Multiple cold dtart reboot problem may be linked to Audio drivers!

All-
I received my RMAed board (975x PUE) back 2 weeks ago as there was a problem with my board. Re-installed everything...after afinally figuring out that no other drives but the SATA raid volume need to be in for install or raid volume will not be C: Everything was working fine until I loaded my Audigy Gamer sound card drivers, then windows could not start-up normally. I ripped out the card and restored windows to before the indtall. Everything back to working. So then I decided to install the on-board audio driver and bango! Lot's of cold boot and reboot problems. It usually takes 2-3 tried before windows will come up properly. I have downloaded the latest drivers for both MSI and Realtek...problem still remains.
Any ideas?

I have not flashed the bios and it is the on-board sound! Any idea why cold boot and re-start take multiple tries?
Mark

Similar Messages

Waveform chart X-Axis reverses itself when upper limit is edited in Absolute Time - problem may be linked to Timestamp Control?

I've seen this problem for some time now, and it still exists in the Silver toolset Waveform Chart in LV 2012. If the chart is in strip mode, and you edit the upper limit value to a point in the future, the X-Axis will invert (higher values/ later time to the left), to the limit of the Chart History length. This happens whether the chart is active (logging data on a compiled executable) or even when in design mode, though it's more consistent when there's data in the chart. It's not history length related as far as I can tell, as I set the length to 7 days of sampling @ 1-second intervals (605K), and it happens when I try to set the end time to an hour in the future with only a few minutes of data collected - suddenly the right Absolute Time becomes the time my last sample point was collected, while the left Absolute Time becomes nearly 7 days in the future (so neither end point is what I was setting it to).
It's nice that the chart gives the option of editing the limits, but as such, it's important that they work as you would expect them to.
Also - until this is addressed, is there a way to lock it against editing? Until a fix is made, my workaround is to put a transparent button over the range start & end points, and a transparent flat rectangle above all other mid-range points, and pop-up a data entry form with a Timestamp control to allow editing. Unfortunately, this doesn't work as I would expect, as typing "11 AM" in the Timestamp control over a prior value of say "10:05:34.232 AM" ends up becoming "11:05:34.232 AM" instead. ??? Another error - or is this by design? If it's by design, is there an option to make it behave as I would prefer (11 AM = 11:00:00.000 AM), as Excel behaves with timestamps? I can't help but suspect this may be linked to the chart axis issue.
Also - I just built a simplified chart modeled somewhat on my current project, and could not get this to recur. BUT... had the strangest thing happen: My sample data was generated using the Trig functions for Sine and Cosine, and at one point my waveforms distorted on the display, so I'm attaching that here plus the simplified chart project.
Last - my system is LV 2012 on Win7 Pro-x64.
Thanks!
Erik
Attachments:
Chart data distorted.png ‏45 KB
Waveform Chart Flaw.zip ‏17 KB

I am not so sure that this is a bug, and I have not been able to reproduce this behavior that you are describing.
But you can lock it from editing by right-clicking on the graph and go to Properties>>Appearance>>Enabled State --> Disabled
Also, word of advice for the future: You will get more replies from the community with shorter posts and keeping it to one question per post. Summarize what the issue is, and put the detailed documentation and instructions to reproduce in the actual VI.
Huntington W
National Instruments
Applications Engineer
***Don't forget to give Kudos and Accepted as Solution where it is deserved***

WinXP reboot problem

Hey... when I've installed Windows XP and choose to run it in the os meny, the computer just reboots. I've tried different versions of XP still same problem. Safe mode or command prompt doesn't work either.
The thing is, I have tried to install XP many times now and I've had different error messages but I have always been able to boot XP. Now, without a reason, the computer just reboots! Very strange.

Hardware:
Athlon 64 3000+
MSI K8T NEO-FIS2R
TwinMOS PC3200 DDR-DIMM 512 MB m/Winbond (400 MHz)
Maxtor DiamondMax Plus 9 160GB S-ATA - S-ATA/150 8MB cache
PowerColor Radeon 9660 256 MB DDR
CNet PCI Fast Ethernet Adapter (didn't know the motherboard had integrated network card :s)
I'm pretty sure it's my HD that messes up the system.
Drivers:
VIA Serial ATA RAID Controller
VIA ATA/ATAPI Host Controller
Promise FastTrak 376/378 (tm) Controller
Promise SATA-150 TX Series (tm) Controller
Okey... first I had a problem with a bluescreen when trying to install XP. This was fixed by disabling the external cache and shadowing in BIOS. I'm running ME as my primary and active partition, having XP to test on the other partition as logical. Tried to set it to active but the meny where you would choose OS didn't appear. But I'm still saying that I've been able to run XP before on that partition...
1. I started with loading all the drivers with F6. Then when the installation run there were 2 pop-up error messages about something that the VIA SATA drivers didn't support XP... not sure what it stood but I clicked continue. So when I run XP and installed the drivers and tried to update with Windows Update, a message appeared on the screen telling me to shut down all work because the computer is going to restart in 60 seconds. I guess it has something to do with the error messages earlier when I installed. So the message kept coming up every time I booted up XP and there was no way of canceling it. I realised I shouldn't load both drivers (stupid me), I thought both were needed to get rid of the "can't find HD screen", but then I read on this forum that you should load either VIA or Promise...
2. I tried to load the VIA drivers, but then a bluescreen appeared so the VIA drivers were not an option.
3. Then I tried the Promise drivers, and it worked. No error messages during installation either. But then after the installation, all of a sudden, when I choosed to boot XP, the computer just rebooted!
4. I tried to install another time loading all the drivers. Now, the error messages didn't appear (they should had!) BUT the computer reboots when I choose XP... and now I can't even get XP to boot I don't know what the h*ll happened!
I'm sure if I could get rid of the reboot problem I could try install Promise drivers again and check if it would work correctly. Running BIOS 1.20 update. And I have tried to get XP to work in 2 weeks now and reinstalled XP over and over again, deleeting the partition and then creating new NTFS with quickformat. I'm getting tired of this as my ME partition can't run any games because the latest graphic card drivers doesn't support ME... If I just had choosen to have the OS installed (like an 120$ extra) when I ordered the computer I wouldn't have all those problems... but then I know it is POSSIBLE to get XP to work or else they wouldn't have the installation option when ordering!!
This is as much info as I can give you... hope it helps.

I have been unable to publish my website due to this message "iweb quit unexpectedly - the problem may have been caused by FTP plug-in" - Iweb seems to register all pages, then crashes before publishing.Tried quite few thread trouble shoots, no luck.Help?

I have mac book pro 10.5 Leopard
Have just started using iweb and have small site of about 5 pages, plus blog. I have yet been able to publish, each time I try iweb crashes and receive following note -
The application iweb quite unexpectedly. The problem may have been caused by the FTPKit Plug-in.
I have tried a few troubleshooting methods recomended on other threads, ie. deleting caches, copying domain and reboots... but no luck.
Any help very much appreciated.

Reinstall iWeb from the source you got it from originallhy. Or, if you're running iWeb 3 download and apply or reapply the iWeb 3.0.4 updater. It included that plugin.
OT

Backup Failed - The Problem may be temporary

I startet getting the following error message tonight:
"The backup was not performed because an error occurred while copying files to the backup disk. The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk."
The Time Machine drive is a 2TB Hitachi, connected via an eSATA 6G PCIe 2.0 Max Power controller card.
Time Machine has been making successful backups for weeks.
Steps taken so far:
Repair disk with disk utility (no repair needed)
Confirm that Spotlight was not indexing disk.
Restart computer.
Here is the log from Time Machine Buddy
Starting standard backup
Backing up to: /Volumes/OWC Mercury Elite AL Pro/Backups.backupdb
No pre-backup thinning needed: 2.40 GB requested (including padding), 1.41 TB available
Error: (-36) SrcErr:NO Copying /Applications/Vienna Ensemble/Vienna Ensemble Service (64-bit).app/Contents/MacOS/Vienna Ensemble to /Volumes/OWC Mercury Elite AL Pro/Backups.backupdb/Michael Matthews’s Mac Pro/2010-11-25-201135.inProgress/7475F4FC-BCAC-4F42-A860-64715C66E408/Macintosh HD/Applications/Vienna Ensemble/Vienna Ensemble Service (64-bit).app/Contents/MacOS
Error: (-36) SrcErr:NO Copying /Applications/Vienna Ensemble/Vienna Ensemble Service (64-bit).app/Contents/PkgInfo to /Volumes/OWC Mercury Elite AL Pro/Backups.backupdb/Michael Matthews’s Mac Pro/2010-11-25-201135.inProgress/7475F4FC-BCAC-4F42-A860-64715C66E408/Macintosh HD/Applications/Vienna Ensemble/Vienna Ensemble Service (64-bit).app/Contents
Error: (-36) SrcErr:NO Copying /Applications/Vienna Ensemble/Vienna Ensemble Service (64-bit).app/Contents/Resources/empty.lproj to /Volumes/OWC Mercury Elite AL Pro/Backups.backupdb/Michael Matthews’s Mac Pro/2010-11-25-201135.inProgress/7475F4FC-BCAC-4F42-A860-64715C66E408/Macintosh HD/Applications/Vienna Ensemble/Vienna Ensemble Service (64-bit).app/Contents/Resources
Error: (-36) SrcErr:NO Copying /Applications/Vienna Ensemble/Vienna Ensemble Service (64-bit).app/Contents/Resources/qt.conf to /Volumes/OWC Mercury Elite AL Pro/Backups.backupdb/Michael Matthews’s Mac Pro/2010-11-25-201135.inProgress/7475F4FC-BCAC-4F42-A860-64715C66E408/Macintosh HD/Applications/Vienna Ensemble/Vienna Ensemble Service (64-bit).app/Contents/Resources
Error: (-36) SrcErr:NO Copying /Applications/Vienna Ensemble/Vienna Ensemble Service (64-bit).app/Contents/Resources/viframe.icns to /Volumes/OWC Mercury Elite AL Pro/Backups.backupdb/Michael Matthews’s Mac Pro/2010-11-25-201135.inProgress/7475F4FC-BCAC-4F42-A860-64715C66E408/Macintosh HD/Applications/Vienna Ensemble/Vienna Ensemble Service (64-bit).app/Contents/Resources
Error: (-36) SrcErr:NO Copying /Applications/Vienna Ensemble/Vienna Ensemble Service (64-bit).app/Contents/Resources/vslensemble_icon.icns to /Volumes/OWC Mercury Elite AL Pro/Backups.backupdb/Michael Matthews’s Mac Pro/2010-11-25-201135.inProgress/7475F4FC-BCAC-4F42-A860-64715C66E408/Macintosh HD/Applications/Vienna Ensemble/Vienna Ensemble Service (64-bit).app/Contents/Resources
Error: (-36) SrcErr:NO Copying /Applications/Vienna Ensemble/Vienna Ensemble Service.app/Contents/MacOS/Vienna Ensemble to /Volumes/OWC Mercury Elite AL Pro/Backups.backupdb/Michael Matthews’s Mac Pro/2010-11-25-201135.inProgress/7475F4FC-BCAC-4F42-A860-64715C66E408/Macintosh HD/Applications/Vienna Ensemble/Vienna Ensemble Service.app/Contents/MacOS
Error: (-36) SrcErr:NO Copying /Applications/Vienna Ensemble/Vienna Ensemble Service.app/Contents/PkgInfo to /Volumes/OWC Mercury Elite AL Pro/Backups.backupdb/Michael Matthews’s Mac Pro/2010-11-25-201135.inProgress/7475F4FC-BCAC-4F42-A860-64715C66E408/Macintosh HD/Applications/Vienna Ensemble/Vienna Ensemble Service.app/Contents
Error: (-36) SrcErr:NO Copying /Applications/Vienna Ensemble/Vienna Ensemble Service.app/Contents/Resources/empty.lproj to /Volumes/OWC Mercury Elite AL Pro/Backups.backupdb/Michael Matthews
Any help would be appreciated.
Michael

michaelmatthews wrote:
The Time Machine drive is a 2TB Hitachi, connected via an eSATA 6G PCIe 2.0 Max Power controller card.
Time Machine backups to an external eSata drive are not supported.
See [Disks that can be used with Time Machine|http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html].
Error: (-36) SrcErr:NO Copying /Applications/Vienna Ensemble/Vienna Ensemble Service (64-bit).app/Contents/MacOS/Vienna Ensemble
All the errors relate to that app. It may be corrupted, or there may be other problems.
See #C3 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum). There are a couple of things there you haven't tried yet. I'd start by just excluding that app.
But it sounds like the eSata connection may be the problem.
Do you have a USB or FireWire disk you can try instead, or connect the drive via USB or FireWire? That may rule some things in or out.

Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it

Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it.
This happens only when a load my pdf file on my server, because if i click on the link when the file is on my iPad, the page opens without problem.
Any help please?
thanx

the % sign is often used when there's a space in a name. HTML doesn't like spaces so it fills them with % or %20
try, on the end of that link, see if there's a space built into the page or the link when the page was made
On the web address you may be able to 'backspace' at the end and erase that space to get the address, but whomever made the page possibly put a mistake in the link

Problem clearing visited links

I am having a problem with clearing visited links in Win 7 / Firefox 11.o
I can clear visited links '''''except for one site''''':
Silicon Investor:
http://www.siliconinvestor.com/home.aspx
I go to:
* Tools
* Clear recent history
* Time Range to clear: Everything
* Clear Browsing and Download History
* Clear Cache
* Clear Active Logins
* Clear Offline Website Data
Again, the only site that will '''not''' clear is Silicon Investor.
Thanks for your help!
PS: On '''Silicon Investor''' site, the '''''History''''' clears, but the '''''Visited Links''''' do '''NOT''' clear.

Yes, I am reloading the page and nothing changes.
Also, several times I have reloaded the page and then shut down my PC and restarted. Nothing seems to clear the visited links.
I tend to think the problem may be at Silicon Investor - maybe some incompatibility with Firefox 11.0 ?
Thanks
PS: I have done some more experimenting and discovered the following:
1. If I am '''logged in''' to the Silicon Investor site I can clear history, but I am unable to clear the visited links.
2. If I am '''''NOT''''' logged into the Silicon Investor site I can clear history, '''''AND''''' clear the visited links with no problem at all.
So, I am thinking that there IS some incompatibility that occurs ONLY when logged in.
Strange!

Repeated problem of broken link and unused files

Hi ,
I am using RH8.0.2
I have updated my RH8 to RH8.0.2 and then fix all broken link and did what was advised.i got result, everything was fine, I was a happy man. Today when i open the same project for updation, i found again plenty of broken links and unused file in the same project.
Is there any permanent solution of the problem of broken links and unused file or i have to fix it every time when i open my project?
Plz help!!!
Br,
Rahul

Hi Rahul.
Two things. Firstly some of the paths you have in your project are very long. In the example you have given we are seeing less than half the path. This may not be the problem but it maybe in the future. Secondly, as Peter has suggested, the problem maybe related to source control. Do you use it? I have heard of instances where (e.g. .FPJ) files cause issues.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter

Firefox will not open unless i reboot and the "send Link" option no longer works

after firefox is opened it works fine for awhile and then when i close the browser the desktop icon is unresponsive to o pen again unless i reboot. also, the "send Link" option, that always worked before, now does not.

I had tried this before, but went ahead and tried this again.
I clicked on "reset Firefox". Firefox closed, but did not come back up. When I tried to open it again, I did receive a message that said Firefox is running but is not responding, that I couldn't open another window without stopping the processes on the other page.
I never got a window that showed me the information that was imported, or a place to click finish.
Since I don't believe this completed, I don't believe my problem will be solved.
Debra

Envy phoenix 810-209 rebooting problem

I've got a rebooting problem.
everytime unplug my computer and plug in,turn it on,then exactly 10 minuites after,my computer has rebooting automatically once.
and i keep using,then no more rebooting happened.
But i turn it off,unplug it,plug in,turn it on,then it happen again exactly 10 minuite after.
Please help me.....

Hi,
That is a tough one to diagnose.
Do you have your PC set to display bluescreen error messages?
Open Control Panel, System, Advanced System Settings.
Open Startup and Recovery.
Uncheck Automatically Restart.
Click OK.
You should be able to see any error codes when this happens again if the computer is blue screening.
That should not happen under any circumstance. But if I am following what is happening, and your PC only does this after you turn it off and remove/restore AC current, why are you repeating this action?
Does your PC work correctly, including rebooting and cold boots, if you don't unplug from the household power supply?
Jaco
Errare humanum est.

I m having ipad 4 and after upgrading to ios7 I m facing continuously rebooting problem while switching between apps can any buddy help or facing same problem

I m having ipad 4 and after upgrading to ios7 I m facing continuously rebooting problem while switching between apps can any buddy help or facing same problem

Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..

KT4 Ultra crashing/rebooting problems

Hi all, I've been having computer crashing/rebooting problems when I play 3d games since I got this board. It can happen between 1-40 minutes during a game session and when the computer crashes, the screen would garble up and reboot along with the garbled screen until I cold boot it. I thought it was a heat problem at first but the cpu heat displays at between 34C-39C. Also, when I tried switching out the video card with an older one, the computer works fine during gameplay, and my newer video card ran fine on a friend's computer. Does anyone know of a way to fix this?
System specs are:
Motherboard: MSI KT4 Ultra
CPU: AMD AthlonXP 2400
Power: 300watt
Ram: PC 2700 333mhz DDR 256MB
Video: Gainward Geforce4 Ti4200 Power Pack Plus! Ultra 650 64MB
Sound: Onboard
Thanks

by the sound of it try a bigger psu,antec enermax over 400 watts
make sure fan on cards not loose

Reboot problem when OC the 975X Power Up

I don't want to break any OC record, only want to reach 3 Ghz, but without rebooting problems. Is there a BIOS version that fixed this problem ???. I am currently using the latest (7.3A), and despite now I can set the memory in 1:1 mode (with 7.2 I can't), when I set the FSB to 333 the reboot problem arise. In fact the reboot problem occurs when I set the FSB higher than 310-315 mhz. At 3 Ghz the board is rock solid and run all test, and even the memory at 667 mhz perform equal than 777 mhz (310 * 2 * 1.25). I have to note that the voltages are all stock, and C1E and speedstep are enabled (at 2.8 Ghz works great), do you have any suggestion with this items ??

Quote from: DragonFury on 06-January-07, 22:50:44
memory compatability . i tried 3 different sets of memory ranging from 533 - 800 mhz ( what the board supports ) the samsung 533 5,5,5,15 reboot issues , Ocz 667 5,5,5,15 no reboot issues up to 400 fsb ( its when i break 400 + is when i need to safe mode the bios ) but this is memory getting pushed to hard . and crucial 800 4,4,4,12 reboot issue but the mb remembers my fsb beyond 400 + fsb ( no safe moding the bios on a shut down ) but because of the compatability issue with the crucial i cant break 400 fsb because it wont hold it . the ocz i can do 430 easily . again here we are . is it mb manu , chip set manu , or mem ? me i am goin towards Memory manufacturers because it is there job to make sure there chips work on multiple platforms and keep up with the times . the only thing we can do too help is contact the memory manufacturers tell them our problems rma our current memory and hope they listen to us .... again ITS NOT MSI fault that memory wasnt cut for a peticular chipset they use .
After reading at many forums it seems to me that the memory problems with 975x/965 chipsets are widespread across all motherboard makers. I don't know if the AMD platform is having many problems with high perfomance DDR2 memory, but at the intel side is a nightmare, and I believe is worst with the 975x than 965.
What model is your OCZ memory ??, Value Pro or Gold ??, if Value Pro, has the copper heatspreader or XTC heatspreader ?? (as mine and not even OCZ support can identify...). I am very curious because with it you don't have the reboot problem, and I do have >:(

Interactive report performance problem over database link - Oracle Gateway

Hello all;
This is regarding a thread Interactive report performance problem over database link that was posted by Samo.
The issue that I am facing is when I use Oracle function like (apex_item.check_box) the query slow down by 45 seconds.
query like this: (due to sensitivity issue, I can not disclose real table name)
SELECT apex_item.checkbox(1,b.col3)
, a.col1
, a.col2
FROM table_one a
, table_two b
WHERE a.col3 = 12345
AND a.col4 = 100
AND b.col5 = a.col5
table_one and table_two are remote tables (non-oracle) which are connected using Oracle Gateway.
Now if I run above queries without apex_item.checkbox function the query return or response is less than a second but if I have apex_item.checkbox then the query run more than 30 seconds. I have resolved the issues by creating a collection but it’s not a good practice.
I would like to get ideas from people how to resolve or speed-up the query?
Any idea how to use sub-factoring for the above scenario? Or others method (creating view or materialized view are not an option).
Thank you.
Shaun S.

Hi Shaun
Okay, I have a million questions (could you tell me if both tables are from the same remote source, it looks like they're possibly not?), but let's just try some things first.
By now you should understand the idea of what I termed 'sub-factoring' in a previous post. This is to do with using the WITH blah AS (SELECT... syntax. Now in most circumstances this 'materialises' the results of the inner select statement. This means that we 'get' the results then do something with them afterwards. It's a handy trick when dealing with remote sites as sometimes you want the remote database to do the work. The reason that I ask you to use the MATERIALIZE hint for testing is just to force this, in 99.99% of cases this can be removed later. Using the WITH statement is also handled differently to inline view like SELECT * FROM (SELECT... but the same result can be mimicked with a NO_MERGE hint.
Looking at your case I would be interested to see what the explain plan and results would be for something like the following two statements (sorry - you're going have to check them, it's late!)
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two),
sourceqry AS
(SELECT b.col3 x
       , a.col1 y
       , a.col2 z
FROM table_one a
    , table_two b
WHERE a.col3 = 12345
AND   a.col4 = 100
AND   b.col5 = a.col5)
SELECT apex_item.checkbox(1,x), y , z
FROM sourceqry
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two)
SELECT apex_item.checkbox(1,x), y , z
FROM table_one a
    , table_two b
WHERE a.col3 = 12345
AND   a.col4 = 100
AND   b.col5 = a.col5If the remote tables are at the same site, then you should have the same results. If they aren't you should get the same results but different to the original query.
We aren't being told the real cardinality of the inners select here so the explain plan is distorted (this is normal for queries on remote and especially non-oracle sites). This hinders tuning normally but I don't think this is your problem at all. How many distinct values do you normally get of the column aliased 'x' and how many rows are normally returned in total? Also how are you testing response times, in APEX, SQL Developer, Toad SQLplus etc?
Sorry for all the questions but it helps to answer the question, if I can.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)

Itunes won't open and i am getting this error message: the application itunes quit unexpectedly. the problem may have been caused by the libgnsdk_dsp.1.9.5.dylib plug in

Have not changed any settings on my mac. Quit the application end of the day. The next day I went to start it and it won't open. Everytime I try to launch it, it won't open and I get this error message: The application itunes quit unexpectedly. The problem may have been caused by the libgnsdk_dsp.1.9.5.dylib plug in

Have not changed any settings on my mac. Quit the application end of the day. The next day I went to start it and it won't open. Everytime I try to launch it, it won't open and I get this error message: The application itunes quit unexpectedly. The problem may have been caused by the libgnsdk_dsp.1.9.5.dylib plug in

Multiple cold dtart reboot problem may be linked to Audio drivers!

Similar Messages

Maybe you are looking for