Multiple Device Names

Once I upgraded to Yosemite, I noticed in Finder that my device name would change and under the Shared section, there was multiples of my computer. In Devices, it shows COMPUTER (2) and then Macintosh HD. The number changes all the time as well. Under Shared, I see COMPUTER, COMPUTER (2), COMPUTER (3) and COMPUTER (4). There is no way to delete them and I think it's the reason I am having difficult Wi-Fi syncing my iPhone 6 and iPad to iTunes. Can someone offer a suggestion on how to make my computer only have the one name (as it did in Mavericks)? Thanks.......

Experiencing the same thing. Have tried everything to rectify the situation, but my computer name and local addressing keep changing. Be sure to log the bug so Apple can get this fixed: http://www.apple.com/feedback/macosx.html

Similar Messages

We have multiple devices in our family. On each iPad/iPhone each user has their own apple id for iMessage, Facetime and icloud, but we all sign in to the same apple id for itunes. When one of my kids comments on my shared photostream, it shows my name??

We have multiple devices in our family. On each iPad/iPhone each user has their own apple id for iMessage, Facetime and icloud, but we all sign in to the same apple id for itunes. When one of my kids comments on my shared photostream, it shows my name and not theirs as the commenter. How do I fix that?

CREATE A NEW USER
Go to System Preferences --> Create a New User in Users & Groups
Decide on whether to setup as Admin or Standard User.
Switch to the New User by logging out under the Apple in the Menu Bar or use Fast User Switching
Fast User Switching allows other users to leave current applications and windows open. Depending on RAM, you might need to log out rather than use FUS.

Find monitor instance name , device name , resolution and frequency of multiple monitors (VGA and HDMI)

hi,
In my system multiple monitors are connected (VGA and HDMI). In need to know the
monitor instance name , device name , resolution and frequency of each monitor.. any solution?
i used wm class 'WmiMonitorConnectionParams' to determine Video output technology connection type and InstanceName.
But i didn't get the device name , resolution and frequency of each monitor.??
There are other wmi class like :
WmiMonitorBrightnessEvent
WmiMonitorConnectionParams
WmiMonitorRawEEdidV1Block
WmiMonitorListedFrequencyRanges
WmiMonitorDigitalVideoInputParams
WmiMonitorAnalogVideoInputParams
WmiMonitorID
WmiMonitorBrightnessMethods
WmiMonitorBasicDisplayParams
WmiMonitorColorCharacteristics
WmiMonitorDescriptorMethods
WmiMonitorListedSupportedSourceM…
WmiMonitorBrightness
WmiMonitorColorXYZinCIE
WmiMonitorSupportedDisplayFeatures
WmiMonitorBasicDisplayParams
Win32_VideoController
Win32_VideoConfiguration
Win32_VideoSettings Win32_DisplayControllerConfiguration
Win32_DisplayConfiguration
But unable to determine monitor having its corresponding values? please help me to find a solution .
is there any other method to get multi monitor details?
thank you

Hi sumith,
I read some documents about WmiMonitorConnectionParams class, it should be able to get the video putput technology by the D3DKMDT_VIDEO_OUTPUT_TECHNOLOGY enumeration.
D3DKMDT_VIDEO_OUTPUT_TECHNOLOGY enumeration
So what happens when you are using WmiMonitorConnectionParams class? What prevent you? Anyway, please see a example of using WmiMonitorConnectionParams class, maybe you could get some hints on it.
http://stackoverflow.com/questions/10085900/querying-wmi-for-d3dkmdt-video-output-technology
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Bluetooth connection to multiple devices with the same device name

I just got a new iPhone 4 and am having trouble connecting it to my car's bluetooth. We have two GM vehicles which both have bluetooth. I can connect to one vehicle with no problems, but when I try to connect to the other, the phone tries to connect to the first car since both have the device name of "General Motors". With my old phone, I could change the name of the connection in the phone so that each car had a different name. How do I do this on my iPhone?
Thanks for the help?

No. It's a limitation of the BlueTooth protocol.

Can I share an iTunes account with multiple devices?

I had an iPhone 3GS. Just upgraded to an iPhone 5C. I'd like to save the 3GS for our daughter to use as an iPad Touch. I realize that I'll need to wipe the 3GS clean and start over with new apps for her. I have a few questions:
Can I use my same iTunes account for both devices, or must I create a new iTunes account for my daughter's app and music purchases?
How do I change the device name in iTunes, so that her iPhone no longer bears my name?
Also, can I sync both devices on the same computer, or is it better to use different computers for the two devices?
Thank you!

Agile,
Any of the above will work, depending how you would like to set it up.
Given that kids tend to eventually grow up and be independent, the best long term answer for most people is to let her have her own account and her own library as soon as she can handle it. Keep in mind that content purchased from the iTunes Store is permanently tied to the account from which it was originally purchased, so separating later is a challenge.
If you want to sync multiple devices to the same library, that will work. Or if you want separate libraries (as I would recommend), they can be either on separate computers or on separate Windows user accounts on the same PC.
For the name change: Connect the device. When the name appears in the left sidebar of iTunes, highlight it and change it.

How to get the ASM to OS device name mapping

Hi all,
This seems to be an often answered question, but usually the answers specify what to do on the OS (e.g. run oracleasm etc) and/or in the ASM database running on the ASM Host (select * from V$...).
In our situation have plug-ins collecting data from Agents. Plugins collect data from Oracle db/ASM targets and from storage arrays.
Back on the OMS we want to be able to report on the ASM to OS device name mapping. To report, we use either the default metadata UI (i.e. data from the sysman.mgmt_emx_... tables) or we have a BI Publisher report that queries the OEM Repository Database (and can join the ECM tables from the different plug-ins).
The link between the ASM path and the OS device name does not seem to be collected by either the Oracle DB/ASM plug-in, nor by any other plug-in (Host/Storage/...).
It would be easy to go to Linux and run a few commands, but we need to support multiple platforms, like AIX, Solaris x86, Windows as well.
A complicating factor is that ASM can be installed in different configurations, e.g. using ASMlib or using udev...
I really suspect this wheel has been invented before?! Or is it really a matter of having multiple OS-specific low-level scripts and adding a bunch of instance parameters for allowing the user to specify all OS-specific path/utility names etc?
Any suggestions welcome... :-)
Many thanks,
Ed

Google is your best friend ;-)
Those are standard CGI variables, must be available in PHP/ASP(X)/JSP/your-favorite.
Anyway, try this:
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
/** Creates a table showing the values of all the CGI variables.
* Part of tutorial on servlets and JSP that appears at * http://www.apl.jhu.edu/~hall/java/Servlet-Tutorial/ * 1999 Marty Hall; may be freely used or adapted. */ public class ShowCGIVariables extends HttpServlet { public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { response.setContentType("text/html"); PrintWriter out = response.getWriter(); String[][] variables = { { "AUTH_TYPE", request.getAuthType() }, { "CONTENT_LENGTH", String.valueOf(request.getContentLength()) }, { "CONTENT_TYPE", request.getContentType() }, { "DOCUMENT_ROOT", getServletContext().getRealPath("/") }, { "PATH_INFO", request.getPathInfo() }, { "PATH_TRANSLATED", request.getPathTranslated() }, { "QUERY_STRING", request.getQueryString() }, { "REMOTE_ADDR", request.getRemoteAddr() }, { "REMOTE_HOST", request.getRemoteHost() }, { "REMOTE_USER", request.getRemoteUser() }, { "REQUEST_METHOD", request.getMethod() }, { "SCRIPT_NAME", request.getServletPath() }, { "SERVER_NAME", request.getServerName() }, { "SERVER_PORT", String.valueOf(request.getServerPort()) }, { "SERVER_PROTOCOL", request.getProtocol() }, { "SERVER_SOFTWARE", getServletContext().getServerInfo() } }; String title = "Servlet Example: Showing CGI Variables"; out.println(ServletUtilities.headWithTitle(title) + "\n" + "
" + title + "\n" + "\n" + "\n" + "CGI Variable Name
Value"); for(int i=0; iNot specified"; out.println("
" + varName + "
" + varValue); } out.println("
"); } public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { doGet(request, response); } }

Multiple devices showing in iTunes when only one device is plugged in

How come multiple devices show up in iTunes left-hand DEVICES column when I plug in only one device? When I plug in my iPhone, two of the same devices by the same name show up in the left hand column within iTunes, ALONG with two other iPhones in our family. Can anyone offer insight please? Thank you in advance!

You may have enabled wifi sync on your iPhone.

WRT610n Router lag with multiple devices?

Hi, I had a WRT54G (best router I've used!!) but ugraded to WRT610n after a wrt310n upgrade didn't work well with XBox. The WRT610n v2 has been great but I''ve noticed some lag issues when running multiple devices. While I understand this can be expected I don't expect it to this extent when not using that much and never had the issue before with the 54g. Are there settings that can be changed to improve this?
My setup is Mediacom 20/1.5 with a Motorola SB6120 modem. WRT610n router with a hard wired desktop (usually off and not used), a wireless n notebook wireless (also usually off) as my main use is for XBox 360. 1 wireless n with the new n adapter from microsoft and 1 wireless g with the old white adapter from microsoft. Usually only one is connected at once but sometimes my son will be on the other at the same time. I usually have no isse even still with the 2 (and never did before) but if any other pc is turned on or my Zune HD which connects also if I go on the marketplace seems to slow my setup down. As said before this was never an issue on the old setup but seems to be a problem now. Can I change any settings to stop this problem?

You might be facing the problem because the wireless settings set on your Router to its default settings, So you need to change certain settings on your Router, and that would improve the signal and speed quality on your wireless computers..
Open an Internet Explorer browser page on a computer hard wired to the router...In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
On the set-up tab change the MTU Size to 1365 and click Save Settings...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbors network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Now see if you can locate your Wireless Network and attempt to connect...

Wireless sync with multiple devices? + related q

Does anyone know what happens if you have multiple devices (with different content - but using the same library) set up on automatic wireless sync? My husband has successfully set up his iPhone to sync, but I'm nervous of doing the same for my iPad in case it causes some kind of conflict if they're both trying to sync at the same time.
I've searched and couldn't find anything about this.
Also does anyone know what happens if you shut down iTunes/the PC while a device is syncing in this way? My husband often plugs his iPhone into his alarm clock to charge while I'm still working on the PC, so it's doing the auto sync when he does that. If I don't notice and shut down the PC before it's finished, will that cause a problem?
Cheers

Thank you a lot Jolly Giant, and I have manual sync.
It seems that there is no way to keep an older version of the same app. Is this correct? I never directly replaced older version with newer version, but I suppose it did so when I did "transfer purchases" from iPad. Then it synced the app on older iPod, and it's not really like I have a choice: if I check its name, it syncs and I have the newer version which does not work. If I uncheck, it removes it from the device altogether.
Does not iTunes realize that I have two devices? Both are registered, etc. etc. can it not keep track of minimal system requirements? In fact it appears it's worse than this, older version are totally not allowed, even if someone has by chance the older file, iTunes will not allow.
And it is not like I have a legacy device, this iPod, even though it can not even run the latest iOS (that is, Apple dropped support after 4.2.1 on Nov 22, 2010), was sold new, and not for a cheap price, not so long ago.... btw branded as "third generation" (not everyone is familiar with hardware specs and technical sheets).
The problem will worsen the day my iPad will eventually abandon 4.2.1 in favor of a newer iOS and sure enough there will be newer versions of apps that no longer support 4.2.1 and which so far, I don't download, but in the future I will want to download for the newer device.
Thank you a lot Jolly Giant for your help and thank you to anyone who will help.
Daniela

Imessenger - Multiple Devices 1 Apple ID

My fiance and I each have an IPhone 4s and I have an IPAD 2 all activated through the same Apple ID. When sending messages to each other it appears it is always coming from the same device (I.e. If i send a message from my phone it shows up as her name on her phone). Is there a way to prevent this from happening? Should it not come from what the device is named?
Dave

There is that risk, but there are ways to avoid problems. See: http://support.apple.com/kb/HT1495 for advice on how to use multiple devices with the same computer.

Facetime on multiple devices with same Apple ID?

Hi...we have an iPad 1, iPhone 4S, iPod touch from 2010 and new iPod Touch yesterday.
I have not set up the new iPod Touch yet...but all the other devices are using the same Apple ID so I can buy apps and allow all my devices to get the apps installed for free. Great.
How can I set up my new iPod Touch to use the same Apple ID and also do Facetime? If I use the same Apple ID I would think that my other devices would start to ring when I try to Facetime. No?
If you know how to do this, can you please reply and give exact steps?
Thanks so much in advance.
-Eric

@dutra - Your suggestion worked like a charm. I have two options setup under my daughter's name in Facetime: Touch and iPAd. All I need to do is choose which I want to call. Easy-peasy.
@jeffreyfromorillia - This advice may be too late... But, register each device using your ID, as you should. Once this is complete do the following:
1 - Go to SETTINGS on device A
2 - Choose FACETIME
      - here you'll see your ID in the account field -- ignore it/leave it there.
     - below you'll see the email field, enter your daughter's email addy (you don't have to worry about the "+XXX"      unless she has more than once device because it applies only to the multiple device scenario)
     - IF you have used your email addy in the email field, click on Add Another Email and enter daughter's addy      here, then go back and choose your email addy and click remove
You are good to go. Repeat same steps for your stepdaughter's device.
If either girl has multiple devices you want to Facetime, follow steps 1 and 2, and in the email field click on Add Another Email and enter - [email protected] - then go back and delete orignal email entered. Do same for second device - [email protected], remembering to delete orginal email here, too.
On your device go to Facetime and edit contact - it prolly shows HOME / WORK / OTHER, click on it and choose CUSTOM, name it iPod, then enter the NEW email "[email protected]" and do same for second device, customizing the field to read iPad, or whatever you choose... Now you should have two options to choose from for contacting Girl 1. Repeat for Girl 2.
Hope this works for you, it worked out splendidly for me.
Cheers.

Multiple devices with the same GUID

Hi,
According to the Zenworks Command line utilities reference https://www.novell.com/documentation...a/bb15p2z.html
There exists an option to register a device with a new GUID by doing the following...
register (reg) [-g] [-k <key>] [-u <username> -p <password] <ZENworks Server addressort>
Registers the device in a Management Zone.
You can use the following options:
g - Lets you create a new device object with a new GUID and password for the device if you have multiple devices with the same GUID. When you register a device by using this switch, all the associations (policies and bundles) assigned to the original device object are removed. You cannot use this option to create a new GUID for a Primary Server or a Satellite device. The local user must have Local Administrator rights to use this option.
I would like to know if it is possible to have such a command line option for the agent installation. So built into the agent installer, a command line option to force the agent to register with a new GUID.
We are having CONTINUOUS problems with the above scenario. When we move devices from one computer lab to another and re-image the device, Zenworks keps trying to assign the same GUID to the device and this mixes up our Dynamic Workstation groups, which then affect the applicable policies to each device.
I would like to know if there is an option to tell the installer to stop remembering the GUID and simply register the device with a new guid on agent installation.
This way we can build that into the post imaging scripts which install the zenworks agent.

Hi Craig,
OK, I've had a look at the ZCM Reconcile rules and run a few tests to see if it is possible to get the machines not to reconcile (use a new GUID after imaging).
As I have explained before, sometimes this result is desired in our case especially when we move machines around from lab to lab.
So far, no matter what configuration I use, I cannot get Zenworks to generate a new GUID for a device that is getting re-imaged (without doing so only after the fact by unregistering the machine and reregistering the machine via the zac und and zac reg -g).
We use dynamic workstation groups to assign policies and bundles to machines so reconciling the devices is not necessary most of the time. We need an option to tell the machine to register with a new GUID on installation of the agent. Surely such an option can be built into the agent installer?
The options in the ZCM config management "reconcile settings" I tested with are:
Serial Number - Unticked/Unselected
Mac Address - Unticked/Unselected
Machine Name - Unticked/Unselected
Enable Differentiation - Unticked/Unselected
I then also tested:
Serial Number - Unticked/Unselected
Mac Address - Unticked/Unselected
Machine Name - Ticked/Selected
Enable Differentation - Ticked/Selected
and also:
Serial Number - Unticked/Unselected
Mac Address - Unticked/Unselected
Machine Name - Ticked/Selected
Enable Differentation - Unticked/Unselected
With all three different configurations, I re-imaged the same machine, which renames the machine via the first post imaging installation script to match the DNS name. Thereafter the Zenworks agent gets installed, which then renames the machine back to what it was registered into the Zenworks database with on first installation.
We need a method of telling Zenworks NOT to reconcile when we want it to. It should not reconcile every time and thereby rename the machine netBIOS name.
Is there any way to achieve this?
Originally Posted by CRAIGDWILSON
Quite Simple,
Let's say a HDD Dies and you replace it.
All you need to do is bring down an image and the machine will come back as it was with all the same WS and Device associations.
The same thing could apply if bringing in new Hardware.
If a new computer were to replace an old computer but the name stayed the same, everything could be automatic depending on the rules setup.
It is all a matter of how you tell ZCM to reconcile devices.
The Help in the ZCC under these items should explain how it works so you can setup your rules to meet your use cases.

PhotoStream: Multiple Devices and Performance Issues

Had a bad night last night with PhotoStream. I have an iPhone 4S (AT&T), my wife has an iPhone 4 (VZW), we have an iPad 1 (Wi-Fi), Apple TV 2 (Ethernet), and a 2011 Mac Mini (Wi-Fi)... all in the same house that has a Time Capsule and is connected to AT&T DSL service, 3.0Mbps service (average speed test results are 2.65Mbps down, 315kbps up). Oh yeah, there's a micro-cell in there too but anytime there's trouble that gets shut off first so its irrelevant for this discussion.
So yesterday was Halloween and we both took alot of photos away from the house with the iPhones. Got home, started using the internet, noticed the performance was HORRIBLE. Speed test showed over 1,000 ms ping latency (I still can't believe I actually waited for it to finish the ping test) and nothing was getting through for the download / upload test. I have never (believe it or not) with AT&T DSL seen it get this bad. Its been bad before, don't get me wrong, but this was surprising even to me.
How did I come to the conclusion that PhotoStream was my issue you may ask? Well, its sort of a long story, but bear with me... The other day, we started having trouble with the Apple TV 2, which for the most part is pretty solid. My wife was streaming Netflix movies and it was stopping every 30 seconds. It was looking at this issue that had me first raise suspicions about PhotoStream. Just days before this problem started, I had enabled PhotoStream on the Apple TV 2. SO I did the first most logical thing anyone could do, I took a step back and disabled it. Problem solved. Thought nothing of it, yeah I was a little discouraged that I couldn't use it on the Apple TV 2, but not a big deal, my favorite part of PhotoStream is using it to get the photos into iPhoto without having to plug the iPhones in so I said to myself "I'll just keep putting the photos into Events and Albums until they work out the kinks on the AppleTV 2" thinking perhaps the Apple TV 2 needs to not update PhotoStream while videos are being played. They can fix that at some point, right? Sure they can.
Now, back to this other issue. My bandwidth last night was completely crapped out, and I was determined to prestige on Black Ops one last time so this had to change STAT! I mean, come on! I was at Level 47 and I was ready to GO! My internet connection just wasn't having it. I powered off the router, rebooted the modem, and powered on the rotuer again. Everything came up beautifully. I jumped into some Nuketown 24/7, 4 green bars next to my name and I was happy. After we lost Bravo, which on Nuketown takes about a minute and a half if both teams are fighting over it, I'm lagging like crazy and I have that little red bar that no one likes to see next to my name. Sure enough, speedtest results are all whacked out again.
So I'm sitting there thinking to myself, what could this be? My wife was watching cable TV, my son was asleep... essentially the Xbox 360 was the only thing trying to use the internet... I thought... until I remembered our iPhones and the photos we had just taken and all the devices that would be simultaneously trying to update PhotoStream. Let's list them again, shall we?
iPhone 4S - Upload to Stream and Download from Stream
iPhone 4 - Upload to Stream and Download from Stream
iPad 1 - Download from Stream
Mac Mini - Download from Stream
So how can I prove this crazy theory of mine that the great and wonderful PhotoStream was choking my internet connection? Simple.
iPhone 4S - PhotoStream OFF
iPhone 4 - PhotoStream OFF
iPad 1 - PhotoStream OFF
Mac Mini - PhotoStream OFF
Speed test results immediately after doing this?
2.73Mbps down / .31Mbps up with 26ms ping time (used the Speedtest.NET app on the 4S).
Sadly, this means that for now, I cannot use PhotoStream, however I did manage to Prestige on Black Ops which made me happy, and the iPhone 4S can still be plugged into the Mac Mini to download my wonderful looking photos.
That's right, I didn't throw away the charger cables just yet and if you want to start talking about iTunes Wireless Synching with multiple devices in the same house, I can gladly take up some more of your time. Thats right, its OFF as well!

I just wanted to report that this is still an open and particularly nefarious bug. I've got a fairly idealized Apple household with 2 iPhone 4's, a 'new' iPad, a 13" Macbook Pro, Airport Express and our most recent addition this weekend... an Apple TV.
While I had no particular interest in enabling Photo Stream, I turned it on while messing with the screen saver settings and didn't think anything about it. As I began to play with my new toy I was immediately disappointed with all the long spinners and timeouts in Netflix. Later that day I noticed my computer and iPad were having similar connection issues. My first thought was 'oh, Comcast must be acting up, that's why my new Apple TV isn't working so well'.
Fast forward 3 days to today and our network issues were still occuring and I decided I needed to figure out what was going on. After mucking around in network settings for a couple hours I half-jokingly decided to disconnect the AppleTV on the whim that the issues started at the same time I hooked it up. Sure enough my network issues disappeared. I even went so far as to run continuous pings to various IP's outside my home network and watch the timeouts come & go as i plugged/unplugged my ATV. Now knowing the ATV was the problem I set out to figure out what in particular was causing it. As soon as I signed out of Photo Stream everything was working perfect again. Netflix on the ATV is quick & responsive, no more spinners or timeouts. My other devices aren't plagued with random disconnects, dns failures or slow downloads.
Long story short, something is bugged in AppleTV's Photo Stream support. Mine didn't appear to be downloading any new photos, it had stopped with 255 photos downloaded. Not sure if that was all I had in iCloud or maybe AppleTV can only pull down 255 max? Maybe 255 is the magic number where it hits the bug that causes this behavior? Either way, it appeared to be only affecting the outgoing internet connection, when I had a continous ping going to another machine on my internal LAN it didn't appear to get affected.
Hope this helps someone at Apple track down the bug. While someone technical can probably troubleshoot these issues I could see someone like my mom never putting the 2 + 2 together that her internet problems started around the time she enabled Photo Stream on her AppleTV and instead blaming it on 'the internet acting up again' and of course calling me months later to look into it for her.

Multiple devices, chats privacy?

I log onto multiple devices using the same skype name and not all my chats and calls seem to show up when i'm on the other device. It doen't always take me back as far as it says it will. Why is that? Is it something in my privacy settings?

I also need this feature. I use Skype on Windows 8, Windows RT, and Windows Phone 8 and need to have access to my chat history across all devices, even if the others were NOT on at the time the chat occurred.
Thanks!!

Device name on Linux

Dear All
during installation we used devices from linux multipath software now we want to remove linux multipath and use vendro multipath.
we had installed oracle using ASM.
Is there a way to change the device names from /dev/mapper/mpathX to /dev/sdb ....?
Best regrads

ASMLib scans all disk devices during startup, or when using the oracleasm scandisk command, to search for disk header information to identify ASM disks. If there are multiple paths to one and the same disk, ASMLib will choose only one of the paths, because ASM cannot handle seeing the same disk twice. In a multipath environment, ASMLib needs to be configured to ignore individual device paths and instead use the multipath device name. If your previous multipath environment was configured properly it should have ORACLEASM_SCANORDER and/or ORACLEASM_SCANEXCLUDE defined. Here is a documentation link:
http://www.oracle.com/technetwork/topics/linux/multipath-097959.html

Multiple Device Names

Similar Messages

Maybe you are looking for