Multiple DDE Servers open

Hi all,
i'm developing a software for a Chemical System,
This consist of multiples MFC (Brooks & Bronkhorst) so i've the single codes for each MFC
and i've to put them all togheter in an unique Application.
The fact is that both are written using DDE server (smartDDE for brooks and FlowDDE for Bronkhorst).
Do you think that this could cause conflicts?
seems that the subvis used by the DDE are the same (start, check, Poke....etc).
Do you have any suggestions?
TIA

Hello thescar,
Thank you for contacting National Instruments and sorry for the delayed response.
The fact that both are written using a DDE server may or may not cause conflict? Who wrote the subVIs? Do they use code interface nodes (CIN)? If so, does the smartDDE and FlowDDE call the same .lsb file? If yes, then you shouldn’t see any conflicts and like you mentioned (start, check, poke,…,etc) will be the same.
Now, as a suggestion, if your application needs reliable synchronization of data transfer, you may want to use TCP/IP instead because it provides queueing, acknowledgment of data transfer, and support for multiple connections at the driver level.
If you are able to, I would really recommend taking a look at the following application note on DDE in LabVIEW
http://zone.ni.com/devzone/cda/tut/p/id/4531
Thanks again and if you need any further clarification, feel free to send us a post!
Jordan Randall
National Instruments Italy

Similar Messages

How to configure multiple RAS servers?

Hi
'Crystal Reports Server Embedded XI R2 - Sizing and Configuration Guide'
It mentions that we can get more license and add the servers in ClientSDKOptions.xml.
<ServerInfos version="2" xsi:type="CrystalReports.ServerInfos" id="1">
<ServerInfo version="2" xsi:type="CrystalReports.ServerInfo" id="2">
    <Server>SERVER1:1566</Server>
    <Adapter>TCPIP</Adapter>
</ServerInfo>
</ServerInfos>
<ServerInfos version="2" xsi:type="CrystalReports.ServerInfos" id="1">
<ServerInfo version="2" xsi:type="CrystalReports.ServerInfo" id="2">
    <Server>SERVER2:1566</Server>
    <Adapter>TCPIP</Adapter>
</ServerInfo>
</ServerInfos>
I tried this and added ClientSDKOptions.xml file in the web application lib directory
Added that to PATH
Our application uses (Crystal-2008 / rasapp.jar /rascore.jar)
com.crystaldecisions.sdk.occa.report.application.ReportClientDocument
When i commented out rcd.setReportAppServer(sn); it is not picking up from the XML file.
I am getting the below error
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException:
There is no server specified.---- Error code:-2147217390 Error code name:serverNotFound
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportAppSession.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportAppSession.int(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportAppSession.initialize(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ClientDocument.for(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.for(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(Unknown Source)
at com.crd.report.crystal.CrystalFile.makeRcd(CrystalFile.java:65)
at com.crd.report.crystal.CrystalReportUtil.makeRcd(CrystalReportUtil.java:892)
Please help me how to set up multiple RAS servers.
Thanks
Sumathi

You are running an internal DNS server presumably but don't have these hostnames (A-NAME or C-NAME records) set on external DNS servers.
If you run a whois on your domain you can find our who hosts the DNS for the domain if you don't already know. Often DNS hosting companies will have web based tools for you to edit the DNS entries yourself or alternatively you may need to email them and ask them to create the records.
It sounds like you would like to point the addresses ubuntu.domain.com and win.domain.com to the IP address 92.62.26.10 as well. To do this you will have to make sure the services running on each box use a different port to one another. (I.e. You cannot have something running on port 80 on both servers).
Depending on your router also you may only be able to do basic forwarding (I.e. Port 80 forwards to Mac.domain.com; port 443 forwards to ubuntu.domain.com; port 25 forwards to win.domain.com).
If you need more flexibility you may need to get more external IP addresses.

Running a Select query against multiple sql servers using SSIS script task.

Hi Guys,
I need to fetch data from multiple sql servers using SSIS scirpt task inside a foreach container.
is there anyway i can build dynamic sql connections using ssis variables inside SSIS script task in each loop
Please guide me or refer any blogs so that i will try..
Thanks in advance.

Your only options is using .net code, then it will be no different than using a console app in a loop.
using (SqlConnection connection = new SqlConnection(connectionString))
connection.Open();
Console.WriteLine("ServerVersion: {0}", connection.ServerVersion);
Console.WriteLine("State: {0}", connection.State);
and so forth for each connection string
the connection string would come from the ForEach loop
Arthur My Blog

Session cleanup issue with multiple Application servers

Hi ,
I am facing a strange problem with multiple application servers. The java Webdynro session does not get cleaned up completely when user closes the browser ( without using logoff ). On re-login it gets handle of old session and then fails for consecutive view on other webdynpro iviews with an invalid session error. It again starts working with a refresh event.
Any ideas/suggestion if you have seen something similar before ?
Thanks and regards,
Amit.

Hi Amit
It seems that issues is not server related, but caused by your client browser. I know, for example, that IE8.0 keeps user session even if two separate browser instances opened on the same client machine. IE 7.0 and lower behave differently - they are separate user sessions per browser instance.
BR, Siarhei

Multiple Gateways servers - any issues?

I am being asked to monitor multiple untrusted domains through gateway servers. We already have one gateway server setup, are there any issues I should beware of when setting up a second or third one for different domains? Do they all talk back through
port 5723 happliy without any contention?

Not really - the individual servers can become the bottle-neck should there be a large number of agents reporting to them but this would be for relatively large deployments. But in terms of contention you shouldn't have any problems, there's a good article
here which has details of the process (similar content
here as well) .
I'd also take a look at the SCOM sizing tool as this will give you some details on server spec, etc
http://blogs.technet.com/b/momteam/archive/2012/04/02/operations-manager-2012-sizing-helper-tool.aspx
Extract from the SCOM2012 deployment guide:
"Gateway servers are used to enable agent-management of computers that are outside the Kerberos trust boundary of management groups, such as in a domain that is not trusted. The gateway server acts as a concentration point for agent-to-management server
communication. Agents in domains that are not trusted communicate with the gateway server and the gateway server communicates with one or more management servers. Because communication between the gateway server and
the management servers occurs over only one port (TCP 5723), that port is the only one that has to be opened on any intervening firewalls to enable management of multiple agent-managed computers. Multiple gateway servers can be placed in a single domain so
that the agents can failover from one to the other if they lose communication with one of the gateway servers. Similarly, a single gateway server can be configured to failover between management servers so that no single point of failure exists in the
communication chain.
Because the gateway server resides in a domain that is not trusted by the domain that the management group is in, certificates must be used to establish each computer's identity, agent, gateway server, and management server. This arrangement satisfies
the requirement of Operations Manager for mutual authentication."

How to configure one TREX host with multiple index servers ?

Hi All,
Does anyone know how to configure TREX on the one host,
with multiple index servers ?
Reason for this is to make better use of resources available on the host server(4 Gig, 4 Processor, Windows2003), to improve the search performance of
our KM content for portal users.
I am using TREX 7 and have not been able to do this,
despite reading the Single and Distributed install
documentation.
Any help would be appreciated.
Regards,
Andres

Hi Andres,
To make use of the RAM a Server provides you have to run two indexserver processes (each can then consume 2 GB);
Proceed like this:
1. Go to TREXdeamon.ini; check if section [indexserver2] is there (it is already provided, but not active in standard installation)
2. In TREXdeamon.ini go to
[daemon]
references sections below
programs=nameserver,preprocessor1,indexserver1,queueserver,alertserver
and add indexserver2 here. Restart TREX; second porcess is then started; can be checked in TREX monitor in Portal as well
3. To distribute existing indexes to the new process, start TREXadmintool and go to Index: Landscape
Go to the last two columns and move the indexes (move master here/secondary mouse click)
If you don't distribute the indexes the new index server process will be regarded when an new index is created.
Hope this helps!
cheers
Bettina

Safari warning before quitting when multiple tabs are open?

I'm a rather clumsy typist who often uses Apple+Tab to toggle through my open programs. This works great 99% of the time, but that other 1% is rather frustrating considering that the Q key is right next to Tab.
Apple guys, please implement a pop up/drop down warning when attempting to quit Safari when multiple tabs are open (or at least the option to enable or disable it). I use this browser for work and often have many tabs open, so accidentally quitting the browser only impedes on my workday. I know I should be more accurate, but isn't that what part of progress is? The empowerment of laziness? =)
Thanks for your time, and hopefully we see this included in soon-to-come upgrades!
Oh, and if this feature is already available, feel free to show me the way.
G4 Mac OS X (10.4.7)

jefftovar,
I created and modified the Safari Keyboard Shortcut
Quit (⌘+Q) command to (⌘ControlQ) by using System
Preferences...>Keyboard Shortcuts.
;~)
Great suggestion! But, the default Quit (⌘+Q) command is still in effect. I've looked about in trying to deactivate it, but can't seem to find it. How did you get rid of yours?
G5 Mac OS X (10.4)

A lot of memory is used when multiple tabs are open

Is there anything that can be done about the insane memory usage in Firefox when multiple tabs are open? I often have 20+ tabs open and the amount of RAM that Firefox uses when I have it open with this many tabs is just ridiculous. As an example of this, I just restarted Firefox after checking the Windows Task Manager. The Task manager said that Firefox was using 1.2 GB of RAM. I did have 32 tabs open, but this seems excessive even for this many tabs. Some of the tabs were image heavy, but none of them had any video in them. I'd think 10 MB per tab of RAM would be plenty to cover these kinds of pages, maybe 20 MB at most. The upper end of that range would be 640 MB of RAM. Instead, it appears to be using an average of 40 MB of RAM per page when this many tabs are open.
Is there anything that can be done to reduce amount of memory being used when multiple tabs are open? It really shouldn't need this much RAM to serve this many pages.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How multiple users can open and update it same time in Sharepoint 2010, excel file

we are using SharePoint 2010, multiple users can open and update the file at same time in SharePoint, I have searched a lot and
read it, some suggestions were can create the file as share work book and then save on Share point and other were its supported only with Office web Apps, Excel Web App, we don't have office Web apps or excel web app, is there any other suggestion,
any help will be great, thanks in advance

Hi,
You need office web apps for co-authoring, see Software version requirements for co-authoring in SharePoint 2013 and SharePoint Online section in below link -
http://technet.microsoft.com/en-us/library/ff718249(v=office.15).aspx
and
http://office.microsoft.com/en-us/sharepoint-foundation-help/document-collaboration-and-co-authoring-HA102772333.aspx
Edit: Link for SP 2010
http://technet.microsoft.com/en-us/library/ff718249(v=office.14).aspx
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

How to configure single web server instance to multiple application servers..

Hi all,
we are running single instance of IWS6.0 SP2 on solaris, we want to comfigure this single instance to multiple application servers(JRun). Can any one advise me whether it is possible to do.
Thanks
Raj

Hi Raj,
"how to configure single web server instance to multiple application servers.."
It's not possible for setting up multiple applicataion servers for Single iWS instance.
Thanks,
Dakshin.

How to configure multiple smtp servers per domain

Hi,
how do we configure multiple smtp servers per domain/corporate in iplanet messaging server 5.2. i wanted to do this so that i can configure some domains with virus scanning and some domains without antivirus.

Hi Martin,
Well we are trying to run a report without exactly specifying the name of reports server anywhere, e.g. in database or in form or anywhere else. Now if I do not supply a reports server name using RUN_REPORT_OBJECT, the error it displays is FRM-41211: Integration Error : SSL failure ... However if I specify the reports server name in the form, the reports run perfect. Also the name of reports server is specified in rwservlet.properties.
Now the question goes as follows:
Can I run my report from Form without specifying the name of the Reports server anywhere at all. This is so because either an in-process reports server should be picked or the one which is entered in rwservlet.properties should be pickec up by default. Please correct us if we are wrong. once we are through with it, we have to move to Oracle 10gR2 concept of reports server.
Thanks in anticipation,
Ruchi/Saurabh

How to configure multiple report servers in Oracle 10 G R2?

I want to configure multiple report servers with my application deployed on Oracle 10G R2. Since R2 does not support report server clustering, how can this be achieved without any change in the application?
Currently, the application is running with single report server.

Hi Martin,
Well we are trying to run a report without exactly specifying the name of reports server anywhere, e.g. in database or in form or anywhere else. Now if I do not supply a reports server name using RUN_REPORT_OBJECT, the error it displays is FRM-41211: Integration Error : SSL failure ... However if I specify the reports server name in the form, the reports run perfect. Also the name of reports server is specified in rwservlet.properties.
Now the question goes as follows:
Can I run my report from Form without specifying the name of the Reports server anywhere at all. This is so because either an in-process reports server should be picked or the one which is entered in rwservlet.properties should be pickec up by default. Please correct us if we are wrong. once we are through with it, we have to move to Oracle 10gR2 concept of reports server.
Thanks in anticipation,
Ruchi/Saurabh

Multiple LDAP servers on single System

hi,
Would like to know if its a good idea to have multiple LDAP servers running on a single System (Hardware) ..
100,000 user base
We would like to run the old and new LDAP databases on the same server till we phase out the old LDAP database after migrating all applications..
System:
2 x V880 4CPU 8GB RAM --multi-master configuration
4 x V420R 4CPU 8GB RAM -- read only replicas

Shouldnt be an issue - thats not a particularly large user base and thats some heft y HW. Keep in mind though that they will be on different ports so any software you migrate may eventually need tweaking to the default port when the new takes over.

Multiple Database Servers Question

Hi,
Please forgive this ignorant question, but can someone tell
me how one would go about using multiple database servers?
Just as there comes a time where one would need more than
one web server and would need to use a load balancing
solution, what happens when one would need more than one
Database Server?
How does one go about implementing that solution?
Is there some way to have two database servers carrying the
same information with some kind of load balancing solution
in front of it(?) or does one place some tables on one
Database
server, and other tables on the other database server?
(I have no clue as to how things would work.)
Thanks in advance,
Joe

Microsoft SQL allows for clustering of SQL databases, so for
instance two servers connected to a fileshare and a virtual address
shared across the two physical boxes. Database connections are made
to the virtual addres which will then be handled by the active
node. Becuase a database is ultimately a file(s) on a disk it can
only be attached to one node at a time so you end up with an
active/inactive cluster.

LDAP Authentication Scheme - Multiple LDAP Servers?

How to set up ldap authentication so that multiple ldap servers are available? Scenario: ldap service is replicated through several servers, but does not sit behind a common dns/reverse proxy connection, so applications would list each ldap server and attempt to contact each in order if one or more ldap servers is unreachable.

How to set up ldap authentication so that multiple ldap servers are available? Scenario: ldap service is replicated through several servers, but does not sit behind a common dns/reverse proxy connection, so applications would list each ldap server and attempt to contact each in order if one or more ldap servers is unreachable.

Multiple DDE Servers open

Similar Messages

Maybe you are looking for