Multiple Consigned Info-record Based on MPN

Hi All,
We have an MPN Profile that has a setting of - MPN Mandatory & Info Records for MPN. This MPN Profile is assigned into an Internal Material which will be managed with our Inventory.
We have multiple MPNs from a Single Vendor with different price and that is created separately in the Info-Record.
When the PO is created with the MPN, it is working fine by selecting the Internal Material and I am able to do GR for that PO which comes in Stock as Internal Material.
However, my problem is that I am not able to create a K-Type PO for those MPN, as system prompts error messages like MPN008 => "Consignment and MPN mat. only possible in case of info recs. for IM mat."
I have gone through the SAP Help and it is also mentioned as a NOTE in there : If you are working with consignment info records, you must create the info records for your firm’s own material. Reason: in the case of goods issues involving consignment materials, the system searches for the info records for the firm’s own, inventory-managed materials and does not take MPN materials into account.
I have a question now => Does SAP allow the Consigned Process to be practiced for MPN Materials?
Any suggestion/idea/solution is most welcome!
Regards,

Hi Rahul,
Thanks again for your reply!
I did the way you suggested and I was able to create Consigned POs for the MPN. However, my problem is still un-resolved, as you can see the problem from the following process steps.
1) GR for the Consigned PO is done and now the IM Material is in the Vendor Consigned Stock.
2) I have pulled the Quantity via Tcode MB1B/411-K.
3) When I run the MRKO (Vendor Liability Settlement), system took the Consigned Info-record of the IM Material (which is only 1).
_Problem:_ System while doing MRKO, is not considering the MPN Inforecord, as I am not able to create Consign Info Record for MPN Materials.
If you are not clear about my scenario, I can explain in detail.
Regards,

Similar Messages

  • Access consignment info records while costing

    Hi
    I have a valuation variant in which the strategy for material costing has a sequence in which i want to access price from info records while costing thru ck11n or ck40
    If i create normal info records,i am able to access the price from info records.But if i create consignment info records "K" type the system does not read it..
    SAP note no 552486 states that SAP reads only normal info records and subcontracting info records.
    So what is the way out..if i want to access the consignment info records
    Any tip,guidance,clue,idea on this subject will be of great help
    Thanks
    Swami

    Hi Andreas,
    Could you please give details in how did you use Userexit COPCP005?
    Kind Regards!

  • Price Date Datermination in consignment Info Records

    Hi
    We are using consignment with some vendors and we have defined consignment info records with them with different price conditions for different dates.
    It is possible when transferring materials from consignment stock to our unrestricted stock, picking the price corresponding to date of the PO and not the price corresponding to the date of the transfer?
    In the  info records (ME!u201D) this issue can be performed with the field Price "Determination (Pricing) Date Control" set to vale "Purchase Order Date" I have tested it and it seems not to work with consignment info records
    Many thanks in advance

    Hi,
    Try using price date field from Vendor master purchasing view
    Else give different validity periods for info price
    Diwakar

  • Info record based on lead time

    How to create info record based on Lead time.
    If vendor supplies material with in 5 days cost will be 5 dollars each
    if he supplied after 5 days cost will be 3 dollars.
    how to control this function in info record or in Purchase order or in Conditions.
    Thanks
    SUNIL KUMAR

    closed

  • Expired validity price of Consignment Info record

    For the consignment process we created the consignment info record with the pricing condition validity from 1.1.2008 to 31.7.2008. the consignment contract validity is from 1.1.2008 to 31.12.2008.
    After 31 July the price was agreed to be changed, but the user forgot to change the price validity period of the consignment info record.
    But still we are able to create the Consignment Po referencing the consignment contract with the old price validity period ending 31.7.2008.
    Even the system has not given any warning message or stopped the user to make the Po though the price validity has expired.
    In future how can we prevent this case?
    Is there any message that can be populated at the time of Po creation if this case happens.
    What shall we do with the goods that have come for the PO from 1.8.2008 to 10.8.2008, they are still lying in consignment Godown, he have not made any withdrawal against these POs.
    Regards

    Hi
    i have tried this scenario in the test environment. i just happened with me. i have a consignment info record with the validity period which expired. even with that i could make PO and do GR. it didnt allowed me to do GI to my own stock. at that time it gave me the error that the consignment price is not maintained.
    if you see by logic PO and GR could be possible for consignment stock or order. the liabilities are only created when we issue goods from consignment stock to own stock. at that time we need the price of the stock since we are not going to receive any invoice from the vendor about the price of the stock. its taken from info records.
    please correct me if i am wrong.

  • KKPAN - Consignment info record

    Hi,
    I have a mterial with a standard as well as a consignment info record. Both the info records have the same number but the info record price is different.
    Now in KKPAN whenever I enter the info record number, it defaults the price from the standard info record. How can the price default from the consignment info record?
    In material master, the special procurement field also indicates consignment.
    Sincerely,
    Nicky

    Hi,
    Then what do I do in a case when I want to update the material master cost from the cost in consignment info record?
    Will the only option be MR21 manual cost update?
    Sincerely,
    Nicky

  • Provision in consignement info record

    Hi Gurus,
    I have created a consigment info record with a provision discount ( a statistic condition in ME11).
    I have done a good receipt with MIGO, then when I have done MB1B movement type 411 K, in the posting I have only  the accounting of PB00 and the accounting of my provision?
    Anybody could help me to know why the provision doesn't appear in the accounting?
    I have done the same test with a PO without creating a info record consignement, and it s woking, I have my provision in accounting;
    Thanks for your help
    Regards
    ELMKA

    No the system doesn't take the vat of info record. That why I m asking help in this forum.
    the consignment info record is already active in tcode OMEV. So the pb doesn't come from there.
    And for my second issue, I need to add a condition type ( a end year of discount)in info record,  it s a statistic condition, and normally I don't want it in the price.
    Normally the price of this condition must appear in accounting but only in statistic.

  • Related to Consignment Info Record

    Hi All,
    I have maintained the condition record through MEK1 and I have not maintained the Purchase info record for the consignment PO.
    While I am creating the PO, the error is showing the Purchase info record is not created for the vendor.
    than I have maintained Consignment info record inactive.
    Still the error is showing at the time of creation of consignment PO.
    Kindly help me to create the consignment PO without purchasing info record and with the help of condition record only.
    Thanks in advance.

    If you want execute consignment process effectively you need consignment Info record.You are just maintaining condition record,For settlements you need tax code .So system will pick all required data for settlements  from Info record.
    To recognise consignment price for an article and Vendor combination you need Consignment info record.

  • Consignment info record error

    Dear All,
    I have activated the Consignment prices via info-record setting in configuration. But still, when I create the PO for consignment the info-record number does not get populated in the PO. During 411 K the price is not determined, during settlement via MRKO the price is shown as zero and the settlement is not completed.
    I checked the all the master datas - Material/Vendor and the Purchase info record - I have maintained them correctly for consignment.
    The PO has been created with the right material/vendor Purchase org combination.
    I have maintained the message for output type KONS in MRM1
    I still havent figured out why the consignment info record is not getting identified and populated in the PO and the price in the info-record is not getting detected. Can anybody help?
    Regards
    Badrinath Murali

    Hi ,
    Please activate Consignment info records in SPRO -> MM-> General Settings for Materials Management -> Activate Consignment Info record ( Transaction code OMEV)
         & Also check the valitidity condition periods date ranges in Condition record and Tax code.
    Check the plant and Standard Purchasing Orgainsation assignments.
    While posting the 411K system generated the accounting document or not?...
    Please check it the above settings ..
    Also check what material type have you posted in 411K?
    With Regards,
    Thiru

  • Consignment Info Record Conditions..

    Hi Guys,
    My client has a requirement where, a particular Vendor has given them 10% discount for all of the Consignment items.
    So what i did was, i went to the Info Record, edit the condition validity period to a new period starting today, and i inserted condition RA00 (discount % on net) of 10 %.
    From the Info Record screen Purch Org Data 1, i can see the updated price in Net Price field.
    Now when i simulate the scenario where i did PO --> GR --> GI --> MRKO, during GI and MRKO it is still taking the full amount and not the discounted amount,
    Any ideas guys?
    Would appreciate the help.

    HI,
    1. Attach your pricing procedure to RA00 in m/06.
    2. check in Std purchase organisation in SPRO in enterprise structure.
    3. check your pricing procedure is attched to std Purchase org or not .
    Hope Help U !
    Regards,
    Pardeep malik

  • Consignment info record

    Hi
    Thanks for your quick reply. 
    My question is system is picking the old price which we had entered the net price while creating the info record.
    After a month we are consuming the material and now price has been changed.
    In Consignment settlement, vendor will get the market price.  ok,  so, where I have to do this customization.
    Please help.

    Hi Kishore,
    you have to update your Info records with new market price.
    then run MRKO to settle liablity.
    hope the system will pick the updated mat. rate.
    if you are not allowed to change the rate in info records , then create the new one and set the old info records with back dated so that whenever you will run the transaction to settle the vendor liablity, system always pick up rate of mat. from new info records.
    hope it will help.
    manoj singh

  • Consignment info record issue

    hi friends,
    while  doing consignment , I am getting the folowing error
    "purchasing info record not found in pur organization 1000"
    I am not using  pur org 1000  and i maintained info record as per my pur org only.
    thanks
    raj

    HI
    If several purchasing organizations procure for a certain plant, you must define one of them as the standard purchasing organization for the transactions "pipeline procurement", "consignment" and "stock transfers".
    Use the following path
    Enterprise Structure: Assginment: Materials management: Assgin standard purchase organisation to plant.
    In your case youmust have defined your purchase organisation as standard purchase organisation.
    regards
    girish

  • Price changes in Consignment info records

    Hi
    Is there any standard transaction to change the prices in the purchasing info records site (plant) wise on daily basis? e.g. 5000 info records are there and i want to change the prices in the info records site wise.
    I don't know the rate of the material. I come to know daily morning e.g gold rates changes everyday.
    I can change the rates in one shot through MEKP with condition type PB00. But gold rates differs from place to place e.g. Delhi to Mumbai. So i need to change price site wise according to bombay stock exchange or national stock exchange rates. Basic idea is to change the prices site(plant) wise.
    Please suggest.
    Thanks & Regards
    Kapil

    Hi
    We can change the rate through Info record Mass Maintenance
    T.code : MEMASSIN
    Regards,
    Senmani.

  • Material costing - consideration of consignment info records

    Hi All,
    within material costing, it is possible to get material prices of components by reading the purchasing inforecord ( transaction OKK4, see possible values of strategy sequence ). My problem is: SAP standard does only consider standard inforecords, but no consignment inforecords. I got an answer on an OSS-quest saying that this can be only acchieved by a modification. Does anybody know the right place for this modification, or is there a suitable enhancement I could use?
    Thanks in advance,
    Andreas

    Hi Andreas,
    Could you please give details in how did you use Userexit COPCP005?
    Kind Regards!

  • Synchronize info record with standard & consignment type

    Because SAP cost estimate can only adopt standard and sub-contract info record price, our end users ask us to maintain standard info record automatically by SAP when buyes maintain consignment info record. Is it possible to do it by IMG or any enhencements? Or someone has any better ideas for cost estmiate regarding consignment inf record?
    Thanks a lot.

    Dear Sarita,
    I need link the informations, number info record with condition type and validity, in tables KONH  I can  take codition type and valid from / to, but I need link with specific info record, I not to get to see any to link form these information by tables KONH to do it.
    Can I explain more details this process??
    Thank you very much for your  help.
    Armando

Maybe you are looking for

  • Enable reporting of offensive content not working in sharepoint 2013 community site

    i am trying to enable "Report to moderator option" in community site but when i checked option "Enable reporting of offensive content" in a community site settings and clicked Ok. I am getting an error "The file is not checked out.You must first chec

  • OBIEE 11G - Double column (Descriptor Id)

    Hello All, I have a problem in implementing Descriptor ID functionality. I have a time dimension, for which i am using Year, Period Name and Period Number. I have placed Period Number as Period Name ID column and in the report i am using the period N

  • Disc utility not burning since latest upgrade

    The latest daylight OS 10.4.8 upgrade has somehow disabled my DVD drive to recognize a blank disc when trying to burn a .dmg from the disc utility. I've ran disk repair permission and restart, turned off OS 9 nothing seems to work. It seems that each

  • Packages, classpath in xcode

    hello, I've recently started using xcode (on Mac OS X) to develop java apps. I want to include a package or just some indiviudal classes, but don't know how. How do you specify the CLASSPATH in xcode? I've tried putting them in ~/Library/Java/Extensi

  • ITunes won't alphabetize artists correctly

    So this is a brand new computer. Downloaded iTunes and started transferring my songs from my other computer onto this one via a 4 GB flash drive. I did the first batch (artists A-C) and the artists are not alphabetized correctly. Yes, I've clicked th