Multiple CS3 problems

Product Name: Bridge CS3
Operating system: Intel Dual Core
Kind: PC
4ghz Ram
Problem 1: When I open bridge CS3 I get this message:
This application requires an Intel Pentium 4
Intel Celeron, Intel Core duo or intel core 2
compatible processor. ( 0/6/5898 )
As mentionned in this message, I have a Intel Core 2 Duo 3ghz
4gRam
Windows Vista 64 bit operating sys
I don't know why I get this warning when I open my Bridge CS3.
Plus I tried to uninstall and reinstall, it didn't make a difference.
I tried to install it in the 64 Bit program files(not the program filesx86)
and it installs it back to program files x86, wich is 32bit.
Problem 2: I don't know how to attach an image in the thread, but my Preview window in Bridge CS3 is messed up, as if the *interactive sector*
of the preview image where you can click and zoom on any picture, was moved 1/3 on the right out of my computer screen. ( If I could upload an image it would be easier to understand ) Is there a way to put all the settings of BRIDE CS3 to Default by deleting backup files or something ?
Problem 3: In Bridge CS3 I cannot open CAMERA RAW by pressing ctrl+r, bridge doesn't react to my command, but it does for any other commande so it's not a keyboard problem because I can use the ctrl+c and v to copy in paste in photoshop. The only way to open Camera Raw is to double click on a RAW image, but what if I want to open a JPEG ? I searched for a `open` key in CAMERA RAW but I didn't see how I could open an image when Camera Raw was active.
I posted in Photoshop since it seems as an overall problem with Adobe Photoshop and other programs.
Thank You for you time.

> I posted in Photoshop since it seems as an overall problem with Adobe Photoshop and other programs
You would be better having a browse in the Bridge forum (see link on this page) and posting there.

Similar Messages

Cs3 problem printing with mavericks

cs3 problem printing with mavericks

Hello @arcticbear38,
Welcome to the HP Forums!
I understand you're receiving a small portion on the left hand side of a document missing on both printers. I will do my best to assist you! Does this happen when you print from one program or many program(s)?
Both of these printers are not indicating low on ink? I would recommend resetting the printing system on your computer by following this Apple document here. I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

Multiple Inheritance problem persists in Interfaces

Hi,
I tentatively made a program and found that multiple inheritance problem of C++ persists even with interfaces. Although this is definetely a special case but I want to know what is this problem known as( i know that this is perhaps known as diamond problem in C++). And is there a way out of this thing.
interface one
     int i=10;
interface two
     int i=20;
interface z extends one,two
public class xyz implements z
     public static void main(String [] a)
     System.out.println(i);
}O/P
D:\Education\Java\JavaStudyRoom\Applets>javac xyz.java
xyz.java:16: reference to i is ambiguous, both variable i in one and variable i
in two match
System.out.println(i);
*^*
*1 error*
Thanks for replying

suvojit168 wrote:
I tentatively made a program and found that multiple inheritance problem of C++ persists even with interfaces. Although this is definetely a special case but I want to know what is this problem known as( i know that this is perhaps known as diamond problem in C++). And is there a way out of this thing. This is not the so called diamond inheritance problem. What you have here is an ordinary name clash. And as has been noted you can resolve it by qualifying which constant you're referring to, like
System.out.println(one.i);
For the diamond inheritance problem to apply both the one and the two interfaces would need to inherit a common ancestor (that's how the diamond is formed). Furthermore the common anscestor would need to carry implementation which would then be inherited two ways, once via one and once via two. This is the diamond inheritance problem Java is avoiding by allowing single inheritance of implementation only.
P.S. My previous post was posted my mistake.

SP10 - multiple approver problem with CUP

We have SP10 (patch 1) in our development system and cannot move forward to production because of a real show stopper. I have currently reported this to SAP thru an OSS message (and it is in development) but would like to know if anyone else is having this issue with SP10. (this happened even before applying patch 1)
We have multiple approvers when creating NEW users or CHANGING users in CUP. We have it configured to allow just one of the approvers to approve before going on to the next stage. Since we put in SP10, CUP is requiring ALL approvers to approve the request before going on to the next stage. We get the following message when one of the approvers approve the request: Request no: 5020. is approved, pending for other Approvers.
I've seen this reported for UAR and SOD but not for CUP. In fact, there is a fix for UAR in Patch 1 of SP10. I applied this patch but it hasn't fixed the CUP issue. I also don't have the issue when rejecting a CUP request, or when approving it through the configuration --> Request --> Administration screen (what I consider the Back-door since only security administrators get the configuration area).
Thanks for your input.
Peggy

Christian,
I totally agree with you.
The good news is.... We installed SP11.1 and the multiple approver problem is fixed.
We have decided to leave our production system at SP8 until this system settles down a bit. Of course, this means we can't use many of the new fixes and features (such as UAR). We use our sandbox system to apply new support packs and do very rigorous testing. And our DEV system is at SP8 too.
Good Luck.
Peggy

L430 multiple driver problems (ultranav and others)

Hello,
I have multiple driver problems with my newly purchased L430.
1) After hibernate the UltraNav driver randomly stops working. This means that the settings are grayed out and my old settings aren't applied. Sometimes the mouse pad and track ball also stop working after hibernate.
2) The hardware mute button and hibernate don't like each other as well. After resuming from hibernate with the mute button on the sound doesn't work anymore. Rebooting only helps if you have disabled the mute before rebooting.
3) The intel usb 3.0 driver can't be installed unless you want a lot of bluescreens.
I do have the newest drivers and BIOS (2.54).

It's ok my friend, I just hope I will be able to help.
Now to the problem. The thing that worries me the most and the reason I asked you to contact a Lenovo Repair Center, is the blue screens with the Intel Usb 3.0 installation. If the driver is correct this should not happen and most of the times it signifies a pure hardware problem, not a software one. Really, it just should not happen, period!
So please, before anything else, download and boot with a Linux Live cd, any distro you like (e.g. Linux Mint, Fedora, etc). Better choose a 64bit version. It's one way of determining if you're facing a hardware problem with the usb 3.0 ports.
The information you give is very useful and more or less complete, but I would like to also know the model of your SSDs, both the 2.5'' and msata.
Meanwhile, you can check either with the Linux Live cd or with Memtest86+ your ram. This does not seem to be a memory problem but it would be nice if we could exclude it from the suspects list. Many - if not most - of these problems are multifactorial and we cannot leave anything to chance..
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Outlook Sync - Multiple Calendar Problem

(I am not sure whether this belongs in this Forum or would be more appropriately directed to my Device (Curve 8900) forum or Desktop Software. Please advise or re-direct if that is the case.)
I am having a sync issue with Outlook, and it revolves around the issue of having multiple calendars on the Device, each of which is associated with an e-mail address. I understand this has been a relatively common question; however, although I admittedly may be looking in the wrong place, I have yet to come across a comprehensive solution.
I understand how to switch the "default" e-mail associated with scheduling items on the calendar, and I believe I'm correct in thinking that this is what syncs with Outlook. I've noticed that when I try switching the default, Outlook wants to delete all other appointments which are NOT associated with that device calendar.
So I guess my specific questions are:
1) Is there a way to have Outlook sync with ALL calendars on the device, i.e. not just the default? It's easy enough to make all appointments from here on out with a single account & have that be the one that syncs; however, it doesn't seem possible to do that without having Outlook want to delete all other appointments.
2) Is there a way to change the associated email/calendar for events on the Device? When I open an event, I can see which email/calendar it is but I don't know how to *change* it -- I only seem to have a choice when scheduling new events.
If either of these was an option, I think that would solve my problem -- I could either go through the device & convert everything to the default email/calendar & everything would be there upon sync, OR Outlook would just pick up everything from all calendars when I sync.
I don't understand why it's so complicated to have everything in one place!
Thanks in advance to those willing to share their wisdom & advice in this matter.
mbw

I was going to post that article but you beat me to it.
I believe this is the only way to accomplish this on a BlackBerry
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

MULTIPLE ITEM PROBLEM IN VL31N BDC

hI FRIENDS ,
    I AM POSTING A BDC OF TRANSACTION VL31N ,ie FOR SCHEDULE AGREEMENT INBOUND DELIVERY.I CREATE A FUNCTIONAL MODULE OF THE SAME AND CALL IT FROM AN ASP PAGE,IN THAT THERE IS PO NUMBER 5500000986 WHICH HAS TWO ITEMES 62 AND 95 RESPECTIVLY OF SAME MATARIAL NUMBER R010230123041002 AND DIE NUMBER 2304P,NOW THE PROBLEM IS THIS BDC IS WORKING WHEN THERE IS ONLY ONE ITEM BUT GIVES AN ERROR "CANT CREAT INBOUND DELIVERY FOR PO NO ...' WNEN IT HAS MULTIPLE ITEM.WHAT SHOULD I DO ? I ALSO USED LOOP BUT IT ALSO DOSENT WORK AS IT WILL ADD ALL OPEN QTY OF PO 986 AND UPDATE AGAINST ITEM NO 95.
CODE IS AS FOLLOWS:.........
FUNCTION y_synie_bdcinbdly.
""Local interface:
*" IMPORTING
*"     VALUE(CTU) LIKE APQI-PUTACTIVE DEFAULT 'X'
*"     VALUE(MODE) LIKE APQI-PUTACTIVE DEFAULT 'N'
*"     VALUE(UPDATE) LIKE APQI-PUTACTIVE DEFAULT 'L'
*"     VALUE(GROUP) LIKE APQI-GROUPID OPTIONAL
*"     VALUE(USER) LIKE APQI-USERID OPTIONAL
*"     VALUE(KEEP) LIKE APQI-QERASE OPTIONAL
*"     VALUE(HOLDDATE) LIKE APQI-STARTDATE OPTIONAL
*"     VALUE(NODATA) LIKE APQI-PUTACTIVE DEFAULT '/'
*"     VALUE(EXTNID) LIKE MAKT-MAKTG
*"     VALUE(VENDORNO) LIKE LFA1-LIFNR
*"     VALUE(PONUMBER) LIKE EKKO-EBELN
*"     VALUE(ITEMNUMBER) LIKE LIPS-VGPOS
*"     VALUE(MATERIAL) LIKE MAKT-MAKTG
*"     VALUE(DLYQTY) LIKE LIPS-LFIMG
*"     VALUE(BTCHNO) LIKE LIPS-CHARG
*"     VALUE(POSLR) LIKE EKES-EBELP OPTIONAL
*" EXPORTING
*"     VALUE(SUBRC) LIKE SYST-SUBRC
*"     VALUE(INDELYNO) LIKE SY-MSGV2
*"     VALUE(MSG1) LIKE SY-MSGV1
*"     VALUE(MSG2) LIKE SY-MSGV2
*"     VALUE(MSG3) LIKE SY-MSGV3
*"     VALUE(MSG4) LIKE SY-MSGV4
*" TABLES
*"      MESSTAB STRUCTURE BDCMSGCOLL
*"      ERRTAB STRUCTURE YSYNERRMSGS
*"      INDLYTAB STRUCTURE YSYN_QTYTAB
Updated by ANAND SYNISE 19.1.2007
DATA: BEGIN OF bdctab OCCURS 0.
          INCLUDE STRUCTURE bdcdata.
DATA: END OF bdctab.
DATA: datenow(10) TYPE c,
        fldvar(30) TYPE c,
        fldno       TYPE i,
        flditoc(6) TYPE c,
        qty(13)     TYPE c.
DATA maxposnr LIKE lips-posnr.
DATA testposnr TYPE posnr.
DATA itemnoint TYPE i.
CONCATENATE sy-datum6(2) '.' sy-datum4(2) '.' sy-datum+0(4) INTO datenow.
CLEAR bdctab.
REFRESH bdctab.
PERFORM open_group      USING group user keep holddate ctu.
     CLEAR bdctab.
     bdctab-program = 'SAPMV50A'.
     bdctab-dynpro = '4007'.
     bdctab-dynbegin = 'X'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_CURSOR'.
     bdctab-fval = 'RV50A-VERUR_LA'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_OKCODE'.
     bdctab-fval = '/00'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'LIKP-LIFNR'.
     bdctab-fval = vendorno.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'LV50C-BSTNR'.
     bdctab-fval = ponumber.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFDAT_LA'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFUHR_LA'.
     bdctab-fval = '00:00'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-VERUR_LA'.
     bdctab-fval = extnid.
     APPEND bdctab.
   CLEAR bdctab.
     bdctab-program = 'SAPMV50A'.
     bdctab-dynpro = '1000'.
     bdctab-dynbegin = 'X'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_OKCODE'.
     bdctab-fval = '=MKAL_T'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_CURSOR'.
     bdctab-fval = 'LIKP-BLDAT'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'LIKP-BLDAT'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFDAT_LA'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFUHR_LA'.
     bdctab-fval = '00:00'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-program = 'SAPMV50A'.
     bdctab-dynpro = '1000'.
     bdctab-dynbegin = 'X'.
     APPEND bdctab.
   CLEAR bdctab.
     bdctab-fnam = 'BDC_OKCODE'.
     bdctab-fval = '=POPO_T'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'LIKP-BLDAT'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_CURSOR'.
     bdctab-fval = 'LIPS-POSNR(01)'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFDAT_LA'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFUHR_LA'.
     bdctab-fval = '00:00'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-program = 'SAPMV50A'.
     bdctab-dynpro = '0111'.
     bdctab-dynbegin = 'X'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_CURSOR'.
     bdctab-fval = 'RV50A-PO_MATNR'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_OKCODE'.
     bdctab-fval = 'WEIT'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-PO_MATNR'.
     bdctab-fval = material.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-program = 'SAPMV50A'.
     bdctab-dynpro = '1000'.
     bdctab-dynbegin = 'X'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_OKCODE'.
     bdctab-fval = '=POLO_T'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'LIKP-BLDAT'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_CURSOR'.
     bdctab-fval = 'LIPS-POSNR(01)'.
     APPEND bdctab.
*ADDED BY ANAND ON 22-01-2007
       CLEAR bdctab.
     bdctab-fnam = 'BDC_CURSOR'.
     bdctab-fval = ITEMNUMBER .     "ITEMNUMBER = LIPS-VGPOS
     APPEND bdctab.
************ENDED***********************
ADDED BY MILIND 19.01.2007
       CLEAR bdctab.
     bdctab-fnam = 'BDC_CURSOR'.
     bdctab-fval = poslr .
     APPEND bdctab.
*    ENDED * *
   CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFDAT_LA'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFUHR_LA'.
     bdctab-fval = '00:00'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LIPS_SELKZ(01)'.
     bdctab-fval = ''.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
   CLEAR bdctab.
     bdctab-program = 'SAPMV50A'.
     bdctab-dynpro = '1000'.
     bdctab-dynbegin = 'X'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_OKCODE'.
     bdctab-fval = '/00'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'LIKP-BLDAT'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_CURSOR'.
     bdctab-fval = 'LIPS-CHARG(01)'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFDAT_LA'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFUHR_LA'.
     bdctab-fval = '00:00'.
     APPEND bdctab.
     CLEAR bdctab.
      QTY = INDLYTAB-DLYQTY.
        qty = dlyqty.
     bdctab-fnam = 'LIPSD-G_LFIMG(01)'.
     bdctab-fval = QTY.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'LIPS-CHARG(01)'.
*     BDCTAB-FVAL = INDLYTAB-BTCHNO.
     bdctab-fval = btchno.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
   CLEAR bdctab.
     bdctab-program = 'SAPMV50A'.
     bdctab-dynpro = '1000'.
     bdctab-dynbegin = 'X'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_OKCODE'.
     bdctab-fval = '=SICH_T'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'LIKP-BLDAT'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_CURSOR'.
     bdctab-fval = 'LIPS-MATNR(02)'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFDAT_LA'.
     bdctab-fval = datenow.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'RV50A-LFUHR_LA'.
     bdctab-fval = '00:00'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
     CLEAR bdctab.
     bdctab-fnam = 'BDC_SUBSCR'.
     bdctab-fval = 'SAPMV50A'.
     APPEND bdctab.
CALL TRANSACTION 'VL31N' USING bdctab MODE 'N' MESSAGES INTO messtab.
subrc = sy-subrc.
PERFORM close_group USING     ctu.
CLEAR bdctab.
REFRESH bdctab.
IF sy-subrc EQ 0.
    indelyno = sy-msgv2.
ENDIF.
LOOP AT messtab.
    MOVE: messtab-msgid TO errtab-msgid,
          messtab-msgnr TO errtab-msgnr,
          messtab-msgv1 TO errtab-msg1,
          messtab-msgv2 TO errtab-msg2,
          messtab-msgv3 TO errtab-msg3,
          messtab-msgv4 TO errtab-msg4.
    APPEND ERRtab.
ENDLOOP.
LOOP AT errtab.
    SELECT SINGLE text FROM t100
      INTO errtab-errmsg
      WHERE msgnr EQ errtab-msgnr AND arbgb EQ errtab-msgid
      AND sprsl EQ sy-langu.
    MODIFY errtab.
ENDLOOP.
ENDFUNCTION.

Hi,
Check this code:
REPORT Z_CUSTOMER_UPLOAD .
              D A T A         D E C L A R A T I O N S                *
DATA:BEGIN OF IT_CUSTOMER OCCURS 0,
     KUNNR LIKE MV10A-KUNNR,
     VKORG LIKE MV10A-VKORG,
     VTWEG LIKE MV10A-VTWEG,
     MATNR LIKE MV10A-MATNR,
     KDMAT LIKE MV10A-KDMAT,
     MEGRU LIKE MV10A-MEGRU,
     SELKZ TYPE C value 'X',
     LPRIO LIKE MV10A-LPRIO,
     ANTLF LIKE MV10A-ANTLF,
     END OF IT_CUSTOMER.
DATA:BEGIN OF IT_success OCCURS 0,
     KUNNR LIKE MV10A-KUNNR,
     VKORG LIKE MV10A-VKORG,
     VTWEG LIKE MV10A-VTWEG,
     MATNR LIKE MV10A-MATNR,
     KDMAT LIKE MV10A-KDMAT,
     MEGRU LIKE MV10A-MEGRU,
     SELKZ TYPE C value 'X',
     LPRIO LIKE MV10A-LPRIO,
     ANTLF LIKE MV10A-ANTLF,
     END OF IT_success.
DATA:BEGIN OF IT_error OCCURS 0,
     KUNNR LIKE MV10A-KUNNR,
     VKORG LIKE MV10A-VKORG,
     VTWEG LIKE MV10A-VTWEG,
     MATNR LIKE MV10A-MATNR,
     KDMAT LIKE MV10A-KDMAT,
     MEGRU LIKE MV10A-MEGRU,
     SELKZ TYPE C value 'X',
     LPRIO LIKE MV10A-LPRIO,
     ANTLF LIKE MV10A-ANTLF,
     END OF IT_error.
DATA: L_INDEX TYPE SY-TABIX.
DATA:IT_BDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_DATA TYPE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
ERROR MESSAGE TABLE
DATA:IT_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : C_S TYPE C VALUE 'S',
        C_E TYPE C VALUE 'E'.
*DATA: IT_SUCCESS LIKE IT_CUSTOMER OCCURS 0,
     IT_ERROR LIKE IT_CUSTOMER OCCURS 0.
DATA : V_RECTOT TYPE I,
        V_RECERR TYPE I,
        V_RECSUC TYPE I.
              S E L E C T I O N - S C R E E N                      *
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER        : P_FILE LIKE RLGRAP-FILENAME .
SELECTION-SCREEN : END OF BLOCK B1.
           A T S E L E C T I O N - S C R E E N                    *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
to get F4 help for p_file
PERFORM F4_FILENAME USING P_FILE.
            S T A R T   O F   S E L E C T I O N                      *
START-OF-SELECTION.
Uploading data from flat file into it_tab
PERFORM BDC_UPLOAD USING P_FILE.
PERFORM PROCESS_DATA.
PERFORM POPULATE_BDC.
            E N D O F   S E L E C T I O N                           *
*END-OF-SELECTION.
PERFORM DISPLAY_REPORT.
*&      Form F4_FILENAME
      text
     -->P_P_FILE text
FORM F4_FILENAME USING    P_P_FILE.
DATA:L_FILE TYPE IBIPPARMS-PATH.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME        = SYST-CPROG
DYNPRO_NUMBER       = SYST-DYNNR
FIELD_NAME          = ' '
IMPORTING
   FILE_NAME           = L_FILE .
   P_P_FILE = L_FILE.
ENDFORM.                    " F4_FILENAME
*&      Form BDC_UPLOAD
      text
     -->P_P_FILE text
FORM BDC_UPLOAD USING    P_P_FILE.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
    FILENAME                      = P_P_FILE
    I_BEGIN_COL                   = 1
    I_BEGIN_ROW                   = 1
    I_END_COL                     = 8
    I_END_ROW                     = 1000
TABLES
    INTERN                        = IT_DATA
EXCEPTIONS
   INCONSISTENT_PARAMETERS       = 1
   UPLOAD_OLE                    = 2
   OTHERS                        = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " BDC_UPLOAD
*&      Form PROCESS_DATA
      text
--> p1        text
<-- p2        text
FORM PROCESS_DATA.
SORT IT_DATA BY ROW COL.
LOOP AT IT_DATA.
CASE IT_DATA-COL.
WHEN 1.
IT_CUSTOMER-KUNNR   = IT_DATA-VALUE.
WHEN 2.
IT_CUSTOMER-VKORG   = IT_DATA-VALUE.
WHEN 3.
IT_CUSTOMER-VTWEG   = IT_DATA-VALUE.
WHEN 4.
IT_CUSTOMER-MATNR   = IT_DATA-VALUE.
WHEN 5.
IT_CUSTOMER-KDMAT   = IT_DATA-VALUE.
WHEN 6.
IT_CUSTOMER-MEGRU   = IT_DATA-VALUE.
WHEN 7.
IT_CUSTOMER-LPRIO   = IT_DATA-VALUE.
WHEN 8.
IT_CUSTOMER-ANTLF   = IT_DATA-VALUE.
APPEND IT_CUSTOMER.
    ENDCASE.
ENDLOOP.
ENDFORM.                    " PROCESS_DATA
*&      Form POPULATE_BDC
      text
--> p1        text
<-- p2        text
FORM POPULATE_BDC.
DATA:L_COUNTER TYPE N,
         L_STRING TYPE STRING.
LOOP AT IT_CUSTOMER.
AT NEW KUNNR.
CLEAR L_COUNTER.
      L_INDEX = SY-TABIX.
      READ TABLE IT_CUSTOMER INDEX L_INDEX.
perform bdc_dynpro      using 'SAPMV10A' '0100'.
perform bdc_field       using 'MV10A-KUNNR'
                              IT_CUSTOMER-KUNNR.
perform bdc_field       using 'MV10A-VKORG'
                              IT_CUSTOMER-VKORG.
perform bdc_field       using 'MV10A-VTWEG'
                              IT_CUSTOMER-VTWEG.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
ENDAT.
L_COUNTER = L_COUNTER + 1.
    CLEAR L_STRING.
perform bdc_dynpro      using 'SAPMV10A' '0200'.
CONCATENATE 'MV10A-MATNR(' L_COUNTER ')' INTO L_STRING.
perform bdc_field       using L_STRING
                        IT_CUSTOMER-MATNR.
CONCATENATE 'MV10A-KDMAT(' L_COUNTER ')' INTO L_STRING.
perform bdc_field       using     L_STRING
                                 IT_CUSTOMER-KDMAT.
CONCATENATE 'MV10A-MEGRU(' L_COUNTER ')' INTO L_STRING.
perform bdc_field       using   L_STRING
                                IT_CUSTOMER-MEGRU.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
*-- For Page down in Call Transaction Mode
    IF L_COUNTER = 14.
      CLEAR L_COUNTER.
      PERFORM BDC_DYNPRO      USING 'SAPMV45A' '4001'.
      PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                            '=P+'.
    ENDIF.
perform bdc_dynpro      using 'SAPMV10A' '0200'.
CONCATENATE 'MV10A-SELKZ(' L_COUNTER ')' INTO L_STRING.
perform bdc_field       using L_STRING
                          IT_CUSTOMER-SELKZ.
perform bdc_field       using 'BDC_OKCODE'
                              '=SELE'.
perform bdc_dynpro      using 'SAPMV10A' '0300'.
perform bdc_field       using 'MV10A-KDMAT'
                              IT_CUSTOMER-KDMAT.
perform bdc_field       using 'MV10A-LPRIO'
                              IT_CUSTOMER-LPRIO.
perform bdc_field       using 'MV10A-ANTLF'
                              IT_CUSTOMER-ANTLF.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                    '/EBACK'.
at end of kunnr.
READ TABLE IT_CUSTOMER INDEX L_INDEX.
perform bdc_field       using 'BDC_OKCODE'
                              '=SICH'.
CALL TRANSACTION 'VD51' USING IT_BDC MODE 'A' UPDATE 'S'
      MESSAGES INTO IT_MESSAGES.
      CLEAR IT_BDC.
      REFRESH IT_BDC.
ENDAT.
IF NOT IT_MESSAGES[] IS INITIAL.
    PERFORM FORMAT_MESSAGE.
ENDIF.
ENDLOOP.
ENDFORM.                    " POPULATE_BDC
*&      Form bdc_dynpro
      text
     -->P_0273   text
     -->P_0274   text
FORM bdc_dynpro USING    VALUE(P_0273)
                         VALUE(P_0274).
IT_BDC-PROGRAM = P_0273.
IT_BDC-DYNPRO = P_0274.
IT_BDC-DYNBEGIN = 'X'.
APPEND IT_BDC.
CLEAR IT_BDC.
ENDFORM.                    " bdc_dynpro
*&      Form bdc_field
      text
     -->P_0278   text
     -->P_RECORD_KUNNR_001 text
FORM bdc_field USING    VALUE(P_0278)
                       VALUE(P_0279).
IT_BDC-FNAM = P_0278.
IT_BDC-FVAL = P_0279.
APPEND IT_BDC.
CLEAR IT_BDC.
ENDFORM.                    " bdc_field
*&      Form FORMAT_MESSAGE
      text
--> p1        text
<-- p2        text
FORM FORMAT_MESSAGE.
DATA: L_MSG(100).
LOOP AT IT_MESSAGES.
READ TABLE IT_CUSTOMER INDEX L_INDEX.
    CALL FUNCTION 'FORMAT_MESSAGE'
         EXPORTING
              ID        = IT_MESSAGES-MSGID
              LANG      = SY-LANGU
              NO        = IT_MESSAGES-MSGNR
              V1        = IT_MESSAGES-MSGV1
              V2        = IT_MESSAGES-MSGV2
              V3        = IT_MESSAGES-MSGV3
              V4        = IT_MESSAGES-MSGV4
         IMPORTING
              MSG       = L_MSG
         EXCEPTIONS
              NOT_FOUND = 1
              OTHERS    = 2.
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    write:/ l_msg.
ENDLOOP.
ENDFORM.                    " FORMAT_MESSAGE
reward if helpful,
keerthi

XML multiple targets problem

there is an example in oracle warehouse builder user's guide how to load xml file into multiple tables (1:N relationship).
Let's have an xml file:
<orders>
<order>
<id>1</id>
<items>
<item>
<product>a</product>
</item>
</items>
</order>
</orders>
but what if one day you get an xml file where an order has no items:
<orders>
<order>
<id>10</id>
</order>
</orders>
I get an error message: ORA-20011: Error occurred while loading source XML document into the target database object XXX . Base exception: No rows to modify -- the row enclosing tag missing. Specify the correct row enclosing tag.
What I want is to load in order table one row, and no rows in items table.
The xsl for this small example that makes a problem looks like (the rest is like in oracle warehouse builder user's guide example in C appendix):
<?xml version = '1.0' encoding = 'UTF-8'?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
<ROWSET>
<xsl:for-each select="orders/order/items/item">
<ROW>
<ORDER_ID>
<xsl:value-of select="../../id"/>
</ORDER_ID>
<PRODUCT>
<xsl:value-of select="product"/>
</PRODUCT>
</ROW>
</xsl:for-each>
</ROWSET>
</xsl:template>
</xsl:stylesheet>

Sounds like you've missed some tag from the files.
For XML processing I would look at leveraging XDB, see the post here;
http://blogs.oracle.com/warehousebuilder/2007/09/leveraging_xdb.html
Cheers
David

Suddenly, I've been put on multiple threads over multiple firefox problems, which is filling up my inbox. How do I get out of these?

Details? I posted a question about one problem (for which no answers have been offered, but that's okay) and somehow, I've become part of multiple threads about various firefox problems. I have no interest in any of these questions/problems.
How do I get out of these threads? I get about 15-20 emails a day! Firefox is by far the worst community I've even been dragged into....

Sorry you are having problems.
Have a look at your settings in the dropdown from the username or https://support.mozilla.org/en-US/users/settings
Not too sure what you could subscribe to accidentally that causes that behaviour though.
It would be interesting to know what option caused all the email. If something has gone wrong and you are getting e-mails that you should not be getting we can refer this to the admins to look into. The Firefox sumo community certainly does not intentionally spam, and if you are having a problem lets find out more, because others may have a problem and not have reported it.

Adobe Photoshop CS3 - Problem with Trial

I recently downloaded and installed Adobe Photoshop CS3 directly from Adobe as it is the latest version my Mac supports. Upon start up, I am greeted with two options: a) I have a serial number for this product. and b) I want to try Adobe Photoshop CS3 free for 30 days. Seeing how I am simply looking to evaluate and have not purchased said product, I selected option b.
However, upon clicking "Next >" I am greeted by an error. "Problem with Trial" I am left with nothing but wasted time. This is the first time I have ever installed Adobe Photoshop CS3 so I do not understand why it will only allow access with a serial number. Any help to allow me to try this software is appreciated.
Thanks.

Could the trial have a time bomb in it that prevents use after several years? There's not much of a need for Adobe to allow trials to run for so long after the product's life cycle has concluded.

Data template multiple selection problem

Hi all,
I have a problem with the Multiple Selection on the BI Publisher using data templates. One of my parameters is called p_application, this parameter is a integer/number and its values come from a list of values.
I'm getting the error "....invalid number". I think the data template is not understanding that this parameter have multiple selection.
Can you help me?
here is my data template
<dataTemplate name="user_reg" dataSourceRef="Thomson_Live_ EDC_Environment">
<properties>
<property name="include_parameters" value="false"/>
<property name="include_null_Element" value="false"/>
<property name="include_rowsettag" value="false"/>
<property name="scalable_mode" value="on"/>
<property name="db_fetch_size" value="20"/>
<property name="scalable_mode" value="on"/>
</properties>
<parameters>
<parameter name="p_customer" dataType="string" include_in_output="false"/>
<parameter name="p_application" dataType="integer" include_in_output="false"/>
<parameter name="p_start_date" dataType="date" include_in_output="false"/>
<parameter name="p_final_date" dataType="date" include_in_output="false"/>
<parameter name="p_staff_account" dataType="string" include_in_output="false"/>
</parameters>
<dataQuery>
<sqlStatement name="Q1">
<![CDATA[
select COUNT(DISTINCT TRUNC(a.TIMESTAMP)) days_logged
,COUNT(a.USER_ID) logins
,max(a.TIMESTAMP) last_access
,a.application_id application_id
,a.user_id user_id
from user_history_log a,
idweb_user b,
idweb_customer c
where to_date(to_char(a.timestamp,'dd-mm-rrrr'),'dd-mm-rrrr') between to_date(:p_start_date,'dd-mm-rrrr') and to_date(:p_final_date,'dd-mm-rrrr')
and a.user_id = b.user_id
and b.customer_key = c.customer_key
and c.staff_account = :p_staff_account
and ('0' in (:p_customer) or b.customer_key in (:p_customer))
and (0 in (:p_application) or a.application_id in (:p_application))
group by a.application_id, a.user_id ]]>
</sqlStatement>
<sqlStatement name="Q2">
<![CDATA[
SELECT IDCU.CUSTOMER_NAME "Customer name"
,PCAP.APPLICATION_NAME "Application name"
,IDUS.FIRST_NAME "First name"
,IDUS.LAST_NAME "Last name"
,IDUS.USER_NAME "Username"
,IDUS.EMAIL_ADDRESS "Email address"
,IDUS.ROLE "Job Role"
,IDUS.AREA "Job Area"
,IDUS.DEPARTMENT "Specific Job Area"
,IDUS.CITY "City"
,IDUS.US_STATE "State"
,IDUS.COUNTRY "Country"
,SALE.TERRITORY_NAME "Territory/GAM"
,BUUN.BUSINESS_UNIT_NAME "SBU"
,to_char(IDUS.REGISTRATION_DATE,'dd-mm-yyyy') "Registration date"
,to_char(PCCA.EXPIRY_DATE,'dd-mm-yyyy') "Expiry date"
,DECODE(PCUA.DISABLED,'Y','Disabled','Enabled') "Status"
,pcua.application_id application_id
,pcua.user_id user_id
FROM PC_USER_APPLICATION PCUA
,PC_CUSTOMER_APPLICATION PCCA
,IDWEB_USER IDUS
,IDWEB_CUSTOMER IDCU
,sales_territory SALE
,business_unit BUUN
,PC_APPLICATION PCAP
WHERE BUUN.BUSINESS_UNIT_ID(+) = IDCU.SBU_ID
AND SALE.TERRITORY_ID(+) = IDCU.TERRITORY_ID
AND IDCU.CUSTOMER_KEY = IDUS.CUSTOMER_KEY
AND IDUS.USER_ID = PCUA.USER_ID
AND PCCA.CUSTOMER_KEY = IDCU.CUSTOMER_KEY
AND PCCA.APPLICATION_ID = PCAP.APPLICATION_ID
AND PCAP.APPLICATION_ID = PCUA.APPLICATION_ID
AND NVL(IDUS.DISABLED,'N') = 'N'
AND IDCU.STAFF_ACCOUNT = :p_staff_account
AND ('0' in (:p_customer) or IDCU.CUSTOMER_KEY in (:p_customer))
AND (0 in (:p_application) or pcap.application_id in (:p_application))
ORDER BY IDCU.CUSTOMER_NAME, PCAP.APPLICATION_NAME, IDUS.USER_NAME ]]>
</sqlStatement>
<sqlStatement name="Q3">
<![CDATA[
select COUNT(a.TIMESTAMP) "Number of Turnaways Kickout",
MAX(a.timestamp) "Last Turnaway Kickout",
a.application_id,
a.user_id
from tpharma_user.user_refused a,
idweb_user i
where to_date(to_char(a.timestamp,'dd-mm-rrrr'),'dd-mm-rrrr') between to_date(:p_start_date,'dd-mm-rrrr') and to_date(:p_final_date,'dd-mm-rrrr')
and (0 in (:p_application) or a.application_id in (:p_application))
and a.user_id = i.user_id
and ('0' in (:p_customer) or i.customer_key in (:p_customer))
group by a.application_id, a.user_id ]]>
</sqlStatement>
<link name="ruser3" parentQuery="Q1" parentColumn="user_id" childQuery="Q3" childColumn="user_id(+)" condition="="/>
<link name="rapp3" parentQuery="Q1" parentColumn="application_id" childQuery="Q3" childColumn="application_id(+)" condition="="/>
<link name="ruser1" parentQuery="Q1" parentColumn="user_id" childQuery="Q2" childColumn="user_id" condition="="/>
<link name="rapp1" parentQuery="Q1" parentColumn="application_id" childQuery="Q2" childColumn="application_id" condition="="/>
</dataQuery>
<dataStructure>
<group name="G_totals1" source="Q1">
<element name="days_logged" value="days_logged"/>
<element name="logins" value="logins"/>
<element name="last_access" value="last_access"/>
<element name="application_id" value="application_id"/>
<element name="user_id" value="user_id"/>
</group>
<group name="G_main" source="Q2">
<element name="Customer name" value="Customer name">
<element name="Application name" value="Application name">
<element name="First name" value="First name">
<element name="Last name" value="Last name">
<element name="Username" value="Username">
<element name="Email address" value="Email address">
<element name="Job Role" value="Job Role">
<element name="Job Area" value="Job Area">
<element name="Specific Job Area" value="Specific Job Area">
<element name="City" value="City">
<element name="State" value="State">
<element name="Country" value="Country">
<element name="Territory/GAM" value="Territory/GAM">
<element name="SBU" value="SBU">
<element name="Registration date" value="Registration date">
<element name="Expiry date" value="Expiry date">
<element name="Status" value="Status">
<element name="application_id" value="application_id"/>
<element name="user_id" value="user_id"/>
</group>
<group name="G_main" source="Q3">
<element name="Number of Turnaways Kickout" value="Number of Turnaways Kickout"/>
<element name="Last Turnaway Kickout" value="Last Turnaway Kickout"/>
<element name="application_id" value="application_id"/>
<element name="user_id" value="user_id"/>
</group>
</dataStructure>
</dataTemplate>
on the XDO file, the parameters are:
<parameters>
<parameter id="p_customer" defaultValue="8c3ff6ad5eh5c8" dataType="xsd:string">
<select label="Customer: " valueSet="lv_customer" multiple="true" all="false" allValue="lov"/>
</parameter>
<parameter id="p_application" defaultValue="1" dataType="xsd:integer">
<select label="Application: " valueSet="LV_application" multiple="true" all="false" allValue="lov"/>
</parameter>
<parameter id="p_start_date" defaultValue="{$SYSDATE()$}" dataType="xsd:date">
<date label="Usage occurs on or after (dd-mm-yyyy):" size="11" format="dd-MM-yyyy" minValue="01-06-1950" maxValue="01-06-2100"/>
</parameter>
<parameter id="p_final_date" defaultValue="{$SYSDATE()$}" dataType="xsd:date">
<date label="Usage occurs on or before (dd-mm-yyyy):" size="11" format="dd-MM-yyyy" minValue="01-06-1950" maxValue="01-06-2100"/>
</parameter>
<parameter id="p_staff_account" defaultValue="Y">
<select label="Staff Accout: " valueSet="lv_staff_account" multiple="false" all="false" allValue="null"/>
</parameter>
</parameters>
Thank you,
Marcelo Cure
Oracle Developer
[email protected]
www.ilegra.com
Edited by: user11307652 on 09/03/2010 05:21
Edited by: user11307652 on 09/03/2010 06:15

I have a similar problem where i cannot use the parameter with comma separated values in the parameter.
my report definition is as below.
<dataTemplate name="COMLTRDATA" description="Data for the COMLTR letters" dataSourceRef="PRISM">
                    <parameters>
                         <parameter name="secondary_sequence" dataType="number" include_in_output="false"/>
                    </parameters>
                    <dataQuery>
                         <sqlStatement name="Q1">
                              <![CDATA[select     PR_LETTER_MASTER.LETTER_ID as LETTER_ID,
     to_char(PR_LETTER_MASTER.LETTER_DATE,'FMMonth DD, RRRR') as LETTER_DATE,
     PR_LETTER_MASTER.LETTER_NAME as LETTER_NAME,
     PR_LETTER_MASTER.ADDRESS_TYPE as ADDRESS_TYPE,
     PR_LETTER_MASTER.REVIEWED_FIRM_NUMBER as REVIEWED_FIRM_NUMBER,
     PR_LETTER_MASTER.REVIEWED_FIRM_NAME as REVIEWED_FIRM_NAME,
     PR_LETTER_MASTER.REVIEWED_FIRM_TYPE as REVIEWED_FIRM_TYPE,
     PR_LETTER_MASTER.REVIEWING_FIRM_NUMBER as REVIEWING_FIRM_NUMBER,
     PR_LETTER_MASTER.REVIEW_NUMBER as REVIEW_NUMBER,
         PR_LETTER_MASTER.SALUTATION as SALUTATION,
         PR_LETTER_MASTER.SIGNATURE_EMAIL_ID as SIGNATURE_EMAIL_ID,
         PR_LETTER_MASTER.SIGNATURE_TITLE as SIGNATURE_TITLE,
     PR_LETTER_MASTER.REVIEW_STATUS as REVIEW_STATUS,
     to_char(PR_LETTER_MASTER.REVIEW_COMMENCEMENT_DATE,'FMMonth DD, RRRR') as REVIEW_COMMENCEMENT_DATE,
     to_char(PR_LETTER_MASTER.REVIEW_DUE_DATE,'FMMonth DD, RRRR') as REVIEW_DUE_DATE,
     PR_LETTER_MASTER.REVIEW_YEAR as REVIEW_YEAR,
     PR_LETTER_MASTER.REVIEW_PROGRAM as REVIEW_PROGRAM,
         PR_LETTER_MASTER.REVIEW_TYPE as REVIEW_TYPE,
         PR_LETTER_MASTER.TEAM_CAPT_FIRM_NAME as TEAM_CAPT_FIRM_NAME,
     PR_LETTER_MASTER.PRIOR_REVIEW_NUMBER as PRIOR_REVIEW_NUMBER,
     PR_LETTER_MASTER.MNGPTR_MEMBER_NUMBER as MNGPTR_MEMBER_NUMBER,
     PR_LETTER_MASTER.FIRST_NAME as FIRST_NAME,
     PR_LETTER_MASTER.MIDDLE_INITIAL as MIDDLE_INITIAL,
     PR_LETTER_MASTER.LAST_NAME as LAST_NAME,
     PR_LETTER_MASTER.ADDRESS_LINE1 as ADDRESS_LINE1,
     PR_LETTER_MASTER.ADDRESS_LINE2 as ADDRESS_LINE2,
     PR_LETTER_MASTER.ADDRESS_LINE3 as ADDRESS_LINE3,
     PR_LETTER_MASTER.CITY as CITY,
     PR_LETTER_MASTER.STATE as STATE,
     PR_LETTER_MASTER.ZIP as ZIP,
     PR_LETTER_MASTER.ZIP_PLUS as ZIP_PLUS,
     PR_LETTER_MASTER.DELIVERY_EMAIL_ID as DELIVERY_EMAIL_ID,
     PR_LETTER_MASTER.SIGNATURE_TYPE as SIGNATURE_TYPE,
     PR_LETTER_MASTER.SIGNATURE_NAME as SIGNATURE_NAME,
     PR_LETTER_MASTER.TEAM_CAPT_MEMBER_NUMBER as TEAM_CAPT_MEMBER_NUMBER,
     PR_LETTER_MASTER.SIGNATURE_PHONE_NUMBER as SIGNATURE_PHONE_NUMBER,
     PR_LETTER_MASTER.LAST_LETTER_SENT_DATE1 as LAST_LETTER_SENT_DATE1,
     PR_LETTER_MASTER.LAST_LETTER_SENT_DATE2 as LAST_LETTER_SENT_DATE2,
     PR_LETTER_MASTER.LAST_LETTER_SENT_DATE3 as LAST_LETTER_SENT_DATE3,
    to_char(PR_LETTER_MASTER.EXIT_CONFERENCE_DATE,'FMMonth DD, RRRR') as EXIT_CONFERENCE_DATE,
     PR_LETTER_MASTER.REVIEW_TAX_SEASON as REVIEW_TAX_SEASON,
         PR_LETTER_MASTER.STATE_SOCIETY_NUM as STATE_SOCIETY_NUM,
         PR_LETTER_MASTER.STATE_SOCIETY_NAME as STATE_SOCIETY_NAME,
     PR_LETTER_MASTER.SECONDARY_LETTER_SEQUENCE as SECONDARY_LETTER_SEQUENCE,
     PR_LETTER_MASTER.CREATION_DATE as CREATION_DATE,
     PR_LETTER_MASTER.STATE_CODE as STATE_CODE ,
         PR_LETTER_MASTER.DELIVERY_EMAIL_ID as DELIVERY_EMAIL_ID,
         PR_LETTER_MASTER.TEAM_CAPT_FIRST_NAME as TEAM_CAPT_FIRST_NAME,
         PR_LETTER_MASTER.TEAM_CAPT_LAST_NAME as TEAM_CAPT_LAST_NAME,
         to_char(PR_LETTER_MASTER.DT_RAB_PRESENTATION,'FMMonth DD, RRRR') as DT_RAB_PRESENTATION,
         PR_LETTER_MASTER.RAB_DESCRIPTION as RAB_DESCRIPTION ,
         PR_LETTER_MASTER.TEAM_CAPT_MIDDLE_INITIAL as TEAM_CAPT_MIDDLE_INITIAL,
pr_letter_master.salutation as Salutation
from      PRISM.PR_LETTER_MASTER PR_LETTER_MASTER
where secondary_letter_sequence in (:secondary_sequence)]]>
                         </sqlStatement>
                         <sqlStatement name="Q2">
                              <![CDATA[select followup_description from pr_letter_details where secondary_letter_sequence = :SECONDARY_LETTER_SEQUENCE]]>
                         </sqlStatement>
                    </dataQuery>
                    <dataStructure>
                         <group name="letter1" source="Q1">
                              <element name="LETTER_DATE" value="LETTER_DATE"/>
                              <element name="FIRST_NAME" value="FIRST_NAME"/>
                              <element name="MIDDLE_INITIAL" value="MIDDLE_INITIAL"/>
                              <element name="LAST_NAME" value="LAST_NAME"/>
                              <element name="ADDRESS_LINE1" value="ADDRESS_LINE1"/>
                              <element name="ADDRESS_LINE2" value="ADDRESS_LINE2"/>
                              <element name="ADDRESS_LINE3" value="ADDRESS_LINE3"/>
                              <element name="CITY" value="CITY"/>
                              <element name="STATE" value="STATE"/>
                              <element name="ZIP" value="ZIP"/>
                              <element name="ZIP_PLUS" value="ZIP_PLUS"/>
                              <element name="SALUTATION" value="SALUTATION"/>
                              <element name="REVIEW_TYPE" value="REVIEW_TYPE"/>
                              <element name="DT_RAB_PRESENTATION" value="DT_RAB_PRESENTATION"/>
                              <element name="RAB_DESCRIPTION" value="RAB_DESCRIPTION"/>
                              <element name="SIGNATURE_NAME" value="SIGNATURE_NAME"/>
                              <element name="SIGNATURE_PHONE_NUMBER" value="SIGNATURE_PHONE_NUMBER"/>
                              <element name="SIGNATURE_TITLE" value="SIGNATURE_TITLE"/>
                              <element name="SIGNATURE_EMAIL_ID" value="SIGNATURE_EMAIL_ID"/>
                              <element name="TEAM_CAPT_MIDDLE_INITIAL" value="TEAM_CAPT_MIDDLE_INITIAL"/>
                              <element name="TEAM_CAPT_FIRST_NAME" value="TEAM_CAPT_FIRST_NAME"/>
                              <element name="TEAM_CAPT_LAST_NAME" value="TEAM_CAPT_LAST_NAME"/>
                              <element name="REVIEWED_FIRM_NUMBER" value="REVIEWED_FIRM_NUMBER"/>
                              <element name="REVIEWED_FIRM_NAME" value="REVIEWED_FIRM_NAME"/>
                              <element name="REVIEW_NUMBER" value="REVIEW_NUMBER"/>
                              <element name="LETTER_ID" value="LETTER_ID"/>
                              <group name="Detail" source="Q2">
                                   <element name="followup_description" value="followup_description"/>
                              </group>
                         </group>
                    </dataStructure>
               </dataTemplate>

OS 10.6 and PS CS3 problems

I recently upgraded my Mac OS from 10.4.8 to 10.6 and my PS CS3 won't open

I had a similar problem. I was exporting to JPEG and LR crashed. That's the least of worries. Every app i've opened so far in snow leopard has crashed one way or another. Waste of 30 bucks so far!

Illustrator CS3 - problems saving as pdf (or pdf-compatible)

Hi,
My office are trialling Illustrator CS3 as we're getting some business card type work and we'd like to be able to send the proposed designs to the client as a multi-page PDF.
Unfortunately, I'm having a terrible problem when saving a particular file i) as .ai format, if PDF compatibility is checked, &
ii) as a PDF.
In both cases the progress bar goes half way and then Illustrator hangs, eventually saving after 3 hours, at the last try!
The multi-page document consists of 7 x A4 tiles, I know this sounds big but actually there's not that much stuff in it: on each page there's a bit of text, a gradient, 3 monochrome logos and two drop-shadows. There is also a spot colour and a linked image (500kb). If/when it eventually saves the pdf is <150kb and the .ai is <2mb.
I've tested various options when saving to try to trace the problem and it ONLY hangs when PDFing is involved; it saves with compression really fast.
Obviously the time it's taking isn't practical so I'm hoping someone can suggest what might be wrong. The PC is a decent spec: WINXP sp2 / 3GHz P4 / 1mb ram / 256mb gfx / 1.5Gb swapfile / 5gb defragged space on HD. I've looked at the Windows Task Manager as Illustrator is trying to save - the CPU is only up to 50% and the swapfile usage is 300mb - if it's taking so long why isn't it maxed out?
Hope someone can help, thanks in advance.
smithy_ss

I can't save a 1.4 meg .ai file as .pdf. Program freezes.

RE: HR ABAP Multiple selection problem on input selection-screen

hi friends,
I AM Facing one problem in HR abap report selection-screen , in my report employee details data getting based on payroll area
of selection-screen. Here iam SELECTION-SCREEN declarations made in program level NOT created REPORT CATEGORY FOR
PNP LDB.
ACTUAL MY PROBLEM IS IF I SELECT SINGLE PAYROLL AREA IN SELECTION-SCREEN IT GETTING DATA PERFECTLY FOR THAT
PAYROLL AREA
EX. ZA - PAYROLL AREA IF I SELECT IN SELECTION SCREEN IT FETCHING THAT PAYROLL AREA DATA PERFECTLY, PROBLEM
IS IF I SELECT MULTIPLE PAYROLL AREAS IN SELECTION-SCREEN PAYROLL AREA FIELD ZA AND ZB PAYROLLS IT FETCHING
ONLY ZA -PAYROLL DATA ONLY IT IS NOT FETCHING DATA FROM ZB PAYROLL AREA.MY REQUIREMENT IS IT SHOULD FETCH
BOTH PAYROLL DATA AND SHOWING .
HERE IAM GIVING MY SELECTION SCREEN DECLARATION SYNTAX.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS:
                S_ABKRS FOR P0001-ABKRS NO INTERVALS," NO-EXTENSION,     " PAY ROLL AREA
                S_PERSA FOR P0001-WERKS NO INTERVALS," NO-EXTENSION,     " PERS.AREA
SELECTION-SCREEN END OF BLOCK B2 .
PLEASE Any body knows solution for this selection give me reply.
regards,
gopal

If you are using Logical DB PNP why are you coding Selection Fields for ABKRS and WERKS?   Both of these fields are defined in the PNP Selection Screen and if you use those fields then SAP will handle filtering the data.

Lightroom 1.1 - Adobe Camera RAW 4.1 (Bridge, Photoshop CS3) problem

Dear all,
I am having some problems with the appearance of files developed in adobe lightroom 1.1 or in adobe camera raw 4.1 from e.g. bridge or photoshop cs3. When developing in lightroom the images look great, however when using acr 4.1 and the same xmp sidecar settings imported from lightroom, the image in acr looks very pale in comparison. For example when using the export into photoshop option in Lightroom, the image in PS3 looks very pale to the one in lightroom. The same problem persists with developing using ACR 4.1 from bridge. I have turned autotoning in ACR off. Also in the color management of PS CS3, the desaturate checkbox is UNchecked.
I am using an icc profile for my 30" cinema display, calibrated with colory eyes pro and a spyder2.
Has anybody had similar problems with ACR 4.1 or am I just doing something horribly simple wrong?
Thanks for your help!
Immanuel

Thomas,
thanks for your reply. In Mac OS X Preview the images look all good and very much like what I see in Lightroom. In any case not as pale or like with a slight white overcast to what I see when using ACR 4.1 from Bridge or Photoshop CS3. In PS color settings, preserving embedded profiles is checked. Yes, it seems to me as well that this is some color management issue. The 30" Cinema display was calibrated using Color Eyes Pro and Spyder2 to Gamma 2.2 and 6500 temp. However, even when reverting to the standard Apple color profile for the monitor, the problem persists.
No luck so far...
Immanuel

Multiple CS3 problems

Similar Messages

Maybe you are looking for