Multiple delivery schedule (with same delivery date) for same PO line item

Hi All,
In a STO, for a PO line item say for 10 quantities. I have been receiving 3 delivery schedule with the same day with quantities say 5 3 2. I would like to know the what would be possible reasons for this.
Regards,
PSS

Hi PSS,
I had the similar issue there is a report which gives you the reason for delivery split
Please refer to the following thread
Multiple deliveries created
Thanks
Diwakar

Similar Messages

Output the requested delivery date for each different line item

Hello Experts
I have program called ZFSFSF(following), in the output Its showing multiple requested delvery dates per line item.
But We need to show the requested delivery date for each different line item.
Any code is highly appreciated. I wud appreacite if you cud bold the added code.
Thanks
SP
TYPE-POOLS: slis.
TABLES: vbap, vbrk, vbfa, vbak, vbrp, konv, kna1, bkpf, bsad, bkpf_bsad,
knvv, pa0002, t005u, mvke, lips, likp, vbpa, vbep.
DATA: BEGIN OF i_list OCCURS 0,
vbeln LIKE vbak-vbeln,
posnr LIKE vbap-posnr,
matnr LIKE vbap-matnr,
erdat LIKE vbap-erdat,
mvgr1 LIKE mvke-mvgr1,
wadat_ist LIKE likp-wadat_ist,
days TYPE i,
werks LIKE vbap-werks,
lgort LIKE vbap-lgort,
kwmeng LIKE vbap-kwmeng," CH01+
lfimg LIKE lips-lfimg," CH01+
pstyv LIKE vbap-pstyv," CH01+
obd LIKE lips-vbeln," CH01+
obd_pos LIKE lips-posnr," CH01+
soldto LIKE vbaK-kunnr," JR+
shipto LIKE vbpa-kunnr," JR+
edatu like vbep-edatu," PR+
END OF i_list.
DATA: i_list2 LIKE i_list OCCURS 0 WITH HEADER LINE,
i_list3 LIKE i_list OCCURS 0 WITH HEADER LINE.
DATA: i_list4 LIKE vbap OCCURS 0 WITH HEADER LINE.
*ALV Output Header
DATA: gt_list_top_of_page TYPE slis_t_listheader,
prognm LIKE sy-repid,
gc_formname_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE',
gt_events TYPE slis_t_event,
is_layout TYPE slis_layout_alv,
is_variant LIKE disvariant,
it_sort TYPE slis_t_sortinfo_alv WITH HEADER LINE.
DATA:gt_fieldcat TYPE slis_t_fieldcat_alv.
DATA:gt_outtab LIKE i_list OCCURS 0 WITH HEADER LINE.
DATA: g_repid LIKE sy-repid,
g_count LIKE sy-tabix.
SELECTION-SCREEN BEGIN OF BLOCK block0 WITH FRAME TITLE text-t01.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(79) text-t10.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(79) text-t11.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(79) text-t12.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN END OF BLOCK block0.
*/ Selection and Input Parameters
SELECTION-SCREEN BEGIN OF BLOCK blocko WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln, "SO
s_auart FOR vbak-auart DEFAULT 'KB' OBLIGATORY,
s_matnr FOR vbap-matnr," obligatory,
s_mvgr1 FOR mvke-mvgr1,
s_erdat FOR vbap-erdat OBLIGATORY,
s_werks FOR vbap-werks,
s_lgort FOR vbap-lgort,
s_edatu FOR vbep-edatu.
PARAMETERS: p_vkorg LIKE vbak-vkorg DEFAULT '5010'.
SELECTION-SCREEN SKIP 2.
+EC1
Addition +EC1
+EC1
PARAMETERS: p_vari LIKE disvariant-variant.
+EC1
End Addition +EC1
+EC1
SELECTION-SCREEN END OF BLOCK blocko.
+EC1
Addition +EC1
+EC1
DATA: g_save(1) TYPE c,
g_default(1) TYPE c,
g_exit(1) TYPE c,
gx_variant LIKE disvariant,
g_variant LIKE disvariant.
+EC1
End Addition +EC1
+EC1
Initialization fieldcatalog
INITIALIZATION.
PERFORM clear_tables.
g_repid = sy-repid.
PERFORM fieldcat_init USING gt_fieldcat[].
+EC1
Addition +EC1
+EC1
g_save = 'A'.
PERFORM variant_init.
Get default variant
gx_variant = g_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = g_save
CHANGING
cs_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = gx_variant-variant.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
AT SELECTION-SCREEN.
PERFORM auth_check. "+ESC
PERFORM pai_of_selection_screen.
+EC1
End Addition +EC1
+EC1
START-OF-SELECTION.
PERFORM get_data.
PERFORM alv.
END-OF-SELECTION.
FORM get_data *
FORM get_data.
*CH01 - Added kwmeng(order qty) to selection, excluded rejects
*JR -added soldto and shipto code
SELECT avbeln aposnr amatnr aerdat awerks algort
akwmeng apstyv bkunnr cedatu
CH01+
INTO
(i_list-vbeln, i_list-posnr, i_list-matnr, i_list-erdat, i_list-werks,
i_list-lgort,
i_list-kwmeng , i_list-pstyv, i_list-soldto,i_list-edatu)
CH01+
FROM vbap AS a INNER JOIN vbak AS b ON avbeln = bvbeln
INNER JOIN vbep AS c ON avbeln = cvbeln
WHERE b~vkorg = p_vkorg
AND a~werks IN s_werks
AND a~lgort IN s_lgort
AND b~auart IN s_auart
AND a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~abgru = ''" CH01+
AND a~matnr IN s_matnr
AND c~edatu IN s_edatu.
APPEND i_list.
ENDSELECT.
COMMIT WORK AND WAIT.
LOOP AT i_list.
SELECT SINGLE mvgr1 INTO i_list-mvgr1 FROM mvke
WHERE matnr = i_list-matnr.
MODIFY i_list.
CLEAR: i_list.
ENDLOOP.
COMMIT WORK AND WAIT.
LOOP AT i_list.
IF i_list-mvgr1 IN s_mvgr1.
CONTINUE.
ELSE.
DELETE i_list.
COMMIT WORK AND WAIT.
ENDIF.
ENDLOOP.
CH01 - commented these lines out and redid logic below
LOOP AT i_list.
select single vbeln into lips-vbeln from lips
where vgbel = i_list-vbeln
and vgpos = i_list-posnr.
select single wadat_ist into i_list-wadat_ist from likp
where vbeln = lips-vbeln.
SELECT b~wadat_ist INTO i_list-wadat_ist
FROM lips AS a INNER JOIN
likp AS b ON avbeln = bvbeln WHERE a~vgbel = i_list-vbeln
AND a~vgpos = i_list-posnr.
MODIFY i_list.
CLEAR: i_list, lips-vbeln.
ENDSELECT.
ENDLOOP.
CH01 - Changed to select multiple delivery lines & del qty
summing the total deliveries per OBD# and date
LOOP AT i_list.
SELECT avbeln sum( alfimg ) b~wadat_ist
INTO (i_list-obd , i_list-lfimg , i_list-wadat_ist)
FROM lips AS a INNER JOIN
likp AS b ON avbeln = bvbeln WHERE a~vgbel = i_list-vbeln
AND a~vgpos = i_list-posnr
AND a~pstyv = i_list-pstyv
group by avbeln bwadat_ist.
i_list2 = i_list.
APPEND i_list2.
ENDSELECT.
IF sy-subrc <> 0.
i_list2 = i_list.
APPEND i_list2.
ENDIF.
ENDLOOP.
i_list[] = i_list2[].
*End CH01
COMMIT WORK AND WAIT.
LOOP AT i_list.
IF i_list-wadat_ist IS INITIAL.
CONTINUE.
ELSE.
i_list-days = i_list-wadat_ist - i_list-erdat.
ENDIF.
MODIFY i_list.
CLEAR: i_list.
COMMIT WORK AND WAIT.
ENDLOOP.
COMMIT WORK AND WAIT.
LOOP AT i_list.
IF i_list-vbeln IS INITIAL.
DELETE i_list.
ENDIF.
ENDLOOP.
COMMIT WORK AND WAIT.
*JR
LOOP AT i_list.
SELECT SINGLE KUNNR INTO i_list-shipto FROM vbpa
WHERE vbeln = i_list-vbeln
AND parvw = 'WE'.
MODIFY i_list.
ENDLOOP.
*END JR
gt_outtab[] = i_list[].
COMMIT WORK AND WAIT.
ENDFORM.
FORM alv *
FORM alv.
PERFORM e03_eventtab_build USING gt_events[]. "+EC1
PERFORM e04_comment_build USING gt_list_top_of_page[]. "+EC1
prognm = sy-repid. "+EC1
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_user_command = 'USER_COMMAND'
i_callback_program = g_repid
it_fieldcat = gt_fieldcat[]
it_events = gt_events[] "+ESC
it_sort = it_sort[]
+EC1
Addition +EC1
+EC1
is_variant = g_variant
i_save = g_save
+EC1
End Addition +EC1
+EC1
TABLES
t_outtab = gt_outtab.
COMMIT WORK AND WAIT.
ENDFORM.
FORM fieldcat_init *
--> I_FIELDCAT *
FORM fieldcat_init
USING i_fieldcat TYPE slis_t_fieldcat_alv.
DATA: ls_fieldcat TYPE slis_fieldcat_alv.
DATA: pos TYPE i VALUE 1.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'VBELN'.
ls_fieldcat-ref_tabname = 'VBAK'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'POSNR'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'MATNR'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'MVGR1'.
ls_fieldcat-ref_tabname = 'MVKE'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'WERKS'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'LGORT'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'ERDAT'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'WADAT_IST'.
ls_fieldcat-ref_tabname = 'LIKP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'DAYS'.
ls_fieldcat-ref_fieldname = 'DAYS'.
ls_fieldcat-seltext_s = '# Of Days'.
ls_fieldcat-seltext_m = '# Of Days'.
ls_fieldcat-seltext_l = '# Of Days'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*Begin CH01
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'KWMENG'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-outputlen = 7.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'LFIMG'.
ls_fieldcat-ref_tabname = 'LIPS'.
ls_fieldcat-outputlen = 7.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'OBD'.
ls_fieldcat-seltext_s = 'OBD'.
ls_fieldcat-seltext_m = 'Outbound Del'.
ls_fieldcat-seltext_l = 'Outbound Delivery'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'OBD_POS'.
ls_fieldcat-seltext_s = 'OBD Ln'.
ls_fieldcat-seltext_m = 'Outbound Del Ln'.
ls_fieldcat-seltext_l = 'Outbound Del Line'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*End CH01
*JR
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'SOLDTO'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-seltext_m = 'Sold To'.
ls_fieldcat-seltext_l = 'Sold To'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'SHIPTO'.
ls_fieldcat-ref_tabname = 'VBPA'.
ls_fieldcat-seltext_m = 'Ship To'.
ls_fieldcat-seltext_l = 'Ship To'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*END JR
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'EDATU'.
ls_fieldcat-ref_tabname = 'VBEP'.
ls_fieldcat-seltext_m = 'Requested Delivery date'.
ls_fieldcat-seltext_l = 'Requested Delivery date'.
ls_fieldcat-outputlen = 20.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*FOR ALV SORT & SUBTOTAL
CLEAR it_sort.
it_sort-spos = '0'.
it_sort-fieldname = 'VBELN'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '1'.
it_sort-fieldname = 'POSNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '2'.
it_sort-fieldname = 'MATNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '3'.
it_sort-fieldname = 'MVGR1'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '4'.
it_sort-fieldname = 'ERDAT'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '5'.
it_sort-fieldname = 'WADAT_IST'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-down = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '6'.
it_sort-fieldname = 'PERNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '7'.
it_sort-fieldname = 'VORNA'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '8'.
it_sort-fieldname = 'NACHN'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '9'.
it_sort-fieldname = 'VKGRP'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '10'.
it_sort-fieldname = 'VBELN'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '11'.
it_sort-fieldname = 'ERDAT'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '12'.
it_sort-fieldname = 'BEZEI'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
clear it_sort.
it_sort-spos = '1'.
it_sort-fieldname = 'BELNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
append it_sort.
ENDFORM.
+EC1
Addition +EC1
+EC1
*& Form VARIANT_INIT
text
--> p1 text
<-- p2 text
FORM variant_init.
CLEAR g_variant.
g_variant-report = g_repid.
ENDFORM. " VARIANT_INIT
FORM f4_for_variant *
FORM f4_for_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = g_variant
i_save = g_save
it_default_fieldcat =
IMPORTING
e_exit = g_exit
es_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
IF g_exit = space.
p_vari = gx_variant-variant.
ENDIF.
ENDIF.
ENDFORM.
*& Form PAI_OF_SELECTION_SCREEN
text
FORM pai_of_selection_screen.
IF NOT p_vari IS INITIAL.
MOVE g_variant TO gx_variant.
MOVE p_vari TO gx_variant-variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
i_save = g_save
CHANGING
cs_variant = gx_variant.
g_variant = gx_variant.
ELSE.
PERFORM variant_init.
ENDIF.
ENDFORM. " PAI_OF_SELECTION_SCREEN
+EC1
End Addition +EC1
+EC1
FORM e03_eventtab_build *
--> E03_LT_EVENTS *
FORM e03_eventtab_build USING e03_lt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = e03_lt_events.
READ TABLE e03_lt_events WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE gc_formname_top_of_page TO ls_event-form.
APPEND ls_event TO e03_lt_events.
ENDIF.
ENDFORM.
FORM e04_comment_build *
--> E04_LT_TOP_OF_PAGE *
FORM e04_comment_build USING e04_lt_top_of_page TYPE slis_t_listheader.
DATA: ls_line TYPE slis_listheader.
*Report Title
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = text-007.
APPEND ls_line TO e04_lt_top_of_page.
**Doc Type Desc.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-008.
ls_line-info = p_matnr.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-009.
ls_line-info = p_werks.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-010.
ls_line-info = p_stlan.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-011.
ls_line-info = p_stlal.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-012.
ls_line-info = p_stlal.
append ls_line to e04_lt_top_of_page.
ENDFORM.
FORM top_of_page *
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = gt_list_top_of_page.
ENDFORM.
FORM auth_check *
FORM auth_check.
AUTHORITY-CHECK OBJECT 'V_VBAK_VKO'
ID 'VKORG' FIELD p_vkorg.
IF sy-subrc NE 0.
MESSAGE e054 WITH p_vkorg.
ENDIF.
ENDFORM. " auth_check
*& Form USER_COMMAND
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
WHEN '&IC1'.
PERFORM display_so_order USING r_ucomm
rs_selfield.
ENDCASE.
ENDFORM.
*& Form display_sales_order
text
-->P_R_UCOMM text
-->P_RS_SELFIELD text
FORM display_so_order USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE rs_selfield-sel_tab_field.
WHEN '1-VBELN'.
SET PARAMETER ID 'AUN' FIELD rs_selfield-value.
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
WHEN '1-MATNR'.
SET PARAMETER ID 'MAT' FIELD rs_selfield-value.
CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
WHEN '1-OBD'.
SET PARAMETER ID 'VL' FIELD rs_selfield-value.
CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN.
WHEN OTHERS.
MESSAGE i000(z1) WITH 'Please Click on the Valid Selection'.
EXIT.
ENDCASE.
ENDFORM. " display_sales_order
FORM EDit_table *

> TYPE-POOLS: slis.
>
> TABLES: vbap, vbrk, vbfa, vbak, vbrp, konv, kna1,
> bkpf, bsad, bkpf_bsad,
> knvv, pa0002, t005u, mvke, lips, likp, vbpa, vbep.
>
> DATA: BEGIN OF i_list OCCURS 0,
> vbeln LIKE vbak-vbeln,
> posnr LIKE vbap-posnr,
 etenr like vbep-etenr,
> matnr LIKE vbap-matnr,
> erdat LIKE vbap-erdat,
> mvgr1 LIKE mvke-mvgr1,
> wadat_ist LIKE likp-wadat_ist,
> days TYPE i,
> werks LIKE vbap-werks,
> lgort LIKE vbap-lgort,
> kwmeng LIKE vbap-kwmeng," CH01+
> lfimg LIKE lips-lfimg," CH01+
> pstyv LIKE vbap-pstyv," CH01+
> obd LIKE lips-vbeln," CH01+
> obd_pos LIKE lips-posnr," CH01+
> soldto LIKE vbaK-kunnr," JR+
> shipto LIKE vbpa-kunnr," JR+
> edatu like vbep-edatu," PR+
> END OF i_list.
>
> DATA: i_list2 LIKE i_list OCCURS 0 WITH HEADER LINE,
> i_list3 LIKE i_list OCCURS 0 WITH HEADER LINE.
>
> DATA: i_list4 LIKE vbap OCCURS 0 WITH HEADER LINE.
>
>
> *ALV Output Header
> DATA: gt_list_top_of_page TYPE slis_t_listheader,
> prognm LIKE sy-repid,
> gc_formname_top_of_page TYPE slis_formname VALUE
> 'TOP_OF_PAGE',
> gt_events TYPE slis_t_event,
> is_layout TYPE slis_layout_alv,
> is_variant LIKE disvariant,
> it_sort TYPE slis_t_sortinfo_alv WITH HEADER LINE.
>
> DATA:gt_fieldcat TYPE slis_t_fieldcat_alv.
> DATA:gt_outtab LIKE i_list OCCURS 0 WITH HEADER
> LINE.
>
> DATA: g_repid LIKE sy-repid,
> g_count LIKE sy-tabix.
>
> SELECTION-SCREEN BEGIN OF BLOCK block0 WITH FRAME
> TITLE text-t01.
>
> SELECTION-SCREEN: BEGIN OF LINE.
> SELECTION-SCREEN COMMENT 1(79) text-t10.
>
> SELECTION-SCREEN: END OF LINE.
>
> SELECTION-SCREEN: BEGIN OF LINE.
> SELECTION-SCREEN COMMENT 1(79) text-t11.
> SELECTION-SCREEN: END OF LINE.
>
> SELECTION-SCREEN: BEGIN OF LINE.
> SELECTION-SCREEN COMMENT 1(79) text-t12.
> SELECTION-SCREEN: END OF LINE.
>
> SELECTION-SCREEN END OF BLOCK block0.
>
> */ Selection and Input Parameters
> SELECTION-SCREEN BEGIN OF BLOCK blocko WITH FRAME
> TITLE text-001.
>
>
>
> SELECT-OPTIONS: s_vbeln FOR vbap-vbeln, "SO
> s_auart FOR vbak-auart DEFAULT 'KB' OBLIGATORY,
> s_matnr FOR vbap-matnr," obligatory,
> s_mvgr1 FOR mvke-mvgr1,
> s_erdat FOR vbap-erdat OBLIGATORY,
> s_werks FOR vbap-werks,
> s_lgort FOR vbap-lgort,
> s_edatu FOR vbep-edatu.
>
> PARAMETERS: p_vkorg LIKE vbak-vkorg DEFAULT '5010'.
>
>
>
> SELECTION-SCREEN SKIP 2.
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> PARAMETERS: p_vari LIKE disvariant-variant.
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
> SELECTION-SCREEN END OF BLOCK blocko.
>
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> DATA: g_save(1) TYPE c,
> * g_default(1) TYPE c,
> g_exit(1) TYPE c,
> gx_variant LIKE disvariant,
> g_variant LIKE disvariant.
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
>
> * Initialization fieldcatalog
> INITIALIZATION.
>
> * PERFORM clear_tables.
>
> g_repid = sy-repid.
> PERFORM fieldcat_init USING gt_fieldcat[].
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> g_save = 'A'.
> PERFORM variant_init.
> * Get default variant
> gx_variant = g_variant.
> CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
> EXPORTING
> i_save = g_save
> CHANGING
> cs_variant = gx_variant
> EXCEPTIONS
> not_found = 2.
> IF sy-subrc = 0.
> p_vari = gx_variant-variant.
> ENDIF.
>
> AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
> PERFORM f4_for_variant.
>
> AT SELECTION-SCREEN.
> PERFORM auth_check. "+ESC
> PERFORM pai_of_selection_screen.
>
>
>
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
>
>
> START-OF-SELECTION.
>
> PERFORM get_data.
>
> PERFORM alv.
>
> END-OF-SELECTION.
>
> *----
> -
> * FORM get_data *
> *----
> -
> * ........ *
> *----
> -
> FORM get_data.
> *CH01 - Added kwmeng(order qty) to selection,
> excluded rejects
> *JR -added soldto and shipto code
SELECT a~vbeln a~posnr a~matnr a~erdat a~werks a~lgort
a~kwmeng a~pstyv b~kunnr c~edatu
CH01+
INTO corresponding fields of table i_list
FROM vbap AS a INNER JOIN vbak AS b ON a~vbeln = b~vbeln
INNER JOIN vbep AS c ON a~vbeln = c~vbeln
and a~posnr = c~posnr
WHERE b~vkorg = p_vkorg
AND a~werks IN s_werks
AND a~lgort IN s_lgort
AND b~auart IN s_auart
AND a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~abgru = ''" CH01+
AND a~matnr IN s_matnr
AND c~edatu IN s_edatu.
> COMMIT WORK AND WAIT.
>
> LOOP AT i_list.
> SELECT SINGLE mvgr1 INTO i_list-mvgr1 FROM mvke
> WHERE matnr = i_list-matnr.
> MODIFY i_list.
> CLEAR: i_list.
> ENDLOOP.
> COMMIT WORK AND WAIT.
>
> LOOP AT i_list.
> IF i_list-mvgr1 IN s_mvgr1.
> CONTINUE.
> ELSE.
> DELETE i_list.
> COMMIT WORK AND WAIT.
> ENDIF.
> ENDLOOP.
> * CH01 - commented these lines out and redid logic
> below
> * LOOP AT i_list.
> ** select single vbeln into lips-vbeln from lips
> ** where vgbel = i_list-vbeln
> ** and vgpos = i_list-posnr.
> **
> ** select single wadat_ist into i_list-wadat_ist from
> likp
> ** where vbeln = lips-vbeln.
> *
> * SELECT b~wadat_ist INTO i_list-wadat_ist
> * FROM lips AS a INNER JOIN
> * likp AS b ON a~vbeln = b~vbeln WHERE a~vgbel =
> i_list-vbeln
> * AND a~vgpos = i_list-posnr.
> * MODIFY i_list.
> * CLEAR: i_list, lips-vbeln.
> * ENDSELECT.
> * ENDLOOP.
>
> * CH01 - Changed to select multiple delivery lines &
> del qty
> * summing the total deliveries per OBD# and date
> LOOP AT i_list.
> SELECT avbeln sum( alfimg ) b~wadat_ist
> INTO (i_list-obd , i_list-lfimg , i_list-wadat_ist)
> FROM lips AS a INNER JOIN
> likp AS b ON avbeln = bvbeln WHERE a~vgbel =
> i_list-vbeln
> AND a~vgpos = i_list-posnr
> AND a~pstyv = i_list-pstyv
> group by avbeln bwadat_ist.
> i_list2 = i_list.
> APPEND i_list2.
> ENDSELECT.
> IF sy-subrc <> 0.
> i_list2 = i_list.
> APPEND i_list2.
> ENDIF.
> ENDLOOP.
> i_list[] = i_list2[].
> *End CH01
>
> COMMIT WORK AND WAIT.
>
> LOOP AT i_list.
> IF i_list-wadat_ist IS INITIAL.
> CONTINUE.
> ELSE.
> i_list-days = i_list-wadat_ist - i_list-erdat.
> ENDIF.
> MODIFY i_list.
> CLEAR: i_list.
> COMMIT WORK AND WAIT.
> ENDLOOP.
>
> COMMIT WORK AND WAIT.
>
> LOOP AT i_list.
> IF i_list-vbeln IS INITIAL.
> DELETE i_list.
> ENDIF.
> ENDLOOP.
> COMMIT WORK AND WAIT.
>
> *JR
> LOOP AT i_list.
> SELECT SINGLE KUNNR INTO i_list-shipto FROM vbpa
> WHERE vbeln = i_list-vbeln
> AND parvw = 'WE'.
> MODIFY i_list.
> ENDLOOP.
> *END JR
>
> gt_outtab[] = i_list[].
> COMMIT WORK AND WAIT.
>
>
> ENDFORM.
>
> *----
> -
> * FORM alv *
> *----
> -
> * ........ *
> *----
> -
> FORM alv.
>
> PERFORM e03_eventtab_build USING gt_events[]. "+EC1
> PERFORM e04_comment_build USING
> gt_list_top_of_page[]. "+EC1
> prognm = sy-repid. "+EC1
>
>
> CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
> EXPORTING
> i_callback_user_command = 'USER_COMMAND'
> i_callback_program = g_repid
> it_fieldcat = gt_fieldcat[]
> it_events = gt_events[] "+ESC
> it_sort = it_sort[]
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> is_variant = g_variant
> i_save = g_save
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
> TABLES
> t_outtab = gt_outtab.
>
> COMMIT WORK AND WAIT.
>
>
> ENDFORM.
>
>
> *----
> -
> * FORM fieldcat_init *
> *----
> -
> * ........ *
> *----
> -
> * --> I_FIELDCAT *
> *----
> -
> FORM fieldcat_init
> USING i_fieldcat TYPE slis_t_fieldcat_alv.
> DATA: ls_fieldcat TYPE slis_fieldcat_alv.
> DATA: pos TYPE i VALUE 1.
> CLEAR ls_fieldcat.
Please note to keep on incrementing pos variable for column position.
 pos = pos + 1.
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'VBELN'.
> ls_fieldcat-ref_tabname = 'VBAK'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
 pos = pos + 1. ===> after every append to field catalog.
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'POSNR'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'ETERN'.
> ls_fieldcat-ref_tabname = 'VBEP'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'MATNR'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'MVGR1'.
> ls_fieldcat-ref_tabname = 'MVKE'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'WERKS'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> * ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'LGORT'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> * ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'ERDAT'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> * ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'WADAT_IST'.
> ls_fieldcat-ref_tabname = 'LIKP'.
> * ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'DAYS'.
> ls_fieldcat-ref_fieldname = 'DAYS'.
> ls_fieldcat-seltext_s = '# Of Days'.
> ls_fieldcat-seltext_m = '# Of Days'.
> ls_fieldcat-seltext_l = '# Of Days'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> *Begin CH01
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'KWMENG'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> ls_fieldcat-outputlen = 7.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'LFIMG'.
> ls_fieldcat-ref_tabname = 'LIPS'.
> ls_fieldcat-outputlen = 7.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'OBD'.
> ls_fieldcat-seltext_s = 'OBD'.
> ls_fieldcat-seltext_m = 'Outbound Del'.
> ls_fieldcat-seltext_l = 'Outbound Delivery'.
> ls_fieldcat-outputlen = 10.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> * ls_fieldcat-col_pos = pos.
> * ls_fieldcat-fieldname = 'OBD_POS'.
> * ls_fieldcat-seltext_s = 'OBD Ln'.
> * ls_fieldcat-seltext_m = 'Outbound Del Ln'.
> * ls_fieldcat-seltext_l = 'Outbound Del Line'.
> * ls_fieldcat-outputlen = 10.
> * APPEND ls_fieldcat TO i_fieldcat.
> * CLEAR ls_fieldcat.
> *
> *End CH01
>
> *JR
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'SOLDTO'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> ls_fieldcat-seltext_m = 'Sold To'.
> ls_fieldcat-seltext_l = 'Sold To'.
> ls_fieldcat-outputlen = 10.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'SHIPTO'.
> ls_fieldcat-ref_tabname = 'VBPA'.
> ls_fieldcat-seltext_m = 'Ship To'.
> ls_fieldcat-seltext_l = 'Ship To'.
> ls_fieldcat-outputlen = 10.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
> *END JR
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'EDATU'.
> ls_fieldcat-ref_tabname = 'VBEP'.
> ls_fieldcat-seltext_m = 'Requested Delivery date'.
> ls_fieldcat-seltext_l = 'Requested Delivery date'.
> ls_fieldcat-outputlen = 20.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> *FOR ALV SORT & SUBTOTAL
> CLEAR it_sort.
> it_sort-spos = '0'.
> it_sort-fieldname = 'VBELN'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
>
> CLEAR it_sort.
> it_sort-spos = '1'.
> it_sort-fieldname = 'POSNR'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> it_sort-subtot = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
> *
> CLEAR it_sort.
> it_sort-spos = '2'.
> it_sort-fieldname = 'MATNR'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
>
> CLEAR it_sort.
> it_sort-spos = '3'.
> it_sort-fieldname = 'MVGR1'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
> *
> CLEAR it_sort.
> it_sort-spos = '4'.
> it_sort-fieldname = 'ERDAT'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
>
>
> CLEAR it_sort.
> it_sort-spos = '5'.
> it_sort-fieldname = 'WADAT_IST'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-down = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
>
> *
> * CLEAR it_sort.
> * it_sort-spos = '6'.
> * it_sort-fieldname = 'PERNR'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> *
> * CLEAR it_sort.
> * it_sort-spos = '7'.
> * it_sort-fieldname = 'VORNA'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '8'.
> * it_sort-fieldname = 'NACHN'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '9'.
> * it_sort-fieldname = 'VKGRP'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '10'.
> * it_sort-fieldname = 'VBELN'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '11'.
> * it_sort-fieldname = 'ERDAT'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '12'.
> * it_sort-fieldname = 'BEZEI'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
>
> * clear it_sort.
> * it_sort-spos = '1'.
> * it_sort-fieldname = 'BELNR'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> * append it_sort.
>
>
> ENDFORM.
>
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> *&----
> -
> *& Form VARIANT_INIT
> *&----
> -
> * text
> *----
> -
> * --> p1 text
> * <-- p2 text
> *----
> -
> FORM variant_init.
> *
> CLEAR g_variant.
> g_variant-report = g_repid.
> ENDFORM. " VARIANT_INIT
>
>
>
> *----
> -
> * FORM f4_for_variant *
> *----
> -
> * ........ *
> *----
> -
> FORM f4_for_variant.
> *
> CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
> EXPORTING
> is_variant = g_variant
> i_save = g_save
> * it_default_fieldcat =
> IMPORTING
> e_exit = g_exit
> es_variant = gx_variant
> EXCEPTIONS
> not_found = 2.
> IF sy-subrc = 2.
> MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
> WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
> ELSE.
> IF g_exit = space.
> p_vari = gx_variant-variant.
> ENDIF.
> ENDIF.
> ENDFORM.
> *&----
> -
> *& Form PAI_OF_SELECTION_SCREEN
> *&----
> -
> * text
> *----
> -
> FORM pai_of_selection_screen.
> *
> IF NOT p_vari IS INITIAL.
> MOVE g_variant TO gx_variant.
> MOVE p_vari TO gx_variant-variant.
> CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
> EXPORTING
> i_save = g_save
> CHANGING
> cs_variant = gx_variant.
> g_variant = gx_variant.
> ELSE.
> PERFORM variant_init.
> ENDIF.
> ENDFORM. " PAI_OF_SELECTION_SCREEN
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
>
>
> *----
> -
> * FORM e03_eventtab_build *
> *----
> -
> * ........ *
> *----
> -
> * --> E03_LT_EVENTS *
> *----
> -
> FORM e03_eventtab_build USING e03_lt_events TYPE
> slis_t_event.
> DATA: ls_event TYPE slis_alv_event.
>
> CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
> EXPORTING
> i_list_type = 0
> IMPORTING
> et_events = e03_lt_events.
> READ TABLE e03_lt_events WITH KEY name =
> slis_ev_top_of_page
> INTO ls_event.
> IF sy-subrc = 0.
> MOVE gc_formname_top_of_page TO ls_event-form.
> APPEND ls_event TO e03_lt_events.
> ENDIF.
> ENDFORM.
>
> *----
> -
> * FORM e04_comment_build *
> *----
> -
> * ........ *
> *----
> -
> * --> E04_LT_TOP_OF_PAGE *
> *----
> -
> FORM e04_comment_build USING e04_lt_top_of_page TYPE
> slis_t_listheader.
> DATA: ls_line TYPE slis_listheader.
>
> *Report Title
> CLEAR ls_line.
> ls_line-typ = 'H'.
> ls_line-info = text-007.
> APPEND ls_line TO e04_lt_top_of_page.
> *
> *
> **Doc Type Desc.
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-008.
> ** ls_line-info = p_matnr.
> * append ls_line to e04_lt_top_of_page.
> *
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-009.
> ** ls_line-info = p_werks.
> * append ls_line to e04_lt_top_of_page.
> *
> *
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-010.
> ** ls_line-info = p_stlan.
> * append ls_line to e04_lt_top_of_page.
> *
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-011.
> ** ls_line-info = p_stlal.
> * append ls_line to e04_lt_top_of_page.
> *
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-012.
> ** ls_line-info = p_stlal.
> * append ls_line to e04_lt_top_of_page.
>
>
>
> ENDFORM.
>
> *----
> -
> * FORM top_of_page *
> *----
> -
> * ........ *
> *----
> -
> FORM top_of_page.
>
> CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
> EXPORTING
> it_list_commentary = gt_list_top_of_page.
>
>
> ENDFORM.
>
> *----
> -
> * FORM auth_check *
> *----
> -
> * ........ *
> *----
> -
> FORM auth_check.
>
> AUTHORITY-CHECK OBJECT 'V_VBAK_VKO'
> ID 'VKORG' FIELD p_vkorg.
> IF sy-subrc NE 0.
> MESSAGE e054 WITH p_vkorg.
> ENDIF.
>
>
> ENDFORM. " auth_check
>
>
> *&----
> -
> *& Form USER_COMMAND
> *&----
> -
> FORM user_command USING r_ucomm LIKE sy-ucomm
> rs_selfield TYPE slis_selfield.
>
> CASE r_ucomm.
> WHEN '&IC1'.
> PERFORM display_so_order USING r_ucomm
> rs_selfield.
>
> ENDCASE.
>
> ENDFORM.
>
> *&----
> -
> *& Form display_sales_order
> *&----
> -
> * text
> *----
> -
> * -->P_R_UCOMM text
> * -->P_RS_SELFIELD text
> *----
> -
> FORM display_so_order USING r_ucomm LIKE sy-ucomm
> rs_selfield TYPE slis_selfield.
>
> CASE rs_selfield-sel_tab_field.
> WHEN '1-VBELN'.
> SET PARAMETER ID 'AUN' FIELD rs_selfield-value.
> CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
> WHEN '1-MATNR'.
> SET PARAMETER ID 'MAT' FIELD rs_selfield-value.
> CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
> WHEN '1-OBD'.
> SET PARAMETER ID 'VL' FIELD rs_selfield-value.
> CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN.
> WHEN OTHERS.
> MESSAGE i000(z1) WITH 'Please Click on the Valid
> Selection'.
> EXIT.
> ENDCASE.
>
>
> ENDFORM. " display_sales_order
>
> *----
> -
> * FORM EDit_table *
> *----
> -
> * ........ *
> *----
> -
Message was edited by: Anurag Bankley

Please put a cost object with valid JV data for GL accoutnt (line 001)

Dear All,
When the user is trying to post ASKBN, They are getting an error saying "Please put a cost object with valid JV data for GL accoutnt (line 001)"
So we tried to look up the error, and the WBS, Cost center, profit center and JVA details are all available in place. Still cant understand why this error comes. And why the system is asking to put JV details when they are available.
On checking, WBS has an AUC and AUC has the cost center which has the JV details and PC details. So I think everything is in place.
Can someone help please and let us know if we are missing anything else that needs to be checked ?
Thanks,
Hari Dharen

Dear Hari Dharen,
if something else in missung you'll get a error message if you run ASKBN in testmodus.
regards Bernhard
Edited by: Bernhard Kirchner on Oct 5, 2010 8:55 AM

Retrieving the milestone dates for an opportunity line item

Good afternoon experts,
I am looking for a way to retrieve the milestone dates for an opportunity line item. I have the line item GUID and need to find out the milestone dates for the item.
Is there a table or FM that will allow me to do this?
Thanks,
Eric

Hi Eric,
I think you can use the FM 'CRM_ORDER_READ'. Pass the guid of the transaction as input to the FM , milestones details you will get from the parameter 'ET_APPOINTMENT'.
Hope this helps.
Regards,
Ruby.

How to Check Creation/Change data for PO Service Line item

Hi, I was wondering what field(s) from what table(s) I would have to check if I wanted a report to look for the creation or chnaged date of a specific service item in a PO?
Currently it is using the EKPO-AEDAT field to check if a PO line item has been changed, but I would like to narrow it down to just some service line items instead of capturing all the service lines in a recently changed PO line item.
Thank you very much in advance for the advice!

Hi Rashid, thanks for the advice, but it doesn't really solve my problem.
What I want to know is if there is a field where the date of a service item was created in a PO line item is stored, so that an ABAP report can be written to retrieve newly created service items from POs.

HOW TO MIGRATE DUNNING LEVEL & LAST DUNNED DATE FOR ALL OPEN LINE ITEMS

Hi,
We need to upload dunning level & last dunned date for all open items (to be done separately i.e. after all open items migrated) which is different for each and every line item so if we use mass upload (fbl5n) we have to do for each and every open line item which is not feasible as open line items in thousands..I tried LSMW also,problem is that for Batch input recording we need to run one complete cycle in sm30 but there is no maintenance dialog for BSEG & BSID table.. Please share your valuable Inputs how we can go ahead..
Thanks in advance

Hi Mark,
Thanks for your reply.
It is complete a Zcopy of a standard one, but we are facing one or two records are not updating correctly out of hundreds of customers in the worklist.

One MIRO document with two different vendors for two different line items

Can it possible to make MIRO for a PO which is having two conditions(Basic price+Freight) with two different vendors.
MIRO document needs:
GR/IR Clearing    Dr.
Freight Clearing Dr.
Vendor RM(X)         Cr.
Vendor Freight(Y)   Cr.
Is it possible to post the above document at a time not individually for each condition.

Hi,
Yes, It is possible to post Material and delivery cost in one document.where in material supplier is different than the Frieght vendor.
Itm PK BusA Acct no.   Description                    Tx     Amount in   USD
001 89       130001     Stock-Ingredients               244 0            880.00
002 96       320001     GR/IR Account - Ing.            244 0          1,200.00-
003 86       520002     Ingredients - PPV               244 0          3,297.87
004 50       320008     GR/IR Account - Duty            244 0            797.87-
005 50       320009     GR/IR Account - Fre.            244 0          2,180.00-
Thanks
Dinabandhu

Delivery schedules with outline purchase agreement

Can somebody tell me how to automatically result delivery schedules with outline purchase agreement through MRP running？

Priyanka.P thanks for your reply.
The following is how I process:
1.I use auto po indicator at VMR
2. I tick Auto PO indicator and source list indicator at MMR
3.I have made schedule agreement(type LP) and assign it in source list as fix vendor(1000) and with the MRP indicator 2(Record relevant to MRP Sched. lines generated automatically)with the proper validity periods in IDES.
4. In MD03, I use the create schedule as 3
5.There is Dependent reqmt.
When I finish my MRP running I find a Purch.Req with Exception 30( Plan process according to schedule (08.11.07/08.11.06)) generated. however I hope a vendor Delivery schedule.

Delivery doc creation for a selected line item of the Sales order

Hi folks,
Can any one help me in how to create a delivery order for a selected line item of the Sales order.My requirement is the request comes from the web browser where a sales document and details of the items are shown the user select one line item and request for delivery create of that particular SO doc.I have used couple of FM to create delivery but the delivery create is depend on the schedule line dates so iam unable to figure out where exactly i can distinguish between the line items.
Example:
SO:- 11193645
Line item -1 has 2 schedule line 06/11
06/13
Line iteam-2 has 1 schedule line 06/12
so if i try to create Delivery doc for date 06/12
it creates partially for line 1 and line 2.
but my requirement is i wanted to create SO for only line item 1 as i wanted to process Del Doc for only line item 1.
If you have any idea please help me.

hi ,
You can develop a customised FM to process the Idoc data .
1. Read the Idoc data into internal table for the line items which need to be delivered .
2. Run BDC for transaction 'VL01N' ( delivery creation ) through which eliminate the line items which are not in internal table and save the delivery document
Note : Because in VL01N , you specify the sales document with respect to which you want to perform delivery hence automatically all items are copied to the delivery document .
During BDC recording , select items by " MOVING TO TOP"
and then deleting the selected item
If you face problem in BDC recording , i can help u that too .

PO delivery schedule "Statistics-relevant delivery"

Hi,
Please suggest PO item level delivery schedule tab- "Statistics-delivery date" how it get influence in PO and specific funtion for this. if we are changing delivery date and not changing this after Printout any where will cause problem.
JACK

Hi
The system uses the statistics-relevant delivery date in the purchase order and the goods receipt date to calculate date variances.
You use the statistics-relevant delivery date, for example, if you know that the vendor will not deliver the material as scheduled on September 15 but on September 30. Enter the delivery date as September 30, but enter the statistics-relevant delivery date as September 15.
In calculating the score for on-time delivery performance, the system will then not use the actual delivery date, but the statistics-relevant delivery date. This has a negative effect on the score for this goods receipt.However, materials planning and control uses the realistic delivery date (September 30) which the vendor will actually adhere to.
Regards

Some of the data for same records is going on to the next page in excel??

Hello,
I designed a template in word with page setup orientation to Landscape, to get the Excel report output. Later when i preview the same in Excel with the Landscape page setup..the print preview is showing me with some of the data going out of the page set up.My font size for data in word I put is 8pt Times New Roman.
Basically..my requirement is to print the report in excel with the landscape page setup.
But some of the data for same records is going on to the next page in excel??
How do i prevent this from happening?
Thanks in Advance!

Hello
The blog suggested above is to set the output for a PDF document using RTF template. Whereas, my requirement is to get a excel output using RTF template, with data fitting directly with in the landscape orientation of EXCEL when printed.
Basically, the requirement is : When i run the report, the excel output should be sent to a printer with style 'Landscape' from apps?? But the problem is that i am not getting all the pagebreaks i put in the RTF template and also some of the data for the same records is not fitting in to the landscape orientation of the excel while it gets printed.
But when i run the same as a PDF everything is fine... ..But that's not my requirement...Please help!
Thanks,

Delivery Schedule Number or Delivery Plan Number field

Hi,
In MM which field refers to Delivery Schedule number (or Delivery Plan number)
Advance Thanks
Aadarsh

Hi Sanjeev,
Sorry. That is not the one. ETENR is of NUMC 4. But the field I am seeing is atleat 8 characters (maybe 10).
I dont have any further information than the name given :
Delivery Schedule Number or Delivery Plan Number field.
I can further say to you that this is being used in Vendor Decleration
Regards
Aadarsh

How to get XLR to show BPs with no transaction data for a given date range

Hi -
I am building an XLR report that does a comparison of net sales data across two periods for a given sales employee's BPs.
The report has the row expansion:
FACT BPA(*) SLP(SlpName = "ASalesPersonNameHere") ARDT(Code = "ARCreditMemo", "Invoice") Group by BPA.CardName
and column expansions:
FIG(SO_TaxDate = @StartDate:@EndDate)
and
FIG(SO_TaxDate = @StartDate2:@EndDate2)
where @StartDate, @EndDate, @StartDate2, @EndDate2 are parameters that define the two ranges of dates.
The column formulas are, from left to right:
=ixDimGet("BPA", "CardName")
=ixGet("SO_DocTotal") <-- filtered by column expansion for first date range
=ixGet("SO_DocTotal") <-- filtered by column expansion for second date range
The report works fine except for one problem, I would like it to include BPs for which no transaction occurred in either date range as well.
Any help is greatly appreciated!
Thanks,
Lang Riley

Really appreciate your feedback! Those are good suggestions. I should have mentioned that I had already tried both those suggestions.
Removing FACT on BPA in this case ends up returning all the BPs and not respecting the SLP(SlpName = "aName") part of the query.
Using **, i.e., * or #NULL, makes no change in the resulting data in this case. I had thought that ** would be the solution, but it didn't change the outcome. I still have BPs for which when their sales employee is used as the filter and they have no transactions for either date range, and yet they still do not appear.
I should further mention that the IXL query, as it now stands, does return BPs for which one of the periods has no data, just not both, and I have verified that applicable BPs with no transaction data for both periods do exist in my data set. It seems that perhaps the IXL query needs to be restructured? Please keep the suggestions coming including how this query might be restructured if necessary.

Three same material document number generated for single PO line item.

Hi,
I found three same material number has been generated for single PO line item. Is there any specific reason for this.
Here is the detail.
PO
LN   qty
10    100
PO history for LN 10
Mat doc          qty               price
5000000000     100               100
5000000000     100               100
5000000000     100               100

see aditya , tables having document number as a primairy key will have a single entry , where as tables having primary key other then material documnet number is having multiple entries . as far as material document is concern , it is only one document in system , now we have to find why it is appearing 3 times . i will test this in my system and let you know .
well thanx for your Cooperation . i will definatly get back to you .
regards
ravikant dewangan

What is table name in SAP R/3 for PM order line item data

Hello,
I am extracting data for PM module and Interested in PM order line item data. Table AUFK is for PM order header master data.
Is there any other table for PM order line item master data?
Thanks,
Ishak

Hi Ishak,
The item table is AUFP.
Thanks.

Multiple delivery schedule (with same delivery date) for same PO line item

Similar Messages

Maybe you are looking for