Multiple Dependent and Independent Samples

Hi,
Can anybody explain about Multiple Dependent Samples and Multiple Independent Samples with proper Examples?
Regards,
Raj

dear Raj
Multiple Dependant Samples,
Suppose you have sampling scheme in which the lot size is 10, sample size is 5. acceptance number is 1 and rejection number 4.
Now during RR you found that 2 values are ok and 3 values are not ok. So the system is in confusion because it requires 4 to reject. So system proposes you another sampling plan by which you can further do testing and record the results. The defects get cumulated and is then valuated. you can do this 7 times. For this you need to maintain c1,d1,c2,d2 ,c3,d3 for the same sample size
Hope this helps
Regards
gajesh

Similar Messages

Activity Dependant and Independant Cost in real time scenarios

Hi SAP Gurus,
I know what is activity Dependant and independant costs. But i would like to know in the realtime scenario what are the costs that would be treated as activity dependant costs and how thay will be handled.
You answer would be suitably rewarded with points
Thanks in advnace

Hi
In real time based on client practices, the cost/activity plan will be based on activity dependant cost.
ex: There is Quality control department and it carries out testing of the products.
now, to get plan/budgeted cost/activity, we can choose the requied cost elements to be planned for the period.
like:
the cost elements are
QC cost elements
Salararies & Benefits
Indirect Materials
Indirect Expeneses
and fixed expenses
for above cost elements we do cost/activity dependant plan and calculate the cost per i hour of testing based on parameters.
Regards
Laxmiprasad

Differentiating Between Dependent and Independent Data

HI,
How can I make a differentiation between dependent and independent data?

HI,
If you double click a Transfer requirement in SE10 or SE09 and then press F4 in the field category, you will find some helpful information.
Client dependent or independent transfer requirements include client specific or cross client objects in the change requests. Workbench objects like SAPscripts are client specific, some entries in customizing are client independent.
If you display the object list for one change request, and then for each object the object attributes, you will find the flag client specific.
If one object in the task list has this flag on, then that transport will be client dependent.
You can also find a list of the high class objects in SAP, here you will see the flag on/off. Use TCODE SOBJ.
Start STMS and double click on the request itself, you will see which type of request it is (Workbench -> client independent or Customizing -> client dependent).
I recommend you to import every request on each client without looking inside the request.
Reward Points if found helpfull..
Cheers,
Chandra Sekhar.

List of client dependant and independent

Hi All,
Can any one let me knw the list of objects which are client dependent and which are not.
Thanks,
Vibha

Hello Vibha
The following list shows the client-dependent repository objects:
LIMU     FSEL     Field Selection
LIMU     VARI     Report Program System Variant
R3TR     COC1     CO: Cost Centers
R3TR     COC2     CO: Activity Types
R3TR     FORM     SAPscript form
R3TR     LODS     HRDSYS: Logical information object client-dep. table E SYST
R3TR     PCYS     HR: Transport standard personnel calculation rules
R3TR     PHDS     HRDSYS: physical information object client-dep. table E SYST
R3TR     SBNL     Logical Information Object for BDS
R3TR     SBNP     Logical Information Object for BDS
R3TR     SBNR     BDS: Relationship Between Information Objects
R3TR     SBPL     Logical Information Object for BDS: Bid Invitation
R3TR     SBPP     Physical Information Object for BDS
R3TR     SBPR     BDS: Relationship Between Information Objects
R3TR     SBRL     Logical Information Object for BDS
R3TR     SBRP     Physical Information Object
R3TR     SBRR     BDS: Relationship Between Information Objects
R3TR     SBSL     Logical Information Object for BDS
R3TR     SBSP     Physical Information Object
R3TR     SBSR     BDS: Relationship Between Information Objects
R3TR     SBTL     Logical Information Object for BDS
R3TR     SBTP     Physical Information Object
R3TR     SBTR     BDS: Relationship Between Information Objects
R3TR     SBWL     Logical information object for BDS
R3TR     SBWP     Logical information object for BDS
R3TR     SBWR     BDS: Relationship between information objects
R3TR     SRHL     SRM: Hierarchical Lists
R3TR     SRLD     Language-Dependent Client-Specific Retrieval Index Objekt
R3TR     STYL     SAPscript Style
In contrast to client-independent repository objects which can be imported into any client these objects must be transported into their specific target client.
Regards
Uwe

Planning dependent and independent requirements in DP

Hi,
We have a material A here that has a BOM defined. The components of the BOM are all dependent on the initial material. There are some cases where theBOM is recursive, meaning that the components of BOM could include material A. Now, I also have some more components that are infact independent of this material but are necessary for material A but it's dynamic. How do I plan this scenario in DP?
I think DP-BOM does the dependent requirements planning for the material A.
How do I plan for the dynamic components? I have some history on how they are generally consumed. So, should I plan them separately, I mean the material A along with the dependent components and the independent dynamic no. components? But the problem, I am guessing, comes up when we forecast more of the independent components and plan fewer for this month....Can somebody suggest me something?
I think I am correct in going for DP-BOM instead of CBF as I donot have variants involved here. Please correct me if I am wrong, we use DP-BOM when we need to plan on simple BOMs (no variants, multiple BOMs etc.) and use CBF in case we need to deal with variants involving characteristics.
Any suggestions are highly appreciated.
Thanks.
Message was edited by:
Visu Venkat

the realignment will depend on the realignment table. So if you devise a way to keep that as dynamic as your changes in the components you should be able to do that
there are quite a few ways you can achieve your means... the realignment thought occured because i was posting another answer on it
am sure there will be other issues we havent foreseen that might arise when you actually try it
here is another alternate you might want to try.... just some more vague thought....
if you are on SCM 5 (if you are on another version there are other ways of doing this)
1. create CV Cs based on a worklist that lists the dynamic components ... (you can automate this if you want - as long as there is a reference spreadsheet)
2. Create a selection profile that has the Main component and the dynamic components (lets assume there are 3 components and this will be a 1:1 ratio with the main productA)... now the total of the forecast for this selection profile will be say 100
2. Run a macro that will multiply the forecast with the number of products in it (so 100*4) . this will make the forecast 400
3. If you have set a disaggregation on the forecast KF that is equal distribution (this may not be the case in your business scenario) you will get 100 on each of the selections
am sure there are a lot of holes in this that can be plugged or variations worked on... depends what works easier for you...and the amount of maintainance and data involved ... it will all boil down to the business process

Dependent and Independent Requirements

Hi Gurus,
Please tell the table and field name for Dependent & Independent requirements.
Regards,
Senthil.K

Hi,
Thanks
I fouond the logic for Independent requirements.But I can't get the Dependent Requirements.In Table PKSL very less fields only available.Please give the logic.
Regards,
Senthil.

Instance dependant and independent

Hello
I cannot access the method getDetail() in Purchase order BAPI. It shows an error [" GetDetail on type _Com Object not found "].But I can access the method getItems() in the same BAPI (Both are tried from VS .NET 2003 ). In SAP GUI I noticed that getDetail() is instance dependendnt and getItems() is instance independent . Is this the reason for showing the error ? Can any one of you tell me the difference between Instance dependant BAPI method and Instance independent BAPI method. and how i can solve this issue
Thanks in advance

Hello
I cannot access the method getDetail() in Purchase order BAPI. It shows an error [" GetDetail on type _Com Object not found "].But I can access the method getItems() in the same BAPI (Both are tried from VS .NET 2003 ). In SAP GUI I noticed that getDetail() is instance dependendnt and getItems() is instance independent . Is this the reason for showing the error ? Can any one of you tell me the difference between Instance dependant BAPI method and Instance independent BAPI method. and how i can solve this issue
Thanks in advance

Hi abapers doubt in client dependent and independent

i am having a doubt could you please explain me
i created a dependent table using mandt in client 100(development).
if transfered this table to quality 110(quality). it is possible access data?
when i see development 100 it's having data but i can't find any records in quality it's not showing the records.
how we can see data in quality110 , if table is dependent.

Hi Sayeed,
Data in the table will only we transported accross a system landscape if you have marked the recording routine in your development system.
Regards,
John.

Urgent:Why Script is cliend dependant and smartform is not client dependant

Hi all,
Can any one pls tell me why script is client dependent and smartform is not client dependant.
<b>Please give some real time examples in brief</b>
regards
tapu

Hi
DIFFERENCE BETWEEN SMARTFORMS AND SAPSCRIPTS ARE:
1. script is client dependent one while smartform is client independent.
2. In scripts we have to write print program while in smart forms it is not necessary.
3. In scripts we can print background logo while in smartforms we cant print background logo
4. In scripts we have 99 main windows while in smartforms we have only 1 main window.
5. In scripts we should write paragraph format otherwise we cant execute program while in smartforms no need to create paragraph formats .
6. In scripts we can print the text in only two character formats.
while in smartforms we can do with more.
7. In scripts we dont have line types while in smartforms we have linetypes.
8.Multiple page formats are possible in smartforms which is not the case in SAPScripts
9.It is possible to have a smartform without a main window .
10.Labels cannot be created in smartforms.
11.Routines can be written in smartforms tool.
12.Smartforms generates a function module when activated.
SAPscript technology is based on a mainframe product from the 1980s, while Smart Forms have only been around since (roughly) 2001. With that sort of time gap, there are bound to be significant differences between the two tools. Client dependence is a fundamental one. Although SAPscript has had some incremental improvements over time, its forms have always been -- under the hood -- relatively ...
also refer
difference between smartforms and scripts
Diff betwen Scripts & smartforms
advantages of smartforms over scripts
Whenever a smartform is created, a funciton module gets generated. So, we can access the smartform in different clients. But in case of scripts, it is not so.. So, scripts are client dependent.
Smart Forms are implemented using the Function Module SSF*, and all the logic lies in the FM. Function Modules are client independent objects, so Smart forms are also client independent
SAP Scripts are the Layout Forms that you design and there are aviable in the client in which you have created them, for making them available you have to copy across the clients.
Because, Sapscripts are saved in ITF format as text in client dependant tables STXH and STXL. smartforms are not saved in client dependant tables and visible across clients.
SAPscript technology is based on a mainframe product from the 1980s, while Smart Forms have only been around since (roughly) 2001. With that sort of time gap, there are bound to be significant differences between the two tools. As you have noted correctly, client dependence is a fundamental one.
Although SAPscript has had some incremental improvements over time, its forms have always been -- under the hood -- relatively passive objects, with minimal embedded logic. These forms were designed to be driven and controlled by ABAP programs, much in the way ABAP programs read in database tables to produce reports; if you ever download a SAPscript form (e.g., via utility program RSTXSCRP), and look at the portable text file it produces you'll see what I mean. Many text objects (e.g., invoice header texts) are bound directly to documents which are client-dependent, so it makes sense for these text objects to also be client-dependent. From a complexity standpoint, SAPscript forms are close enough to these text objects where I can see how it made sense at the time to make them client-dependent too.
Conversely, a Smart Form is significantly more robust and complex. For instance, it can contain program nodes and nested tables with patterns. When a Smart Form is compiled, it generates an ABAP function module and these are always client-independent. This is appropriate, given that this form has more in common with an ABAP program than its predecessor. For instance, when a print program calls a Smart Form, the form itself takes over to produce output, without any further direction from the print program. In fact, the join is so seamless that I often find myself using a Smart Form's Initialization section for logic to handle any data gathering not handled by the print program. I would never even think to attempt this with SAPscript.
I suspect several factors figured into SAP's decision to make Smart Forms client-independent, including customer feedback. There are significant advantages to client-independence. For instance, a change made in one development client happens immediately across all development clients. Among other things, this means we don't have to waste time figuring which client contains the most recent version -- they all do! In addition, transporting Smart Forms is easier, since we can safely bundle them together in the same transport as their client-independent print programs (no worry about mixing client-dependent and independent objects).
<b>Reward points for useful Answers</b>
Regards
Anji

Client dependent and client independent in ALE

I am going through pdf learning of an ALE scenario,i couldnot get wat is meant by client Independent and client dependent.
How can i conclude
Create message type (WE81){color:green} Client independent {color}
To create a new message type, follow these next few steps:
u2022 Enter transaction WE81 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> Create logical message type)
u2022 Choose Create logical message type by double clicking on it
u2022 Click on change icon to enter change mode
u2022 Click on New entries to add a new type
u2022 Enter the required message type, in our case it is ZINVRV and an appropriate description
u2022 Save and exit.
Your message type has now been created. The next step will be to link it to the IDoc.
2.2.1. Link message to IDoc type (WE82 & BD69) {color:green} Client independent {color}
To link the message type to the IDoc type follow these next few steps:
u2022 Enter transaction WE82 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> EDI: Message Types and Assignment to IDoc Types)
u2022 Click on change icon to enter change mode
u2022 Click on New entries to create the link
u2022 Enter the message type ZINVRV and the BasicIDoc type as ZINVRV01
u2022 Save and exit
u2022 Enter transaction BD69 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> Assign message type to IDoc for ALE)
u2022 Click on change icon to enter change mode
u2022 Click on New entries to create the link
u2022 Enter the message type ZINVRV and the BasicIDoc type as ZINVRV01
u2022 Save and exit
Your IDoc is now linked to your message type. We still need to link object types and add the message to the model before we can use the message.
2.2.2. Maintain object type for message type (BD59) Client independent
The ALE objects are used to create links between IDocs and applications objects, to control the serialisation, to filter messages in the customer model and to use listings.
For our own message type and IDoc you must maintain object types for the links.
If you want to check the serialisation for the message type, then you must maintain object types for the serialisation. If no serialisation object has been maintained for a given message type, then the serialisation will not be checked for this message type.
To add an object type to our message type, follow these next few steps:
u2022 Enter transaction BD59 (ALE -> Extensions -> ALE object maintenance -> Maintain object types)
DOC NAME: ALE_SCENARIO_DEVELOPMENT_PROCEDURE
Version 1 Page 6 of 16
ALE Scenario Development Guide
u2022 Type in your message type ZINVRV and press enter
u2022 Click on New entries
u2022 Enter your object type, LIFNR (We need to use the vendor as a filter object), the segment name where LIFNR resides, Z1INVRV, a number 1 for the sequence followed by the actual field name LIFNR
u2022 Save and exit.
You have now created an object that weu2019ll use as a filter object in the customer model to direct the flow of messages to the various logical systems based on the vendors in the filter of the message type ZINVRV.
We now need to add our new message type to the distribution model.
2.3. Configuring the Distribution Model
This task is performed on your ALE reference client.
2.3.1. Manual Configuration (BD64) {color:green} Client dependent {color}
To manually configure the customer distribution model, read the ALE configuration procedure, and follow these steps:
u2022 Perform the Maintain customer distribution model directly function. (ALE -> Distribution customer model -> Maintain customer distribution model directly)
u2022 Specify the customer model you want to maintain and the logical system that is to be the sender of the messages OR create a new model. (Create model ALE with logical system ALELS1C400)
u2022 Choose the receiving systems to which the sending system must forward message type ZINVRV to.
u2022 For each receiving logical system allocate the message type necessary for communication to the receiving systems as per ALE configuration procedure.
u2022 Create filter objects (in our case LIFNR as the object type with the associated vendor number, 0000018001 with leading zeros, in the object area) for the message types.
u2022 Save the entries.
Refer my query within color:green
Edited by: aditya sharma on Jul 14, 2010 12:57 PM
Edited by: aditya sharma on Jul 14, 2010 1:01 PM

A client is an independent business unit within an R/3 System, Data in the R/3 are classified as cleint-Dependent and client-independent.
Client-independent data such as ABAP Programs, R/3 repository objects throught the entire system. Other data is client-dependent. meaning, it can be viewed from one client. Cleint-dependent data includes customizing application and user data.
Eg.
Scripts are client dependent, means the changes done to SAP scripts in particular client will not be reflected in other client.
Smartforms are client independent, means changes done in one client will be reflected in all the clients.
Server : ECC6
Client : 100 , 200 , 300 , 400
Now suppose you have developed report in DV server client 100.
Then you will be able to see that in all clients.
Hence this is called as client independent. You can change anywhere and changes will be reflected to all ...
Now suppose you have developed a script in DV client 100.
You will not be able to see that in client 200 or 300 or 400 unless ytou copy that from client since it is client dependent.

Multiple users and shopping carts, one searchable index?

Hi all,
I've got an idea but I would like to know if it possible with Business Catalyst. I'll try and explain as simply as possible:
I have multiple users (let's say 10). They all need separate shopping carts as they are all selling different products. They all need their own admin areas that keep track of their incomes, workflows, shopping carts, etc. They are essentially 10 independent users. Will the WebCommerce10 plan satisfy their needs, or will 10 separate WebCommerce single plans need to be sold?
Taking the above into account, is there anyway to have 10 independent shopping carts, but they can all be searchable simultaneously? e.g. think eBay, lots of users with their own independent admin areas and products, but one search field returning many results from all the user's shopping carts? Is there anyway to achieve something like this with BC? Can subdomains do this? Any other ideas how to achieve this if none of the above is possible?
My plan B is having a landing page where a link for each of the 10 users will take them to their relevant shopping carts, but this experience isn't quite as integrated as I would like, from a web surfer's point of view.
Thanks.
Clint,
Komma Media

Hi Robbie,
Yes, this would require significant modification to the shopping cart functionality. As it is now, it's very dependent the ShoppingCart being associated with the session and therefore the user. To change that would be significant work.
Additionally, if you had two people logging in to the same account and editing the same order around the same time, this would tend to not to work well. This is because two users would be two sessions and they would often get routed to different app server instances. Because the way orders are managed, there's no way to immediately sync up the changes between multiple instances, and if you managed to do it would likely slow things down drastically. I would not recommend trying this with ATG.
Thanks.
Nick Glover
Oracle Support for ATG Products

Synchronous acquisition 4 analog signal and independently count TTL impulse

Hello!
I'm have NI DAQ board PXI-6115. I have problem:
Need synchronous acquisition 4 analog signal and independently count TTL impulse. When value counter will, at example, 5000 acquisition must stop. I'm read program in LV 7.1 but have a problem. In HELP write:"You can create only one counter input channel at a time with this VI because a task can contain only one counter input channel. To read from multiple counters simultaneously, use a separate task for each counter". I make two different task, but error not disappear.
I don't know how escape this error?
Program VI with Front panel screen-shot in attach archive.
Message Edited by _Pavel_ on 05-23-2007 09:06 AM
Attachments:
Progr.zip ‏80 KB

Hey Pavel,
Thanks for contacting National Instruments support. Your program, in it's current state, is attempting to generate a finite pule train and count edges on the same card. Finite pulse generation is a two counter device, where one counter generates the pulse train and the other counter gates the generation, or goes high when the generation is to start and low when it is finishes. So no matter which counter you select for the count edges task you will get the error you describe.
Is it possible to use the pulses that you are counting as an external clock? If so then you could just generate 5000 pulses and you would only acquire 5000 samples.
I have attached a modified example from your code.
Let me know what you think. It only acquires 5000 samples as desired.
Regards,
Kenn North
Senior Product Manager - Search, Product Data
http://ni.com/search
Attachments:
Progr.vi ‏58 KB

Multiple rawValues and switch statements - can you do this?

Hi, a simple question (i hope)
first i have to use javascript for his one....
Im just starting a form and it will have about a dozen dropdown lists (over about 15 pages), each with quite a few variables (i feel a headache coming on already...)
and what i would like to be able to do is have text fields at the end of the form (hidden) and insert data into them depending on what combination of choices the user has made in some or all of the dropdown lists.
I know how to get a standard switch statement to work fine but can you (and if so what is the syntax like) do this with multiple lists - and what event would be best to link it to - calculate perhaps?
the switch would be using stored variables and user entered data to produce composite output to the text field (so case: listA.rawvalue = 1 and listB.rawvalue = nine, and listC.rawvalue = cat etc etc [then] this.rawvalue = v1.value + listB.rawvalue etc.....
I'm sure you get the issue im struggling with - I've tried it a few ways but my syntax must be off somewhere
can anyone assist with the syntax for this kind of thing --or a sample would be fantastic.
cheers

Hey Legallogic!
I'm not 100% certain I understand what you are struggling with but I'd be happy to help. If you could provide an alternate explanation of your issue I'll take a look and help you solve it. What I *think* you're asking about is in reference to the test case of a switch statement. Typically a switch would be used to test the value of one particular variable, so:
switch (varTest)
     case "A":
          //Do something here
          break;
     case "B":
          //Do something else here
          break;
     default:
          //Do something cool here instead
          break;
Are you asking how to use a single switch to test the value of multiple variables (or fields)? If so, my recommendation would be to simply use and if/else if/else block as you can craft your test cases however you'd like for those.
Like I said, I may not have understood the issue here so feel free to shoot me an email and I'll take a peek!
Josh Boyle
Cardinal Solutions Group
[email protected]

Multiple desktops and how do I remove them?

How do I even end up with multiple desktops and how do I remove them. All gets very confusing!
Thank you

Swipe up with 4 fingers, or press F3 (or fn+F3 depending on how you have your keyboard configured)
At the top of your screen should be all your desktops simply hover your mouse around the top left area of one of them (apart from the first one) and a X will appear which you can click to close it

Best Practice in maintaining multiple apps and user logins

Hi,
My company is just starting to use APEX, and none of us (the developers) have worked on this before either. It is greatly appreciated if we can get some help here.
We have developed quite a few applications in the same workspace. Now, we are going to setup UAT and PRD environments and also trying to understand what the best practice is to maintain multiple apps and user logins.
Many of you have already worked on APEX environment for sometime, can you please provide some input?
Should we create multiple apps(projects) for one department or should we create one app for one department?
Currently we have created multiple apps for one department, but, we are not sure if a user can login once and be able to access to all the authenticated apps.
Thank you,
LC

LC,
I am not sure how much of this applies to your situation - but I will share what I have done.
I built a single 700+ page application for my department - other areas create separate smaller applications.
The approach I chose is flexible enough to accomdate both.
I built a separate access control application(Control) in its own schema.
We use database authenication fo this app - an oracle account is required.
We prefer to use LDAP for authentication for the user applications.
For users that LDAP is not option - an encrypted password is stored - reset via email.
We use position based security - priviliges are based on job functions.
We have applications, appilcations have roles , roles have access to components(tabs,buttons,unmasked card numbers,etc.)
We have positions that are granted application roles - they inherit access to the role components.
Users have a name, a login, a position, and a site.
We have users on both the East Coast and the West Coast, we use the site in a sys_context
and views to emulate VPD. We also use the role components,sys_contexts and views to mask/unmask
card numbers without rewriting the dependent objects(querys,reports,views,etc.)
The position based security has worked well, when someone moves,
we change the position they are assigned to and they immediately have the privileges they need.
If you are interested I can rpovide more detail.
Bill

Multiple Dependent and Independent Samples

Similar Messages

Maybe you are looking for