Multiple Decks... Deck control?
How do you all control multiple decks?
G5 -> AJA IO -> BetaSP/DigiBeta, DVCPro Deck.
Two Part Question:
What type of router should there be... Need space for at least 4 different decks. Suggestions on brand/model?
How does one maintain deck control? RS422 out of AJA into/thru router to decks? Is there such a thing?
Don't want to crawl around in the dust anymore!!
Thanks
CaptM
If you are looking for a cheap option, patch bays work well. You will need a patch bay for co-ax cables (composite and/or component video), audio (we use TRS but could be XLR, Bantum, etc.) and 9 pin (I had to make that one myself but they may be available commercially).
All ours live in the machine room rack and with the patch bays we can patch to either of our two edit suites or to our dub rack (25 VHS machines). We can also patch between machines for Betacam dubbing or format conversion.
For convenience each edit suite has its own Betacam player (our most common format). The suites also have an audio mixer to enable selection (and signal modification) of the source (local deck or the machine rack). A small patch bay using linking plugs allows video connection to the local deck or the machine rack. The design allows one set of cables between the suite and the machine rack to be used for input and output. The cables loop through the client monitor on the way to the machine room.
Similar Messages
-
Occasionally and for no real reason FCP (5.1) loses rs422 control of my sony VTR - Im using Black magic decklink and can still control the deck with their deck control software but FCP wont play - normally when Im up against a deadline.
Using Latest OS and Latest FCP with Decklink HD proWell, as footnote to my previous post...
I have fixed 90% of all the strange behaviour & got my Decklink card working again by doing a clean install of OS 10.4.6, upgraded to 10.4.8, installed FCS 5, upgraded to 5.1.2, installed 5.7.2 decklink drivers and I'm editing to tape again.
BTW: I haven't installed a single other thing yet.... as I'm have just acheived this deadline with minutes to spare. PHEW!
So i don't know what further conflicts may arise, but we'll see.
On this first time getting ETT working again, I had to check the frame accuracy everytime as it was often 2 to 4 frames out of sync to tape.
Then once it finally locked it crashed about 40minutes into the 86min program. So then i just did an ETT from 10 seconds before the crash and thankfully it frame-locked first time and I made my deadline.
I'm not satisfied at all with the "looseness" of the frame-sync between FCP5 & decklink.... i had to do it about 20 times to get it to actually lock, and it still wasn't anyway... I had to compensate by 2 frames to trick it to hit the mark.
Is this everyone's experience with FCP-5 & decklink PCIe ? -
FCP-BlackMagic 422 deck control issues
I have developed an issue with RS 422 deck control between my Black Magic Decklink HD Pro and a variety of Sony decks like a PVW 2800 which is my primary deck and also a DNW A25 and a DSR 1800 that I tested as well, getting the same issues.
I get an error message: “A new tape has been inserted in the VTR. You may wish to change the Reel setting.” or “Batch Capture: Tape is unthreaded” when neither is the case. They pop up randomly. Trying to find a cause and effect but it’s still random. Tried different tapes from different cameras and a DVCAM in the DSR 1800. Same thing again. I have replaced the cable with same results.
Hardware/software rundown is 2 x 3 GHz Dual Core Xeon w/ 8GB 667 DIMMs, OS 10.4.11, Decklink 6.2.2, Quicktime 7.4.1. FCP 6.0.2.
I sent a note to BlackMagic Designs and got this: 'This is a known issue with the Apple platform. It is an Apple problem and they are trying to resolve it right now. We are hopeful to have a resolution shortly.'
It started after I rebuilt the desktop and ran it up to OS 10.4.11, and I’m inclined to do a clean rebuild and stop at 10.4.9. which is where all things ran very well. Not interested in Leopard.
But if anyone else has run into this issue and has some insight it would be appreciated.I finally found a person who's going through the same thing as me.... Have you figured it out yet? I can't get anything to work. My whole system is a write off unless this starts to work. If I don't figure it out by tomorrow I'm getting a Kona card.
-
FC 6.0.4
OSX 10.5.4
QT 7.5
While in the capture window and using deck control to play and shuttle, the preview input(in the capture window) does not update while shuttling back or rewinding. To clarify, the preview works fine while playing, fast-forwarding or shuttling forward - the preview only fails to update during rewind or shuttling backwards.
This has been tested with two systems with the versions listed above and with the following decks/cameras with the same result. The footage being used in all cases is 720p/30.
JVC HD50U
JVC GY-HD250
JVC GY-HD100
An NTSC tape was tested and doesn't have the problem.
All HDV control protocols in the device control field were tested with no change.
Is this a new bug with 720 footage or HDV control in general? Thanks in advance for any and all help!Ive had this problem as well. I'd love to find a solution. Has anyone else seen this?
-
Deck Control for non-FW decks...
Been looking around for a day or 2 can no-el-findo. In the days of FCP v3.x people would use something called a "stealth port". Essentially an 8pin serial port that would replace the modem in your G4. Paired with an 8pin to RS422 cable you were off to the races in terms of deck control.
With the CPU's out today where no modem is shipped, what device/method are
people using to control RS422 ready video decks? I need a reliable way to INSERT edit onto tape with LTC timecode, not just print to tape/video.
(Would it really be a keyspan adapter?-I'm skeptical as I've beta tested FCP v2.x
and back then keyspan wasn't recommended)
Thanx in advance...
The desert Gringo
PWell, here's the latest incarnation of the list, but it isn't going to tell you what you want to know:
http://www.apple.com/finalcutstudio/resources/devicelist.php
The capability of a VCR to do an insert edit has nothing to do with FCP, really. The deck has to have strong enough capstans and other internals, plus the firmware needs to be capable of an Insert edit. Then, and only then, do we need to see if Final Cut has a machine template that will allow it to communicate with that deck in a manner that allows the Insert.
But you began by asking about NON firewire decks, which means you have a capture card or box. Which one?
And which Sony VCR are you talking about? -
I've been merrily using a Blackmagic Decklink HD Pro for ages now, turned everything off last night, all working fabulous, turned on this morning and the deck control has disappeared within FCP, got vision and audio but no deck control and it says no communication.
However
If I use the Blackmagic deck control software, it works fine and dandy.
I've uninstalled and reinstalled drivers. the dv deck control is fine.
Any ideas?
TimIt's alright, all sorted
just uninstalled and reinstalled again and it worked! -
Sorry for this post everyone...I've searched the forums but couldn't find an answer.
Former Avid user who is making switch to FCP.
We used a Vlan to control all our decks and in reading the post, it seems all we need is a keyspan adaptor to a 9 pin.
Well, all is set up and plugged in but i don't see any options for deck control or timecode.
I keep getting message that there are no serial ports on the computer.
We need this for a client who came in last min. who needs this stuff digitized for and offline edit at DV res.
What am i missing here...is there something i need to update?OK, forgive me if you've done these steps but here is how I set up my Keyspan.
Install the KeySpan drivers (2.3 or better), restart, then insert Keyspan adaptor, launch Keyspan Serial Assistant from Applications, click the arrow to list serial ports, you should see three, KeySerial1 is a dummy and the other two verify the presence of the adaptor. Close the Assistant app.
Launch Final Cut, go into Audio/Video Settings, Device Control Presets, Duplicate or Edit an unlocked Preset with the following settings, these are what I use for a BVW-65 and BVW-70 in NTSC:
Protocol: Sony RS-422
Audio Mapping: 2 Channels
Time Source: LTC
Port: USA28X191P1.1
Frame Rate 29.97
Select to: Use Deck Search Mechanism
Capture offset: 1
Playback Offset: +0:01
Timecode will be read through the RS-422 protocol (via KeySpan)
and if your connected to the proper Keyspan port (1) with the proper, working adapter cable to the proper connector on the machine (Remote-1 for BVWs) you should have communication with the machine. If not, I would stongly suspect the Keyspan. -
How can I use multiple front panel controls to be mirrors of each other?
Hi All:
I know this is going to be a strange question, but I have multiple inputs that control one output. This in itself not necessarily difficult, but I have a strange need. If one of the control inputs change I would like this to be indicated by the other controls. For example, I have a slider, numeric and dial controls on the front panel that control RPM. If the slider changes to 1000 RPM I would like the numeric and dial controls to see that change. Is this possible. If so, can you give me advice on doing this. I am using 7.1. Thanks for the help.
John HonnoldWhat you want is not that hard, but asked for a rather limited times.
Here's a how to:
Drop a slider
Right click Visible items-> Digital display
Right click on the slider Advanced-> Customize
Right click on the Digital display Replace select the control you want to replace it with (a gauge for instance)
Right click on the Gauge Visible items -> Digital Display
Now you have one control with three control options:
This was done in 8.2 but I think the same goes for 7.1
Ton
Message Edited by TonP on 04-06-2009 09:52 AM
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Attachments:
Example_VI.png 7 KB -
How to use Multiple Check Box control to make a list of items in check box
I have a use case where i have to save update list of items required, and i want to implement it through viewobject and use Multiple check box control, how do i go about it? Code snippet will be helpful........
Edited by: jDev_08 on Nov 17, 2012 8:31 PMHi,
Always mention your JDev version.
Check out the ADF Faces Demo : http://jdevadf.oracle.com/adf-richclient-demo/faces/components/index.jspx#%2Fcomponents%2FselectManyCheckbox.jspx (Hint : Code snippet is available in there itself).
-Arun -
Can I use my Maschine knobs to control multiple instruments "smart controls" in LPX independently?
Can I use 1 hardware contoller to control multiple instruments "smart controls" in LPX? For example....if I mapped 1 instrument's smart controls to my maschine contoller would it overwrite them if I mapped another instruments smart controls to them? I'm wondering if I can switch between mapping's based on which instrument/track I have selected. I know I can do this with quick learn feature....problem is you can only use 1 knob with it.
Thank you for your help, my example is working. Please look the my revised example and let me know if I'm making it more complicated than necessary. In order for it to work,
1. I created a cluster on my front panel to hold the control group reference numbers,
2. Converted it to typedef,
3. Used bundle with name to stuff the control reference numbers into my RefCluster,
4. Used the RefCluster typedef in my subVI,
5. In the subVI, I had to add a variant to data command before using the data.
I also extended the example to actually change values on the front panel to verify that it worked as I intended.
Ken
Attachments:
typedefexample2.zip 28 KB -
Is it possible to control a videotape machine/deck with FME
as the encoder? My deck supports either IEEE or serial port control
of the device.
Thanks.Moin, I have been successful getting an audio and video
signal into the encoder. My inquiry is whether or not you can
control the tape deck, with "in" and 'out" points for capture, much
like the digitizing feature of most NLE editing systems. -
hi, our tv station has a final cut pro HD editor, version 4.5, connected to a DVC-Pro AJ-D650 via a 'keyspan USA-19H' usb adapter. i've tried every protocal setting on final cut, but continue to get an error when we edit to tape. when connected to a DVC-Pro AJ-D230H, it worked fine. my question is, do we need to fix the deck or are there compatibility issues with the AJ-D650 deck? thanks!!
Quad G5 Mac OS X (10.4.9)10.4.9 and FCP 4.5 have issues. There is some recent noise about how spotlight has a role in the system breakdown.
Do a search here an the relevant threads should pop up.
x -
How to generate a new segment in IDoc for multiple occurance of Control Num
Hi Experts,
In my scenario, i need to generate a new segment in IDoc(Target Structure) based on Control Number Field in the Source Structure.
The segment need to be created for multiple occurance of the Control Number.
Ex:
Control Number - 100 appears 5 times in Source Structure.This control Number is mapped to one of the Field in the Segment of IDoc.
Now my requirement is to generate the Segment 5 times with respective to this Control Number.
please help me out to resolve this issue.
Thanks,
Kish.Hi,
Here is the XML Structure of my Source:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:GoodsReceipt_MT xmlns:ns0="urn:WOL-com:XI:data:HJ:10">
<row>
<CONTROL_NUMBER>111</CONTROL_NUMBER>
<LINE_NUMBER>1111</LINE_NUMBER>
<CONTROL_NUMBER_2/>
<OUTSIDE_ID/>
<WH_ID>111111</WH_ID>
<LOCATION_ID/>
<HU_ID>11111</HU_ID>
<NUM_ITEMS/>
<ITEM_NUMBER>111111</ITEM_NUMBER>
<CONTROL_NUMBER_3>LR</CONTROL_NUMBER_3>
<LOT_NUMBER>11111</LOT_NUMBER>
<UOM>11111</UOM>
</row>
<row>
<CONTROL_NUMBER>111</CONTROL_NUMBER>
<LINE_NUMBER>12222</LINE_NUMBER>
<CONTROL_NUMBER_2/>
<OUTSIDE_ID/>
<WH_ID>12222</WH_ID>
<LOCATION_ID/>
<HU_ID>1222</HU_ID>
<NUM_ITEMS/>
<ITEM_NUMBER>112222</ITEM_NUMBER>
<TRAN_QTY>112222</TRAN_QTY>
<CONTROL_NUMBER_3>LR</CONTROL_NUMBER_3>
<LOT_NUMBER>12222</LOT_NUMBER>
<UOM>1122222</UOM>
</row>
<row>
<CONTROL_NUMBER>222</CONTROL_NUMBER>
<LINE_NUMBER>2222</LINE_NUMBER>
<CONTROL_NUMBER_2/>
<OUTSIDE_ID/>
<WH_ID>22222</WH_ID>
<LOCATION_ID/>
<HU_ID>222222</HU_ID>
<NUM_ITEMS/>
<ITEM_NUMBER>2222222</ITEM_NUMBER>
<TRAN_QTY>22222222</TRAN_QTY>
<LOCATION_ID_2>33333333</LOCATION_ID_2>
<CONTROL_NUMBER_3>LR</CONTROL_NUMBER_3>
<LOT_NUMBER>22222</LOT_NUMBER>
<UOM>22222</UOM>
</row>
<row>
<CONTROL_NUMBER>333</CONTROL_NUMBER>
<LINE_NUMBER>3333</LINE_NUMBER>
<CONTROL_NUMBER_2/>
<OUTSIDE_ID/>
<WH_ID>33333</WH_ID>
<LOCATION_ID/>
<HU_ID>33333</HU_ID>
<NUM_ITEMS/>
<ITEM_NUMBER>333333</ITEM_NUMBER>
<TRAN_QTY>33333333</TRAN_QTY>
<CONTROL_NUMBER_3>LR</CONTROL_NUMBER_3>
<LOT_NUMBER>33333</LOT_NUMBER>
<UOM>333333</UOM>
</row>
</ns0:GoodsReceipt_MT>
Now Control_Number 111 occurs 2 times, 222 & 333 occurs 1 time.
Now one IDoc for 111,222 & 333 should be generated.
But Control_number 111 appears 2 times.
Now the data in the 2 rows should be passed to Single IDoc by repeating the segments inside the IDoc.
As u said i changed the Occurance of IDoc to 0...unbound and imported as External Definition. I have done upto Generating IDoc for each unique Control_Number.
I stuck up at repeating the Segments in the IDoc.
So please help me out.
Thanks,
Kish. -
ADF11g: methodAction being invoked multiple times without control...
Hi,
I have a page that displays different data took from a single data control.
This datacontrol is invoked by a methodAction, and the resulting bean contains both plain attributes and List of objects.
I created my page with JDev 11.1.1.3.0, using drag and drop.
What happens (seeing the log files) is that the page calls multiple times the methodAction instead of "recognizing" it only needs to call it 1 time to have all the data bound to the page,
and of course the page does not work. I don't see the data even if the dataControls retrieve it.
Here is my code:
Page:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:c="http://java.sun.com/jsp/jstl/core">
<c:set var="viewcontrollerBundle"
value="#{adfBundle['sop.view.ViewControllerBundle']}"/>
<af:pageTemplate viewId="/WEB-INF/templates/dettagliOggettoCoinvoltoTemplate.jspx"
id="pt1">
<f:attribute name="dataOraUltimoAggiornamento"
value="#{pageFlowScope.stazione.currentDateTime}"/>
<f:attribute name="drillDownTab1Title" value="Treni In Arrivo"/>
<f:facet name="overviewOggettoCoinvoltoArea">
<af:panelGroupLayout id="pgl3" valign="middle" halign="left"
layout="horizontal">
<!-- rendered="#{bindings._stazione.inputValue != null}"-->
<af:panelGroupLayout id="pgl5" layout="vertical">
<af:panelBox text="Info Stazione" id="pb1">
<af:panelGroupLayout id="pgl8" layout="vertical">
<af:panelLabelAndMessage label="Stazione:" id="plam1">
<af:outputFormatted value="#{bindings._stazione.inputValue}"
id="of1"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Situazione:" id="plam2">
<af:outputFormatted value="#{bindings.situazione.inputValue}"
id="of2"/>
</af:panelLabelAndMessage>
</af:panelGroupLayout>
</af:panelBox>
<af:panelBox text="Info TVM" id="pb3">
<f:facet name="toolbar"/>
<af:panelGroupLayout id="pgl10" layout="vertical">
<af:panelLabelAndMessage label="Numero TVM:" id="plam10">
<af:outputFormatted value="#{bindings.numTVM.inputValue}"
id="of10"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Allarmi TVM:" id="plam11">
<af:outputFormatted value="#{bindings.numAllarmiTVM.inputValue}"
id="of11"/>
</af:panelLabelAndMessage>
</af:panelGroupLayout>
</af:panelBox>
</af:panelGroupLayout>
<af:panelGroupLayout id="pgl6" layout="vertical">
<af:panelBox text="Info RFI" id="pb2">
<f:facet name="toolbar"/>
<af:panelGroupLayout id="pgl9" layout="vertical">
<af:panelLabelAndMessage label="Tel RFI:" id="plam6">
<af:outputFormatted value="#{bindings.telRFI.inputValue}"
id="of6"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Cell RFI:" id="plam3">
<af:outputFormatted value="#{bindings.cellRFI.inputValue}"
id="of3"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Fax RFI:" id="plam5">
<af:outputFormatted value="#{bindings.faxRFI.inputValue}"
id="of5"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Email RFI:" id="plam4">
<af:outputFormatted value="#{bindings.emailRFI.inputValue}"
id="of4"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Tel PRM:" id="plam7">
<af:outputFormatted value="#{bindings.telPRM.inputValue}"
id="of7"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Fax PRM:" id="plam8">
<af:outputFormatted value="#{bindings.faxPRM.inputValue}"
id="of8"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Email PRM:" id="plam9">
<af:outputFormatted value="#{bindings.emailPRM.inputValue}"
id="of9"/>
</af:panelLabelAndMessage>
</af:panelGroupLayout>
</af:panelBox>
</af:panelGroupLayout>
<af:panelGroupLayout id="pgl4" layout="vertical">
<af:panelBox text="News" id="pb8">
<f:facet name="toolbar"/>
<af:panelGroupLayout id="pgl16">
<af:panelFormLayout id="pfl1">
<af:iterator id="i1" value="#{bindings.result1.collectionModel}"
var="current">
<af:panelLabelAndMessage label="Titolo" id="plam15">
<af:outputFormatted value="#{current.title}" id="of15"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Autore" id="plam14">
<af:outputFormatted value="#{current.author}" id="of12"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Data Pubblicazione"
id="plam12">
<af:outputFormatted value="#{current.pubDate}" id="of14">
<af:convertDateTime pattern="yyyy-MM-dd HH:mm"/>
</af:outputFormatted>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Contenuto" id="plam13">
<af:outputText escape="false"
value="#{current.description.value}"
id="ot13"/>
</af:panelLabelAndMessage>
</af:iterator>
</af:panelFormLayout>
</af:panelGroupLayout>
</af:panelBox>
</af:panelGroupLayout>
</af:panelGroupLayout>
</f:facet>
<f:facet name="drillDownView1Area">
<af:panelGroupLayout id="pgl12">
</af:panelGroupLayout>
</f:facet>
<f:facet name="drillDownView2Area">
<af:panelGroupLayout id="pgl13">
</af:panelGroupLayout>
</f:facet>
<f:attribute name="drillDownTab2Title" value="Treni In partenza"/>
<f:attribute name="drillDownTab3Title" value="Personale"/>
<f:attribute name="drillDownTab4Rendered" value="true"/>
<f:attribute name="drillDownTab4Title" value="Allarmi"/>
<f:attribute name="overviewOggettoCoinvoltoAreaTitle"
value="Agenda Servizio Stazione"/>
<f:facet name="drillDownView4Area">
/af:table>
-->
</f:facet>
<f:facet name="drillDownView3Area">
</f:facet>
</af:pageTemplate>
</jsp:root>PageDef:
<?xml version="1.0" encoding="UTF-8" ?>
<pageDefinition xmlns="http://xmlns.oracle.com/adfm/uimodel"
version="11.1.1.56.60"
id="visualizzazioneDettagliStazionePageDef" Package="fragments">
<parameters/>
<executables>
<variableIterator id="variables"/>
<methodIterator Binds="generaAgendaServizioStazione.result"
DataControl="StazioniServicePojo" RangeSize="25"
BeanClass="sop.model.beans.agendaServizioStazione.BeanAgendaServizioStazione"
id="generaAgendaServizioStazioneIterator"/>
<accessorIterator MasterBinding="generaAgendaServizioStazioneIterator"
Binds="datiStazione" RangeSize="25"
DataControl="StazioniServicePojo"
BeanClass="sop.model.beans.agendaServizioStazione.BeanStazione"
id="datiStazioneIterator"/>
<accessorIterator MasterBinding="datiStazioneIterator" Binds="infoTVM"
RangeSize="25" DataControl="StazioniServicePojo"
BeanClass="sop.model.stazioniService.InfoTVM"
id="infoTVMIterator"/>
<accessorIterator MasterBinding="datiStazioneIterator" Binds="infoRFI"
RangeSize="10" DataControl="StazioniServicePojo"
BeanClass="sop.model.stazioniService.InfoRFI"
id="infoRFIIterator"/>
<methodIterator id="readRSSStazioneIter" Binds="readRSSStazione.result"
DataControl="RssServicePojo" RangeSize="25"
BeanClass="com.sun.syndication.feed.rss.Item"/>
</executables>
<bindings>
<methodAction id="generaAgendaServizioStazione" RequiresUpdateModel="true"
Action="invokeMethod" MethodName="generaAgendaServizioStazione"
IsViewObjectMethod="false" DataControl="StazioniServicePojo"
InstanceName="StazioniServicePojo.dataProvider"
ReturnName="StazioniServicePojo.methodResults.generaAgendaServizioStazione_StazioniServicePojo_dataProvider_generaAgendaServizioStazione_result">
<NamedData NDName="locationCode"
NDValue="#{pageFlowScope.stazione.stazione.locationCode}"
NDType="java.lang.String"/>
<NamedData NDName="dataRichiesta"
NDValue="#{pageFlowScope.stazione.dataRichiesta}"
NDType="java.util.Calendar"/>
</methodAction>
<attributeValues IterBinding="datiStazioneIterator" id="situazione">
<AttrNames>
<Item Value="situazione"/>
</AttrNames>
</attributeValues>
<attributeValues IterBinding="datiStazioneIterator" id="_stazione">
<AttrNames>
<Item Value="_stazione"/>
</AttrNames>
</attributeValues>
<attributeValues IterBinding="infoTVMIterator" id="numTVM">
<AttrNames>
<Item Value="numTVM"/>
</AttrNames>
</attributeValues>
<attributeValues IterBinding="infoTVMIterator" id="numAllarmiTVM">
<AttrNames>
<Item Value="numAllarmiTVM"/>
</AttrNames>
</attributeValues>
<attributeValues IterBinding="infoRFIIterator" id="telRFI">
<AttrNames>
<Item Value="telRFI"/>
</AttrNames>
</attributeValues>
<attributeValues IterBinding="infoRFIIterator" id="faxRFI">
<AttrNames>
<Item Value="faxRFI"/>
</AttrNames>
</attributeValues>
<attributeValues IterBinding="infoRFIIterator" id="cellRFI">
<AttrNames>
<Item Value="cellRFI"/>
</AttrNames>
</attributeValues>
<attributeValues IterBinding="infoRFIIterator" id="emailRFI">
<AttrNames>
<Item Value="emailRFI"/>
</AttrNames>
</attributeValues>
<attributeValues IterBinding="infoRFIIterator" id="telPRM">
<AttrNames>
<Item Value="telPRM"/>
</AttrNames>
</attributeValues>
<attributeValues IterBinding="infoRFIIterator" id="faxPRM">
<AttrNames>
<Item Value="faxPRM"/>
</AttrNames>
</attributeValues>
<attributeValues IterBinding="infoRFIIterator" id="emailPRM">
<AttrNames>
<Item Value="emailPRM"/>
</AttrNames>
</attributeValues>
<methodAction id="readRSSStazione" InstanceName="RssServicePojo.dataProvider"
DataControl="RssServicePojo" RequiresUpdateModel="true"
Action="invokeMethod" MethodName="readRSSStazione"
IsViewObjectMethod="false"
ReturnName="RssServicePojo.methodResults.readRSSStazione_RssServicePojo_dataProvider_readRSSStazione_result">
<NamedData NDName="stazioneLocationCode"
NDValue="#{pageFlowScope.stazione.stazione.locationCode}"
NDType="java.lang.String"/>
</methodAction>
<tree IterBinding="readRSSStazioneIter" id="result1">
<nodeDefinition DefName="com.sun.syndication.feed.rss.Item" Name="result10">
<AttrNames>
<Item Value="title"/>
<Item Value="author"/>
<Item Value="uri"/>
<Item Value="pubDate"/>
</AttrNames>
<Accessors>
<Item Value="description"/>
</Accessors>
</nodeDefinition>
<nodeDefinition DefName="com.sun.syndication.feed.rss.Description"
Name="result11">
<AttrNames>
<Item Value="type"/>
<Item Value="value"/>
</AttrNames>
</nodeDefinition>
</tree>
</bindings>
</pageDefinition>The datacontrols are standard pojo data controls.
Can someone point me out to the solution ? Why methodAction is called multiple times ?Does someone has any clues ?!
-
Multiple selection with control key in ring, enum, or radio buttons on Speedy-33 ?
Hi all,
I want to create a list of entries via ring, enum, or radio buttons. I just want the user to be able to select more than one entry from the list.. This is normally doable with windows applications by using control key. However, how could I do the same thing or let the user choose more than one entry from the list? Any idea is greatly appreciated..
Thanks so much!Hi Casiopea -
To answer your question, I'm not sure I've ever actually seen a ring, enum, or radio button control exhibit the "CTRL+click" behavior you're describing. (In fact, I think all of those user interface elements are designed specifically so that only one value can be selected at any one time.)
However, I have seen plenty of list boxes allow multiple selection, and LabVIEW's list boxes can do the same. A group of checkboxes can also end up looking like radio buttons if you group them with some "decoration" and would allow you to select multiple options (because you can check/uncheck each box independently).
I'm not quite sure, though, how your question relates to LEGO specifically. Did you accidentally post this question to the wrong discussion forum?
To address Eagles Coach's statements, the official Move block uses checkboxes in the "Port" section of the configuration pane in the MINDSTORMS software, not radio buttons. The Motor block uses mostly radio buttons, and I didn't see any sections that allow multiple selections.
James Blair
NI R&D
Maybe you are looking for
-
How to put data into a RFC import parameter structure from portal
Hi, All, I have a RFC in which an import parameter is a structure (not a table). I want to put data into that structure. I know how to put data into a table or a string. I tried to use IRecordSet MyTABStr = (IRecordSet)structureFactory.getStructure(f
-
Hi all, I set up a navigation between two wd applications within the portal. The navigation will open a new window once the user clicks a button in the first application. The navigation itself works well, however, the new window is always shown behin
-
Using custom images for radiobuttons
Hi I'm looking for help with creating a radio buttons with external images (fetched from XML/Javascript file) cause, I don't want to use standard looking radio buttons from components. I wish to use different images for each state of the button. Any
-
Firefox crashes sometimes and to my opinion to often, what can I do, to avoid this
for instance, when I write an E. -Mail (GMX), or I have opened two or three various windows on my computer.
-
Premiere cc 2014 crashed; error 600
Please help