Multiple computers connected to one monitor

I have an HP Pavilion 23xi IPS Monitor. I currently have it connected to my new PC via and HDMI cable. Does this monitor have the capability to also be connected to an older computer via USB or VGA? If so, do I need to buy extra hardware, like a KVM switch? And can you recommend a good tutorial on how exactly this can be achieved?
Thank you
DaHowitzer

Hello DaHowitzer,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are looking to connect your HP Pavilion 23xi IPS Monitor via either a USB or VGA connection. According to page 6 of the Pavilion IPS LED Backlit Monitors User Guide demonstrates how to connect via a VGA cable to your computer. As this monitor has a VGA port, but no USB port this is the method you need to use.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a wonderful day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

  • I have my ipod backed up on multiple computers but only one recognizes all my playlists.  How can I get all my play lists to show up on multiple computers?

    I have my ipod backed up on multiple computers but only one computershows all my playlists.  How can I get all my play lists to show up on multiple computers?

    If you want to connect and use an iPod on more than one computer you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply.
    Using iPod with Multiple computers
    Managing content manually on iPod
    If your iPod is set to update automatically take care when connecting to a different computer if your current one is out of commission. You will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it.

  • Multiple db connections for one report

    Hi all,
    I am using Oracle Reports 10g R2. Could someone tell me if Oracle Reports supports multiple database connections for one rdf file, like this (using servlet)
    http://your_web_server:port_num/reports/rwservlet?server=server_name&report=myreport.rdf& userid1=username/password@my_db1&userid2=username/password@my_db2 &desformat=pdf&destype=cache
    I am asking this question because my report needs data from two separate Oracle databases.
    Edited by: user12239004 on Apr 27, 2010 2:14 AM

    No, you can only have one login.
    However, this is simple to resolve by creating a database link in one database to the other database.

  • Talking amongst multiple computers with only one .mac acct

    We have multiple computers but only one .mac account. We would like to isight/ichat with our home-based computers from our laptops (ie: talk with the kids at home while we're on the road...) but can't figure out how to make it work. Do we need to set up SEPARATE .mac accounts ("Family Plan") in order to isight/ichat amongst our computers or can we arrange it all, using only one account?

    Magpie is right.
    You can get FREE AIM Name(s) here.
    You can also get additional free dot mac names if you like. The names will continue to work as iChat names after the free trial (and other dot mac features) expire.

  • Two computers connected to one router, two external IP? How?

    Hey Im just playing around with the Remote Desktop and I have two computers connected to a router but when i search for external IP it shows only one of them. Is there a way of distinguishing more computers in one network from outside of the network? THANKS!!!

    http://support.apple.com/kb/TS1882
    To connect to more than one computer behind an NAT router, you'll need to have Apple Remote Desktop 3.3.

  • I want to setup multiple computers/devices with one user

    I have multiple computers, Macs and PCs, and two iOS devices; iPad and iPhone. I want to setup my server as a file server for all devices with me as the only user. I'm having trouble finding that scenario. Any help would be appreciated. Thanks in advance.

    Thanks for the prompt reply. I found a lot of information beyond the basic instructions for configuring the WebDAV before turning it on. But unless there's a way of using the server to store files instead of iCloud or Dropbox, there isn't a real need for connecting the iOS devices to my server. Again, thanks for prompting me to "read the manual".

  • Can I have multiple clouds connected to one id?

    I have 5 phones and several iPads connected to one id and sharing one cloud. We share music and contacts however, when one phone rings, all phones ring. When one of us is texting, we all can see who is being texted but can't read the text. Is there anyway to unlink the phones AND still share music on this id?

    Welcome to the Apple Community.
    You can all share an ID for iTunes, but all have your own ID for iCloud.

  • Multiple sockets connected to one port

    Hello I am running a LabVIEW VI that is based on the Labview TCPServer example. I am wondering what the best way to deal with multiple connections to a single port would be. For example I have a device(could be thought of as the same thing as the TCPClient vi) that connects to the server using the port number and the IP address. The communication works fine when there is only one device trying to connect to the server, the problem occurs when two devices try to connect to the server. When the first device connects all data sent shows up fine, when the second device connects, the status on the device indicates a proper connection but none of the data sent shows up on the server side. I assume that I must do something with the connection ID to distinguish between the two connections, but I was wondering if there was an example or something that deals with this issue, or if someone would like to explain how I could get the data to show up properly. Any help is appreciated, thanks!

    I am hoping that there is something similar to the java api where there is some way I can start a new threads to handle multiple connections on the same port. I would assume that if java has it LabVIEW would have something similar. Unfortunately I am not sure how to go about finding out how to do such a thing in LabVIEW.
    The way that I assume the TCPListen.vi works is that there is some mechanism polling the specified port and ip address waiting for a request for a connection. Once a request is received the VI creates a connection ID so that the other subvi's can perform operations on the specific connection. It also looks as though the TCPListen.vi continues to listen for new connections, because the clients indicate a connection when more then one of them are run trying to connect to the same port and IP.
    So my question is either, how to start a parallel process to handle the new connections, or where can I find the new connection ID (because the indicator only shows the connection id of the first client to connect). Basically I am having trouble distinguishing between the multiple connections on the same port.I would like to keep all of the clients sending data through the same port if possible.Each client identifies itself in its data message so keeping the data organized is not a problem. 
    I also looked at the data socket examples, mainly because the Java examples I was looking at used "Sockets". I ran into similar troubles finding a way to create distinguishable connections using DS's as well. Anyways, any help is appreciated. Thanks.

  • Is it possible to have 2 Apple computers connected to one ISP line?

    I just purchased the latest iMac, and instead of selling the old iMac (4 years old), my wife wants it for her desk... (both computers for home use).  We have one ISP line that comes in... (fiber optics DSL).  Is it possible to connect both computers to just the single ISP line?
    Thanks,
    Jim

    Neophutos wrote:
    I currently have the Cisco Linksys WirelessN Router with 4Port Ethernet Switch E1200 which you indicated..
    So, I can just hook a cable from one of the empty Linksys Ports and run it to the other computer?
    Yes, you can use an Ethernet Cable for both or go Wireless to one if it's setup in a different room.
    Neophutos wrote:
    Also, we currently have both of our email address's on the old computer.  We want to separate that also to each computer.... would one of us need to get a new email address to do that?
    Thanks,
    Jim
    Not if the accounts are already different, beside most Internet Service Providers allow for several Sub Accounts.
    You could remove one account from the old iMac for privacy if you wanted, but it's really not necessary.
    Personally when I passed down my old iMac to the Wife and Grandkids, I left most everything intact on it and then personalized the new Mac just for me.

  • 2 routers - computers connected to one can't "see" computers on other

    Router1 is WRT54G 192.168.0.1 subnet 255.255.255.0 doing DHCP starting at 192.168.0.10. This is connected directly to my cable modem.
    Router2 is WRU54G-TM and ran through the default setup from TMO. Despite the urging of the setup, I didn't wan't to replace my WRT54G with the new one. So, it's set with IP of 192.168.24.1 subnet of 255.255.255.0 and is also doing DHCP starting at 192.168.24.100.
    Computers on both routers route fine to the internet. The problem is computers on Router1 can't be seen by computers on Router2.
    From Computer2 on Router2 I can ping Computer1 and (on Router1) get correct IP address (192.168.0.16) but get "Destination host is unreachable".
    I'm guessing this is a subnet mask issue? Or do I need to do something with routing tables? Or am just demonstrating my ignorance
    I appreciate any help.
    Solved!
    Go to Solution.

    digger69 wrote:
    From Computer2 on Router2 I can ping Computer1 and (on Router1) get correct IP address (192.168.0.16) but get "Destination host is unreachable".
    That sentence is fully unclear to me. Where is Computer 1? You first write you can ping computer1. Then you write you get an error. When do you get the error exactly? What do you get when you ping computer1? Which computer gets the "correct IP address 192.168.0.16"?
    Your problem is neither a subnet mask problem nor a routing table problem. You have internet from both routers. If there was a subnet mask or routing issue you would not have internet.

  • Multiple PPPoE connections on one Mac

    Hi,
    I have two PPPoE type connections on my MBP; one is meant only for downloading whilst the other is my main browsing, mail, etc account.
    The problem I have is this, before getting the second ISP account that I use for major downloading, I had just one PPPoE connection that I used for everything. Now that they are separate, I have the main one (the one I use for my mail and browsing, etc) set to connect when needed, hence it connects automatically when my MBP starts up due to the fact that my mail starts up on login.
    I can manually disconnect it and connect the other account (downloading account) then use that connection for whatever it is that I download or stream, but the problem comes in when the other PPPoE account connects (because I never close my mail, only hide it).
    So I am a little concerned that the wrong PPPoE connection might be used to download/stream my media. And, yes it is important that the accounts are used for different processes. With two PPPoE connections active (never knew that was even possible), I have been left with the option of removing the "connect when needed" option from my default connections meaning I now (It sounds lazy, I know...) I must click connect for each account when they are needed and that being as soon as I switch my MBP on.
    Any assistance would be greatly appreciated, thank you much!
    Kal

    Never mind, I figured it out. Set the service order appropriately.

  • Multiple ethernet connections in one computer?

    I have two ethernet connections in my computer (2 IP Addr) I would like one connection to talk to a PLC(UPD) While the other (wireless) to talk to a printer across the room (TCP Visa Resource- open and write) Is this possible in LV7.1

    jaggedmedia wrote:
    > I have two ethernet connections in my computer (2 IP Addr) I would
    > like one connection to talk to a PLC(UPD) While the other (wireless)
    > to talk to a printer across the room (TCP Visa Resource- open and
    > write) Is this possible in LV7.1
    There should be no problem. Assuming your network is setup properly and
    each network card has its own subnet, the TCP/IP socket driver should
    route any package through the correct network interface.
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Multiple dates connecting to one timedimension in SSAS

    Hi,
    I have Three dates in my FactSales - Deliverydate, shippingdate, shippingdateconformed - at the moment deliverydate is connected to the Time dimension. How do I connect the other two dates to the same Time dimension?

    Hi ,
    You can create One Time Dimension with following Keys ;
    Deliverydate Key , shippingdate Key, shippingdateconformed Key and Date Key and then in fact table create 3 relationdhip using Date Key .
    Deliverydate Key -> DateKEY
    shippingdate Key -> DateKEY
    shippingdateconformed Key -> DateKEY
    For Example :
    Relationship like ;
    If you  are talking about Role Playing Dimension .
    Kindly follow below link;
    http://www.mssqltips.com/sqlservertip/3117/defining-role-playing-dimensions-for-sql-server-analysis-services/
    Thanks
    Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com

  • Multiple iPods connected to one PC?

    I have just purchased a iPod Nano for my wife. I would like to digitize and organize music for the Nano on the same PC that I have been using for my iPod 40g. I seem to be able to create a new folder that digitizes and seems to organize music for her, but when I open iTunes software it still shows my iPod 40g library not hers.
    How can I set up an area for a library on the same PC for the iPod Nano to collect songs and update the Nano without interfering with management of the songs in the library for my other iPod?
    Is it a matter of having two versions of iTunes on the PC in different folders?

    Hey Paul:
    Just to let you know that you can set each iPod's preference differently even if you are using the exact same iTunes library!
    One thing I always recommend is creating a playlist or playlists for each and every single iPod on your computer. We have seven iPods that we are using with the exact same iTunes library.
    Now, how do you do it? It's fairly simple.
    The first step step is to craete an iPod specific playlist. So all you have to do is click on the little plus sign in the bottom left corner of iTunes and then type in the playlist's name (e.g. if it's your wife's playlist: <the name of your wife>'s playlist. Then you can connect the iPod. Once the iPod is connected you change that iPod's specific preferences by going to Edit>Preferences and selecting the iPod tab. Then all you have left to do is make sure you select "automatically update only selected playlists" and check your wife's playlist in the selection of playlists.
    You can repeat this step for as many iPods and people's playlists as you want....it's quite ingenuous!!!

  • WRT54GS not letting multiple computers connect at once.

    I have a problem where my router will only allow one computer to access the internet at one time. Ie, if I am downloading something on my computer and my wife gets on the internet on her computer, my download abruptly stops. This is the same with all of the computers on my network except for the laptop which is wireless.
    I have the newest 4.71.1 firmware and I believe everything is setup correctly. The problem is fairly recent and I didn't have it before with the same settings.

    I reset the router by holding the reset button for over 30 seconds.  I rebooted everything again too.  I then hooked up my main computer, went into the router settings and made sure everything was set up right.  I was able to surf around on the main system no problem.  I then plugged the second computer in and it too was able to surf the internet no problem.  I started a big download on the second computer and then I opened up Firefox with the main system.  As soon as I opened Firefox, the download on the second computer abruptly stopped.
    I'm therefore right back to where I started again.  Only one computer can access the internet at one time.  As there are now only two computers plugged into the router (wired) and they're showing different IP's and I'm still having the same problem I'm going to assume the router is just plain dead.  To think that these Ver. 2's are supposedly more stable than the newer versions!  I've already ordered a replacement D-Link Gaming router. 

Maybe you are looking for