Multiple client installs

Hello,
I need to upgrade 150 clients to 11g. The oracle client is used to connect from MS access 2003 as a front end.
Is there a way to include the oracle client in a Microsoft Installer (.msi), rather than running the OUI 150 times?

- You could create a response file for the OUI that would allow the installation to happen silently and push the install command to the clients however you would otherwise push installs to the various clients
- You could write your own .msi installer, but that's probably a pain
- If you don't really need the 11g client, you could use the 10g Instant Client, which just requires a handful of DLLs to be installed and can pretty easily be scripted in a .msi installer. Or you could wait for the 11g Instant Client to be released.
Justin

Similar Messages

How to determine Oracle_Home default from multiple home installation?

Does anyone know how to determine the current Oracle Home default in the registry when multiple Oracle Home exists?
Both 8i and multiple 9i Version X's exist on a client machine. We need to determine the current default oracle home to determine path for various drivers.
In analyzing the Oracle Home registry keys I have been unable to find a means for identifying the current Oracle Home default.

Thank you for you reply, your advice is good. Unfortunately our application has to deal with all kinds of Oracle configurations and one of those is the multi-home issue. We have looked throughout the registry particular in the HKLM\SOFTWARE\ORACLE|ALL_HOMES\
but have not found any entry that would indicate a default home. One two different system installation of multiple client installations there is no DEFAULT_HOME. We do have the HOME0, HOME1, ... HOME4 but, these are just sequencial based on when they where installed not on the order of preference or any default setting. Problem is our application needs to know the default home to locate the appropriate drives to use and appropriate connects service to look-up(tnsname) also.
Thanks.

Issue with multiple application installation and server share

Hi,
SCCM 2007 SP2 R3 ICP2
All servers W2K8R2
I am having an issue with software installs. When using a variable for multiple applciation installs, I get access errors when the applications go to install. It appears to be a multiple connection issue, but I can't figure out why.
I am using server shares for my DPs. The proper permissions are set. The servers (DP) are W2K8R2. I think it has to do with the way R2 handles the conenctions. I want to know if this is a known issue or if anyone has come accross
it.
I am going to post in the software distribution forum as well, but thought this would be a config question.

Hi! I'm waking up this dead thread but I've got a *very* similar problem!
I've got a SCCM 2007 SP2 R3 installation on Win2008. All clients are in the same ConfigMgr-site. Multiple package deploy in the same site-boundary as the CM-server works excellent. (We've got three DPs in the same site-boundary as the
CM-server itself.)
Now, we have a new site-boundary with it's own Protected DP where multiple package deploy fails
but the same packages, being run from the task-sequnce works! So then the client can download, install and run the packages from the proteced DP just fine. All "single" packages install fine before the "Multiple Appliaction"-step.
I've tripple checked that we're running the same packages when we're installing Multiple Packages as we do in the Task-Sequence. And
the same Task-sequence with the Multiple Package installation step
works fine in our site-boundary where the ConfigMgr-server is installed.
Here's the log from a client trying to access and install one of three packages through the the Install Multiple Packages task-sequence step.
<![LOG[Policy SMS10000-CEN000BD-25FE0E9B downloaded successfully]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:597"> <![LOG[SMS PackageID = CEN000BD]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:247"> <![LOG[Source version = 2]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:296"> <![LOG[SMS Program Name = RESTORE]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:317"> <![LOG[::CompressBuffer(65536,-1)]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:695"> <![LOG[Compression (zlib) succeeded: original size 26608, compressed size 3254.]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:484"> <![LOG[Policy for CEN000BD:"RESTORE" successfully stored in environment]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:331"> <![LOG[Downloaded policies successfully]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:725"> <![LOG[Installing pkg 'CEN000BD', program 'BACKUP']LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsinstaller.cpp:290"> <![LOG[Resolving content for SMS Package CEN000BD]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:768"> <![LOG[Getting local network information.]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1846"> <![LOG[GetAdaptersAddressess entry point is supported.]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:118"> <![LOG[DhcpGetOriginalSubnetMask entry point is supported.]LOG]!><time="16:01:20.937+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:181"> <![LOG[Adapter {B3FC51BA-75F3-4C93-98D3-72ECE4B7A6A2} is DHCP enabled. Checking quarantine status.]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:509"> <![LOG[Adapter {B3FC51BA-75F3-4C93-98D3-72ECE4B7A6A2} has 1 IPv4 address(es).]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="2" thread="3040" file="ccmiputil.cpp:540"> <![LOG[Executing content location request for CEN000BD:2 as GUID:87F78866-5FCB-43FE-A2F7-07DA7F6863DF]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1852"> <![LOG[Initializing CLibSMSMessageHeader with authenticator]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1103"> <![LOG[Sending RequestContentLocations]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:3367"> <![LOG[Messaging Auth Using V4 Mode]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="libsmsmessaging.cpp:1400"> <![LOG[Formatted header:]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1500"> <![LOG[<Msg SchemaVersion="1.1" ReplyCompression="zlib"><ID/><SourceID>GUID:87F78866-5FCB-43FE-A2F7-07DA7F6863DF</SourceID><SourceHost/><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:OSD</ReplyTo><Priority>3</Priority><Timeout>3600</Timeout><SentTime>2011-12-12T15:01:21Z</SentTime><Protocol>http</Protocol><Body Type="ByteRange" Offset="0" Length="618"/><Hooks><Hook2 Name="clientauth"><Property Name="Token"><![CDATA[CCMClientID: BBA60FFE-10D3-42AA-88BF-CBAC68CA4BB4 CCMClientIDSignature: 3F5C9150307B32713AB75C2BD3431AFCB0816854881F6450868D120ABA7FC4424EF3407E6BD2531E32EBF4A89D92440D3BD9E68078A8BB5B899905A765C4AC28B1D837A0D58EB02C55048B1BA97BF0319B02276D87846F4748C2FBAA887C8921989CB07E15BD6685BFC84792B1C9E91EE140DA03BA01FBBF7F6EF824F5FFAF15 CCMClientTimestamp: 2011-12-12T22:02:17Z CCMClientTimestampSignature: 4E28E6E6EEF71EB4A6FDE54155100F67610556C0E5F81DF82B6AB03608C1745485D65AB09F195D384903AB60DD9993118FCECCC3C9E85F5A9C0CB6E949A5F8DF305B7A5E64E0D98973AF12E034E468B6E7CC03FE23DC3DEB686CBA63FADD895F61D7034504C018F6F20561F40B47BC20509423C2385032A3AA6866F266409F1E]]></Property></Hook2></Hooks><Payload Type="inline"/><TargetHost/><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><CorrelationID/></Msg> ]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1501"> <![LOG[CLibSMSMessageWinHttpTransport::Send: URL: STOSCCM02.INTERNT.SVT.SE:443 CCM_POST /ccm_system_AltAuth/request]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7446"> <![LOG[In SSL, but with no client cert]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7596"> <![LOG[In SSL, but with no media cert]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7602"> <![LOG[The request has succeeded. 200 OK]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="libsmsmessaging.cpp:7734"> <![LOG[Decompressing reply body.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:2395"> <![LOG[::DecompressBuffer(65536)]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:735"> <![LOG[Filtering Content Locations.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1883"><![LOG[Decompression (zlib) succeeded: original size 522, uncompressed size 2128.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:646"><![LOG[ Adding \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD\ to Local DP list.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1938">
 <![LOG[Found 0 DPs in subnet, 1 DPs in local site, 0 DPs in remote location and 0 Multicast DPs]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1974">
<![LOG[Shuffling HTTP local DP list.]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2012">
<![LOG[Shuffling Local DP list.]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2087">
<![LOG[Attempting to connect to \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD\]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:2151">
<![LOG[Deleting any existing network connections to "\\vaxcmdp01.domain.com\*".]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:407">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:34.974+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:37.985+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:42.711+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:45.721+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:50.400+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:53.411+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:58.090+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:01.100+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:05.780+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:08.790+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:13.469+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:16.480+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:21.174+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:24.185+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:28.911+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:31.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:36.600+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:39.611+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:44.290+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[dwErr, HRESULT=800704c3 (e:\nts_sms_fre\sms\framework\tscore\tsconnection.cpp,517)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:517">
<![LOG[Failed to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD" (1219)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="3" thread="3040" file="tsconnection.cpp:517">
<![LOG[!slistSMBPaths.empty(), HRESULT=80040103 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,2163)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2163">
<![LOG[TS::Utility::GetContentLocations( pszPackageId, L"", lSourceVersion, m_sSiteCode, m_sManagementPoint, &m_oHttpTransport, sClientID, TRUE, sNetworkAccessAccount, sNetworkAccessPassword, TRUE, TRUE, slistSMBPaths, slistHttpPaths ), HRESULT=80040103 (e:\nts_sms_fre\sms\client\osdeployment\installsoftware\dsutils.cpp,843)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:843">
<![LOG[Content location request for CEN000BD:2 failed, hr=0x80040103]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="3" thread="3040" file="dsutils.cpp:843">
While installing a single package from the same DP (VAXCMDP01) looks like this:
![LOG[PackageID = 'CEN000D1']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:332">
<![LOG[BaseVar = '', ContinueOnError='']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:333">
<![LOG[SwdAction = '0002']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:334">
<![LOG[GetExecRequestMgrInterface successful]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="installsoftware.cpp:218">
<![LOG[Retrieving value from TSEnv for '_SMSTSPolicyCEN000D1_Install']LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="installsoftware.cpp:85">
<![LOG[::DecompressBuffer(65536)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:735">
<![LOG[Decompression (zlib) succeeded: original size 2844, uncompressed size 22640.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:646">
<![LOG[ADV_AdvertisementID=CEN20022]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:1119">
<![LOG[PKG_PSF_ContainsSourceFiles=TRUE]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:1138">
<![LOG[::DecompressBuffer(65536)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:735">
<![LOG[Decompression (zlib) succeeded: original size 12, uncompressed size 4.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:646">
<![LOG[SoftDist paused cookie = 16271]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:181">
<![LOG[Found the location for the package _SMSTSCEN000D1. The location is on \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="resolvesource.cpp:3146">
<![LOG[nPos != CCM::Utility::String::npos, HRESULT=80004005 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,253)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="resolvesource.cpp:253">
<![LOG[Creating a connection to \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\ with default account]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="resolvesource.cpp:2243">
<![LOG[Connection request for "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:208">
<![LOG[No credentials available for connecting to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1". See whether the share has already been connected.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:233">
<![LOG[Connecting to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.510+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:268">
<![LOG[Successfully connected to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.588+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:287">
<![LOG[SMS PkgID 'CEN000D1' resolved to location '\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\']LOG]!><time="15:29:13.635+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:145">
Notice that it never checks for DPs in the same way as the multiple package install:
<![LOG[Found 0 DPs in subnet, 1 DPs in local site, 0 DPs in remote location and 0 Multicast DPs]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1974">
I know that the TS checks package dependencies before executing the TS. That's not possible with Multiple packages since they are variable dependant. I think this is somehow related although it doesn't explain why my client can't authenticate properly.
The Network Access Account is a member of Domain Users and Domain Users have Read Access on the share and on the folder of the VAXCMDP01 DP - which should be identically configured to our other DPs closest to our ConfigMgr Server.
Any ideas?
Kind regards,
Mathias

Rich client installation package

Hi,
Is it possible to create a dedicated rich client installation package. the target users of this application rarely need all the other tools in the enterprise client package.
And this package is quite big and hard to distribute.
Best regards
Thomas

Hello Thomas,
multiple possibilities here.
Since XI3.0 you can pretty good script the installation. So you could script the Client Installer and select only the packages you need. Best would be to open a Comman Box, Browse to the unzipped Client installer package and rum "setup.exe -?" to see whats possible
The other way would be a 3rd Party Vendor. For example MS Management can distribute Software packages. But there are a lot of other vendors too.
Regards
-Seb.

Client installation with Solaris 11 AI technology

Hi,
Just needed one clarification relevant the way clients get installed with the AI concept for Sol11.
I have setup an AI server have a common manifest file, system config file for my client systems.
While installing the client, I just specify the env variable AI_HOSTNAME and AI_IPV4 to the relevant client, and the installation happens successfully for the client.
The clarification that I needed was, can't I export AI_HOSTNAME and AI_IPV4 to multiple client systems in one go and create multiple separate profiles for the client and carry out client provisioning. As when I tried testing this, somehow I see that the last address is taken and the client installation received the same public IP for the machine and hence cribbed for duplicate IP found.
Should the installation happen one by one only?
Any help here is truly appreciated!
Regards

Also, AI_IPV4 could be replaced by the value assigned by DHCP when the AI client was booted, or perhaps from OBP variable network-boot-arguments for SPARC. As DHCP can assign the same IP address for different systems at different times, this could result in duplicate IP addresses.
You may want to look at Using SC Profile Templates - {{AI_HOSTNAME}} variable not being used

Ep 6.0 single backend multiple clients

Dear all,
system details: ecc 5.0 unicode sap aba 16, basis 16,appl 11,hr 19+MSSQL 2000 with collation bin2 (SP4) and windows 2003. EP 6.0 SP9 WebAS 6.40 sr1
First i installed portal with rapid installer 2.5.1 but it connects only with client 000. i tried to give client 100 at installation time but it was not accepted.
Then i installed with netweaver 04 dvd. it accepted client 100.
now my company want that portal should be connected to multiple client with backend system as my backend system is development and they will check first in a sandbox client and then with user testing in a test client.
How to do this.
Secondly, in user management>role "page cannot be displayed" error and this error is coming only in this page.
One thing i should tell you that when i installed with rapid installer it was working fine with client 000 but when i changed the client in system landscape i was able to logon no tab displayed. the message was that the user may not have proper authorizations. may be something to do with portal roles. I want to know how can i transport these portal roles or user config to other clients.
in WP3R, it says no object found.
Can anyone help
Thanks
Imran Hasware

HI Imran,
u used User management with ABAP system than u have to assign the role to user from R3 system side. after assignning a role u start the J2EE server.
check the follwoing
http://help.sap.com/saphelp_nw04/helpdata/en/49/9dd53f779c4e21e10000000a1550b0/content.htm
regards,
kaushal

Accessing the same stateful session bean from multiple clients in a clustered environment

I am trying to access the same stateful session bean from multiple
 clients. I also want this bean to have failover support so we want to
 deploy it in a cluster. The following description is how we have tried
 to solve this problem, but it does not seem to be working. Any
 insight would be greatly appreciated!
 I have set up a cluster of three servers. I deployed a stateful
 session bean with in memory replication across the cluster. A client
 obtains a reference to an instance of one of these beans to handle a
 request. Subsequent requests will have to use the same bean and could
 come from various clients. So after using the bean the first client
 stores the handle to the bean (actually the replica aware stub) to be
 used by other clients to be able to obtain the bean. When another
 client retrieves the handle gets the replica aware stub and makes a
 call to the bean the request seems to unpredictably go to any of the
 three servers rather than the primary server hosting that bean. If the
 call goes to the primary server everything seems to work fine the
 session data is available and it gets backed up on the secondary
 server. If it happens to go to the secondary server a bean that has
 the correct session data services the request but gives the error
 <Failed to update the secondary copy of a stateful session bean from
 home:ejb20-statefulSession-TraderHome>. Then any subsequent requests
 to the primary server will not reflect changes made on the secondary
 and vice versa. If the request happens to go to the third server that
 is not hosting an instance of that bean then the client receives an
 error that the bean was not available. From my understanding I thought
 the replica aware stub would know which server is the primary host for
 that bean and send the request there.
 Thanks in advance,
 Justin


 If 'allow-concurrent-call' does exactly what you need, then you don't have a problem,
 do you?
 Except of course if you switch ejb containers. Oh well.
 Mike
 "FBenvadi" <[email protected]> wrote:
 >I've got the same problem.
 >I understand from you that concurrent access to a stateful session bean
 >is
 >not allowed but there is a
 >token is weblogic-ejb-jar.xml that is called 'allow-concurrent-call'
 >that
 >does exactly what I need.
 >What you mean 'you'll get a surprise when you go to production' ?
 >I need to understand becouse I can still change the design.
 >Thanks Francesco
 >[email protected]
 >
 >"Mike Reiche" <[email protected]> wrote in message
 >news:[email protected]...
 >>
 >> Get the fix immediately from BEA and test it. It would be a shame to
 >wait
 >until
 >> December only to get a fix - that doesn't work.
 >>
 >> As for stateful session bean use - just remember that concurrent access
 >to
 >a stateful
 >> session bean is not allowed. Things will work fine until you go to
 >production
 >> and encounter some real load - then you will get a surprise.
 >>
 >> Mike
 >>
 >> [email protected] (Justin Meyer) wrote:
 >> >I just heard back from WebLogic Tech Support and they have confirmed
 >> >that this is a bug. Here is their reply:
 >> >
 >> >There is some problem in failover of stateful session beans when its
 >> >run from a java client.However, it is fixed now.
 >> >
 >> >The fix will be in SP2 which will be out by december.
 >> >
 >> >
 >> >Mike,
 >> >Thanks for your reply. I do infact believe we are correctly using
 >a
 >> >stateful session bean however it may have been misleading from my
 >> >description of the problem. We are not accessing the bean
 >> >concurrently from 2 different clients. The second client will only
 >> >come into play if the first client fails. In this case we want to
 >be
 >> >able to reacquire the handle to our stateful session bean and call
 >it
 >> >from the secondary client.
 >> >
 >> >
 >> >Justin
 >> >
 >> >"Mike Reiche" <[email protected]> wrote in message
 >news:<[email protected]>...
 >> >> You should be using an entity bean, not a stateful session bean
 >for
 >> >this application.
 >> >>
 >> >> A stateful session bean is intended to be keep state (stateful)
 >for
 >> >the duration
 >> >> of a client's session (session).
 >> >>
 >> >> It is not meant to be shared by different clients - in fact, if
 >you
 >> >attempt to
 >> >> access the same stateful session bean concurrently - it will throw
 >> >an exception.
 >> >>
 >> >> We did your little trick (storing/retrieving handle) with a stateful
 >> >session bean
 >> >> on WLS 5.1 - and it did work properly - not as you describe. Our
 >sfsb's
 >> >were not
 >> >> replicated as yours are.
 >> >>
 >> >> Mike
 >> >>
 >> >> [email protected] (Justin Meyer) wrote:
 >> >> >I am trying to access the same stateful session bean from multiple
 >> >> >clients. I also want this bean to have failover support so we want
 >> >to
 >> >> >deploy it in a cluster. The following description is how we have
 >tried
 >> >> >to solve this problem, but it does not seem to be working. Any
 >> >> >insight would be greatly appreciated!
 >> >> >
 >> >> >I have set up a cluster of three servers. I deployed a stateful
 >> >> >session bean with in memory replication across the cluster. A client
 >> >> >obtains a reference to an instance of one of these beans to handle
 >> >a
 >> >> >request. Subsequent requests will have to use the same bean and
 >could
 >> >> >come from various clients. So after using the bean the first client
 >> >> >stores the handle to the bean (actually the replica aware stub)
 >to
 >> >be
 >> >> >used by other clients to be able to obtain the bean. When another
 >> >> >client retrieves the handle gets the replica aware stub and makes
 >> >a
 >> >> >call to the bean the request seems to unpredictably go to any of
 >the
 >> >> >three servers rather than the primary server hosting that bean.
 >If
 >> >the
 >> >> >call goes to the primary server everything seems to work fine the
 >> >> >session data is available and it gets backed up on the secondary
 >> >> >server. If it happens to go to the secondary server a bean that
 >has
 >> >> >the correct session data services the request but gives the error
 >> >> ><Failed to update the secondary copy of a stateful session bean
 >from
 >> >> >home:ejb20-statefulSession-TraderHome>. Then any subsequent requests
 >> >> >to the primary server will not reflect changes made on the secondary
 >> >> >and vice versa. If the request happens to go to the third server
 >that
 >> >> >is not hosting an instance of that bean then the client receives
 >an
 >> >> >error that the bean was not available. From my understanding I
 >thought
 >> >> >the replica aware stub would know which server is the primary host
 >> >for
 >> >> >that bean and send the request there.
 >> >> >
 >> >> >Thanks in advance,
 >> >> >Justin
 >>
 >
 >

Oracle 8.1.7 Client Installation Error

Could anyone tell me what's wrong when JREW error occur during Oracle Client Installation? How to overcome this problem?
The details are:
This program has performed an illegal operation and will be shut down.
Jrew caused an invalid page fault in module JAVAI.DLL at 018f:6ee37f8a.
Registers: ......
(OS Win98)
Thanks in advance.

You are aware that the 8.1.7 client is only going to enable you to connect to Oracle systems, right? It's not the Oracle 8.1.7 database.
You should be able to unzip the file and find the Oracle Universal installer which will actually install the 8.1.7 Client for you.

We have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc. from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when

Hello All,
we have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc.
from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when we are trying to access the share folder with IP it asking for credentials i have type again and again
correct credential but unable to access that. If i re-share the folder then we are access it but when we are restarted the system then same problem is occurring.
I have checked IP,DNS,Gateway and more each & everything is well.
Pls suggest us.
Pankaj Kumar

Hi,
According to your description, my understanding is that the same shared folder can be accessed by name, but can’t be accessed be IP address and asks for credentials.
Please try to enable the option below on the device which has shared folder:
Besides, check the Advanced Shring settings of shared folder and confrim that if there is any limitation settings.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Multiple BAM installations on the same machine?

Hi guys,
I have a customer with the following requirement:
"We have installed BAM 10.1.3.3 with EL and upgraded to 10.1.3.4. It is currently using a remote database 10.2.0.3 in our test envt. We want to use the same Windows server for monitoring our Development enviroment also using the Dev database. Is it feasible or will it corrupt the IIS of the windows machine already running BAM 10.1.3.4. Please provide your recommendations on this, whether to have separate windows servers or we can have multiple BAM installations on same server."
Any ideas on this?
Thanks in advance,
Catalin
Oracle Support Services

Multiple BAM 10g installations on the same box is not supported.

WDS 2012 R2 - Cannot PXE multiple clients at the same time

Hello All,
This is my first post on here so I apologize if this is the wrong place. I work for a school district and we are implementing WDS 2012 R2. We've been extremely satisfied with the speeds and ease of use through unattend files. However, for
the past month I've been looking for a possible answer to a problem that has plagued us from day one of implementation.
So here's the problem:
I have a stand alone WDS server which is not a domain controller and is not our DHCP server. I have IP helpers and broadcast forwarders setup on the network. As well as option 66 and 67 in DHCP. So far so good right!
Well that's partially right. When we boot one client at a time to the WDS server. Everything works as intended. We can TFTP the necessary files from the WDS server. Everything boots up and we're off and running.
However, if we boot up two or more clients at the same time. The WDS server never responds to the traffic. The clients get their DHCP information. They start the referral and download from the WDS server, but get no response. I'm
really hoping that someone on here would have some insight of something I can try. I've about exhausted my list of peers and contacts. They're all stumped as well and were smart enough to stay with 2008 WDS.
I would prefer to stick with 2012 R2 since it's setup and working for the most part. With only this one hiccup.
Thanks in advance for any guidance!

Hello Daniel,
I appreciate the reply and apologize for taking so long to get back to this. Things have been a little hectic over here.
I have tried everything on this forum and I am still unsuccessful in PXE booting multiple clients at the same time.
Multicast is enabled on the server, and it works for the clients. However, as stated in the original post. I cannot boot multiple machines at the same time. I can start them from the image selection screen around the same time though. So,
that appears to be working fine.

How to use multiple clients within JCO?

Hi,
I'm pretty new to configuring Web Dynpro's with it's JCO connections. I have the following question.
We are using one portal (SAP EP 6.0_640 SP15) and one R/3 system (SAP ECC 5.0) with multiple clients (multiple customers who are all using the same portal).
Do I have to deploy a web dynpro for each client and maintain it's JCO connection for each client?
Or is there another way how I can set this up?
Thanks in advance.
Kind regards,
Dave Arends

Hi Dave,
Do I have to deploy a web dynpro for each client and maintain it's JCO connection for each client?
Or is there another way how I can set this up?
You dont need to deploy a web dynpro for each client . You can use same JCO connection for multiple User ID's ( multiple Clients mean multiple user ID's on the same portal ).
If this is the case then single JCo connection is enough to pull data from R/3 and show on portal page .
Thanks,
Nanda

How to control one server with multiple clients via TCP/IP

I am wanting to control a single server with multiple clients. Only one client would be active at a time, so there would be no conflict. I want to use TCP/IP. So far, I have programmed a cluster that passes data back to the server with no problems. The challenge come in when a second client is added to the mix. I have't been able to figure out how to turn each client on and send the appropriate data and then turn it off so it doesn't keep sending the same data to the server.
Here are the things that I have considered and did some preliminary testing, but don't really know how to impliment:
1. Send a numeric on the front of the cluster packet that tells the server that data is on the way.
2. Send a boolean on the front of the cluster packet to somehow turn the server TCP/IP on.
The problem I have found is that LabVIEW TCP/IP doesn't like to be turned on and off. If it doesn't get the data it expects, it goes into a reset mode and that kills the response time.
Any help?

You should consider implementing a set of simple one-byte commands that can be sent back and forth between the Server and the Clients. You can base all of these ideas off the example in the Example Finder under Networking >> TCP and UDP called Multiple Connections - Server.
You will have two loops in the server VI: one to wait for new connections, and one to send and receive data from the existing connections. For instance, after one of the clients connects, it can request control of the server to send data to it by sending the character "R" for request. Every time the send/receive loop of the Server executes, the first thing it can do is to check all the existing connections to see if any of the clients have sent a control request ("R"). If so, it will create a buffer (array) of control requests. This could be in the form of Connection IDs or indexes in the array for a particular Connection ID. Your choice.
After the Server receives a request for contol, if it is not already under control by another client, then it can send a response to the first client on the control request list. For instance, the server could send the first client a "S" command for send. Note that after the clients send their control request, they should execute a TCP Read and wait indefinitely for the server to respond with the one-byte "S" command. Then, once the client in control is finished sending data to the server, it could send the character "X" telling the Server to release it from control.
The example I mentioned above already does a similar thing. Note how when a client wants to disconnect, they send the letter "Q". You can see this in the Multiple Connections - Client VI. The Server then checks each individual connection to see if it's received this one-byte command, and if it has, it closes the connection to the client. This is what you would want to implement, but instead of having just one command, you'll have to distinguish between a few and build up a buffer of control requests.
Finally, if a client does decide to disconnect in your application, they could send the command "Q" just like the example above. At this point, close the connection and remove that Connection ID from the array of connections. You will also have to handle the case that this client was in the request control waiting line when it disconnected, in which case you need to delete it from that array as well.
This will definitely work for you, but it will take some work. Best of luck!
Jarrod S.
National Instruments

What are the possible approches for hosting a product(custom SP application) for multiple clients on a single SharePoint farm?

We have a product which is a custom application based on SharePoint Foundation 2010. Right now, for each of our client we create a dedicated server and host the application in the standalone deployment. Now, the requirement is to host multiple clients in a
farm deployment.
Challenges are: 1. The product has same name for the wsp that is deployed on different client servers as of now. How to distinguish for different clients on same farm
Currently the product specific css and jquery is in 14 hive. These files will be of difefrent versions for different client. How to segregate that?
How many web applications is recommend to be created in a single SPF 2010 farm? What are the challenges?
There are a couple of DBs created in SQL for the application. What is the best way to separate those for the client?
Essentially its the same product but with different versions for each client that we want to deploy in a single farm. What is the best practice to tackle this?

For the most part, these are not SharePoint questions per se, but product-specific questions you'd better ask the vendor about. To get in some more detail:
1. It totally depends on the scope of the solution. If its global, then you're out of luck and any changes you make affect all instances that use it. Better ask the vendor about it.
2. Not that many, let's say < 10, assuming you're web applications have separate application pools. Check out http://technet.microsoft.com/en-us/library/cc262787(v=office.14).aspx#WebApplication for
more info.
3. This is very application specific and really should be answered by the vendor. Not related to SharePoint at all.
4. Again, really depends on the product so better ask the vendor.
Good luck!
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Is it possbile to have multiple clients on our Production instance

We have our Production system with client 101
Our abapers want me to create another client 500 (config only - not easy to accomplish) to be used for our Mexican users.
I told them to create another company code for Mexico, but they do not know how to do this.
DO I have any other options, of yes
Pros and cons of having multiple clients in same production instance.
I know that any independent code is going to effect all clients.
THanks
Joe

Hi Jo,
you CAN create a new client, but mostly this is not done, because the effort to maintain multiple clients is mostly higher than just different company codes. Yes, ABAPs are client indpendent and therefore valid for all clients.
So, the argument, to "not know" how to create different company codes is not valid to me !
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Multiple client installs

Similar Messages

Maybe you are looking for