Multiple copies of one photo in Aperture

Hi,
I have just bought Aperture, and I'm dying to get started. However, a very basic thing annoys me quite a lot. I would like to make an Album with photos I can perform experiments on, but no matter what I do, the changes also apply to the "originals" in the Event from which they were taken.
Isn't there an easy way to have multiple copies of the same photo in Aperture? I guess the solution must be simple, but I just can't figure it out.
Thanks,
Michael Knudsen

Michael,
Either use the Command to Duplicate Version, or New Version from Master depending upon whether your experiment needs to start with the latest edited version, or from the scratch position of the Master. Then you can either Remove the original version from an Album if already there, or move the new version it to a new Album as desired.
Ernie

Similar Messages

HOW DO I PRINT MULTIPLE COPIES OF ONE PHOTO ON A SINGLE PAGE?

Since Apple has not made this feature available, I am not able to print multiple copies of a single photo on one page. HELP suggested I download Portraits and Prints which I could use for free. However, I have downloaded this and note that DEMO watermark will appear on all photos unless I purchase the program. Is there a way to print without the DEMO watermark using this program or is there another free program that will allow me to print multiple copies of a single photo on a single page? Please help as I have spent 2 hours on the phone with Apple and it has gotten me no closer to a solution - something I could easily have done on the older versions of I Photo. Thanks!

Sadly, I have no pull down menu when I click on Customize or settings? I am using IPhoto 08 vers. 7.0.1. I was told by Apple HELP that this feature is not yet available, even though the instructions say to do exactly what you have said. But there is no pull down menu and no option to print multiple photos. It says print a single photo and it is clicked and I cannot unclick it. Any help would be appreciated. Do you actually have a pull down menu with Print Multiple Copies of One Photo as an option? What version of IPhoto provides this? Apple seems to think it is not available and it certainly isn't available on my system. Any help will be appreciated. Thanks.

Printing multiple copies of one photo on one sheet

Since I don't find this on the forum, I must be the only one who can't figure out how to do this, but before I upgraded, when selecting "print", I could also select how many photos per page, and I could print out one page with more than one copy of a photo. For example a whole sheet of wallet size, or two 5X7s on the same sheet. I can't find this selection option any more. Where is it?
Thanks,
Quonkeree

If you go back there is a solution (workaround) that as I remember involves picking the photo you wnat to print multiple copies of and other photos to bring the count up to what you want to print (2, 4, 9 etc) then somewhere down the way in the print process replacing the photos you used a placeholders with the one you want to print giving you multiple up of the same photo - I have NOT done this but it was described sometime recently on this forum - try a search
Larry Nebel

How do you print multiple copies of one photo on a page in iPhoto '08?

I've tried everything that I can think of, yet no success.
It used to be so easy in '06! As you changed the settings for n-up, it would show you a live preview as well!
Has anyone found a solution to this? If it is not possible, it is a GLARING omission.
Thanks for your help.

Flugel:
Welcome to the Apple Discussions. That feature has been dropped from iPhoto. You'll have to use a 3rd party application like Portraits and Prints that should be able to do what you want.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Message was edited by: Old Toad

How can I print multiple copies of same photo onto one page on iPhoto 9.5.1?

How can I print multiple copies of same photo onto one page on iPhoto 9.5.1? I was able to do it on the old iPhoto, but can't seem to be able to do it on the new iPhoto. Grrr...

Photos does the same thing.... Only workaround I can come up with is to create a template in Pages and copy & paste.

Using camera accessory, I have imported photos to my iPad 3rd generation. By mistake I have imported multiple copies of same photos. Now if I want to delete additional copies I can't. It gives me only one option "Delete everywhere" instead of delete 1copy

Using camera accessory, I have imported photos to my iPad 3rd generation. By mistake I have imported multiple copies of same photos. Now if I want to delete additional copies I can't. It gives me only one option "Delete everywhere" instead of delete one by one, so that I can keep one copy of that photo.
Is there a way to delete additional copies of a photo and keeping only one?

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

How to print multiple copies on one page ?

How to print multiple copies of one document on one page ?
in coreldraw I used to make the document -for example a business card 5x9 - and when sending to print it automatically placed the number of cards that would fit in my A4 sheet.
how do I make the same operation in Indesign.
thanks

Hi, Peter S.
>I can see that as a shortcut to printing a page of different cards for multiple people, but to do a simple n-up of a single card it seems overly complex to me. What am I missing?
* It's just an alternative to copy/paste and step/repeat.
* For a one-time only use, perhaps it's a little more complex than necessary. But for any future needs, only the content of the data file needs to be changed, either by editing, or by pointing to a new data file. If different cards for multiple people becomes necessary, it's ready to go.
Regards,
Peter Gold
KnowHow ProServices

Why did using i cloud back up save multiple copies of my photos and sync photos from my iphone that i cant delete?

why did using my i cloud back up save multiple copies of my photos and sync unwanted photos from my computer?

I did that, and it did not work. But I will try it again.
EDIT* Finally!!! I have done this several times, and it hasnt worked. You comment that I should do that and it works.
thanks

Problems with multiple copies of each photo

I'm relatively new at using Photoshop Elements and when I was moving my photos from my old computer to my new one using an external hard drive I got multiple copies when I uploaded them to my new computer. How do I avoid this?
I think that I had the same photos in diffrent files on the external hard drive and thus got them four times on my new computer. Do I need to sit and erase them by hand(it's 13 000!!) or what do I do. I cann't just let them be, they take up way too much space on the computer.
How do I do not to make the same mistake again the next time I need to move them?
This probably is a silly problem when you are used to the program but we are all beginners some time I guess! Hope you can help me...

You can stack the duplicate images and delete the stack.While deleting the stack, application asks which photos present in the stack you need to delete. The stack can be formed from automatically suggest stacks and then you can stack them at one place. You can try this thing first with a small group of images.

Why do i see multiple copies of same photos, photo stream and camera roll

Photos on my wife's iPhone 5S take up a lot of space ( iCloud memory full, can't update phone). It How do I trim it down? I moved a lot of her shots to my macbook, then deleted most of them (except the ones she wanted available) but it didn't seem to help.

Is your question about multiple copies of photos or about trimming down the amount of memory your photos are taking up?
Photo Stream only takes up a small amount of storage since it is primarily housed in iCloud.
Camera Roll photos can be imported to a computer and deleted from the device.
When you say multiple copies, do you mean the same photos in Camera Roll and Photo Stream? If so, then you need to understand that every photo you take on your device will be seen in both the Camera Roll and in Photo Stream. They serve two different purposes. The Camera Roll is where your actual photos go and are stored on your device. These are the photos you import to your computer.
Photo Stream is where photos taken from any device signed onto the same iCloud account and that have Photo Stream turned on all go. That way, you can see photos on your iPhone that you took on your iPad and vice versa. But again, these photos are stored in iCloud and take up very little memory on your device.
Cheers,
GB

Multiple copies of same photo on same page seems to assume A4?

I'm trying hard to work out how to print out multiple copies of the same picture. I want to get 2 copies on each 4x6" sheet of photo paper and have followed all the steps...
Selected 1 picture, hit print, went to Settings, selected "Multiple of the same photo per page".
I then went to Print Settings, selected Borderless 4x6 (yes, the printer works fine with that usually - HP Photosmart C4280) and set the Print Size to 2x3 and the preview shows the 2 copies of the same photo side-by-side no problem.
So I hit OK, clicked on Print and...
It's not aligning with the left hand side of the 4x6 - it's not respecting the selected paper size. If I put in a sheet of A4 to test, the 2 pictures come out in the centre of the page (in the requested size). So as a result I can't print on the 4x6 paper as most of the picture gets printed on nothing!
Am I doing something wrong or is this some kind of bug in either iPhoto or the HP printer driver? Anyone had any success with this? If so, what kind of printer were you using?

Jemster:
Here's the workflow I used to get 2 2x3s on a 4x6:
1 - select photo & click on print button
2 - select 4x6 borderless and 2x3 print size
3 - click Customize button
4 - click on settings button
5 - select "Multiple of same photo per page" (after clicking OK two photo are shown on the preview)
6 - click on the Print button.
Where I differ is that I don't go back to Print Settings to select the 4x6 paper size after Step 5. Give that a try.
NOTE: Do a Print to PDF to check it out instead of printing on paper. That will save some paper in case it doesn't work.
That gives me two photos on the 4x6. I'm using a Canon i850. I also get the same results with an Epson R280.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

How do I order prints from more than one Photo in Aperture?

I can figure out how to order prints through Apple for ONE photo but can't find how to add more photos to the order. Is there a manul for Aperture 3.4.5 version? This whole program has me confused. I need a manual I think. Thank you.

Have a look under the Help menu there's a link to the manual there.
But the easist way: make an album with the pics, then select all and order those.

How do I print multiple copies of same photo on one page in iOS?

Printing from iPad 3... IPhoto doesn't give me an option to print 2 copies per page. Anybody know a workaround or app that will do the trick?

Photos does the same thing.... Only workaround I can come up with is to create a template in Pages and copy & paste.

Need help in printing multiple copies of same photo on one sheet

i have PE8 installed and i am trying to print 10
small photos on a 4 x 6 piece of photo paper.
i have tried several set up options, but have not been successful
can anyone offer some suggestions?

In PSEv.8, Editor, go to File>print>#4 Select type of print>contact sheet.
You will be directed to the organizer. In the dialog, select paper size, and the layout.
Another way to do it is to do the math to figure out how many pictures will fit on the 4x6.
Crop you picture accordingly.
Open a new, blank file, 4x6
Copy picture, paste the picture 10 times. Each rendition will be on its own layer.
Position with move tool.

User in multiple groups gets multiple copies of one mail

I have a user who is the manager in a department with multiple groups in it. There is an email group in eudora set up for each administrative group (logical), and the manager's user is in each of those groups (also logical). Frequently it will be logical to send an email to 2, 3 or 4 of those groups, and then (just as you would expect) she gets 2, 3, 4 copies of the email in her inbox. Which falls into the "just what we asked for but not what we want" category...
Does anyone know how to get mac mail or eudora to do "de-duplicating" ? Or are we just stuck with this?

Hi..
Ok, so forget group mapping from AD. What you have here are two seperate network services that require individual provisioning... what I call "Service Differentiated Provisioning"
This is where Shared RADIUS Authorisation Profiles come in (I know because I deisgned them :)
Create a NAF for each device - simplest by using their IP addresses.
Next create two shared RACs - one for each service (mobile & home). Inside use RADIUS attributes to assign the ip pool depending on your RADIUS vendor (Cisco?)
eg cisco-av-pair = ip:addr-pool=poolA
Next create the two NAPs - one for mobile access and the other for home access by selecting the appropriate NAF to activate on. Select the authentication types (MSCHAP) and databased (Windows)
Next, edit the Authorisation part of each NAP. Uncheck the tick boxes "Include attributes from user & group records" - this will merge attributes from group, RAC and user... gets MESSY. Anyway you should see a default rule displayed "If a condition is not defined...." - in the Shared RAC dropdown select the RAC that is appropriate for the NAP (ie mobile or home). Then submit.
At this point to avoid clashes... remove any ip allocation settings in the ACS groups A & B.
You should now be able to authenticate users on each network service. They will still map to an ACS group (as before). However the ip pool allocation will now come from the relavent RAC instead of a group.
It may look complicated (um, guess it is) and the NAP pages are not very friendly, but if you work through these steps it should work a treat.
If you run CSRadius -z -p from the command line you'll see all the extra helpful debug I put in :)
Now all you need to do is download the trial of extraxi aaa-reports! (www.extraxi.com) so that you can generate reports to audit the fruits of your labours!
Good luck
Darran

Multiple copies of one photo in Aperture

Similar Messages

Maybe you are looking for