Multiple Colourful barcodes not restarting and repeted 3 beeps

Im having multiple Colourful barcodes appearing across screen, i shut down my macbook pro 13" late 2012, once shutdown it will not restart and is beeping 3 times repetadly please help if you have any ideas, I wasnt touching it at the time and only had pages running

Mac computers can produce several sounds when starting up. Your Mac should produce the familiar single tone on start up. If you hear another tone it can indicate problems with your computer.
• 3 successive tones, a 5 second pause (repeating): This indicates RAM does not pass a data integrity check
http://support.apple.com/kb/HT5860?viewlocale=en_US

Similar Messages

I have put mac os update from 10.9 to 10.9.5 from mac app store but system do not restart and monitor shows no signal?

Hi All
I have put mac os update from 10.9 to 10.9.5 from mac app store. Update wants restart and I do that. First it shows installing updates on monitor and then after waiting for more than 30 minutes, it did not restart. On monitor it shows no signal now. I have checked all the connections. Mac mini LED light is showing blue color and i think its signalled the ON mode. Also mouse lights are on. Please provide help, as I need to solve it asap.
Thanks

Boot to recovery and first try repairing the startup disk via dis utility.
Next reinstall the OS via Recovery
OS X: About OS X Recovery

The update to osx 10.8.2 has not taken effect, showed it downloading but did not restart and why is the update still available?

the update to osx 10.8.2 has not taken effect? it showed it downloading the update in the app browser but did not restart of its own accord or take me to the grey screen it describes. after restarting myself it still says the upgrade is still available? and iphoto does not work as it needs 10.8.2 to work!
what am i not doing right? this could well be me being thick. so any help would be much appreciated.

Welcome to the Apple Support Communities
Download OS X 10.8.2 > http://support.apple.com/kb/DL1581 Finally, install that and go to  > Software Update to install 10.8.2 Supplemental

Xperia Z1 keeps shutting down does not restarts,and automatically stops and starts charging randomly

My Sony Xperia Z1 keeps shutting down due to high temperature even though its not overheated, or i am not running any app. It does not restarts even after i give it some time to cool down as it soon again displays the same messege (SHUTTING DOWN DUE TO HIGH TEMPERATURE), then when i connect a charger it automatically starts charging and discharging (even though if the charger is connected and ON) the cell phone
I request you to kindly look into the matter, expedite the situation and suggest me any possible solution asap
also i would request you to not to release any OS updates unless they are fully stable and functional, i have bought this device 6 months back and it has already malfunctioned 3 times which is a serious concern. I cannot keep on updating and repairing my cell phone after every month or so which i feel is very irritating.
Please stop treating these devices as developers guinea pigs

I suggest that you try to repair the phone software using PC Companion..
Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
How to backup?
If the issue should still remain I think that this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, contact your local support team.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Colour corrections not saving and not exporting

Am puzzled by something in FCE. I did a whole load of colour corrections, then saved and closed the project. Whenever I re-open the project, all the colour corrections are un-done. All other edits are unaffected. This happens repeatedly.
Also, after re-doing the colour corrections, saving and NOT closing, I exported the project to MPEG2. The colour corrections did not come through on the exported file.
My timeline is 3.5hrs long, and re-doing all these colour corrections is *time consuming*.
Please does anyone have any ideas what I'm doing wrong?
Any help appreciated.
iMac Mac OS X (10.4)

No.
If you have created some modified effects (eg. 3 second dissolve) and put them into your FCE Favoutites Bin, trashing the preferences will trash these. They can easily be re-created or save this Bin somewhere else and bring it back if that's the course of least resistance.
Al

IPhone 4 freezes and will not restart or restore using iTunes.

iPhone 4 freezes and will not restart and cannot be restored using iTunes (unknown error 1602). My daughter's iPhone 4 did the same thing 10 days ago. Is this a software glitch? I replaced her phone, but I'm ready to switch to Android.

I am using Sophos Antivirus, but after disabling, still no luck. Tried the other USB port; no luck (same 1602 error). I'll take it to the Apple store tomorrow, but if they recommend replacing the phone I'm switching.
I went through this ~15 years ago when the Apple OS got so buggy and unstable that I had to abandon PowerBooks and switch to Windows. Oddly enough, this was after Jobs left the first time. I hope history isn't repeating itself.
Thank you for the suggestions.

XML Validation in PI 7.1 - Restart and skip validation possible, but how?

Hello all,
I read about schema validation in PI 7.1 and did a few tests on my own, but could not restart and skip validation for invalid payloaded messages. The documents say it is possible.
Anyone know how? Thanks.
BTW, I really think putting the schemas in server file system will cause a lot of authorization trouble in enterprises. No one gives access to the server filesystem and I don't think they will also like to open the required subdirectories for share. Asking the basis team to create the folder structures and maintaining schemas would be another pain. Don't you also think that SAP could find a better approach, like automatically uploading the schemas to the filesystem, or validating them from repository directly if possible?
Kind regards,
Gökhan

Hi Gökhan,
I am facing the same issue.
I set up outbound xml validation in receiver agreement and tested it with valid and invalid messages.
The validation works fine.
But in case of validation error I tried to restart with skipping the validation. But this wasn't possible.
I am always facing the same valdiation error.
I already tried all different tools I know (sxi_monitor, message monitoring in rwb and in nwa)
I am working on PI 7.11 SP6
Did you find a solution for skipping the validation for a single message out of the monitoring?
I know that there is the possibility of deactivate the validation in receiver agreement but thid doesn't meet the requirement of skip the validation only for a single message.
Maybe anyone else faced and solved this issue already.
Thanks in advance
Jochen

HP Touchpad will not restart

As the title says, it will not restart and Im very frustrated. It worked all day, I had about a fourth of the battery left. I was looking online on the touchpad and it froze. I did a force restart and it shut down and now will not get past the loading screen with the HP logo. It would only turn back on to that part when plugged the charger in and it sat on that screen for almost 2 hours. Now the touchpad and the charger is hot and I have no idea what to do now. I have researched the whole time and can find no real answers. Please someone help asap. Thanks in advance
This question was solved.
View Solution.

Unfortunately, HP ended support for the entire line of webOS devices quite a while ago.
There are several other threads already discussing this topic, but they all say the same things:
--Check your charger. Many of the USB cables supplied by HP were fragile, and break easily. Try another micro-USB cable with a charger that supplies 2 amps (2,000mA). If using an HP charger, check the prongs on the transformer - they are removable, and if twisted out of position no current will flow.
--Try all the resets - simple (hold both the power and center button for 15 - 20 seconds until the HP logo appears). Advanced (press and hold the power, center, and volume down together until logo appears. May give the option to completely erase the unit!)
--Use a TouchStone to charge the device if you suspect the female charging port on the TouchPad has been damaged.
--As a last resort, try using the tpdebrick-v004 program. This is a difficult, but doable re-flash of the device using a computer running Ubuntu, and a program from this link.
http://rootzwiki.com/topic/38786-tpdebrick-v004/
I revived one of my touchpads using this method.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

MBA not starting and locked in

Hi all, I am new here and hope can get some support. My MBA does not restart and stays locked in onto the light grey page with the apple logo and rotating sun. I have run fsck_hfs -r /drive/disk0s2 to fix the structure (there were issues noted) and running fsck -fy tells me everything seems OK. However, no improvement at all.
Any good advise to continue the fixing and get it started?
Thanks alot.

Mac OS X 10.4, 10.5: Gray screen appears during startup
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

Why do I get a popup message in multiple languages requiring a shutdown and restart

Why do I keep getting a popup message in multiple languages requiring a shutdown and restart? Has been going on for a few months. Because of the shutdown reports have been sent to Apple upon restart.

After it restarted, did you see a dialog box resembling this one:
If so, next time it occurs click Report...
Before you send it to Apple, copy the text of the report. Paste it in a reply. Remove or obscure any personal information, should it appear.
If problems continues to occur please determine if they also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.

TS3899 I just installed the latest software update on my iPhone this weekend (9/22/12), and now I can't get email. I've restarted and closed all my apps to no avail. I'm able to get email on my laptop, so it's not a problem with my provider. Any ideas?

I just installed the latest software update on my iPhone this weekend (9/22/12), and now I can't get email. I've restarted and closed all my apps to no avail. I'm able to get email on my laptop, so it's not a problem with my provider. Any ideas?

Originally we were getting the error that the phone could not connect. Then, after deleting the account multiple times and re-adding it again, the error message CHANGED to having to log in to Yahoo and authorize.
When we went to Yahoo in a regular browser and logged in there was an alert telling us about connection attempts so it disabled mobile/iphone connectivity. It required that we change our password FIRST.
Then, we went in to Manage Apps and Webpages and saw that iPhone was not there but Facebook was.
After all of this went back to the phone and deleted then re-added the account again and SUCCESS!
It now also shows up on the Yahoo Manage Apps and Webpages.
Hope this helps someone else. Please consider giving me points if it does or like the post.
Fred

PowerBook G4 keeps freezing and not restarting sometimes for hours

I just bought a used G4 and wiped the hard drive clean and reinstalled OS X10.4. It suddenly started freezing on me(seems to have been when music started either in iTunes or on a webpage) and so I force quit and when I went to restart it didn't do anything. The caplocks button responded so I knew that there was power. But no fan, no hard drive sound, nothing. When I went to a "genius" to figure out what was up, I pressed the on button and it started. Then when I got home it shut down twice and one other time a bunch of vertical lines covered the screen and it beeped.
I have done everything from removing the battery(which is full and charges fine)to reinstalling the OS, to verifying the disk and repairing the disk. It hasn't done it since yesterday but it makes me nervous. The previous owner bought a new one because the same thing happened to him and when he brought it to Mac911 they said there was nothing wrong with it.
Does anyone know of anything I can do to fix this? Or if I'm just setting myself up for disaster by keeping this system?(I can still return it but I really need it.)
Thank you in advance for any help that you may offer.

Update: Since I had noticed that the iBook booted up more or less normally when cold, I got to the genius bar 40 minutes early and let my computer get good and warm so it would slow down and freeze, which it did. I didn't get a definitive answer from the genius because my computer got so bogged down that he couldn't do much of anything with it. He said to do an erase and install, and if it was still acting the same, it was likely to be a hardware problem and I would need to send it off to Apple for diagnosis and repair.
When I got home, I discovered that I had a disc with Tech Tool Pro which came in my original Applecare package. I decided to run it, and everything passed except that the Surface Scan reported "Failed: Error=-4". I'm not sure just what that means.
Anyway, it might be that your computer was cold when the geniuses looked at it and that's why they didn't find anything wrong.
I actually stuck my computer in the fridge for 20 minutes and then set it on an aluminum plate to help cool it. So far it's been working for about an hour and a half instead of the usual 20 minutes or so, but it's still slow and I get the spinning beach ball more and more. I plan to try an erase and install tomorrow, but I actually don't expect that to fix it since it seems to be temperature related.
If I find out anything more, I'll post back.

MSI P67A-G43 (MS-7673) System Freezes and then will NOT Restart

Hello Everyone,
I was hoping someone out there might know what is going on with my system. My issue began about a week ago when my computer simply froze while in use. After realizing the system was not responding I hit the reset button and tried to restart, however the computer restarted to a black screen (NO words) and went no further. I turned off the power supply to force a shut down, turned it back on and then tried to restart again, only this time the computer went into a cycle where the lights flash, the fans run for 2-3 seconds, but the “all clear” beeps never sound and then everything turns off. The only way to stop the cycle is to cut the power. Because this cycle happened when I first built the computer (as a result of an improperly connected cable) I thought something inside the case might be lose, so I opened it up, removed everything and then put it back together.
This time when I started the system I got a screen that said “Previous overclocking has failed…” Now I have never tried to overclock my computer, nor do I know how, so I do not understand WHY my computer would give such a message. After this message however, the computer did actually restart and take me to windows, however the computer inevitably freezes again after use, sometimes after only a few seconds, sometimes after a few hours.
Furthermore, once I shut down the computer and try to restart it, it almost always goes into the cycle of trying to restart, but failing. When it does get past the ‘all clear’ beeps I get the failed overclocking message again. I did just discover a “super-charger.exe” MSI application that was trying to run every time I started the computer and I uninstalled the application, I’m not sure if that had something to do with the overclocking or not. I also took out 3 of the 4 memory sticks and I am running on just 1. For the moment (while I write this post) the computer is working but could very well freeze again at any time, though just now it did start up withOUT the overclocking message and went right to windows.
Thanks for taking the time to read through my problem. This issue has been going on for more then a week, ANY help would be VERY much appreciated!

If it is fine with one stick RAM, add the second so that both blue slots are used. If ok, then remove the second stick & replace it with one of the other sticks. If ok, try the last stick. If any of the tests fail with any of the sticks in the second slot, you found the bad one.

Every time I try to open Firefox I get a popup saying it is already open, and to close it or restart; but it is NOT open, and restarting doesn't help.

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/880054]]</blockquote>
Question
Every time I try to open Firefox I get a popup saying it is already open, and to close it or restart; but it is NOT open, and restarting doesn't he

Duplicate Thread LOCK please
* Continue here - https://support.mozilla.com/en-US/questions/880054

I just created a new profile/user on my MacBook Pro. My pointer/mouse. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. Mouse moves but will not click. Already tried restarting and the pram zap.

I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly. Should I just delete the new profile and try again?

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

Multiple Colourful barcodes not restarting and repeted 3 beeps

Similar Messages

Maybe you are looking for