Multiple competitor for an opportunity?

Hi,
Here is requirement where in the report should project the multiple competitor for an opportunity.One opporotunity and thee in the same row we must have multiple competitors one by one.
Opportunities are coming from a cube and the busness partner and partner functions and competitors are coming from IO.(master data).I have created an Info set where in I have selected the Cube and IO.
But my report is showing only one competitor for an opprotunity.but I must get all the competitor for an opportunity.
points will be definitly assigned.
Thanks,
Ravi

Hi Raj,
Kindly check following paramerters are properly filled in CRM_ORDER_MAINTAIN func.
Import Parameter: LT_PARTNER.
Changing Parameter: CT_INPUT_FIELDS.
I have used this FM to change the document flow of the Activity, Also you can create activity by using BAPI_ACTIVITYCRM_CREATEMULTI.
Regards,
Saurabh

Similar Messages

Competitor Texts in Opportunity (CRM7)

Dear friends,
I am configurating the competitor functions in CRM 7 Webclient. When adding a new competitor for the opportunity, only 2 texts types are shown in the web page,( Strengths and Weaknesses).
Text Object      CRM_ORDPTH
Description      Partner Texts for Transaction
Text Det.Proc.   OPSMCP01
Dscrptn Proc.    Opportunity Competitor
Type            Desc                                Seq      oblig       Access
O001     Strengths                        0010     oblig      OPSM0001
O002     Weaknesses                        0020     oblig      OPSM0001
O003     Strategy                         0030    oblig      OPSM0001
O004     Counter Strategy     0040    oblig      OPSM0001
I think the text Strategy and Counter Strategy should also be shown in the web page for editing and do remember i saw these before.
Could any of you possibly give some advise?
Thanks so much!
Best regards,
David
Edited by: davwang on Dec 30, 2009 11:00 AM

Hi Dana,
this is possible in Opportunity Management.
The design was done the way that in any case you will have a item created where the competitor is assigned to. this is even the case when you don´t use products at all.
the customizing is done on the transaction type level.
goto to transaction type customizing / customize header. There you can find the "Competitor Mode".
The mode allows to be "header mode" or "item mode".
if you select header mode the assignment (block) is visible on header level, else on item level.
hope this helps
best
martin

How can multiple files for the same genre be consolidated

I organize my iTunes files in genre folders for easy access. ITunes creates multiple folders for some genres and allows a single (preferred) genre file for other much larger files. How can I consolidate multiple files with the same genre?

Thanks. I've done what you selected. The problem is that despite all files being identified with the same genre, iTunes groups some genres in two separate folders. Thus, I have two "Country" folders, for example. More perplexing is that iTunes groups my largest genre folder, "Jazz", in a single folder.

Not able to generate multiple lines for headers in report

Hi,
I am new to BI publisher and not able to generate multiple lines for headers. Please help me to resolve.
I am using RTF template, data source as PS Query and XML file (system generated from the data source)
When I am using system generated 'First XML' file, I am getting output in the follwoing format.
TEAM_MEMBER, PROJECT_ID, NAME, START_DT
e.g.
EMP1 , 71000, Sample, 01-Jan-2010
EMP1 , 72000, Sample, 01-Feb-2010
EMP1 , 73000, Sample, 01-March-2010
But I want the report to be generate with multiple projects for one employee like below format , for that I used 'Second XML' file but I am getting blank report.
In short if there is one to many case, how to show in reports??? Please correct if I am going wrong.
TEAM_MEMBER
PROJECT_ID, NAME, START_DT
PROJECT_ID, NAME, START_DT
PROJECT_ID, NAME, START_DT
e.g.
EMP1
71000, Sample, 01-Jan-2010
72000, Sample, 01-Feb-2010
73000, Sample, 01-March-2010
**********First XML**************System generated XML ****************************
<?xml version="1.0"?>
<query numrows="2" queryname="SY_EMP_PROJECT" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="">
<row rownumber="1">
<TEAM_MEMBER>TEAM_MEMBER </TEAM_MEMBER>
<PROJECT_ID>PROJECT_ID samp</PROJECT_ID>
<NAME>NAME sample data</NAME>
<START_DT>2010-08-25</START_DT>
</row>
<row rownumber="2">
<TEAM_MEMBER>TEAM_MEMBER</TEAM_MEMBER>
<PROJECT_ID>PROJECT_ID samp</PROJECT_ID>
<NAME>NAME sample data</NAME>
<START_DT>2010-08-25</START_DT>
</row>
</query>
**********Second XML**************Manually created XML and using to show multiple projects for one employee****************
<?xml version="1.0"?>
<TEST numrows="2" queryname="SY_EMP_PROJECT" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="">
<TEAM_MEMBER rownumber="1">
<TEAM_MEMBER>1</TEAM_MEMBER>
<EMPLOYEE_NAME>SAMPLE</EMPLOYEE_NAME>
<PROJECT>
<PROJECT_ID>1111</PROJECT_ID>
 <PROJECT_DESCR>SAMPLE</PROJECT_DESCR>
<START_DATE>01012010</START_DATE>
</PROJECT>
<PROJECT>
<PROJECT_ID>1112</PROJECT_ID>
 <PROJECT_DESCR>SAMPLE</PROJECT_DESCR>
<START_DATE>01022010</START_DATE>
</PROJECT>
</TEAM_MEMBER>
<TEAM_MEMBER rownumber="2">
<TEAM_MEMBER>2</TEAM_MEMBER>
<EMPLOYEE_NAME>SAMPLEC</EMPLOYEE_NAME>
<PROJECT>
<PROJECT_ID>1111</PROJECT_ID>
 <PROJECT_DESCR>SAMPLE</PROJECT_DESCR>
<START_DATE>01012010</START_DATE>
</PROJECT>
<PROJECT>
<PROJECT_ID>1112</PROJECT_ID>
 <PROJECT_DESCR>SAMPLE</PROJECT_DESCR>
<START_DATE>01022010</START_DATE>
</PROJECT>
</TEAM_MEMBER>
</TEST>
Edited by: ganeshtw on Aug 25, 2010 12:14 AM

Hi,
With your first xml you can print like
EMP1
71000, Sample, 01-Jan-2010
72000, Sample, 01-Feb-2010
73000, Sample, 01-March-2010While creating the RTF template you can use the Group by option.
<?for-each-group:ROW;./columnname> then print the column name
<?columnname?>
--Then your table format
71000, Sample, 01-Jan-2010
72000, Sample, 01-Feb-2010
73000, Sample, 01-March-2010
<?end for-each-group?>
Thanks.

How to get one value from multiple duplication for a key figure field

Hi expert,
      I have a infoprovider, with following format:
        employee     hourly_rate   action_type count of action
     there are multiple rows for each employee, I want to create query as follows:
        employee     hourly_rate   action_type count of action
     in which hourly_rate is constant , only retriving one value from multiple rows for one employee, count of action should be summarized.
how to get this hourly_rate.
Many Thanks,

Hi,
put the employee in rows panel -> reaming object put it in free char panel.
suppress the all result rows for the all object except employee .
select the object -> go to query properties -> select display tab -> select result rows -> select suppress.
select the employee -> go to query properties -> select display tab -> select result rows -> select always display. - now it will give employee wise hourly rate summarize data.
Thanks,
Phani.

Passing multiple values for a single field in URL to call sap Transaction

Hi All,
I need to pass multiple values for a single field to SAP transaction .
means if i have say a field "Date" which can contain more than one value, but its not a range which has two fields . How is it possible.
Let me know pls.
Regards,
Sirisha.R.S.

Hi Satyajit,
I need to call a transaction with multiple values which gives me the report based on those values.
So I need to pass multiple values for a single parameter.
I hope u got it.
Regards,
Sirisha.R.S.

Any way to pass Multiple Values for a single Label in the Parameter?

I have a Report that Contains 2 Parameters, @Customer & @Area. When trying to set up the Available Values for @Area, I'm having issues using multiple values for one Label, i.e. = "4006" Or "4610"
One of the Filters in the Report is an Operation number, which is the [OPERATION] field, which is setup as a filter on the Tablix referencing the @Area parameter.
PROBLEM: I cannot retrieve any data when trying to use the ‘Or’ Operator here. If I simply put “4006” or “4610” I retrieve data, but when trying to combine it returns no data.
Example, I need to allow a user to select ‘Chassis Incoming’, which would include data from Operations 4006 & 4610.
QUESTION:
Any way to pass Multiple Values for a single Label in the Parameter?
I realize the typical solution may be to use ‘Multi-Value’ selection, but in this case we want the User to select the Area and the multiple values for Filtering will be automatically determined for them. Otherwise, they are subject to not getting
it correct.
I have tried several different ways, such as =”4006” Or “4610”, =(“4006”, “4610”), = In(“4006”, “4610”), etc….
Note: We are using Report Builder 3.0

Based on my experience, there's no way to 'intercept' the query that gets passed back to SQL Server, so a Split wouldn't work.
Try creating either a function or stored procedure using the code below (compliments to
http://www.dotnetspider.com/resources/4680-Parse-comma-separated-string-SQL.aspx) to parse the string:
CREATE FUNCTION dbo.Parse(@Array VARCHAR(1000), @Separator VARCHAR(10))
RETURNS @ResultTable TABLE (ParseValue VARCHAR(100))AS
BEGIN
DECLARE @SeparatorPosition INT
DECLARE @ArrayValue VARCHAR(1000)
SET @Array = @Array + @Separator
WHILE PATINDEX('%' + @Separator + '%' , @Array) <> 0
BEGIN
SELECT @SeparatorPosition = PATINDEX('%' + @Separator + '%', @Array)
SELECT @ArrayValue = LEFT(@Array, @SeparatorPosition - 1)
INSERT @ResultTable VALUES (CAST(@ArrayValue AS VARCHAR))
SELECT @Array = STUFF(@Array, 1, @SeparatorPosition, '')
END
RETURN
END
Once created you can do things like this:
SELECT * FROM Parse('John,Bill,David,Thomas', ',')
SELECT * FROM (SELECT 'John' AS TestName union select 'David' AS TestName) AS Main
WHERE TestName IN (SELECT ParseValue FROM dbo.Parse('John,Bill,David,Thomas', ','))
This is what your SQL query would probably look like:
SELECT OperationID, OperationName FROM dbo.Operations
WHERE AreaID IN (SELECT ParseValue FROM dbo.Parse(@Area, ','))
You may need to fiddle around with the Separator depending on whether SQL Server inserts a space between the comma and next value.

How to print multiple footers for each page in RTF template xml report.

Hi,
How to print multiple footers for each page in RTF template xml report.
i am able to print ( two sets ) ...
up to last page ( one template ) and for last page ( another template).
i want to change the footer information based on the group value printed in the report ( it might be 5 to 6) In every report run.. can you please check and let me know do we have any feasibility to achieve this.
Thanks in advance.
Regards,
KAP.

You can remove all other logic, like last page only contents (start@last-page:body), etc and section breaks if any you have inserted manually.
Just have for-each@section logic.
It would be difficult for me to guess what you have done without looking at your RTF or describing here.

I am using my Apple ID on multiple devices for other people. How can I make icloud work only for my devices?

I am using my Apple ID on multiple devices for other people in my family and now I am getting a new iphone and want to take only the information on my old iphone to the new one without the information on the other devices using the same account. Is there a way to do that?
Also, for the future can I use multiple addresses and apple IDs for the same credit card information?
Thanks in advance,
Marian

Ok, so you want to remove data (contacts, bookmarks, calendar etc) from other users from your iCloud/Apple ID?
If you want to use your ID for your family because it is the account everybody uses to buy stuff then you only need to ensure that your apple ID is set up in the store (settings-store) and then the users of each device and put their own apple ID in icloud/message/facetime/etc.
To set up your device, in my opinion, it is best to back up to itunes, and then plug your new device into itunes and "set up as ..." and select the backup from your device. This will import all your data/settings and your new device will be set up just like your old one.
I am not certain about using the same payment method for more than one account.

HT1495 Multiple ipads for classroom use how can I make them have the same apps?

How do I sync multiple ipads for classroom use

There is no bookmarks tab, expect you are referring to the bookmarks menu on the menu bar ("File, Edit, View, History, Bookmarks, Tools, Help") on your XP system.
Once your restore your menus on you Window 7 system, you can get rid of the bookmarks button. After going through the 10 steps below your toolbars on your Windows 7 system will be more usable again and like your XP system, none of which has anything to do with Sync.
You can make '''Firefox 6.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface
the first 9 steps above are basic toolbar customization the following link is in step #1 above. (See before/after picture (.png) in the footnote)
*How do I customize the toolbars? | How to | Firefox Help
*:https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars
 Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.
There is a lot more beyond those first 10 steps listed, if you want to make Firefox more functional.
Before and after customizations, the following also includes [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4styles styling changes] besides rearranging toolbars and toolbar items.
* http://dmcritchie.mvps.org/icons/fx4toolbars.png
*:Bookmarks toolbar -- [http://userstyles.org/styles/46947 Bookmarks Toolbar Fx4 Blue/Folders, Red/Bookmarks]
*:Tab borders -- [http://userstyles.org/styles/24728 Tab Color Underscoring active/read/unread (Fx3.6)] red=active tab, blue=read, green=unread, magenta(not shown)=loading

How do I add multiple emails for one contact to the same group list?

When trying to set up a group email list using address book, is there a way to include multiple emails for the same contact to one group. For example I'm trying to set up a baseball team group email. Some kids want emails sent to both mom and dad which have different emails. I currently have them in my address book as the boy's name with the emails listed as mom and dad. I can add one "mom" to the list but when I compose the email, it will use the most recent email used. I would like the group to contain both addresses for mom and dad without setting up to different contacts for the same player.

var cToAddr = this.getField("saManager").value + ";" + this.getField("ManagerEmail").value;

How can I manage multiple iPads for different students?

Problem: I need to manage multiple iPads for my students with special needs. I need to download different apps to different iPads and I'm not sure how to keep their apps separate but still keep ultimate control of the units (i.e. lock them from loading anything on the apps that we at the school district haven't approved).
I need to be the only one doing updates, loading software, etc., and don't want to keep using my own personal iTunes account...any suggestions?

If the presenter is using a computer and everyone else has an iPad this is very easy and free. Just use http://join.me and on the iPad just download their free app

WebTools Creating multiple users for the same User

I had to make a few changes to a BP in SAP which will synch back into WebTools but now I am getting multiple users for the same contact. For example my user is cspehar_1 now in Webtools there are cspehar_1, cspehar_2, cspehar_3 and so on up to _8.
This is occuring for several users in webtools.
What causes this and how do I fix it?
Thanks,
Craig Spehar

Hi Craig,
There are two ways to cause this that I am aware of:
1. Change the "Business Partner Synch Contacts Field" setting after the initial synch.
2. Change the Web UserID on the BP contact in B1 (OCPR.U_PRX_SID).
After that, update the user in WT and synch. (might also happen if you update the BP in B1)
Since the synch is using the OCPR.U_PRX_SID to identify the contact, it will not be able to find it in B1 if the U_PRX_SID has changed. When it does not find it, it assumes it needs to be created. This results in a duplicate.
The solution is to reset the U_PRX_SID back to what it was or set the synch contact field back to what it was.
Then delete the last created duplicate contact from B1.
There may be further data corruption issues here. If orders/quotes/opportunities or other dependant data has synchronized referencing the duplicate user, these data will need to be correct as well.
FYI, whatever caused this was probably at the root of your order problem as well.

Multiple DEVL_PROJECT_ID for the same model in CZ_DEVL_PROJECTS Table.

Hi,
Did anyone came across this issue!! I am triggering the config engine from back and and trying to pick up a model but it has multiple devl_project_id's. :(
I could see multiple DEVL_PROJECT_ID for the same model in CZ_DEVL_PROJECTS Table. Apart from DEVL_PROJECT_ID and created_by_date every thing looks the same.
Below are the 2 records the data from the table
select * from CZ.CZ_DEVL_PROJECTS where product_key = '122:17056' and DEVL_PROJECT_ID in (12943,15321)
DEVL_PROJECT_ID     NAME     ORIG_SYS_REF     CREATION_DATE     LAST_UPDATE_DATE     PERSISTENT_PROJECT_ID     MODEL_TYPE
12943     ASI XXX MODEL(122 17056)     OPTIONAL:122:17056     12/18/2012 10:01     12/18/2012 10:01     11100     A
PRODUCT_KEY     ORGANIZATION_ID     INVENTORY_ITEM_ID     BOM_CAPTION_RULE_ID     NONBOM_CAPTION_RULE_ID
122:17056     122     17056     802     801
15321     ASI XXX MODEL(122 17056)     OPTIONAL:122:17056     12/26/2012 23:10     12/26/2012 23:10     11100     A
122:17056     122     17056     802     801
Thanks in advance,
-vijay

It can be possible to have multiple devl_project_id for the same model in cz_devl_projects Table.
Case -1 : When you delete the existing model and re-import again.
case 2:
When you publish the model locally, it will create the same copy of the record with different devl_project_id, creation_date, last update_date etc..\
You can see that for published records the last_updat_login, checkout_user will be null and for the original model, last_update_login,checkout_user (if model is locked) will not be null.
-Murali
Edited by: 907569 on Jan 8, 2013 10:55 AM

How can I combine multiple listings for same genre on iTunes 11?

When I downloaded the newest iTunes version 11, I suddenly had multiple listings for the same genre. I literally have 63 genre listings for "Trance"; 4 listings for "Hip-Hop/Rap" and a few others. There was obviously not a problem with the old iTunes version as they were all grouped together. I do get music from several sources but I have no idea how to combine all my "Trance" listings into one. It takes longer to scroll through the "Trance" genres than the rest of my genres combined. I tried to individually change one the "Hip-Hop/Rap" listings by using the "Get Info" tab and typing in the genre until iTunes can autofill the rest but the problem remains. Any ideas how to combine all these into one genre without compromising the genre name? Thanks
Mac OS X Version 10.6.8 Snow Leopard

I believe the closest you can come is look at your songs in Songs. There you can sort by albums.
The album view does not contain a list view any longer.

Multiple competitor for an opportunity?

Similar Messages

Maybe you are looking for