Multiple DAC using One Informatica

I would like to have 2 DAC servers load data into the same datawarehouse. so I can start 2 multiple loads when needed.
Has anyone setup 2 dac servers pointing to the same informatica?
Or
Is there a way to run multiple loads in one dac?

Depending on your OS platforms, you may be able to do 2 installs of the DAC server and Informatica server..as long as the folders and ports are configured properly. From what I recall, You cannot point one DAC server to 2 informatica server? I assume it issues pmcmd commands to one informatica server. You may want to confirm that but best bet is to separate each DAC to its own INFA server. Also, as suggested, make sure you are not loading he same target and also ensure you have the physical resources (RAM) to account for 2 concurrent ETL runs in case you are running on the same server.

Similar Messages

  • Adding data to multiple tables using one form in Access 2010?

    Hi All,
    I have a access database with two tables and I want to create a single form to enter data into that tables.
    How to adding data to multiple tables using one form in Access 2010?
    I don't have to much knowledge of access database?
    Please help me
    Thanks
    Balaji

    You really don't enter identical data into 2 tables.  You enter dat into one single table, and then you have an unique identifier that maps to another table (you have a unique relationship between two tables). 
    Maybe you need to read this.
    http://office.microsoft.com/en-001/access-help/database-design-basics-HA001224247.aspx
    Think about it this way...  What is you update data in 2 tables, and then the data in one of those tables changes, but the data in the other table does NOT change.  WHOOPS!!  Now, you've got a BIG problem.  For instance, you have a customer
    named Bill Gates.  In one Table you update Bill's address to 1835 73rd Ave NE, Medina, WA 98039 and in the other table you accidentally update Bill's address to 183 73rd Ave NE, Medina, WA 98039.  Now you have 2 addresses for Bill.  Why would
    you want that???  Which is right?  No one knows.  If you have one address, you just have to update one address and if there is a mistake, you just have to update one address, but you don't have to waste time trying to figure out which is right
    and which is wong...and then update the one that is wrong.
    Post back with specific questions.
    Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

  • TS5223 can I have multiple users use one apple account?

    can I have multiple users use one apple account?

    I interpreted his post to mean that he meant multiple human users, not multiple devices.  Hopefully, he'll clarify.

  • Multiple users using one Xserve as primary computer ?

    Hello,
    I don't know if this is possible: use one Xserve, running 10.6 server, and somehow connect 5 displays / keyboards to run their own environment.
    Any suggestions ?
    S.

    In general, servers don't make good end-user systems, as the two have entirely different use and uptime and installed-software models. Clients reboot and can come and go, where servers usually target uptime and stability.
    Apple Mac OS X follows a one-seat, one-keyboard, one-desktop model for the installed software and system operations. With a single or multiple displays.
    Mac boxes aren't set up for (graphics-oriented) multi-user operations.
    Mac boxes can be used as multi-user boxes from the command line; I use that regularly. ssh or telnet into the box, and use the bash shell command line as is common with a traditional Unix box.
    It's also possible to get multiple sessions with remote X Windows displays with the Apple X11 package, but you'll need to have X Windows servers (whether thin client or otherwise) to display the X11 traffic.
    All that written, the Aqua Connect third-party package is analogous to Microsoft Windows Terminal Server, and that's probably close to what you appear to want here.

  • Multiple iPods using One Computer

    Over the past two years, I have acquired an iPod Mini, iPod Shuffle, and most recently an iPod nano. I have loaded iTunes for the iPod Mini, but don't want to have 3 versions of iTunes on this one computer (my wife wants to use one of the othe iPods). How do I configure iTunes to support multiple iPods? Do I need to load the software for the other iPods for them to work? HELP!!!

    Here's a good link.
    http://discussions.apple.com/thread.jspa?threadID=121830&tstart=125

  • Multiple users using One account and issue making calls to 1-800-###...

    We have 15 volunteers who are using One account we set up for them. They login at the same time and need to make 1-800 calls (same number) concurrently. Right now, when you start pressing 800 all of sudden the display goes blank (cx300) and can't even finish
    entering the number. We have Lync 2010 and 2013 running together and most services moved to Lync 2013. Before we introduced Lync 2013 we did have this problem, but only intermittently. Now with Lync2013 it is consistent issue.
    What settings do I change?
    Do I need to create more accounts and assign Lync #s respectively?

    Hi,                                   
    Would you please tell us what did you do with this scenario?
    Please check if there is any error message from Mediation Server and FE Server when the issue happen.
    Check if it is a performance issue, you can test to login the same Lync account with two users, make call concurrently. If it works work, it may be a performance issue.
    The best way is to create more account and assign to these users.
    Best Regards,
    Eason Huang  
    Eason Huang
    TechNet Community Support

  • Database Adapter: exposing multiple operations using one PartnerLink

    Hi,
    I use the Database Adapter for accessing stored procedures in a package.
    Using the wizard, I am able to specify a PartnerLink for one procedure in my package. However, the same package (my 'business service') contains multiple procedures I want to expose and call, preferably via the same PartnerLink.
    Is this possible?
    If so, what is the best strategy, e.g. use the wizard multiple times and merge the resulting wsdl files?
    Thanks, Sjoerd

    How do you do that?
    I specifically want to Poll a table, with the wizard it doesn't give you any options to edit the query, I suppose you go into the generated files and edit the query that way?
    As it happens I have actually worked around my specific issue using XSLT functions, I was actaully trying to convert DB2 JD Edwards dates using this table lookup) but once I understood how the date format is stored it was simple enough to do in XSLT.
    However I'm still interested to know how this is done as I may have another requirement that requires SQL joining to the same table twice.
    Regards
    Stuart

  • Managing media on multiple iPads using one computer.

    I am working with a client who wants to use iPads in their showroom so their sales force can show product info and videos to their customers. I need to find a way to upload the content they want to show onto multiple iPads from a single computer. Is it possible to do this with the iPad? I thought only one device could be registered to a computer at a time. Any thoughts?

    New companies are entering the sync and charge market.
    Lock N Charge has an new 32 iPad cart and a new 16 USB handheld sync and charge unit.
    Ergotron has introduced an inexpensive 16 USB module that can be a desktop syn and charge or stack into a cart format for up to 48 iPad Sync and Charge.
    < Edited By Host >

  • Multiple iphones using one itunes account

    I'm fairly new to the itunes world and was wondering about the ability to sync multiple iphones to a single itunes account. I have the iphone 4s and have it synced with my itunes account...my boyfriend recently left the dark ages and is now using my old iphone 3gs, unfortunately he doesn't have a computer or access to the internet way out in tim-buck-two. We were curious as to whether or not he could use my computer with itunes already downloaded on here...of course he would have his own apple ID. Will he be able to have access to all my playlists and music so he can use my music as well? I sure would appreciate any help anyone can give me!

    This is great news as I've been struggling with this issue for some time. Mainly because my wife is a little old school and likes to put music on CD's and this solves that problem. Thanks again!!
    Mr Mars,
    You are welcome!  I hope you have achieved the expected degree of "harmony." 
    Family Sharing:  A new way to bring harmony to your family’s digital life
    Ed.

  • How do I use iCloud if I have multiple devices using one computer/library, but I don't want contacts, calender, etc. to be shared? Can each device have it's own Apple ID and still pull music, apps, etc. from one library?

    Both my mother, father, and I recently got iPhones. We've all had iPods in the past and been able to survive under a single Apple ID/iCloud account. Now that we all have iPhones, we've heard a couple horror stories about parents and kids contacts and calenders merging when they are registered under the same Apple ID. What steps should we take to avoid this problem? We would still like to be able to share the same music, apps, videos, etc. If we all get individual Apple IDs, can we still all use the same iTunes library we have on our computer without any pitfalls?
    Thank you! A response would be much appreciated(:

    You can share the same Apple ID for purchasng form the iTunes and app stores without any problems, but you should all used separate iCloud accounts with separate Apple IDs.  (You are not required to use the same ID for iCloud and other services as you do for the iTunes store.)  This will prevent you from ending up with merged data.  You should also use separate Apple IDs for iMessage and FaceTime or you will end up getting each other's text messages and FaceTime calls.
    This article may be of interest: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/, as well as this video: http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l.

  • Can multiple users use one drive for time machine

    I have an older G4 which I have put a 500mb drive into. I want to put it on the newtork and use it as a time machine. Do I need to partion the drive, such that each user has there own partition? Or just one large partition and allow users access?
    Thanks

    see if this user tip can help: http://web.me.com/pondini/Time_Machine/26.html
    JGG

  • Multiple users using one iPhoto library on a server

    I'm working in a design company and we have a huge folder stuffed with reference images on our server. Accessing it is ok using Adobe Bridge but I recently had an idea to create an iPhoto library on the server, this would allow people to quickly find relevant images and by keyword or album. I set it up and all worked fine until I tried opening the library up on a colleagues machine. turns out the folder is 'locked' and completely unaccessable if someone else had it open. Is there a way to make the library more flexible so that more than one person can use it at one time? Thanks

    Welcome to the Apple Discussions. IPhoto is not designed to be used on a network server. iPhoto is not reliable on any drive that isn't formatted OS X Extended. If the library is located on an OS X Extended formatted external HD withownership set to be ignored and connected to a Mac it can be accessed and used by other Macs. Just create a guest account that others can use to get to the external HD.
    If you want multi user compatibility I suggest you look at one of the DAM (digital asset management) applications that offer that - like Media Expression. Other possible DAM applications are described and discussed at The DAM Forum.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

  • Transport to multiple systems using one package

    My customer has one development instance that services two test and production landscapes for seperate geographical regions.  This is a new installation and they are developing using packages.  They currently belive that they can transport the objects from those packages to each landscape via the same package, transport layer and transport route.  I'm contending that that is not possible and that they will have to create a seperate package with the same objects for each landscape if they want to transport to both.  I'm a bit inexperienced at this and could use any advice available.  Is it possible to setup STMS transport routes to transport to two seperate environments from the same transport layer?
    Regards.

    Hi Joe,
    One thing that you can do is to ask you Basis people to provide the Data and CO files for your transport request
    You can then send these files via mail, CD etc to any number of locations and import it into the system

  • Problem with multiple applications using one audio output

    Hey there, I'm having issues setting up my 5.1 headset seen here (http://www.sharkoon.com/?q=en/content/x-tatic-digital) to work with multiple applications.
    Right now I have audio streaming from a flash video, when I try run "$ speaker-test -c 6" I get the following error:
    speaker-test 1.0.25
    Playback device is default
    Stream parameters are 48000Hz, S16_LE, 6 channels
    Using 16 octaves of pink noise
    ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
    Playback open error: -16,Device or resource busy
    If I try open another application which uses this device, the first application has its sound cut off.
    2 more things to note:
    - My preference for setup would be audio output through S/PDIF and input through USB, with the USB output disabled (To not waste system resources).
    - I unmuted all channels in ALSA, however when I ran the test only 2 channels seemed to be working (Front L&R), it may have been defaulting to the USB connection, in which case, that explains only 2 channels being in use, is there a method of setting the S/PDIF as default system wide?
    Thanks in advance for any help given!

    brebs wrote:It's put the comments on multiple lines - fix that.
    Woops, I guess my paste messed up, new .asoundrc: http://pastie.org/3706033
    I can run both at the same time, however I cannot hear any audio. Do I somehow have to change the default device, if so how can I do that?
    Edit:
    Restarted system now I get:
    speaker-test 1.0.25
    Playback device is default
    Stream parameters are 48000Hz, S16_LE, 2 channels
    Using 16 octaves of pink noise
    Rate set to 48000Hz (requested 48000Hz)
    Buffer size range from 2048 to 8192
    Period size range from 1024 to 1024
    Using max buffer size 8192
    Periods = 4
    was set period_size = 1024
    was set buffer_size = 8192
    0 - Front Left
    Segmentation fault
    (That's with both commands)
    EDIT 2:
    Interesting, apparently 2 audio streams are working, however the console thing still doesn't work..?
    EDIT 3:
    Didn't last long, now flash crashes and html 5 doesn't work -.-
    EDIT 4:
    Flash only works when other audio is active, however it has constant popping sound. I went through the system logs to get the errors of when flash crashes, it's audio crashing it, here's the error:
    Apr  1 02:04:15 localhost kernel: [ 7057.499787] AudioThread[6227]: segfault at 7f2e2f7a8008 ip 00007f2e413a2786 sp 00007f2e33614ae8 error 7 in libasound.so.2.0.0[7f2e4131e000+eb000]
    Last edited by B3NW (2012-04-01 01:11:04)

  • Sending multiple files using one socket

    Hi guys
    I'm working on a simple app that sends multiple files over LAN or I-NET. The problem is that the app run seems to be non-deterministic. I keep getting this error on the client side:
    java.io.UTFDataFormatException: malformed input around byte 5
            at java.io.DataInputStream.readUTF(Unknown Source)
            at java.io.DataInputStream.readUTF(Unknown Source)
            at service.DownloadManager.storeRawStream(DownloadManager.java:116)
            at service.DownloadManager.downloadFiles(DownloadManager.java:47)
            at manager.NetworkTransferClient$1.run(NetworkTransferClient.java:104)The byte position changes every time I run a transfer. The error is caused by this line: String fileName = in.readUTF(); Here's the complete code:
    Client
    private void storeRawStream() {                               
            try {
                FileOutputStream fileOut;                       
                int fileCount = in.readInt();           
                for(int i=0; i<fileCount; i++) { 
                    byte data[] = new byte[BUFFER];
                    String fileName = in.readUTF();               
                    fileOut = new FileOutputStream(new File(upload, fileName)); 
                    long fileLength = in.readLong();                                 
                    for(int j=0; j<fileLength / BUFFER; j++) {
                        int totalCount = 0;
                        while(totalCount < BUFFER) {                       
                            int count = in.read(data, totalCount, BUFFER - totalCount);
                            totalCount += count;                 
                        fileOut.write(data, 0, totalCount);
                        fileOut.flush();
                        bytesRecieved += totalCount;                                  
                    // read the remaining bytes               
                    int count = in.read(data, 0, (int) (fileLength % BUFFER));                                        
                    fileOut.write(data, 0, count);              
                    fileOut.flush();
                    fileOut.close();      
                    transferLog.append("File " + fileName + " recieved successfully.\n");  
            } catch (Exception ex) {
                ex.printStackTrace();
        }Server
    public void sendFiles(File[] files) throws Exception {
            byte data[] = new byte[BUFFER];
            FileInputStream fileInput;                                       
            out.writeInt(files.length);              
            for (int i=0; i<files.length; i++) {   
                // send the file name
                out.writeUTF(files.getName());
    // send the file length
    out.writeLong(files[i].length());
    fileInput = new FileInputStream(files[i]);
    int count;
    while((count = fileInput.read(data, 0, BUFFER)) != -1) {
    out.write(data, 0, count);
    bytesSent += count;
    fileInput.close();
    out.flush();
    Does anybody know where's the problem? Thanx for any reply.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Send the length of each file ahead of each file, with DataOutputStream.writeLong().
    When reading, read that long, then stop reading bytes when you've read exactly that length.

Maybe you are looking for