Multiple COO per one handling Unit

Hi ,
can you please let me know Multiple COO per one handling Unit
here is the examlpe ....
Parent - Line item 10 ball 58 High level item 10 counter of orgin india
component Line item 20 bat 59 High level item 10 counter of orgin europe
component Line item 30 cover 60 High level item 10 counter of orgin china
today we dont have any bom explosion.so, we only have item 10 on the sales order . but need to include Country of Orgin on all items .
how we can do in configuration?
Thanks

>
devd1011 wrote:
> Hi ,
>
>         here is the examlpe ....
>
>         Parent - Line item 10 ball 58 High level item 10   counter of orgin india
>         component Line item 20 bat 59 High level item 10 counter of orgin europe
>        component Line item 30 cover 60 High level item 10 counter of orgin china
>
> today we dont have any bom explosion.so, we only have item 10 on the sales order . but need to include Country of Orgin on all items .
this looks like sales bom, but not like a handling unit.
A handling unit would be if you have 3 items in a sales order and pack them via Edit > Packing Proposal.
if you only have 1 item in the sales order, then you can only mention different Country of origins in a long text

Similar Messages

Packing multiple materials in one Handling Unit

Dear Friends,
In an outbound delivery, I want to pack 8 materials in one single External Handling unit.
How should I use this?
Presently I am using BAPI_HU_PACK 8 times to do this in a loop & passing the same HU in parameter
BAPIHUKEY-HU_EXID for all the time but with ITEMPROPOSAL which is different all the time.
Is this the right way to pack multiple materials in the same HU?
Please share your experience..
Thank you.
Regards
Prashant

Hi,
Please explain a little more clearly.
Do you have an existing HU and you just want to assign it to the delivery or you want to create the HU also.
Please check how it is executed when working online.
HU that you want to assign to the delivery should have same/equal materials as that what we have in delivery.
Please check this out.
Regards,

Pack two or more Outbound Deliveries into the one Handling Unit

Hi Gurus,
I'd like to, sometimes, pack two or more Outbound Deliveries into the one Handling Unit, can anyone please advise how this can be achieved.
Thanks in advance

Hi Simon,
there's no way you can do that, the HU is owned by the delivery, so the relationship is one to one.
In order to be able to pack items coming from multiple deliveries into the same HU/HUs you'll have to use Shipments: basically a shipment is made of deliveries and HUs are owned by the shipment, that way you would be able to achieve your result.
Pls. reward if useful.
Best regards,
Enrico

Mixed materials in one handling unit

Dear all;
I need your help about packing.
We are going to use packing in sales delivery. We need to pack items automatically using packing instructions and packing proposals, but we need to pack different materials in one handling unit. For example we need to put A, B, C materials in one packing material.
System can decide the packing material quantity using packed material quantity (we can use the same unit for all materials), weight or volume.
I'll be pleased to hear any solution about that.
Thank you in advance.

Please use search forum -
FYI
[1 Material into 2 packing Items;
Afetr enter in to Packing screen you can find Material ,Partial qty and Total quantity colomuns under Material to be Packed screen.
here you enter 10 in Partial qty colomun then click on per part. qty push button now system will ask Should system search for allowed packing material? you select Yes now system will pack the 100 qty in to 10 boxes and each will have 10EA.
( system displays the availablae pack material- you can choose this mat - for 3 diff materials)
hope it helps

One handling unit wrongly updated to the delivery out put

Hi gurus,
Internal handling unit number is showing delivery document number in table *vekp* but real handling unit contains no delivery document number and shipping point. Could any one guide me how to find out the delivery document of this handling unit.
advance appreciations to all

use t code HUMO , give the hU nad execute , display u will get the delivery doc numbet rt side end top
rew

Two serial numbers assigned to one Handling Unit???

Hi All,
I've a handling Unit HU 1000XXXXXX - correct in SAP with XYZ material with a serial number. But also another unit ABC has a different serial number also in some way tied to Handling unit 1000XXXXXX. This is an MTO for a sales order. Not able to understand how the other serial number is also assigned to the same HU.
Please suggest me to identify the root cause behind this.
Regards,

Hi,
You posted qty 2 with serial number's
Now you have stock of 2 qty with serial number
when you do delivery, you have to assign serial number which is already in stock.then it will show status properly
Remain qty 1 and 1 serail number.
Kapil

Handling Unit with multiple batches

HI,
Is it possible to create a Handling Unit with multiple batches, when packing a Handling Unit in a Production Order (COWBPACK)?
Thanks

When I create a packing instruction (transaction POP1), I can set indicator "Indicator Batch Mix Allowed".
Explenation:
If this indicator is set, then several batches of the same material may be packed in one handling unit.
Otherwise, only one batch may be packed.
Use
When determining the packing status, the system checks for batch mix violation.
But I still can not create an HU with different batches.
Can anyone help me?

Create Handling unit after receiving finished goods

Hello,
My client's requirement is that they do not want a TR or TO to get created at the time of Production order confirmation and neither they want to create the Handling unit at the time of confirmation.
They want to move the material from production to warehouse as one Handling unit after multiple confirmations. They want to create Handling unit manually after the receipt of materials.
What is the process of creating Handling unit after we have FG (multiple batches).
After creation of Handling units, my client wants to ship the same Handling unit out to customer.
How to create Handling unit
Regards
Prabhjot Singh

Dear
Please Follow this Steps
Process Cycle:
1)Create Material with WM View in Material Master (MM01)
2)Crearte Purchase Order(ME21N) consult MM
3)Release Purchase Order(ME29N, ME28)
4)Goods Receipts (MIGO)
5)Creating Transfer Request (note:- this will come Automatically while doing G/R)
6)Create Transfer Order (LB13)
7)Confirm Transfer Order (LT12)
10)Check Stock Overview in Warehouse (LS24)
Goods Issue Process from Warehouse:
1)Create Reservation (MB21)
2)Goods Issue W.R.T Reservation (MIGO)
3)Create Transfer Order (LT06)
4)Confirm Transfer Order (LT12)
After Doing all This Steps In MMBE At Stock Requirement List Click on the Selected Stock and Right Click u can See the WM stocks And Handling Unit
with Regards
Pushpalas

Create Handling unit after receiving finished goods from production

Hello,
My client's requirement is that they do not want a TR or TO to get created at the time of Production order confirmation and neither they want to create the Handling unit at the time of confirmation.
They want to move the material from production to warehouse as one Handling unit after multiple confirmations. They want to create Handling unit manually after the receipt of materials.
What is the process of creating Handling unit after we have FG (multiple batches).
After creation of Handling units, my client wants to ship the same Handling unit out to customer.
How to create Handling unit
Regards
Prabhjot Singh

Hi,
If I understand right - customer wants a simple transfer of finished goods from production to warehouse, and latter pack into handling units.
Possible scenario:
1) Assign production order to non-WM and non-HU storage location. Post GR for production order using transaction MIGO (mvmt. type 101) for a whole quantity produced for production order.
2) Setup packing table in IMG (Logistic General > Handling Units > General > Setup packing table> ...) --> packing table is a functionality for packing goods into HU - it takes goods from predefined source non-WM/non-HU location, packs them into HU and places them in target WM-HUM location.
2) Maintain packaging instruction (trans. POP1 and POF1) to automate the packaging quantities.
3) Run packaging table by HUPAST, select your table and pack.
4) Packed HU ends up on WM-HUM location.
This process can be done either in SAP GUI (HUPAST) or you can build it in RF transaction and run it with mobile RF scanner (ABAP development required).
Hopefully this will be of any help.
Regards, Primoz

MTS with batch management, serialization and Handling unit

Hello All,
I am testing a scenario for MTS with batch management, serialization and Handling unit for discrete manufacturing.
Everything worked fine till I created the Handling unit for the finished product.
The production order has a quantity of 3 EA.
It has three serial numbers 1, 2 and 3. (serial numbers can be displayed from order->Header->serial numbers)
I created one Handling unit for production order quantity of 3 EA.
I tried to do a goods receipt for the production order using transaction COWBHUWE.
I get the following error when I try to post the GR:
Only 0 serial numbers entered instead of 3
Message no. IO304
Diagnosis
There is a serial number obligation, so the number of serial numbers must equal the number of serial numbers in the material document.
You can post the operation only if you entered the correct number of serial numbers previously.
System Response
Depending on the context in which the error arises, the system continues processing, or the required function cannot be performed.
Procedure
You have the following options, for example:
Check that the serial numbers are entered fully.
If necessary, display an error log.
If necessary, contact your system administrator.
What did I miss?
How to fix this problem?
Please help.
Thanks in advance
George

I added the serialization procedure HUSL to the serial number profile and it fixed the problem.

Handling Unit related query

Hi Experts,
i have doveluped one output type Z113 for Vl74 tcode previously one of my colouge was created Z111 and Z112 for same program and form for both output types i was changed the form name and program name for my output type if i use my output type in vl74 tcode it comes to the message no initial data is pocessing if assign the one handling unit no for this output type its exicuted but its not comes to the out put.
plea suggest me urgent.
regards,
sri.

HI
I THINK THIS FOLLOWING STEPS WILL SOLVE UR PROBLEM
1 .ASSIGN THE OUTPUT TYPES TO THE TRANSACTION .
TCODE VL02N --->
GIVE THE DELIVERY ORDER NO--.
PRESS ENTER
GO TO EXTRAS -> DELEIVERY OUTPUT->HEADER
GIVE THE OUTPUT TYPE
PRESS ENTER
SAVE
GIVE DEFAULT PRINTER NAME
SAVE
THEN GO BACK TO DELIVERY WINDOW
THEN
FROM THEMENUE BAR --> OUTBOND DELIVERY
ISSUE DELIVERY O/P
SELECT THE O/P TYPE
PRIN PREVEIW.
U WILL GET THE OUTPUT
REWARDS IF HELPFUL
SACHHIDANANDA

FM for reversal handling unit

Hi All,
I am using SAP version 4.6c.
I am using T.code MFHU to declare one handling unit.
I want function module to reverse the handling unit which is declared using MFHU transaction.
Thanks in advance.
points assured.
Krishna Yerram.

Please go step by step process of finding a BAPI or a function for a transaction below
Suppose you want to find the bapi for creating a sales order, you usually use transaction VA01 for this.
1. Find out the package of the transaction.
Start Va01 go to system --> status.
Double click on transaction
Package is VA
Open this package in SE80
Open business engineering-->Business object types
Find the BO which sounds the most appropriate
I would suggest BUS2032 Sales Order
Double click.
Open methods.
Find the released method with from data or something similar in the name
, Createfromdat2
Position the cursor in it and click the program button
Scroll down to find the bapi used in this method
With this way you can also find out programs and FM's
2. Start va01 go to system-->status
Double click transaction VA01
Double click on package
Read the application component. (this is SD-SLS Sales)
Then open the transaction BAPI
Sales and distribution>Sales>sales order
createfromdat2

Need help for multipule handling unit get printed out

Hi ,
I have multipule handling unit in case of issuing the output for selected multipule handling unit using output type . I am getting one handling unit to be printed out . Please can u suggest any configuration is recquired to get selected printed out all the select handling assigned to output type
Any configuration is recquired to get printed out .
process followed .
give DO no for vl02n (tcode) and then pack from the menu we get handling unit need to be selected 3 or 4 handling unit then go to extra's and select output given here output type and save it .Then in nace i got only one handling unit.

You can use the t-code VL74 for printing handling unit output.

Destructive Testing Handling Units

In our plant, handling units are created for a material at the time of the inbound delivery. If I receive 100 PCs of a material, let us say one handling unit is created in the system.
In the inspection plan for this material, I have maintained one of the MIC with destructive sample indicator. When the usage decision is being performed I want to post the sample size corresponding to the destructive characteristic as scrap. For example if i received 100 PCs into quality stock, i want to post only 95 PCs into unrestricted use stock as 5 PCs was used in the destructive testing. However in the stock posting screen I only have one line corresponding to the handling unit containing 100 PCs. How do i post 95 PCs of this handling unit into unrestricted use stock and 5 PCs as scrap.
Thanks in advance.

Hi ,
Even thoug you wish to take only 95 in to unrestricted stock , to keep the MM transaction with the vendor to be simple, you have to accept the etire lot of 100 in to stock ( assuming that the cost of samples used for testing is to be bourne by your company).
Then , since you have issued 5 to distructive testing ,which are consumed in the testing process , it shall be booked as consumption for quality inspection.
This is standard SAP recommendation. Check for the appropriate movement type.
Regards
Raghuramam.

Simple Storage unit management by using of 'real' handling unit data

Hi all,
actually we have a WM setup to use the full handling unit management in Warehouse. After some years we detected that the HU managed
Warehouse is not the best solution for our business.
Inside of WM we do no more want to have the Handling units. The assigned storage location is not HU managed.
Now to my question:
We receive from other plants finished goods via inbound delivery. All goods are packed on Handling Units.
When doing the good receipt, Is it possible to use the HU data (vekp, vepo) and create according to it the WM storage units? So one Handling unit
from the inbound delivery will become one storage unit.
thanks in advance for your answers.
Michael

Hi Patrick,
we actually have SAP WM with HU management running. but we want to go back to WM without HU management - only with the storage unit management.
when getting an inbound delivery from another plant (in the same client) goods are batch managed and packed on HU´s. i am searching for a possibility to use the HU data from the inbound delivery to create the WM storage units. So one HU should become one WM storage unit.
so i will post to an ERP comuity.
thanks
Michael

Multiple COO per one handling Unit

Similar Messages

Maybe you are looking for