Multiple columns on same page?

I'm looking for a way to have a two column page layout, with three columns each that flows from page 1 column 1, to page 1 column 2, then to page 2 column 1 to page 2 column 2, etc. It's for a karaoke list and the columns are Song, Artist, and Song #, and I want to save paper by having two columns per page.
In Excel I have to copy the spreadsheet into a two column word document, and it really slows down. An example of my layout is here... http://karaoke.seanphafer.com/page4/files/KaraokeUpdates27Dec06.pdf

I'd almost do a Word "Mail Merge" from Excel. I've done program fliers this way and only takes a few seconds to do the merge (1000s of items.) Not quite a Numbers solution...
Regards,

Similar Messages

Cross-Tab in multiple columns on same page rather than on multiple pages

I have a report that shows temperature readings and the date/time of the reading in a cross tab as a part of a report. The amount of readings causes the cross-tab to take up multiple pages. What I would like to do is set the cross tab to appear three or four times on the same page before going to the next page to reduce the number of pages in my report. Any ideas on how I can do this?
This is what I have:
Page 1:
Date/Time1 | Temp1
Date/Time2 | Temp2
Date/Time3 | Temp3
Date/Time4 | Temp4
Page 2:
Date/Time5 | Temp5
Date/Time6 | Temp6
Date/Time7 | Temp7
Date/Time8 | Temp8
What I want is:
Page 1
Date/Time1 | Temp1..............Date/Time5 | Temp5..............Date/Time9   | Temp9
Date/Time2 | Temp2..............Date/Time6 | Temp6..............Date/Time10 | Temp10
Date/Time3 | Temp3..............Date/Time7 | Temp7..............Date/Time11 | Temp11
Date/Time4 | Temp4..............Date/Time8 | Temp8..............Date/Time12 | Temp12
Page 2
Date/Time13 | Temp17............Date/Time21 | Temp21............Date/Time25 | Temp25
Date/Time14 | Temp18............Date/Time22 | Temp22............Date/Time26 | Temp26
Date/Time15 | Temp19............Date/Time23 | Temp23............Date/Time27 | Temp27
Date/Time16 | Temp20............Date/Time24 | Temp24............Date/Time28 | Temp28

hello,
Don's suggestion of creating a "mock cross tab" is a good one.
you can also try this Multiple Columns formatting idea if you wish:
1) create a new report
2) create a group on your date field
3) put a summary on your Temp field and move it into the group header of the group
4) suppress the details section and the group footer
5) right click on the details section header in the design mode and choose Section Expert
6) in the Common tab, choose Format With Multiple Columns
7) in the Layout tab, choose a Width of about 2.66"
8) choose Down Then Across for Printing Directions
9) choose Format Groups With Multiple Columns
10) bring this new report into your existing report as a subreport
jamie

New Update (2014.1) - How to have multiple compositions on same page?

With the latest update, it seems as though Edge now always assumes that the composition has an element ID of "Stage". Previously, I was able to have multiple compositions on the same HTML page by simply altering the default id of "Stage" for each composition to something unique. Any workarounds for having multiple compositions on the same page utilizing the 2014.1 update?

You can use the following approach
Dropbox - Multiple.zip
<!DOCTYPE html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
<meta http-equiv="X-UA-Compatible" content="IE=Edge"/>
<title>Untitled</title>

    <meta http-equiv="X-UA-Compatible" content="IE=Edge">
    <script type="text/javascript" charset="utf-8" src="edge_includes/edge.5.0.0.min.js"></script>
    <style>
       .edgeLoad-EDGE-77458053 { visibility:hidden; }
        .edgeLoad-EDGE-77430105 { visibility:hidden; }
    </style>
<script>
   AdobeEdge.loadComposition('2', 'EDGE-77458053', {
    scaleToFit: "none",
    centerStage: "none",
    minW: "0",
    maxW: "undefined",
    width: "550px",
    height: "400px"
}, {dom: [ ]}, {dom: [ ]});
AdobeEdge.loadComposition('1', 'EDGE-77430105', {
    scaleToFit: "none",
    centerStage: "none",
    minW: "0",
    maxW: "undefined",
    width: "550px",
    height: "400px"
}, {dom: [ ]}, {dom: [ ]});
</script>

</head>
<body style="margin:0;padding:0;">
<div id="Stage1" class="EDGE-77458053">
</div>
    <div id="Stage2" class="EDGE-77430105">
    </div>
</body>
</html>
-Siva

How do i print multiple columns on 1 page in numbers

I think I am over thinking this but I have confused myself. I am using Numbers to create a spreadsheet of family names with their corresponding number. I would like to print multiple columns of names on one page to save paper but I can't figure how to do it. Will someone please help me???

Hi BestMommy,
Here is one way. Don't mess with your database. Create a new table for printing.
Database with a Header Row (named Table 1 as an example) might look like this:
Name
1
Name 1
2
Name 2
3
Name 3
4
Name 4
5
Name 5
6
Name 6
7
Name 7
8
Name 8
9
Name 9
10
Name 10
11
Name 11
12
Name 12
13
Name 13
14
Name 14
15
Name 15
New table for printing:
Name
Name
1
Name 1
8
Name 8
2
Name 2
9
Name 9
3
Name 3
10
Name 10
4
Name 4
11
Name 11
5
Name 5
12
Name 12
6
Name 6
13
Name 13
7
Name 7
14
Name 14
Formula in A2
=Table 1::A2
Formula in B2
=Table 1::B2
Formula in C2
=Table 1::A9
Formula in D2
=Table 1::B9
So it loops back from the bottom of a page to start a new column.
I made this example small for the pics, but obviously you could have more rows and columns per page.
Having created your table for printing, select it, Cut, add a new sheet and Paste. Print just that sheet.
Have a look at 'More Like This' at the bottom of this page. Trying to format page to print table in two columns Jerry suggests using Pages instead of Numbers.
Regards,
Ian.
Edit: Having created your table for printing, select it, Cut, add a new sheet and Paste. Print just that sheet. Ian.

Multiple quicktimes on same page, same place

Hopes this makes sense but what I would like is a blank white page with multiple "text menus (hyperlinks)" on the left side of the page that when selected will activate appropriate quicktimes that will then open on the same page, but on the right side.
However, I don't want to see the quicktimes or a quicktime window until it is selected. Then, after the quicktime has played it should disappear and then if another option is chosen from the menu on the left, another quicktime will pop up in exactly the same place. I need this to happen at least 5 times per page.
I'm trying to figure out how to do this without creating a whole new identical page that would be activated and then have to load. All I want to load for each link is the QT's that would appear on that same page, in exactly the same place on the right.
Sorry this is a bit of a mouthful...
imac G5 Mac OS X (10.4.7)
imac G5 Mac OS X (10.4.7)

If there's to be any QuickTime on the page, the QuickTime plugin is going to load, so there's going to be that Q at some point or another. If that's ok, then look at the examples and follow the link to the tutorial on this page.
http://web.mac.com/btkirman/iWeb/Stuff/Welcome.html

Drill-down to multiple columns at same time

Hello,
Is it possible to simultaneously drill down to multiple columns on the same level with one click? I have several attributes that the user will want to see together at all times, so I want to be able to drill from level1 to level2a,2b, and 2c with one click.
Thanks,
Elliot

This drilling down to all the levels may not be available with the OBIEE drill level based hierarchy feature OOTB but as an alternative you can try this at you DB level to create a hierarchy within you data using START WITH and CONNECT BY PRIOR to generate the parent->child levels hierarchy within the view instead of creating multiple hierarchical columns.
Or may be you can try to create separate columns in a table for each hierarchy level. That table could either be in the database or be a logical one in the repository. For example:
Level 1 Level 2 Level 3 Description
1 2A 3A
1 2A 3B
1 2B 3A
1 2B 3B
etc
You then create separate reports for each level, so one report has only level1 in it for this dimension, another report has levels 1 an 2 and a third report has levels 1, 2 and 3 etc.
In each report you put an action link on the levels' cells so that if you click on them you drill up or down by displaying a new report with either less or more level columns.
Hope this helps. Pls mark if it does.
Thanks,
SVS

Urgent - problem with multiple users on same page

Hi all,
I have got an big problem with my app:
when several users are using the same page, the action launched by USER_A affects the page displayed and used for USER_B.
If there is only one user using the page, there is no problem at all.
The webapp is deployed on Tomcat or JBoss and the problem remains the same on both.
Thank you for your help.
PS: I am not accurate because I don't know what to paste here.

In fact, all my page beans are in REQUEST scope...
The only bean in Application scope is the standard applicationBean created by Creator itself.
We use one Bean in session scope which contains another class.
I will try to explain our common process:
- when logging into the app, the session Bean stores user data (rights for using app,...);
- when navigating in the app, the user can search data, modify them and create one (if he has the right to do it);
- to define the screen, we use a lot the beforeRenderResponse();
- when viewing a data, the user can choose to modify it, so depending on the action, the page is in "CONSULT" mode or "MODIFY" mode. In the second one, he can display new gridPanel (as a subform) to populate datatable.
The problem is obvious while using this grid: my grid can disappear if someone else has validated his form before me and if my page goes trough the beforeRender of my page.
It is not really clear. If needed, i can give access to our application to show the problem (and msn adress too to talk about it).
Thank you

Same VO in multiple palce in same page

Hi All,
I have a page which has some input components binded to a VO say EmployeeVO. On the same page i have another section which is also binded to the same VO (and the same fields). I have a save button in both the region.
My requirement is when i click the save button in region 1 the values of components binded in region 1 should save.
When i click on save of region 2, values from region 1 as well as region 2 should be save..
but since both the region are bounded to the same VO, how do i get the independent value.
This is how i am accessing the Values in my Impl class in ApplciationModule :
ViewObjectImpl employeeVo = this.getEmployee();
EmployeeVORowImpl employeeVoRow = (EmployeeVORowImpl)employeeVo.getCurrentRow();hope m clear ..
Ne ideas on this ?
thnks

Hi,
you an try different instances of the VO and access the values from the ADF iterator binding. The code you have only works if the View Object instances are different, which is either when the VO runs in a different transaction (which you can enforce by using ADF regions with non-shared DC scope) or by using different View Objects.
Frank

Multiple drafts of same page?

I want to make more than one draft of the same page. Is that
possible?

I don't think this is possible, and I don't understand why
you want to do this, but you could copy the page and safe it for
the time being under a different name.

Can't run multiple instances on same page!

Hi,
Since I got no response on the shadowbox forums after 2 weeks, I thought it's worth to post it here and hope someone can help me out.
Note: This is also related on non-joomla pages. I've tested it on plain html as well (by Dreamweaver) and get the same issue.
The following issue was posted by me on the shadowbox forums:
I was wondering if the following is possible.
I've tried almost everything where I can think of, but no luck.
Searched many forums and googled a lot, but without success.
I got feeling that I'm so close and missing some simple solution.
So I'm stuck here, I'm not able to figure it out.
This is what I want to achieve:
My website is running on Joomla 1.5. And I'm using a Shadowbox extension.
In an article I've put multiple SWF movies, like previews acting like buttons.
So when clicking on a SWF button/movie, Shadowbox opens and plays a related FLV movie.
To achieve this part I've followed the instructions at this site under FAQ > first paragraph.
So far so good...
Now the ugly thing is when putting multiple swf buttons on a single page, after clicking a random button Shadowbox always displays the same flv movie. I did some altering with ID's and such but had no luck.
Even try to alter with the Shadowbox options and variables, flashVars and such (at this site under Options and Usage) but that worked out for me.
The strange thing is when placing the buttons, let's say in an article belonging to a section and category and make the articles paginated, after clicking the swf button the related flv plays. Browsing to the next page and clicking the button, the related flv will play also. This is the way it should be. Unfortunately it doesn't work when multiple buttons are displayed on the frontpage or an single article regardless whether they belong to sections and categories or not.
Even when a single code is placed in a single article and display 2 or more articles containg a different swf and a different related flv link only the last added flv plays with every random swf button/movie.
This the code I'm using for each swf (actionscript behavior):
FIRST INSTANCE SWF=====================================
on (release) {
getURL("javascript:openShadowbox
('http://test.cquence-multimedia.nl/images/cqmm_test.flv','flv','title')");
SECOND INSTANCE SWF=====================================
on (release) {
getURL("javascript:openShadowbox
('http://test.cquence-multimedia.nl/images/WizardFinal_1.flv','flv','title')");
================================================
This is the code I'm using in the article (2 instances on a single page):
=======================================================

<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="150" height="50" data="images/default_swf_button.swf">
<param name="movie" value="images/default_swf_button.swf" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="9.0.45.0" /> 
<param name="expressinstall" value="Scripts/expressInstall.swf" />  
<object width="150" height="50" data="images/default_swf_button.swf" type="application/x-shockwave-flash">

<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="9.0.45.0" />
<param name="expressinstall" value="Scripts/expressInstall.swf" /> 
<div>
<h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
<p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" border="0" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
</div>

</object>

</object>
</p>
<script type="text/javascript">
swfobject.registerObject("FlashID");
</script>
<script type="text/javascript">
function openShadowbox(content, player, title, width, height, options){
Shadowbox.open({
content:"http://test.cquence-multimedia.nl/images/cqmm_test.flv",
player:"flv",
title:"SHADOWBOX FLASHBUTTON TEST FLV",
width:"800px",
height:"600px",
</script>

<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<object id="FlashID1" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="150" height="50" data="images/default_swf_button2.swf">
<param name="movie" value="images/default_swf_button2.swf" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="9.0.45.0" /> 
<param name="expressinstall" value="Scripts/expressInstall.swf" />  
<object width="150" height="50" data="images/default_swf_button2.swf" type="application/x-shockwave-flash">

<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="9.0.45.0" />
<param name="expressinstall" value="Scripts/expressInstall.swf" /> 
<div>
<h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
<a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" border="0" alt="Get Adobe Flash player" width="112" height="33" /></a>
</div>

</object>

</object>
<script type="text/javascript">
swfobject.registerObject("FlashID1");
</script>
<script type="text/javascript">
function openShadowbox (content, player, title, width, height, options){
Shadowbox.open({
content:"http://test.cquence-multimedia.nl/images/WizardFinal_1.flv",
player:"flv",
title:"SHADOWBOX FLASHBUTTON TEST BRIAN",
width:"800px",
height:"600px",
</script>
=======================================================
This is the link to the page in question:
http://test.cquence-multimedia.nl/index.php?option=com_content&view=article&id=9&Itemid=13
Please, any suggestions would be great!
Thanks in advance.
Best Regards,
John.

Sorry...I still don't get it. What is it about Windows FUS that keeps iTunes from running running the process twice? It can run many other non-Apple windows apps in multiple user sessions (commercial apps, open source apps, audio/video apps, networked apps). I can even run two different virtual machines at the same time under two different user sessions.
Why can iTunesHelper.exe run twice but iTunes.exe cannot? Why can I run Safari at the same time? Quicktime Player runs fine under multiple user sessions.
Blaming it on Windows and/or FUS sounds like FUD. Can anyone give a valid technical reason? Semaphores? Mutexes? An admission (and explanation) that the Windows version is purposely crippled?

Using spry select on multiple forms in same page

Greetings-
My apologies if this has already been answered but after a few searches I've not found my solution....
I have a web page with 2 different forms (completely different open form and close form tags) that I'm trying to get the Spry Select Widget to work in.
Both forms' Spry Select widgets interact as expected with the user with one exception; the second form continues to submit to the action page even if the user is trying to submit an invalid value (the docs suggested using the value of -1 so that's what I'm using). The appropriate error gets displayed to the user but the form continues to submit, which I don't want. Is there a limitation that I missed regarding the use of multiple forms in the same web page with the Spry Select Widget?
FWIW, I'm running the app on ColdFusion and even the cfform/cfselect won't work with the Spry Widget.... I've named and id'd all forms and form elements and still no luck.
Any ideas?
Thanks in advance,
Rich

Hi Brad,
The preamble looks reasonable. I would like to make sure you are clear on the process.
The data needs to be rendered twice (i.e. a 2 step job). In the first step you create a trace file with the page count for each document in it...\trace"^define User:PageCountForTrans_@:TransCount. @$page.@LF."."
In the second step, that trace file is brought back in as a preamble file.
Please confirm that you are in fact passing the data twice.
cheers
Chris

How to auto fetch the value of item based on remaining columns in same page

Hi,
i have 7 items in a same form
like employee name,employee number ,department,designation,email address and contact address
if i entered employee number means i need to automatically display the corresponding employee details in other columns
Please reply asap.............
Regards,
Kani

Hi Scott,
I got the solution but i assigned the default values for weight,courier charge,packing charge,other charges and net charges to ZERO...
and page items to be submited--weight,courier charge,packing charge,other charge..
If i gave --page items to be submited--weight,courier charge--net charge ll be display with out assigning default values(ZERO) for any item..fr tat wat i have to do...
Thanks,
Kani

Printing into multiples columns on several pages

Hi,
I am looking for a way to print a list in TWO columns using SAPscript.
Here is the SAPScript :
/E   POS_ITEMS
L
L    &itemno1& &itemno2&
a list that looks like this :
apricot
banana
chick peas
dill pickle
egg
french fries
grapes
would be processed to look like this with lines per page = 4 :
apricot__________egg
banana_________ french fries
chick peas______grapes
dill pickle
and would be processed to look like this, with lines per page = 2 :
apricot_________chick peas
banana_________dill pickle
egg____________grapes
french fries
Thanks!

Maybe not pretty, but it works.
It's an example with four columns.
nb_col     = 4.
nb_rangees = 6.
DESCRIBE TABLE it_table LINES nb_lignes.
nb_tableaux = ( nb_lignes DIV ( nb_rangees * nb_col ) ) + 1.
IF nb_lignes < nb_rangees.
nb_rangees = nb_lignes.
ENDIF.
pos = 1.
DO nb_tableaux TIMES.
DO nb_rangees TIMES.
1re colonne
    index_col = pos.
    PERFORM lire_valeur USING index_col CHANGING chaine.
    WRITE:/ chaine.
2e colonne
    index_col = pos + ( nb_rangees ).
    PERFORM lire_valeur USING index_col CHANGING chaine.
    WRITE: chaine.
3e colonne
    index_col = pos + ( 2 * nb_rangees ).
    PERFORM lire_valeur USING index_col CHANGING chaine.
    WRITE: chaine.
4e colonne
    index_col = pos + ( 3 * nb_rangees ).
    PERFORM lire_valeur USING index_col CHANGING chaine.
    WRITE: chaine.
    pos = pos + 1.
ENDDO.
pos = pos + ( ( nb_col - 1 ) * nb_rangees ).
ENDDO.
WRITE:/ 'FIN'.
      FORM lire_valeur                                              *
FORM lire_valeur USING p_index
                 CHANGING p_valeur.
CLEAR p_valeur.
IF p_index <= nb_lignes.
    READ TABLE it_table INDEX p_index.
    p_valeur = it_table-nom.
ENDIF.

ADF Mobile - Multiple charts on same page

Hi,
I am new to ADF mobile.I am developing an app for ipad where i have four charts displayed on the same panel item.The panel page has splitter component to show panel item based on the list selected.The charts will be displayed correctly for the first time.Once I select another list item to show a different panel item(which shows a different chart) and go back to the previous list to view the 4 charts,its not showing all the four.Sometimes it shows two,three.If i rotate the device ,the four charts will again get displayed correctly.
Anyone know what I have to do to get this to work properly?
Thanks.

Hi Frank,
I just checked the new HR sample provided with the version 11.1.2.4.0.The Salary guage will display the details first time and once I go to Directs or any other tabs and press 'Comp' button to view the Salary details again,it wont show up.Looks like it is similar to the issue I am facing.
In my case, i just drag and dropped four charts from the webservice datacontrol to the panel item.I am not doing anything specific to set the height/width of charts.
Savad
Edited by: Savad on May 14, 2013 4:41 AM

Multiple Copies of Same Page Content from Various Trays

I use 'gs' to create postscript, and 'setpagedevice' to specify trays.
I print a single page of content (say the file "f.pdf") on each of six different colors of paper, which are pulled from different trays.   At the moment, I do this by repeating the filename "f.pdf" six times as an arg to 'gs'. This creates a single postscript file, into which I insert my six 'setpagedevice' commands.
My 65ppm printer has to re-render the same 'f.dpf' postscript six times, which causes it to only produce about 20ppm.
Is there a way to pass a NumCopies specification so that each of my 'setpagedevice' commands switches trays to print the exact same rasterized bitmap? In other words, to write a postscript file that rasterizes 'f.pdf' only once, and still makes use of that cached image for each 'setpagedevice'?
I'm happy to read manuals, but I don't know what technique or feature name(s) I should look for...
thank you,
- Randy

Randy,
If your original one page ps or eps file was e.g.
72 720 moveto
/Helvetica 72 selectfont
(Hello World) show
showpage
Then you can try something like this:
/MyPage
    72 720 moveto
    /Helvetica 72 selectfont
    (Hello World) show
    showpage
} def
and then in paint procedure in the form:
/PaintProc
    MyPage
Use setpagedevice to select your tray instead of a page size like in the prior post's example before calling the form. Since the form is the same on each
page hopefully it will be stored in the form cache and speed things up but you may need to check the cache size.
Ed

Multiple columns on same page?

Similar Messages

Maybe you are looking for