobiles/tvt129w8164.exe
    OSD APP for Windows 8.1 (64-bit) V1.1.06. To be able to use UP or Down Volume for Touch keys in the screen.
     http://download.lenovo.com/consumer/desktop/h1100547.exe
    Windows 8.1 x64 Installation DVD and Office 2013 x64
    Follow this procedure for the installation:
    Install Windows 8.1 Pro x64 using the general or personal key
    Just to avoid install an old Video Driver from windows update, disable the Wi-Fi or Interned connection
    Install Office 2013 x64
    Install the Video Driver “340.52-notebook-win8-win7-64bit-international-whql.exe” just let the setup to uncompress the files in “C:\NVIDIA” folder, do not continue to avoid the installation of other software that you may never use. Go to “Device Manager” and Right click properties in the display adapter, press “Driver” - “Update Driver” select browse my computer and give the path “C:\NVIDIA” press next and close after installation finish
    Enable Wi-Fi and open Control Panel – Programs – Turn Windows features on or off and select “.NET Framework 3.5” hit OK, after the installation finish, reboot PC
    Install “ClassicShellSetup_4_1_0.exe” follow instruction and configure the way you may like
    Run file “h1101061.exe”, unselect “Install Realtek Card Reader Driver” and press finish. Path for driver is "C:\EXEBuild\Realtek Card Reader Driver”. Go to “Device Manager” and Right click properties in the unknown devices, press “Driver” - “Update Driver” select browse my computer and give the path “C:\EXEBuild\Realtek Card Reader Driver” press next and close after installation finish
    Install “h1100842.exe” backup driver location is “C:\EXEBuild\Lenovo Silver Silk Keyboard Driver” after installation is done, go to “C:\Program Files (x86)\Lenovo\Lenovo Silver Silk Wireless Keyboard” and Right Click in the file ‘”skd8861.exe” properties – compatibility – change setting for all users and select run compatibility mode for “Windows 7” press OK and OK
    Run “tvt129w8164.exe” unselect “Install TV Tuner” and press finish. Path for driver is “C:\drivers\TV Tuner (Geniatech, Yuan, AverMedia)”. Go to “Device Manager” and Right click properties in the unknown devices, press “Driver” - “Update Driver” select browse my computer and give the path “C:\drivers\TV Tuner (Geniatech, Yuan, AverMedia)” press next and close after installation finish
    Run “h1100547.exe” unselect “Install A7 OSD APP now” and press finish. Path for driver is “D:\EXEBuild\A7 OSD APP”. Run the file “setup.exe” do not reboot the PC and ensure the folder been created during the installation “C:\Program Files (x86)\Lenovo\Lenovo BrgVolOSD” with this two files “BrgVolOSD.exe” and “CD_DLL.dll”, if this fail go to next step, if not, avoid next step. Normally a successful installation of this file depend of “.NET framework 3.5”
    Go to control panel and uninstall “Lenovo OSD”, run the previous “setup.exe” and during the process of the installation, be ready to make a copy for the temporal file name “setup.msi” created in  “C:\Users\YOURUSERNAME\AppData\Local\Temp”, copy file “setup.msi” in “C:\” and run CMD in administrator mode and go to “C:\” using “CD \ + ENTER”, now use the following command “C:\msiexec.exe /a c:\setup.msi + Enter” the folder “C:\Program Files (x86)\Lenovo\Lenovo BrgVolOSD” with this two files “BrgVolOSD.exe” and “CD_DLL.dll” will be created
    Create a shortcut “BrgVolOSD” and copy this in the startup folder “C:\ProgramData\Microsoft\Windows\Start Menu\Programs\StartUp”
    Update Bluetooth driver using windows update if Windows detect the dongle, if not go to next step
    If Bluetooth is not detected, mean that the actual hardware somehow is disabled. In order to enable, boot the PC with a Windows 7 live DVD with the USB drive installed in the PC. After PC been running with Windows 7 live, Install the file “h1100174.exe” previously copy in the USB drive. Use the USB drive also as installation path for the Bluetooth software, when the installation is done, look in the folder “X:\Program Files\Lenovo\Bluetooth Software” and run the file name “BTTray.exe”, press right click in the Red Bluetooth icon on the taskbar to enabled the Bluetooth dongle. Reboot PC in Windows 8.1 without any DVD media inside, this time Windows 8.1 will be able to recognize the Bluetooth and install the respective drivers.
         Another way, install the latest release from Broadcom BTW_12.0.0.9820 from the following link:
                                                                            BTW_12.0.0.9820.zip
         directly in Windows 8.1. Remember if the software is uninstall the Bluetooth will be disabled and
         Windows will not be able to see the device in the “Device Manager”
    Last step, use your own Windows 8.1 Pro Key and Office 2013 key to register and activated your legal copy of the Microsoft software’s.
    Final, enjoy.
    This guide was creates for me to help peoples like me in this community.

    bump

  • Installation Failure: Windows failed to install the following update with error 0x800F0922

    Hi folks,
    I have a HP Elitebook Folio 9470p.  It came with Windows 8, and I installed it on my corporate domain.  I was trying to do some Windows updates so  I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
    to install them one at a time or all of them.  It has about 18 updates it needs from security updates to a .net framework update.  I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
    all up to date.
    I'm at a loss as to what to do.  It gives this error in the event log for each file, Event ID 20.
    Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
    This is the example for KB2862152, but it gives the same error for every one.  I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
    I also deleted folders and files from the SoftwareDistribution folder as well, to no avail.  Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
    Thanks for any help!

    Hi MM. Mr Kywildcat and Vegan Fan,
    GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information  pnly - hoping this could help someone - I resume some actions which allowed this the happy end
    1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
    2) I was influenced by the fact that this
    0x800F0922  error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
    3)   Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
    (whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for  x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
    4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
    5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
    KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
    --> always succesful.
    I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
    to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
    0x800f0922, but 0x80004003 :
    2014-02-15 21:29:13, Info                  CBS    Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
    2014-02-15 21:29:13, Info                  CBS    Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-02-15 21:29:18, Error  CBS    Startup: Failed to process advanced operation queue, startupPhase: 0.  A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
    Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
    issue remains until maybe a new KB corrects it, wrong :-) ?
    And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts. 
    Phil   

  • Can't complete a clean installation of WIN 7 PRO on an Acer Aspire 4738

    Hello,
    If any one could help me with this problem i would really appreciate it.
    I have an Acer Aspire 4738-6888 (icore 5, 3GB RAM, 500GB HD), it was running win 7 ultimate 32 bits but started working erratically so i decided to perform a clean installation. HD was formatted entirely.
    Then tried installing WIN 7 PRO 64 bits from a DVD, but the installation program does not load and shows a kernel error oxc0000098
    It is funny that if i use a WIN 7 PRO 32 bits DVD, the installation programs loads and starts, everything seems to run normally (HD partitions can be created and formatted, Files are expanded and configuration begins) but just after the third restart
    when the assistant shows the message " preparing to run windows for the first time " the blue screen appears showing a "Memory_Management" error. Tried one more time but using a WIN 7 ULTIMATE 32 bits DVD with same results.
    Finally, I tried using the "repair option" from the DVD and get this message:
    StartupRepairOffline
    01: 6.1.7600.16385
    02: 6.1.7600.16385
    03: unknown
    04: 21350397
    05: ExternalMedia
    06: 1
    07: FailureDuringSetup
    OS version: 6.1.7601.2.1.0.256.1
    Regional config: 3082
    Before hand thanks a lot for your help,
    Rgds,
    GCH.

    Hi GustavoCh,
    What issue did you meet so you want to reinstall?
    Could you please use the Windows install image to install Windows in other computer or virtual machine? So we can make sure this issue is not caused by the image.
    I think this issue is related to hardware, please contact the manufacturer for better help.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Adobe Camera Raw 6.7 Installation Failure

    From Adobe Bridge CS5, I enter Help, then Updates.
    Adobe Application Manager informs me that I can update Adobe Camera Raw to 6.7.
    I click to install, the software is downloaded tha I get an Installation Failure message.
    When I click on 'Customer Support' on the screen, I am directed to 'http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html'.
    At no point during the installation was I asked for the serial number.
    Regards
    Mike

    Please confirm your ACR version from Help->About Plugin->Camera Raw and provide us with the following logs.
    You can find them at:
    ACR Installer logs
    For Mac:
    Library\Logs\Adobe\Installer
    For Win:
    Program Files(x86)\Common Files\Adobe\Installers
    AAM logs
    For Mac:
    /Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
    For Win:
    C:\Users\<username>\AppData\Local\Adobe\AAMUpdater
    You can zip all the files together and send us through mail. This would help us in finding the root cause.
    Appreciate your help. Apologize for the inconvenience.
    Regards,
    Ashutosh
    [email protected]

  • Exit Code: 7 during installation. please help

    Hello
    I just bought CS5 Premium Production downloaded from the adobe website and I can't install it! (Win7 64-bit)
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 92 error(s), 107 warning(s)
    WARNING: OS requirements not met for {33A3F995-8333-4676-8D6F-AB7674BB52EA}
    WARNING: OS requirements not met for {53BC789D-073D-47B6-AA9F-DE05990AF07A}
    WARNING: OS requirements not met for {565DE707-5798-4FC3-8DF6-0F58A348A9B0}
    WARNING: OS requirements not met for {5DDABB74-A879-4BE7-A4C6-FD41793942DB}
    WARNING: OS requirements not met for {694213D7-1E0E-4C8F-B822-E2E3680C0FCE}
    WARNING: OS requirements not met for {7816FDDE-40D4-482D-AD7D-97858985DB3E}
    WARNING: OS requirements not met for {A334FDED-DCCA-481E-B226-F902CCC419D2}
    WARNING: OS requirements not met for {AAE6F374-91CB-45FB-9282-4CFA0DED2088}
    WARNING: OS requirements not met for {ABDC1F61-2C50-4BB1-ACDA-66D412D72582}
    WARNING: OS requirements not met for {B8D286BC-A68D-4E74-9F68-8756A49896D8}
    WARNING: OS requirements not met for {C0AA232E-BD1B-40B5-A176-A2BEB67FFAE1}
    WARNING: OS requirements not met for {C21384F7-1A36-4706-95AB-B09BCE3C144F}
    WARNING: OS requirements not met for {CBE4F6C3-788E-4CAC-BA25-26FE39A3BC8C}
    WARNING: OS requirements not met for {CD29B5CA-4727-4114-9AD9-25CCCE6E4014}
    WARNING: OS requirements not met for {DA1B174B-4297-467C-9EF8-0AB8D4D5171E}
    WARNING: OS requirements not met for {DE5DE662-2ECB-4D93-967B-221FBCC8A736}
    WARNING: OS requirements not met for {F319804F-E3A4-4C02-8AEC-CB39A4F6447E}
    WARNING: OS requirements not met for {F9C71630-0EE3-475C-9E2B-ED95AE197DBD}
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    ERROR: MsiConfigureProductEx failed with error: 1612
    ERROR: The following payload errors were found during install:
    ERROR:  - Adobe OnLocation CS5 Royalty Content Wrapper: Install failed
    ERROR:  - Adobe CSXS Infrastructure CS5: Install failed
    ERROR:  - Microsoft_VC90_ATL_x86: Install failed
    ERROR:  - Adobe Media Player: Install failed
    ERROR:  - SiteCatalyst NetAverages: Install failed
    ERROR:  - Microsoft_VC90_CRT_x86: Install failed
    ERROR:  - Adobe Bridge CS5: Install failed
    ERROR:  - Adobe Encore CS5 Third Party Royalty Content: Install failed
    ERROR:  - Microsoft_VC80_ATL_x86: Install failed
    ERROR:  - Recommended Common Fonts Installation x64: Install failed
    ERROR:  - AdobePDFL x64 CS5: Install failed
    ERROR:  - Adobe Encore CS5 Royalty Codecs Installer Wrapper: Install failed
    ERROR:  - DeviceCentral_DeviceCentral3LP-en_GB: Install failed
    ERROR:  - Microsoft_VC80_MFCLOC_x86_x64: Install failed
    ERROR:  - Adobe After Effects CS5 Third Party RoyaltyContent Wrapper: Install failed
    ERROR:  - Adobe Premiere Pro CS5 Third Party Content Wrapper: Install failed
    ERROR:  - Adobe XMP Panels CS5: Install failed
    ERROR:  - Adobe Player for Embedding: Install failed
    ERROR:  - Adobe Premiere Pro CS5_AdobePremierePro5en_USLanguagePack: Install failed
    ERROR:  - Photoshop Camera Raw: Install failed
    ERROR:  - AdobeHelp: Install failed
    ERROR:  - Camera Profiles Installer: Install failed
    ERROR:  - Adobe After Effects CS5 Third Party Content Wrapper: Install failed
    ERROR:  - Adobe Mini Bridge CS5: Install failed
    ERROR:  - Microsoft_VC80_CRT_x86_x64: Install failed
    ERROR:  - Adobe Soundbooth CS5 Codecs Wrapper: Install failed
    ERROR:  - Creative Suite 5 Production Premium: Install failed
    ERROR:  - Adobe ReviewPanel CS5: Install failed
    ERROR:  - Adobe Premiere Pro CS5 Third Party Royalty Content: Install failed
    ERROR:  - Adobe Media Encoder CS5 Dolby X64: Install failed
    ERROR:  - Adobe BrowserLab CS Live: Install failed
    ERROR:  - Photoshop Camera Raw (64 bit): Install failed
    ERROR:  - Microsoft_VC90_MFC_x86: Install failed
    ERROR:  - Adobe After Effects CS5 Support: Install failed
    ERROR:  - CSXS Story Extension: Install failed
    ERROR:  - Adobe Media Encoder CS5 X64: Install failed
    ERROR:  - Adobe After Effects CS5_AdobeAfterEffects10en_USLanguagePack: Install failed
    ERROR:  - Suite Shared Configuration CS5: Install failed
    ERROR:  - Adobe Premiere Pro CS5 Third Party Royalty Content Wrapper: Install failed
    ERROR:  - DeviceCentral: Failed due to Language Pack installation failure
    ERROR:  - AdobeTypeSupport CS5: Install failed
    ERROR:  - Adobe OnLocation CS5_AdobeOnLocation5en_USLanguagePack: Install failed
    ERROR:  - Adobe OnLocation CS5 Royalty Content: Install failed
    ERROR:  - AdobeColorCommonSetRGB: Install failed
    ERROR:  - Adobe Player for Embedding x64: Install failed
    ERROR:  - Required Common Fonts Installation x64: Install failed
    ERROR:  - Microsoft_VC90_ATL_x86_x64: Install failed
    ERROR:  - Adobe CSXS Extensions CS5: Install failed
    ERROR:  - AdobeOutputModule: Install failed
    ERROR:  - Microsoft_VC90_CRT_x86_x64: Install failed
    ERROR:  - Microsoft_VC80_CRT_x86: Install failed
    ERROR:  - AdobeCMaps x64 CS5: Install failed
    ERROR:  - AdobeTypeSupport x64 CS5: Install failed
    ERROR:  - Adobe Media Encoder CS5 PCI WRAPPER X64: Install failed
    ERROR:  - Adobe Encore CS5: Failed due to Language Pack installation failure
    ERROR:  - Microsoft_VC90_MFC_x86_x64: Install failed
    ERROR:  - AdobeColorVideoProfilesAE CS5: Install failed
    ERROR:  - DynamiclinkSupport: Install failed
    ERROR:  - Adobe OnLocation CS5: Failed due to Language Pack installation failure
    ERROR:  - Adobe Soundbooth CS5 Royalty Codecs Wrapper: Install failed
    ERROR:  - Adobe Encore CS5_AdobeEncore5en_USLanguagePack: Install failed
    ERROR:  - Adobe Premiere Pro CS5 Third Party Content: Install failed
    ERROR:  - AdobePDFL CS5: Install failed
    ERROR:  - AdobeCMaps CS5: Install failed
    ERROR:  - Adobe After Effects CS5 Third Party Content: Install failed
    ERROR:  - Adobe Premiere Pro CS5: Failed due to Language Pack installation failure
    ERROR:  - Microsoft_VC80_MFC_x86_x64: Install failed
    ERROR:  - ph: Install failed
    ERROR:  - Required Common Fonts Installation: Install failed
    ERROR:  - Adobe Soundbooth: Failed due to Language Pack installation failure
    ERROR:  - Adobe After Effects CS5 Presets: Install failed
    ERROR:  - Adobe After Effects CS5 Third Party Royalty Content: Install failed
    ERROR:  - AmericanEnglishSpeechAnalysisModels: Install failed
    ERROR:  - Adobe SwitchBoard 2.0: Install failed
    ERROR:  - Microsoft_VC80_MFC_x86: Install failed
    ERROR:  - Pixel Bender Toolkit: Install failed
    ERROR:  - Microsoft_VC80_MFCLOC_x86: Install failed
    ERROR:  - Adobe After Effects CS5: Failed due to Language Pack installation failure
    ERROR:  - Adobe Soundbooth CS5 Codecs: Install failed
    ERROR:  - Recommended Common Fonts Installation: Install failed
    ERROR:  - Adobe Extension Manager CS5: Install failed
    ERROR:  - AdobeJRE: Install failed
    ERROR:  - Adobe Soundbooth_AdobeSoundbooth3en_USLanguagePack: Install failed
    ERROR:  - Adobe ExtendScript Toolkit CS5: Install failed
    ERROR:  - Adobe Soundbooth CS5 Royalty Codecs: Install failed
    ERROR:  - AdobeMotionPicture CS5: Install failed
    ERROR:  - Adobe AIR: Install failed
    ERROR:  - Adobe Premiere Pro CS5 Support: Install failed
    ERROR:  - Adobe Media Encoder CS5 Dolby WRAPPER X64: Install failed
    ERROR:  - Adobe Media Encoder CS5 PCI X64: Install failed
    Can you help please?

    run the msi manually for which the error (ERROR: MsiConfigureProductEx failed with error: 1612) occurred (refer installer log ). MSI will prompt a browse dialog with message like it failed to locate, there you need to browse to point to msi itself. Once the MSI is installed successfully, re-run the installer.

  • Aperture doesn't open after clean installation of Mountain Lion

    I have just done a clean installation  of mountain lion.
    After that, I have downloaded my copy of aperture from the store and installed it ( i think, just becase when done, at the store says that it is installed )
    But when I try to launch aperture from de applications menu, an error appears and aperture quits immediatelly. The error says that, "an error has occurred. You should reinstall aperture or could be your operating system is not supported", more or less, translating it from the Spanish.
    I have been searching for the installed files with finder, but nothing seems to be installed at the hard disk. Even the library that tipically appears at the Pictures folder doesn't appear.
    Could somebody help me, please?
    kind regards to everybody.

    Many thanks for your answer.
    Attached detailed message or error that I get:
    Process:         Aperture [311]
    Path:            /Applications/Aperture.app/Contents/MacOS/Aperture
    Identifier:      com.apple.Aperture
    Version:         3.4.3 (3.4.3)
    Build Info:      Aperture-310022000000000~2
    App Item ID:     408981426
    App External ID: 12009533
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [117]
    User ID:         501
    Date/Time:       2013-01-02 18:22:43.533 +0100
    OS Version:      Mac OS X 10.8.2 (12C60)
    Report Version:  10
    Interval Since Last Report:          26292 sec
    Crashes Since Last Report:           13
    Per-App Crashes Since Last Report:   13
    Anonymous UUID:                      94615913-F3B0-01D5-C740-D0C4474C62F7
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
      Referenced from: /Applications/Aperture.app/Contents/MacOS/Aperture
      Reason: no suitable image found.  Did find:
              /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager: no matching architecture in universal wrapper
              /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager: no matching architecture in universal wrapper
    Binary Images:
           0x10b1b9000 -        0x10b90efff  com.apple.Aperture (3.4.3 - 3.4.3) <01A802BA-0100-3F80-947C-A8FEA4726352> /Applications/Aperture.app/Contents/MacOS/Aperture
           0x10bb2b000 -        0x10bb34ff7  com.apple.PhotoFoundation (1.0 - 10.17) <C40F985F-9C0A-389A-9E21-684EB0A5B160> /Applications/Aperture.app/Contents/Frameworks/PhotoFoundation.framework/Versio ns/A/PhotoFoundation
           0x10bbad000 -        0x10c0cdfff  com.apple.RedRock (1.9.4 - 310.33) <9B94495A-2267-3684-B6E8-9FE3D4B46495> /Applications/Aperture.app/Contents/Frameworks/RedRock.framework/Versions/A/Red Rock
           0x10c3d8000 -        0x10c45bfff  com.apple.iLifePageLayoutCore (1.0 - 200.9) <8AAC1EB9-5823-3624-A525-635C2A77C34E> /Applications/Aperture.app/Contents/Frameworks/iLifePageLayoutCore.framework/Ve rsions/A/iLifePageLayoutCore
           0x10c4bb000 -        0x10c4c0fff  com.apple.iLifePhotoStreamConfiguration (3.4 - 2.5) <906317D7-09FF-3B77-8F35-01BB74C0109C> /Applications/Aperture.app/Contents/Frameworks/iLifePhotoStreamConfiguration.fr amework/Versions/A/iLifePhotoStreamConfiguration
           0x10c4cb000 -        0x10c4fcff7  com.apple.iLifeAssetManagement (2.7 - 40.34) <E4E1A39C-E8AE-31D5-9C50-B392EBAD7447> /Applications/Aperture.app/Contents/Frameworks/iLifeAssetManagement.framework/V ersions/A/iLifeAssetManagement
           0x10c533000 -        0x10c540ff7  com.apple.iphoto.AccountConfigurationPlugin (1.2 - 1.2) <0F515DED-D77E-3E4F-876D-F5CE596A844C> /Applications/Aperture.app/Contents/Frameworks/AccountConfigurationPlugin.frame work/Versions/A/AccountConfigurationPlugin
           0x10c552000 -        0x10c5f5ff7  com.apple.MobileMe (13 - 1.0.4) <9A7FCC99-67CE-3F5E-98BB-9079B305087F> /Applications/Aperture.app/Contents/Frameworks/MobileMe.framework/Versions/A/Mo bileMe
        0x7fff6adb9000 -     0x7fff6aded93f  dyld (210.2.3) <36CAA36E-72BC-3E48-96D9-B96A2DF77730> /usr/lib/dyld
        0x7fff8883c000 -     0x7fff88842fff  com.apple.DiskArbitration (2.5.1 - 2.5.1) <F7DAF7CC-5893-3F06-9168-3B0192B66D15> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
        0x7fff88d4c000 -     0x7fff88efafff  com.apple.QuartzCore (1.8 - 304.0) <897FAA5D-FF13-33FE-878B-B164D684F019> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
        0x7fff89fa9000 -     0x7fff8a133fff  com.apple.WebKit (8536 - 8536.26.14) <7C4D5DE6-7153-3E54-8D4F-BB2E9AE74878> /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
        0x7fff8af6a000 -     0x7fff8af6afff  com.apple.Cocoa (6.7 - 19) <1F77945C-F37A-3171-B22E-F7AB0FCBB4D4> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
        0x7fff8b977000 -     0x7fff8b9e4ff7  com.apple.framework.IOKit (2.0 - 755.18.10) <142E19DD-1C8D-3D61-ABC8-83994A73279F> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
        0x7fff8c5bb000 -     0x7fff8c5bbfff  com.apple.ApplicationServices (45 - 45) <A3ABF20B-ED3A-32B5-830E-B37831A45A80> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
        0x7fff8d628000 -     0x7fff8d8a8ff7  com.apple.AOSKit (1.05 - 151) <A34E8584-797C-318F-9E25-937A710C68AB> /System/Library/PrivateFrameworks/AOSKit.framework/Versions/A/AOSKit
        0x7fff8e571000 -     0x7fff8e580ff7  com.apple.opengl (1.8.6 - 1.8.6) <720CC06C-0D01-37AE-BB3D-D7F0242B262A> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
        0x7fff8f584000 -     0x7fff8f584fff  com.apple.Carbon (154 - 155) <1B2846B1-384E-3D1C-8999-201215723349> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
        0x7fff904f1000 -     0x7fff907c1fff  com.apple.security (7.0 - 55179.1) <639641EF-8156-3190-890C-1053658E044A> /System/Library/Frameworks/Security.framework/Versions/A/Security
        0x7fff919b9000 -     0x7fff91a56ff7  com.apple.PDFKit (2.7.2 - 2.7.2) <DE5BE2EF-2570-3792-B1C3-AAD45765F533> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/PDFKit.framew ork/Versions/A/PDFKit
        0x7fff92574000 -     0x7fff92574fff  com.apple.CoreServices (57 - 57) <9DD44CB0-C644-35C3-8F57-0B41B3EC147D> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
        0x7fff932d0000 -     0x7fff934b9fff  com.apple.CoreFoundation (6.8 - 744.12) <EF002794-DAEF-31C6-866C-E3E3AC387A9F> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
        0x7fff9443e000 -     0x7fff9443efff  com.apple.Accelerate (1.8 - Accelerate 1.8) <6AD48543-0864-3D40-80CE-01F184F24B45> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
        0x7fff94441000 -     0x7fff94492ff7  com.apple.SystemConfiguration (1.12.2 - 1.12.2) <E095637C-457F-3D8F-AE32-A032F9D5A46C> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
    Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.53f13
    Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
    Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: Hitachi HDE721010SLA330, 1 TB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2
    USB Device: Elements 1042, 0x1058  (Western Digital Technologies, Inc.), 0x1042, 0x24100000 / 3
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 3

  • Importing Mail Mailboxes after a clean installation of Lion

    I have had to re-install Lion (10.7.3, a clean installation). I have now been able to download messages still on my Internet provider's server, but how can I transfer them from my bootable cloned copy of my entire system, made just before re-installing the OS?
    Mail offers to export messages (Mailbox >Export Mailbox). Could I boot on my cloned backup, export each mailbox, then in some way import them into the new Lion system?
    But my Mail's File > Import Mailboxes is greyed out, and Apple's Help ("Import mailboxes" doesn't work).
    Or could I drag the old mailboxes from the backup, but where are they?
    I have a Time Machine backup which will have the messages, but again, where? I mounted TM, tried Mail > Import Mailboxes and selected the Mail application. TM whirred for ages and I eventually had to force quit mail after the SBOD appeared.
    Hoping for some ideas.

    If you are installing from the DMG, I think so.   However, once installed to a hard drive or flash drive as a bare bones bootable 10.7 system the only time an internet connection would be needed is if you have Software Update setup in System Preferences, or Quicktime setup in System Preferences for updating your software.
    You can setup a clone software on that bootable drive such as Superduper or Carbon Copy Cloner that can get you off the ground and running to verify that you aren't having any hardware issues with your system, instead of trying to eliminate software issues on a fully loaded 10.7 system.
    Of course you'd want two clone backups of your fully loaded system before you tried that.  A Time Machine backup of your fully loaded system can work too, as long as it is to a hard drive that is at least twice as large as the original.
    The only reason to keep the DMG version of it around is if you lack the space or funds for space to have a fully installed backup.  But then you are depending on the internet anyway!

  • DPM 2010 installation failure (SQL-server Reporting Services Problem)

    Hi everyone,
    The last 2 days I have been trying to get DPM 2010 installed on a DC. I know this is not recommended, but for our company with the current setup it's the only way to do it.
    I have been reading some Microsoft articles (http://technet.microsoft.com/en-us/library/ff399416.aspx) about doing this but I fail to do so.
    I have made all of the right service accounts (I guess) and am doing everything in the guide but still get the same error message over and over again:
    Setup has detected that the installation of Reporting Services is not correctly configured or no instance of Reporting Services is linked to DPM2010 of SQL Server
    I just can't get my head around it. This is the error message when I try to install DPM 2010 using an existing SQL-database which I have configured in the SQL 2008-server sp1 installation.
    I have enclosed some screenshots so you could maybe check some things that are not correct? Hopefully we can get this issue resolved, because it's driving me crazy to be honest!
    Physical server which is ADC and where I need to install SQL-server and DPM: VMBACKUP
    The service account for DPM is: DPMSQLSvcsAcct
    Also have another service account: DPMR$VMBACKUP
    I have also enclosed the error log located in C:\DPMLogs\

    This is the DOM error log:
    MSI (s) (D0:4C) [14:59:59:626]: Windows Installer reconfigured the product. Product Name: Microsoft Application Error Reporting. Product Version: 12.0.6015.5000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 0.
    MSI (s) (D0:4C) [14:59:59:627]: Deferring clean up of packages/files, if any exist
    MSI (s) (D0:4C) [14:59:59:628]: MainEngineThread is returning 0
    MSI (s) (D0:D8) [14:59:59:631]: RESTART MANAGER: Session closed.
    MSI (s) (D0:D8) [14:59:59:631]: No System Restore sequence number for this installation.
    === Logging stopped: 27/03/2012 14:59:59 ===
    MSI (s) (D0:D8) [14:59:59:632]: User policy value 'DisableRollback' is 0
    MSI (s) (D0:D8) [14:59:59:632]: Machine policy value 'DisableRollback' is 0
    MSI (s) (D0:D8) [14:59:59:632]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (D0:D8) [14:59:59:632]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (D0:D8) [14:59:59:633]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (D0:D8) [14:59:59:633]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
    MSI (s) (D0:D8) [14:59:59:634]: Restoring environment variables
    MSI (s) (D0:D8) [14:59:59:634]: Destroying RemoteAPI object.
    MSI (s) (D0:90) [14:59:59:635]: Custom Action Manager thread ending.
    MSI (c) (9C:04) [14:59:59:636]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
    MSI (c) (9C:04) [14:59:59:637]: MainEngineThread is returning 0
    === Verbose logging stopped: 27/03/2012 14:59:59 ===
    [27/03/2012 14:59:59] Information : MsiInstallProduct returned 0.
    [27/03/2012 14:59:59] Information : End install.
    [27/03/2012 14:59:59] Information : **************************************************************************************
    [27/03/2012 14:59:59] Information : **************************************************************************************
    [27/03/2012 14:59:59] Information : Start Inspect.
    [27/03/2012 14:59:59] Information : Check processor configuration.
    [27/03/2012 14:59:59] Information : Query WMI provider for configuration of processor. (Namespace : \\localhost\root\cimv2).
    [27/03/2012 14:59:59] Information : Query for WMI class. (Query : SELECT * FROM Win32_Processor).
    [27/03/2012 15:00:00] Data : Clock speed of processor = 2500
    [27/03/2012 15:00:00] Data : Manufacturer of processor = GenuineIntel
    [27/03/2012 15:00:00] Information : Check the amount of RAM.
    [27/03/2012 15:00:00] Information : Query WMI provider for configuration of memory. (Namespace : \\localhost\root\cimv2).
    [27/03/2012 15:00:00] Information : Query for WMI class. (Query : SELECT * FROM Win32_OperatingSystem).
    [27/03/2012 15:00:00] Data : Found memory = 14677964
    [27/03/2012 15:00:00] Data : Total amount of memory = 14677964
    [27/03/2012 15:00:00] Information : Check the version of Microsoft Management Console on the machine.
    [27/03/2012 15:00:00] Data : Version of Microsoft Management Console on the machine = 6.1.7600.16385
    [27/03/2012 15:00:00] Data : Required version of Microsoft Management Console = 5.2.3790.2560
    [27/03/2012 15:00:00] Information : MMC correct version is detected.
    [27/03/2012 15:00:00] Information : Check if this machine is part of active directory.
    [27/03/2012 15:00:00] Data : Looking for Active Directory node = LDAP://RootDSE
    [27/03/2012 15:00:00] Information : Active Directory is detected on this machine.
    [27/03/2012 15:00:00] Information : Check if the machine role is Domain Controller.
    [27/03/2012 15:00:00] Information : Query for WMI class. (Query : SELECT * FROM Win32_ComputerSystem).
    [27/03/2012 15:00:00] Data : Localhost in Computer role = 4
    [27/03/2012 15:00:00] * Warning : DPM Setup has detected that this computer is a domain controller.Make sure that you have followed the steps given in the link below before proceeding with the DPM Setup.
    [27/03/2012 15:00:00] Information : The machine role is a Domain Controller.
    [27/03/2012 15:00:00] Information : Check if Volsnap QFE is applied.
    [27/03/2012 15:00:00] Information : Volsnap QFE is applied on this system.
    [27/03/2012 15:00:00] Information : Check if Logical Disk Manager (LDM) QFE is applied.
    [27/03/2012 15:00:00] Information : LDM QFE is applied on this system.
    [27/03/2012 15:00:00] Information : Check if KB962975 QFE is applied.
    [27/03/2012 15:00:00] Information : KB962975 QFE is applied on this system.
    [27/03/2012 15:00:00] Information : Check if KB975759 QFE is applied.
    [27/03/2012 15:00:00] Information : KB975759 QFE is applied on this system.
    [27/03/2012 15:00:00] Information : Check if KB955543 QFE is applied.
    [27/03/2012 15:00:00] Information : KB955543 QFE is applied on this system.
    [27/03/2012 15:00:00] Information : Detect if Powershell is installed.
    [27/03/2012 15:00:00] Data : Installed Version of Windows Powershell. = 6.1.7600.16385
    [27/03/2012 15:00:00] Data : Minimum Required version of Windows Powershell. = 6.0.6002.18111
    [27/03/2012 15:00:00] Information : Required version of Powershell software is installed on this system.
    [27/03/2012 15:00:00] Information : Check if reboot is required because of Dot Net installation.
    [27/03/2012 15:00:00] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\DotNetRequiredReboot.
    [27/03/2012 15:00:00] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\DotNetRequiredReboot is absent.
    [27/03/2012 15:00:00] Information : Reboot is not required.
    [27/03/2012 15:00:00] Information : Detect if SIS Service is running.
    [27/03/2012 15:00:00] Information : Detect if SIS Filter service SIS is running.
    [27/03/2012 15:00:00] Information : SIS Service SIS is running on this system.
    [27/03/2012 15:00:00] Information : Check the version of Windows Installer on the machine.
    [27/03/2012 15:00:00] Data : Version of Windows Installer on the machine = 5.0.7601.17514
    [27/03/2012 15:00:00] Data : Required version of Windows Installer = 4.5.6001.18000
    [27/03/2012 15:00:00] Information : Windows Installer correct version is detected.
    [27/03/2012 15:00:00] Information : Check if Removable Storage Service (Rsm) is disabled or not.
    [27/03/2012 15:00:00] Information : Query WMI provider for Service Details. (Namespace : \\VMBACKUP\root\cimv2).
    [27/03/2012 15:00:00] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='NtmsSvc').
    [27/03/2012 15:00:01] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: NtmsSvc : Service not found
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetServiceConfig(String serviceName, String machineName, ConnectionOptions wmiConnectionOptions)
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectConfigs.CheckRsmServiceConfig(InspectContext context)
    [27/03/2012 15:00:01] Information : Check if reboot is required.
    [27/03/2012 15:00:01] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired.
    [27/03/2012 15:00:01] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired is absent.
    [27/03/2012 15:00:01] Information : Reboot is not required.
    [27/03/2012 15:00:01] Information : Check if SQL Server 2008 is installed.
    [27/03/2012 15:00:01] Information : Query WMI provider for SQL Server 2008. (Namespace : \\VMBACKUP\root\Microsoft\SqlServer\ComputerManagement10).
    [27/03/2012 15:00:01] Information : Query for WMI class. (Query : Select * from SqlServiceAdvancedProperty where ServiceName='{0}' and PropertyName='Version').
    [27/03/2012 15:00:01] Information : SQL Server 2008 MSDPM2010 instance is not present on this system.
    [27/03/2012 15:00:01] *** Error : Setup has detected that the instance provided is not a SQL Server 2008 instance. Please provide a SQL Server 2008 instance having Service Pack 1 installed.
    [27/03/2012 15:00:01] Information : Check if SQL Server 2008 Tools is installed.
    [27/03/2012 15:00:01] Information : SQL Server 2008 Tools is installed
    [27/03/2012 15:00:01] Information : Check if SQL Server 2008 SP1 is applied.
    [27/03/2012 15:00:01] Information : Query WMI provider for SQL Server 2008 SP1. (Namespace : \\VMBACKUP\root\Microsoft\SqlServer\ComputerManagement10).
    [27/03/2012 15:00:01] Information : Query for WMI class. (Query : Select * From SqlServiceAdvancedProperty Where ServiceName='MSSQL$MSDPM2010' AND PropertyName = 'SPLEVEL').
    [27/03/2012 15:00:02] Information : Sql Server 2008 Service Pack Level is 0
    [27/03/2012 15:00:02] Information : SQL Server 2008 SP1 is not present on MSDPM2010 instance of this system.
    [27/03/2012 15:00:02] *** Error : Setup has detected that SQL Server 2008 Service Pack 1 has not been installed on the VMBACKUP\MSDPM2010 instance.Install SQL Server 2008 Service Pack 1 or higher and try again.
    [27/03/2012 15:00:02] Information : Check SQL Server Agent service configuration.
    [27/03/2012 15:00:02] Data : SQL Server instance name = MSDPM2010
    [27/03/2012 15:00:02] Information : Query WMI provider for Service Details. (Namespace : \\VMBACKUP\root\cimv2).
    [27/03/2012 15:00:02] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='SQLAgent$MSDPM2010').
    [27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: SQLAgent$MSDPM2010 : Service not found
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetServiceConfig(String serviceName, String machineName, ConnectionOptions wmiConnectionOptions)
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectConfigs.CheckSqlAgentServiceConfig(InspectContext context)
    [27/03/2012 15:00:02] *** Error : Service SQLAgent$MSDPM2010 is not installed. The SQL Server 2008 installation is not valid.Uninstall SQL Server 2008 and then run DPM Setup again.
    [27/03/2012 15:00:02] Information : SQL Server Agent service configuration is not correct.
    [27/03/2012 15:00:02] Information : Check SQL Server service configuration.
    [27/03/2012 15:00:02] Data : SQL Server instance name = MSDPM2010
    [27/03/2012 15:00:02] Information : Query WMI provider for Service Details. (Namespace : \\VMBACKUP\root\cimv2).
    [27/03/2012 15:00:02] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='MSSQL$MSDPM2010').
    [27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: MSSQL$MSDPM2010 : Service not found
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetServiceConfig(String serviceName, String machineName, ConnectionOptions wmiConnectionOptions)
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectConfigs.CheckSqlServerServiceConfig(InspectContext context)
    [27/03/2012 15:00:02] *** Error : Service MSSQL$MSDPM2010 is not installed. The SQL Server 2008 installation is not valid.Uninstall SQL Server 2008 and then run DPM Setup again.
    [27/03/2012 15:00:02] Information : SQL Server service configuration is not correct.
    [27/03/2012 15:00:02] Information : Detect if SQL Server is evaluation edition
    [27/03/2012 15:00:02] Information : Check for existing database.
    [27/03/2012 15:00:02] Information : Starting service
    [27/03/2012 15:00:02] Data : Service name = MSSQL$MSDPM2010
    [27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: MSSQL$MSDPM2010 ---> System.InvalidOperationException: Service MSSQL$MSDPM2010 was not found on computer 'VMBACKUP'. ---> System.ComponentModel.Win32Exception: The specified service does not exist as an installed service
    --- End of inner exception stack trace ---
    at System.ServiceProcess.ServiceController.GenerateNames()
    at System.ServiceProcess.ServiceController.get_ServiceName()
    at System.ServiceProcess.ServiceController.GenerateStatus()
    at System.ServiceProcess.ServiceController.get_Status()
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.StartService(String serviceName, String machineName, Boolean restart)
    --- End of inner exception stack trace ---
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.CheckServiceStartError(String serviceName, InvalidOperationException invalidOperationException)
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.StartService(String serviceName, String machineName, Boolean restart)
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.StartSqlService(String instanceName, String sqlServerMachineName)
    [27/03/2012 15:00:02] Information : Dpmdb does not exist on this system.
    [27/03/2012 15:00:02] Information : Check if SQL Server 2008 Reporting Services is installed.
    [27/03/2012 15:00:02] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services. (Namespace : \\VMBACKUP\root\Microsoft\SqlServer\ReportServer\RS_MSDPM2010\v10\admin).
    [27/03/2012 15:00:02] Information : Query for WMI class. (Query : SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSDPM2010').
    [27/03/2012 15:00:02] * Exception : => System.Management.ManagementException: Invalid namespace
    at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
    at System.Management.ManagementScope.InitializeGuts(Object o)
    at System.Management.ManagementScope.Initialize()
    at System.Management.ManagementObjectSearcher.Initialize()
    at System.Management.ManagementObjectSearcher.Get()
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetRosettaConfigFilePath(String sqlServerMachineName, String sqlInstanceName, ConnectionOptions connectionOptions)
    [27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportServerNotInstalledException: Report server is not installed ---> System.Management.ManagementException: Invalid namespace
    at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
    at System.Management.ManagementScope.InitializeGuts(Object o)
    at System.Management.ManagementScope.Initialize()
    at System.Management.ManagementObjectSearcher.Initialize()
    at System.Management.ManagementObjectSearcher.Get()
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetRosettaConfigFilePath(String sqlServerMachineName, String sqlInstanceName, ConnectionOptions connectionOptions)
    --- End of inner exception stack trace ---
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetRosettaConfigFilePath(String sqlServerMachineName, String sqlInstanceName, ConnectionOptions connectionOptions)
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectReportingPrerequisites.CheckSqlServerReportingServices(InspectContext context)
    [27/03/2012 15:00:02] Information : SQL Server 2008 Reporting Services MSDPM2010 instance is not installed.
    [27/03/2012 15:00:02] *** Error : Setup has detected that the installation of Reporting Services is not correctly configured or no instance of Reporting Services is linked to MSDPM2010 of SQL Server.1)To use the local dedicated MSDPM2010 instance with DPM, uninstall SQL Server and run setup again.
    2)To use the option of installing DPM with an existing instance of SQL Server, make sure that the Reporting Services instance is also installed and linked correctly. For details, refer to DPM Setup Help.
    [27/03/2012 15:00:02] Information : Check SQL Server 2008 Reporting Services report server service configuration.
    [27/03/2012 15:00:02] Information : Query WMI provider for Service Details. (Namespace : \\VMBACKUP\root\cimv2).
    [27/03/2012 15:00:02] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='ReportServer$MSDPM2010').
    [27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: ReportServer$MSDPM2010 : Service not found
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetServiceConfig(String serviceName, String machineName, ConnectionOptions wmiConnectionOptions)
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectReportingPrerequisites.CheckRosettaServicesConfig(InspectContext context)
    [27/03/2012 15:00:02] *** Error : Service ReportServer$MSDPM2010 is not installed. The SQL Server 2008 Reporting Services installation is not valid.Uninstall SQL Server 2008 Reporting Services and then run DPM Setup again.
    [27/03/2012 15:00:02] Information : Report Server service configuration is not correct.
    [27/03/2012 15:00:02] Information : End Inspect.
    [27/03/2012 15:00:02] Information : **************************************************************************************
    [27/03/2012 15:00:02] Information : Instantiating inspect component.
    [27/03/2012 15:00:02] Data : Path of output xml = \PostInstallInspect.xml
    [27/03/2012 15:00:03] Information : <<< Dialog >>> Inspect Page : Leaving
    [27/03/2012 15:00:03] Information : <<< Dialog >>> User Information Page : Entering
    [27/03/2012 15:00:03] Data : Purchased Client Agent Licenses = 0
    [27/03/2012 15:00:03] Data : Purchased Standard Agent Licenses = 0
    [27/03/2012 15:00:03] Data : Purchased Enterprise Agent Licenses = 0
    [27/03/2012 15:00:09] Information : <<< Dialog >>> User Information Page : Leaving
    [27/03/2012 15:00:09] Data : Purchased Client Agent Licenses = 0
    [27/03/2012 15:00:09] Data : Purchased Standard Agent Licenses = 0
    [27/03/2012 15:00:09] Data : Purchased Enterprise Agent Licenses = 0
    [27/03/2012 15:00:09] Information : <<< Dialog >>> Install location Page : Entered
    [27/03/2012 15:00:09] Information : Check if the media is removable
    [27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM
    [27/03/2012 15:00:09] Data : Drive Name = C:\
    [27/03/2012 15:00:09] Data : Drive Type = 3
    [27/03/2012 15:00:09] Information : Check attributes of the directory
    [27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM
    [27/03/2012 15:00:09] * Exception : Ignoring the following exception intentionally => System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Microsoft DPM'.
    File name: 'C:\Program Files\Microsoft DPM'
    at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
    at System.IO.File.GetAttributes(String path)
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [27/03/2012 15:00:09] Information : Query free disk space
    [27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM
    [27/03/2012 15:00:09] Data : Free Space = 2373
    [27/03/2012 15:00:09] Information : Query free disk space
    [27/03/2012 15:00:09] Data : Folder Path = C:\Windows\system32
    [27/03/2012 15:00:09] Data : Free Space = 2373
    [27/03/2012 15:00:09] Information : Check if the media is removable
    [27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
    [27/03/2012 15:00:09] Data : Drive Name = C:\
    [27/03/2012 15:00:09] Data : Drive Type = 3
    [27/03/2012 15:00:09] Information : Check attributes of the directory
    [27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
    [27/03/2012 15:00:09] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft DPM\DPM\DPMDB'.
    at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
    at System.IO.File.GetAttributes(String path)
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [27/03/2012 15:00:09] Information : Query free disk space
    [27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
    [27/03/2012 15:00:09] Data : Free Space = 2373
    [27/03/2012 15:00:11] Information : Check if the media is removable
    [27/03/2012 15:00:11] Data : Folder Path = C:\Program Files\Microsoft DPM
    [27/03/2012 15:00:11] Data : Drive Name = C:\
    [27/03/2012 15:00:11] Data : Drive Type = 3
    [27/03/2012 15:00:11] Information : Check attributes of the directory
    [27/03/2012 15:00:11] Data : Folder Path = C:\Program Files\Microsoft DPM
    [27/03/2012 15:00:11] * Exception : Ignoring the following exception intentionally => System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Microsoft DPM'.
    File name: 'C:\Program Files\Microsoft DPM'
    at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
    at System.IO.File.GetAttributes(String path)
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [27/03/2012 15:00:11] Information : Query free disk space
    [27/03/2012 15:00:11] Data : Folder Path = C:\Program Files\Microsoft DPM
    [27/03/2012 15:00:11] Data : Free Space = 2373
    [27/03/2012 15:00:11] Information : Query free disk space
    [27/03/2012 15:00:11] Data : Folder Path = C:\Windows\system32
    [27/03/2012 15:00:11] Data : Free Space = 2373
    [27/03/2012 15:00:17] Information : Check if the media is removable
    [27/03/2012 15:00:17] Data : Folder Path = D:\Program Files\Microsoft DPM
    [27/03/2012 15:00:17] Data : Drive Name = D:\
    [27/03/2012 15:00:17] Data : Drive Type = 3
    [27/03/2012 15:00:17] Information : Check attributes of the directory
    [27/03/2012 15:00:17] Data : Folder Path = D:\Program Files\Microsoft DPM
    [27/03/2012 15:00:17] Data : File Attributes = Directory
    [27/03/2012 15:00:17] Information : Query free disk space
    [27/03/2012 15:00:17] Data : Folder Path = D:\Program Files\Microsoft DPM
    [27/03/2012 15:00:17] Data : Free Space = 786513
    [27/03/2012 15:00:17] Information : Query free disk space
    [27/03/2012 15:00:17] Data : Folder Path = C:\Windows\system32
    [27/03/2012 15:00:17] Data : Free Space = 2373
    [27/03/2012 15:00:18] Information : Check if the media is removable
    [27/03/2012 15:00:18] Data : Folder Path = D:\Program Files\Microsoft DPM
    [27/03/2012 15:00:18] Data : Drive Name = D:\
    [27/03/2012 15:00:18] Data : Drive Type = 3
    [27/03/2012 15:00:18] Information : Check attributes of the directory
    [27/03/2012 15:00:18] Data : Folder Path = D:\Program Files\Microsoft DPM
    [27/03/2012 15:00:18] Data : File Attributes = Directory
    [27/03/2012 15:00:18] Information : Check if the media is removable
    [27/03/2012 15:00:18] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
    [27/03/2012 15:00:18] Data : Drive Name = C:\
    [27/03/2012 15:00:18] Data : Drive Type = 3
    [27/03/2012 15:00:18] Information : Check attributes of the directory
    [27/03/2012 15:00:18] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
    [27/03/2012 15:00:18] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft DPM\DPM\DPMDB'.
    at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
    at System.IO.File.GetAttributes(String path)
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [27/03/2012 15:00:18] Information : Check the filesystem on which DPM and prerequisites are installed
    [27/03/2012 15:00:18] Information : D:\Program Files\Microsoft DPM
    [27/03/2012 15:00:18] Information : C:\Windows\system32
    [27/03/2012 15:00:18] Information : Query free disk space
    [27/03/2012 15:00:18] Data : Folder Path = D:\Program Files\Microsoft DPM
    [27/03/2012 15:00:18] Data : Free Space = 786513
    [27/03/2012 15:00:18] Information : Query free disk space
    [27/03/2012 15:00:18] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
    [27/03/2012 15:00:18] Data : Free Space = 2373
    [27/03/2012 15:00:18] Information : Query free disk space
    [27/03/2012 15:00:18] Data : Folder Path = C:\Windows\system32
    [27/03/2012 15:00:18] Data : Free Space = 2373
    [27/03/2012 15:00:18] Data : Location of program files = D:\Program Files\Microsoft DPM
    [27/03/2012 15:00:18] Data : Location of database files = C:\Program Files\Microsoft DPM\DPM\DPMDB
    [27/03/2012 15:00:18] Information : <<< Dialog >>> Install location Page : Leaving
    [27/03/2012 15:00:27] Data : Path of inspection output xml = C:\\DPMLogs\RemoteDbInspectReport.xml
    [27/03/2012 15:00:27] Information : Instantiating inspect component.
    [27/03/2012 15:00:27] Data : Path of output xml = C:\\DPMLogs\RemoteDbInspectReport.xml
    [27/03/2012 15:00:27] Information : **************************************************************************************
    [27/03/2012 15:00:27] Information : Start Inspect.
    [27/03/2012 15:00:27] Information : Check if SQL Server 2008 is installed.
    [27/03/2012 15:00:27] Information : Query WMI provider for SQL Server 2008. (Namespace : \\localhost\root\Microsoft\SqlServer\ComputerManagement10).
    [27/03/2012 15:00:27] Information : Query for WMI class. (Query : Select * from SqlServiceAdvancedProperty where ServiceName='{0}' and PropertyName='Version').
    [27/03/2012 15:00:28] Information : SQL Server 2008 DPM2010 instance is present on this system.
    [27/03/2012 15:00:28] Information : Check if SQL Server 2008 SP1 is applied.
    [27/03/2012 15:00:28] Information : Query WMI provider for SQL Server 2008 SP1. (Namespace : \\localhost\root\Microsoft\SqlServer\ComputerManagement10).
    [27/03/2012 15:00:28] Information : Query for WMI class. (Query : Select * From SqlServiceAdvancedProperty Where ServiceName='MSSQL$DPM2010' AND PropertyName = 'SPLEVEL').
    [27/03/2012 15:00:28] Information : Sql Server 2008 Service Pack Level is 3
    [27/03/2012 15:00:28] Information : SQL Server 2008 SP1 is present on DPM2010 instance of this system.
    [27/03/2012 15:00:28] Information : Check SQL Server Agent service configuration.
    [27/03/2012 15:00:28] Data : SQL Server instance name = DPM2010
    [27/03/2012 15:00:28] Information : Query WMI provider for Service Details. (Namespace : \\localhost\root\cimv2).
    [27/03/2012 15:00:28] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='SQLAgent$DPM2010').
    [27/03/2012 15:00:29] Data : Credentials of the service = MANAGEMENT\DPMSQLSvcsAcct
    [27/03/2012 15:00:29] Information : SQL Server Agent service configuration is correct.
    [27/03/2012 15:00:29] Information : Check SQL Server service configuration.
    [27/03/2012 15:00:29] Data : SQL Server instance name = DPM2010
    [27/03/2012 15:00:29] Information : Query WMI provider for Service Details. (Namespace : \\localhost\root\cimv2).
    [27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='MSSQL$DPM2010').
    [27/03/2012 15:00:29] Data : Credentials of the service = MANAGEMENT\DPMSQLSvcsAcct
    [27/03/2012 15:00:29] Information : SQL Server service configuration is correct.
    [27/03/2012 15:00:29] Information : Detect if SQL Server is evaluation edition
    [27/03/2012 15:00:29] Information : Check the disk space for remote database.
    [27/03/2012 15:00:29] Information : Remote Db disk space required : 900 MB disk space available = 786513 MB
    [27/03/2012 15:00:29] Information : Check the Named Pipes protocol for remote database.
    [27/03/2012 15:00:29] Information : Query WMI provider for Service Details. (Namespace : \\localhost\root\cimv2).
    [27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='MSSQL$DPM2010').
    [27/03/2012 15:00:29] Information : Check for existing database.
    [27/03/2012 15:00:29] Information : Starting service
    [27/03/2012 15:00:29] Data : Service name = MSSQL$DPM2010
    [27/03/2012 15:00:29] Data : Current status of service = Running
    [27/03/2012 15:00:29] Information : Service is already running
    [27/03/2012 15:00:29] Data : Database connection string = Pooling = false;Integrated Security=SSPI;database=master;server=np:localhost\DPM2010
    [27/03/2012 15:00:29] Information : Dpmdb does not exist on this system.
    [27/03/2012 15:00:29] Information : DPM database DPMDB is missing or corrupt.If you are performing a clean installation of DPM, you must delete the DPM database before you run Setup. If you are upgrading or repairing an existing installation of DPM, you must restore a valid DPM database, and then proceed with Setup.
    [27/03/2012 15:00:29] Information : Check whether the remote db msi has been installed.
    [27/03/2012 15:00:29] Information : Check DPM Database Version.
    [27/03/2012 15:00:29] Data : Database connection string = Pooling = false;Integrated Security=SSPI;database=DPMDB;server=localhost\DPM2010
    [27/03/2012 15:00:29] * Exception : Expecting the following exception. Ignoring intentionally. => System.Data.SqlClient.SqlException: Cannot open database "DPMDB" requested by the login. The login failed.
    Login failed for user 'MANAGEMENT\DPMSQLSvcsAcct'.
    at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
    at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
    at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
    at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
    at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
    at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
    at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
    at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
    at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
    at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
    at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
    at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
    at System.Data.SqlClient.SqlConnection.Open()
    at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlContext.Open()
    at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectDls.CheckDBVersion(InspectContext context)
    [27/03/2012 15:00:29] Information : detectResult = DPMDBAbsent
    [27/03/2012 15:00:29] *** Error : DPM Setup has detected that the DPM database files are missing from the selected instance of SQL Server 2008.Make sure that the correct database files are attached to the selected instance of SQL Server and then install DPM 2010 again.
    [27/03/2012 15:00:29] Information : Checking if DPM db backup is needed.
    [27/03/2012 15:00:29] Information : This is not upgrade path, so no DB Backup needed
    [27/03/2012 15:00:29] Information : DPM DB Backup is not needed.
    [27/03/2012 15:00:29] Information : Check if SQL Server 2008 Reporting Services is installed.
    [27/03/2012 15:00:29] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services. (Namespace : \\localhost\root\Microsoft\SqlServer\ReportServer\RS_DPM2010\v10\admin).
    [27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM2010').
    [27/03/2012 15:00:29] Data : Path of configuration file for SQL Server 2008 Reporting Services = D:\Program Files\Microsoft SQL Server\MSRS10.MSRS10\Reporting Services\ReportServer\RSReportServer.config
    [27/03/2012 15:00:29] Information : Query WMI provider for instance linked to SQL Server 2008 Reporting Services. (Namespace : \\localhost\root\Microsoft\SqlServer\ReportServer\RS_DPM2010\v10\admin).
    [27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM2010').
    [27/03/2012 15:00:29] Data : Database server for SQL Server 2008 Reporting Services = VMBACKUP\DPM2010
    [27/03/2012 15:00:29] Information : SQL Server 2008 Reporting Services DPM2010 instance is installed and linked to SQL Server VMBACKUP\DPM2010.
    [27/03/2012 15:00:29] *** Error : Setup has detected that the installation of Reporting Services is not correctly configured or no instance of Reporting Services is linked to DPM2010 of SQL Server.1)To use the local dedicated DPM2010 instance with DPM, uninstall SQL Server and run setup again.
    2)To use the option of installing DPM with an existing instance of SQL Server, make sure that the Reporting Services instance is also installed and linked correctly. For details, refer to DPM Setup Help.
    [27/03/2012 15:00:29] Information : Check SQL Server 2008 Reporting Services report server service configuration.
    [27/03/2012 15:00:29] Information : Query WMI provider for Service Details. (Namespace : \\localhost\root\cimv2).
    [27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='ReportServer$DPM2010').
    [27/03/2012 15:00:29] Data : Credentials of the service = MANAGEMENT\DPMSQLSvcsAcct
    [27/03/2012 15:00:29] Information : Report Server service configuration is correct.
    [27/03/2012 15:00:29] Information : Check Reporting SecureConnectionLevel.
    [27/03/2012 15:00:29] Information : Getting the reporting secure connection level for localhost/DPM2010
    [27/03/2012 15:00:29] Information : Setup detected that the Reporting SecureConnectionLevel is 0.
    [27/03/2012 15:00:29] Information : End Inspect.
    [27/03/2012 15:00:29] Information : **************************************************************************************

Maybe you are looking for

  • Macbook Pro Retina, HDMI Sound issues

    When I connect my macbook pro retina to my SONY TV via HDMI the picture works but I can't get any sound.  I went into the sound settings and selected SONY but it tells me the select a device has no output controls.

  • Assertion failed when returning to a jsp

    Hi, I am using JSF Final and Struts-faces (nightly). This error is bizarre because it's an error on the view tag. I'm getting this error message when something fails in the resulting action and I send it back to the same jsp using getInputForward():

  • Info about installing Seibel 8.1 on Linux Ubuntu or other DIstribution

    Dear all, I need to find out the tools and steps needed to set up my Seible on Linux and it would be perfection if it could function normally on Ubuntu distribution so please if any one knows how, feed me back ASAP Please. Thanks in advance for your

  • Authentication on OnDemand for WebServices

    Hi, We are developing an interface from Siebel to CRM On Demand. We imported the Account WSDL into Siebel. I do not see any login method in the WSDL. So when sending XML from Siebel to On Demand, how do I send the authentication? Will it be as part o

  • ID attribute in JSF components

    Hello, I have a question about the id attribute on JSF 2 components. The document says, that it should be a String. Does that mean String constant or could it also be a el-expression resulting to a String. Actually I can use el-expression for id, but