Multiple Clients on same network over internet

Alright, on my G5 at work I can control my powerbook from home via ARD, but I also have an ibook on the network here at home too, along with my powerbook. Can you only control one computer on a network over the internet? I have the powerbook set up with 5900 on the airport express, and the ibook with 5901, both have 3283 enabled. No firewall on the computers themselves, but as I said I have port forwarding set up for both machines. Now when I have ARD open on the G5 at my office I can see my powerbook, but not the ibook, I even tried changing the port to 5901 (which is forwarded to the ibook), but it still connected to my powerbook, which is at port 5900, so that doesn't make sense.
Is what I want not possible or am I missing something?

I think this is what you are asking... and according to this Apple article, you can only connect to one NAT computer from a public Internet address.
-jeff
G5 Quad; iBook G4 1.2GHz; TAM Mac OS X (10.4.4)
G5 Quad; iBook G4 1.2GHz; TAM Mac OS X (10.4.4)
G5 Quad; iBook G4 1.2GHz; TAM Mac OS X (10.4.4)

Similar Messages

Multiple clients with same account on a single IMAP server

Hi,
I am connecting to a IMAP server using same account but from 2 different machines. From one machine a mark a message as SEEN=FALSE. But on the second machine, the flag will still be TRUE.
Is there any way to co-ordinate between multiple clients so that all the clients are in sync.
Regards,
Nitin.

I was able to resolve the problem using addMessageCountListener and messagesAdded method, as suggested by you.
I am now facing another problem. Whenever a new message is received, code inside messagesAdded method gets executed. Here I am trying to spawn another thread and do some stuff. But this new thread is not starting at all. It goes into some JavaMail:EventQueue and does nothing. What is the concept of EventQueue here? How can I get this new thread executed?
Also will there be synchronization problems in messagesAdded method. Say I received a message and I am processing it in the messagesAdded method. In the mean time another message comes up. How will this behave.

Connect to network over internet?

Pardon my lack of knowledge; can I connect to my home network over the internet? if so, do I need an IP address? Is there any information that I need from my network?(if so, I may have to wait until i get home). I've searched, but to no avail. Any help would be greatly appreciated.

Also, how do I connect to a MacBook that is on this wireless network?

Multiple people access same form over different sessions?

I am in residential property management. I would like an online form my customers can fill out to give us critical information pertaining to their property (bed/bath/size, etc.) and about their account with us (their contact info, insurance company info, maintenance preferences, etc.). I would like the form to be accessible by the client, and by us over time to make corrections or updates as needed. This is because an owner might not have all info needed for the form the first time the start to fill it out. Also, we need to fill in some information they don't know. Is this possible with Adobe Forms Central?

Hi,
It is possible for a user to fill out the form and save the data and then edit the form data again before they finally submit it. Once the form is submitted, the user cannot edit their previous response any more. But as a form owner, you may fill in more information in the Response table directly.
Thanks,
Wenlan

Multiple clients on same account? Feature request...

Hi,
I suspect many or most users have a phone and a PC of some sort. I have a Mac laptop and a Linux box and an Android phone.
My problem is that I can only have one client signed in at a time. If I'm on (for example) the Mac, then close the lid and run off, I have issues with Skype on the phone. When I come back, I have issues with Skype on the Mac again if I didn't sign off of the phone before opening the lid on the Mac.
I would like some sort of "use this one" button that I can direct all activity to the Skype client in front of me rather than have it go to whatever I just stopped using.
It would also be handy if there were a setting of some sort. What I can think of would be something like this:
1 If the system wakes up and Skype is running, then automatically grab activity.
2 This is my primary client. Use it when not sleeping no matter what.
3 This is a secondary client. Show me what's going on but don't make it active unless I'm actively using it.
Sorry if this has been requested before. It would be amazingly handy.
Thanks.

I was able to resolve the problem using addMessageCountListener and messagesAdded method, as suggested by you.
I am now facing another problem. Whenever a new message is received, code inside messagesAdded method gets executed. Here I am trying to spawn another thread and do some stuff. But this new thread is not starting at all. It goes into some JavaMail:EventQueue and does nothing. What is the concept of EventQueue here? How can I get this new thread executed?
Also will there be synchronization problems in messagesAdded method. Say I received a message and I am processing it in the messagesAdded method. In the mean time another message comes up. How will this behave.

JCos (Java Connectors) from one GRC server to multiple clients on same DEV

I have installed SAP GRC Access Controls RAR on a server.
I have connected the RAR using JCo's to a client (800) on a DEV R/3 (4.7) box. I have also performed analysis succesfully on the roles and users in this DEV client.
I now have another development client on the DEV box (500) which I need to perform analysis for. This client is HR specific.
I know I can create a new JCo to connect to client 500. But what will be the impact on my analysis results? How will I distinguish between the results found from client 500 and those found from client 800?
How would you suggest the best way of doing this?
Many thanks in advance.

You will need to create a second JCO to the second client as JCO's are client specific (username password combinations to log on etc etc)
You distinguish the results in Risk ANalyses by choosing the JCO (system) when you create the reports eg: Client 500, Client 800 or ALL.
It can be very confusing and you have to be careful otherwise you will interpret the results incorrectly.
If your new client is HR specific make sure that you have the HR RTA installed as well and patch the HR and Non-HR RTAs up to the latest versions.

Two EX90 devices can make video calls over Internet with No VCS-C and VCS-E

Dear Experts;
I have just started TelePresence and VCS 2 weeks before by going through cisco docs and videos and I had taken a risk of implementing the infrastructure elements.
We are now implementing Cisco Tele presence with VCS-C, VCS-E TMS,TCS,MCU and End points with Jabber in One setup.
and in another setup CUCM 10.5,UCCX 10.5 IM&P,Jabber with some 10 agents.
Now the question is In our same building in 2nd floor we have one EX90 and in 5th Floor one EX90 and over LAN we can make video calls using IP address.
In the same way is it possible to make a video call between 2 EX90 devices present in different location in the same city over Internet without the involvement of VCS-C and VCS-E.
Appreciate your valuable reply.
Regards
Debashis

The simple answer to that is NO! Where is the EX90 registered to at the moment? Is it on the VCS? or CUCM

Is it possbile to have multiple clients on our Production instance

We have our Production system with client 101
Our abapers want me to create another client 500 (config only - not easy to accomplish) to be used for our Mexican users.
I told them to create another company code for Mexico, but they do not know how to do this.
DO I have any other options, of yes
Pros and cons of having multiple clients in same production instance.
I know that any independent code is going to effect all clients.
THanks
Joe

Hi Jo,
you CAN create a new client, but mostly this is not done, because the effort to maintain multiple clients is mostly higher than just different company codes. Yes, ABAPs are client indpendent and therefore valid for all clients.
So, the argument, to "not know" how to create different company codes is not valid to me !
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

WRT54 G2 Router Can't be accessed over internet

Hi ALL
I am trying to access my WRT54 G2 router using IP address assigned by ISP. But i can't access it. Which means I can access it in my officenetwork using http://192.168.1.1 but can't access from out of the network over internet using ip assigned to it by ISP like http://59.10.28.82
Can some one help why? or what setting do i need to change?
Message Edited by VJV on 20-01-2010 02:46 AM

Check this link to enable Remote Management on the router and to manage your router remotely.

ARD over the internet - one external IP, multiple clients

I have a tricky question (at least it is tricky for me)...
The objective: To connect to a single static external IP over the internet and gain access to the 4 or so ARD client computers that are on the network within.
Currently I connect to the external IP and have configured my router to forward the relevant ports to a single client computer (one internal IP using the relevant port 5900 forwarding as suggesting in the user manual).
My question is, what do I have to do to be able to have access to (and control) more than one of the ARD clients on the network within??
Any help here would be much appreciated!
My thanks in advance.

Setup a VPN or install ARD admin on the one client you have access to and control the other clients from there.
can you explain to me how to set up ARD admin, and access?
I'm trying to use NAT portmapping and some how it's not working.
Thanks,

ARD over internet to multiple macs using the same connection

Hi, I know the topic has been covered to enable ARD over the net, however all the solutions I see require port forwarding which in essence makes only one computer using the internet connection available, how do you make it so multiple macs can use the one internet connection to send/receive ARD requests? is there a way to change the port ARD uses on individual macs and then forward the ports ? or do I have to go down the VPN path ? or is there a better solution for this kind of setup, thanks Ash

Precisely.
Cheers, Joel
\[ Note, the reason I didn't use 5900 and 5901 was for clarity to make it obvious that they are arbitrary choices on the external side, but also because sometimes using 5901+ gets confusing. Depending on your VNC server software, which port on the internal side that you choose to use between 5900-5920 actually means something (resolution, color depth, etc) to the server software. If you can keep it all straight in your head though, and point them all to the right internal port (5900 usually), no harm in it. If you don't mind adding some awful "security through obscurity," you probably shouldn't have VNC service open to the internet on 5900 anyway. Either way, you should also probably limit connections to those internal machines now that they are "directly reachable" from the 'net. In your firewall they should both have default-deny policies for incoming requests unless they're from your known-safe external addresses.]
Message was edited by: Joel D. Reid

WDS 2012 R2 - Cannot PXE multiple clients at the same time

Hello All,
This is my first post on here so I apologize if this is the wrong place. I work for a school district and we are implementing WDS 2012 R2. We've been extremely satisfied with the speeds and ease of use through unattend files. However, for
the past month I've been looking for a possible answer to a problem that has plagued us from day one of implementation.
So here's the problem:
I have a stand alone WDS server which is not a domain controller and is not our DHCP server. I have IP helpers and broadcast forwarders setup on the network. As well as option 66 and 67 in DHCP. So far so good right!
Well that's partially right. When we boot one client at a time to the WDS server. Everything works as intended. We can TFTP the necessary files from the WDS server. Everything boots up and we're off and running.
However, if we boot up two or more clients at the same time. The WDS server never responds to the traffic. The clients get their DHCP information. They start the referral and download from the WDS server, but get no response. I'm
really hoping that someone on here would have some insight of something I can try. I've about exhausted my list of peers and contacts. They're all stumped as well and were smart enough to stay with 2008 WDS.
I would prefer to stick with 2012 R2 since it's setup and working for the most part. With only this one hiccup.
Thanks in advance for any guidance!

Hello Daniel,
I appreciate the reply and apologize for taking so long to get back to this. Things have been a little hectic over here.
I have tried everything on this forum and I am still unsuccessful in PXE booting multiple clients at the same time.
Multicast is enabled on the server, and it works for the clients. However, as stated in the original post. I cannot boot multiple machines at the same time. I can start them from the image selection screen around the same time though. So,
that appears to be working fine.

Can installing Oracle 11g on a client in the same network as another implementation cause problems?

Hi, I have a running Oracle 11g r2 installation running. Same network, different subnet. I want to install 11gR2 for development/testing on another machine not connected in any way to the other system other than they are on the same network (different subnet).
Is there anything that happens over the network that can screw something up? I do not want to interfere with my existing implementation in production.

Multiple installations of Oracle don't react like multiple ex-wives at a will reading
However if you need to access both production and development instances from the same client you probably want to have a different names for each instance e.g. XXXDEV vs. XXXPRD to easily check which instance you are connecting to.

Who can shed some light on my ongoing connection problem. After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet. I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to

Who can shed some light on my ongoing connection problem.
After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
I tried all things of resets and forgets. No result.
I have been fondling with my Airport Extreme 5 , but that did not help much.
This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
Ideas anyone ?

Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden

Multiple versions of Shared Variables on same network

I have 2 seperate reactors working on the same network each deploying ~50 shared variables (different names on each process) communicating with LV 8.5RT running on FP hardware. One of the reactors is requested for new features and to be upgraded. Is it possible to heve 2 different shared variable engines (8.5 and 2010) and versions on the same network and client computer, or am I asking for trouble.
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA
Solved!
Go to Solution.

I believe we address this here: http://forums.ni.com/t5/LabVIEW/multiple-versions-of-Shared-Variables-on-same-network/m-p/1487366#M5...
Sam S
Applications Engineer
National Instruments

Multiple Clients on same network over internet

Similar Messages

Maybe you are looking for