Multiple DataTargets in a BI 7.0 System to One DataSource in Source System

Currently, I do not have access to BI 7.0 system. I am wondering whether it is possible to connect MULTIPLE DataTargets of a single BI 7.0 system to ONE DataSource in the source system? I have searched the forum, but I couldn't find relevant posts. If I am not wrong, until BW 3.5, once a DataSource is assigned to an InfoSource, it can not be assigned to any other InfoSource of the same BW system. I have heard that this has changed in BI 7.0 with the new DataFlow concept.
The current requirement is that multiple DataTargets of a single BI system need to get DELTA data from the same DataSource in the source system. If this is technically possible in BI 7.0, should the source system also support such an assignment (since the DELTA load timestamps are maintained in the source system)? What source systems currently support this feature, if any? What are the appropriate tables in the source system that I need to look at to do further investigation?
All the useful inputs regarding these questions will be rewarded with points. Let me know if you need any further clarification of the requirement. Thanks!
Sameer

Hi Sameer,
But since there is only one transformation between the PSA and DataTarget, all the data (irrespective of the indicator) will flow through unless I filter on the "planning stage" indicator
You can create one transformation between Datasource and ONE DataTarget. But in your case, you have TWO datatargets. So you have to create two DTP's which can have diffrent filter parameters.
You can fill two different targets ( cube1: before manual update, cube2: after manual update) using your datasource.
For this, you need to create two transformation. Keep in mind, everytime you create a transformation you must create a DTP for data movement.
So you will have:
DS1 -- TRANS1-- DTP1 --Cube1
DS1 -- TRANS2DTP2Cube 2
In DTP1 set filter for indicator :X and DTP2 set filter for indicator :Y. Both DTP1 and DTP2 should work in delta mode.
I would suggest you to create one initialization for your DS1. if it is not possible create two infopackages for two initializations. I suppose you have the indicator in selection parameters of infopackages.
Derya

Similar Messages

Multiple DataTargets in the Same BI 7.0 System to One DataSource

Currently, I do not have access to BI 7.0 system. I am wondering whether it is possible to connect MULTIPLE DataTargets of a single BI 7.0 system to ONE DataSource in the source system? I have searched the forum, but I couldn't find relevant posts. If I am not wrong, until BW 3.5, once a DataSource is assigned to an InfoSource, it can not be assigned to any other InfoSource of the same BW system. I have heard that this has changed in BI 7.0 with the new DataFlow concept.
The current requirement is that multiple DataTargets of a single BI system need to get DELTA data from the same DataSource in the source system. If this is technically possible in BI 7.0, should the source system also support such an assignment (since the DELTA load timestamps are maintained in the source system)? What source systems currently support this feature, if any? What are the appropriate tables in the source system that I need to look at to do further investigation?
All the useful inputs regarding these questions will be rewarded with points. Thanks!
Sameer

Currently, I do not have access to BI 7.0 system. I am wondering whether it is possible to connect MULTIPLE DataTargets of a single BI 7.0 system to ONE DataSource in the source system?
Yes, it is possible.
Transformations and DTP's are Source - Target specific.
The current requirement is that multiple DataTargets of a single BI system need to get DELTA data from the same DataSource in the source system. If this is technically possible in BI 7.0, should the source system also support such an assignment (since the DELTA load timestamps are maintained in the source system)?
Data is extracted into PSA from the sourcesystem and is taken from there to different targets connected using diff transformations. If the datasource works on timestamp then it all depends on how the data is transformed to diff targets from PSA.
What source systems currently support this feature, if any?
ECC, irrespective of sourcesystem it all depends on how the datasource functions as data is only extracted till PSA.
What are the appropriate tables in the source system that I need to look at to do further investigation?
Datasource properties - ?? ROOSOURCE...

Multiple rows in BI Infocube/or DSO for one row in source system

Hi Gurus,
I have a typical scenario where in I have a ztable in R/3 system and it contains some custome transaction data.
The business scenario wants it to split into multiple records in BI ( ofcourse keys for each records in BI would be unique). Either infocube or DSO can be used to store the data in BI.
Is it possible to do that. As far as my knowledge goes( I have limited BI exposure) one record from source system ( read row) is transformed into one record ( row) in BI in simple transformation.
Please give me some rough idea if its possible how can we achieve it.
I know we can write an ABAP program and create a ztable to do it and use the ztable as source for incube/dso. But I want to use this as last option.
Thanks
Sumit

Hi,
An ODS will be better.
Use a start routine.
data-package --> package2
create your own package with your rules.
update.insert.modify.append....
package2 --> data_package
and from 1 row, you create n row as your rules would like..
Regards,

When iam loading multiple datatargets with single datasource request failed

when iam loading multiple datatargets with single datasource request failed
i want to delete the bad request at a time in all datatargets

Hi Neeraj,
The only thing you can do is go in to theMonitor screen of that IP and select the datatargets from the Monitor screen.In the next screen you can see all the targets included in the IP at the top.But the only bad thing is you have to manually delete the Bad request only from each target.
Regards
Sandeep

HT5616 I have multiple phones and iPads and all are linked to one iCloud account and one iTunes Account. I want to keep the same iTunes Account so I can share music, etc., however, I want each device to have its own iCloud account. How do I do this?

I have multiple phones and iPads and all are linked to one iCloud account and one iTunes Account. I want to keep the same iTunes Account so I can share music, etc., however, I want each device to have its own iCloud account. Any help on how I can I do this?

You'll need to create an Apple ID for each device. Use the new Apple ID for FaceTime, iMessage and iCloud on the device. Use the original Apple ID for Settings>iTunes & App Store.

Hi, I activated my CS6 in 2012 under my student licence and still using it. I've heard that you can't run CS6 on multiple computers. How do I transfer it from one computer to another as I am switching computers?

Hi, I activated my CS6 in 2012 under my student licence and still using it. I've heard that you can't run CS6 on multiple computers. How do I transfer it from one computer to another as I am switching computers?

Hi,
first, I'm not Adobe's "slave" as you might to accuse me. Most of the posters here are users like me.
I only can repeat that what I found in Adobe's help sites, as I wrote above. You are free to figure out the "real" truth and - the best would be - you may contact Adobe directly, here are - I'm sure you know them - the links I would use: http://helpx.adobe.com/support.html and http://helpx.adobe.com/contact.html.
Hans-Günter

HT204150 I now have multiple icloud accounts. How do you determine which one is holding the data?

I recently set up a new Windows 7 PC. I backed my phone to the icloud. When I plugged my phone into itunes on the PC it wiped my contacts and music out. Now I'm finding I have multiple iCloud accounts. I don't know which one to use or how to get my data restored to the phone. Very frustrating! Can anyone help me? --ptowngal

Go to icloud.com, sign into each of your iCloud accounts and see which one(s) contain your data.

Have multiple accounts, how can I move all products into one account?

have multiple accounts, how can I move all products into one account?

Backup Software Recommendations
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
Synk Pro
Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Or you can simply use the Restore option of Disk Utility to clone the drive to the backup:
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

Shall I use one datasource for multiple connection pool?

Hi,
I need to clarrify that, Shall I use one Datasource for multiple connection pool in distributed transaction?
Thanks with regards
Suresh

No. If its transactions across multiple databases you should use different datasources.

How to multiple/ parellal sets of books to generate more than one financial statement based on different (or the same) accounting principles.

How to multiple/ parallel sets of books to generate more than one financial statement based on different (or the same) accounting principles.
My Client needs Parallel Ledger in SAP B1 similar like SAP ECC. Is this functionality available ?

Dear Mr. Nagrajan,
Thank you for your response. I have already gone through documents but not able to understand. Is there any setup for this ? or its just work around i.e. using template and special field in JV i.e. Ref. 1 /2
My doubts :
I understand that Chart of Account structure is one and common for IFRS and other accounting method. We need to create only those account separately ( 2 times with prefix like IFRS revenue account, GAAP Revenue account).
Now at time of entry, Assume some entries / adjustment are specifically for IFRS and not for other ledger. In this case, What need to do ?
You have mentioned about DTW approach but do we need to insert all JV's again with other ledger ?
Someone suggested that if any entry which are specific to IFRS Ledger, We need to user Ref.1 /2 column or Transcation code column and in which we can put IFRS
Based on this, Need to create 2 seperate template for IFRS and other ledger for all report.
This is my understanding of Solution in SAP B1. Please help me to clarify my though process
Please do needful.If you have done implemenation and if you can share doucment, it would be great help.
Email :[email protected]

How to open multiple artboard illustrator file in illustrator. Coz, whenever we open a multiple artboard file, illustrator provide an option to chose one artboard but does not allow opening of all artboards. Somebody may explain it

How to open multiple artboard illustrator file in illustrator. Coz, whenever we open a multiple artboard file, illustrator provide an option to chose one artboard but does not allow opening of all artboards. Somebody may explain it

Doug's got it right. It sounds like you are trying to open a later version file in an earlier version. This will always be handled as opening the PDF portion of the file. Try Googling AI_openMultiPagePDF for a script to open these or Resave from the newer version to the older.

How to change the Source system from ONE DataSource?

Hi,
I'm trying to change a DataSource's source system (active with dtp and transfer rules), but it's not possible to do it in change mode because the field 'Source Sytem' is not enabled. I know I can use the BDLS transaction but I understand that this is for change all Datasources and I only want to change one of all.
Thanks for your help

Hi Marcel,
As I understand apart from file and web services all other data sources are replicated from underlying source system. BDLS transaction is used to change the source system but in case of system copy activity and it is necessary because the data sources points to old source system.
In your case as I understand you will have to replicate the current data source directly from underlying source system and then build the rest of the flow. May I know how you have got this single data source for which the source system is different?
Regards,
Durgesh.

ERROR - no available datasource for source system exist

I tried to load the master for 0Bill_Type
1) Install infoobject business content and Create infoobject
2) Activate datasource in R/3
3) Replicate datasource
4) Assign infosource ---> the error said no available datasource for source system exist
When I go to source system--> Object overview --> I don't see anything at all?
Please advise what went wrong ?

Hi Pandadda,
I think you have not transferred the APPLICATION COMPONENT HIERARCHY yet. If not, then do the following:
1. In your R/3 system execute TCODE = SBIW.
2. Go to BUSINESS CONTENT DATASOURCES
3. Execute TRANSFER APPLICATION COMPONENT HIERARCHY by clicking the CLOCK.
Replicate you datasource then check it on your BW system
R,
Adwin

Use case for multiple crosstabs under one datasource

I'm trying to understand why one would have multiple crosstabs for one datasource. When I change one crosstab, it changes the other crosstab. I was could have a different layout for multiple crosstabs.
Thanks.
Regards,
Mel Calucin

Hi Mel,
I am not following this question; would it be possible to rephrase it?
You could have multiple tabs for a data source - such as a one tab showing the result set in a cross tab and the other for a chart.
Tammy

Display Datasource in Source System -- connects to Production ERP

Hello,
We have performed a System Copy of BI Prod. In the copied system on one of the Generic DataSource (ZBIP_VKDFSEXT) when I right click and say "Display Datasource in Source System", it is connecting to Production ERP, supposedly it must be connecting to Dev ERP.
I have tested RFC COnnections and Logical System Settings in WE20 and 21, but they are pointing to DEV ERP.
Correct replies appreciated.
Thanks
SM
Edited by: SM on Jul 9, 2011 5:32 AM

Dear SM,
I guess we have faced same kind of issue earlier,
at that time we just removed RFC connection between production system because we are not using Production system connection any more.
and then just clicked on connection parameter of source-system, there we defined new RFC destination.
Hope it will solve your issue.
Regards,
Ashish

Multiple DataTargets in a BI 7.0 System to One DataSource in Source System

Similar Messages

Maybe you are looking for