Multiple devices with a bridge/router?

I have an e3000 router running off of a cable modem and added a WET610N bridge to hook up a tv, blue ray, and receiver in a media counsel in another room. Since i have 3 devices but only 1 port on the bridge, what else should i get? Should i have purchased a different bridge? Add another switch/router?

Get a standard ethernet switch and connect it to the bridge.

Similar Messages

I have multiple devices with the same cerificate, once I have a an exception for one, FF denys access to the others. I cannot change the certificates, I need to stop FF blocking them.

I have multiple devices with the same cerificate, once I have an exception for one, FF denys access to the others. I cannot change the certificates, I need to stop FF blocking them.
== This happened ==
Every time Firefox opened
== I attempt to access a web front end on an IBM SVC device

You can't use the same certificate more than once.
See also [[Certificate contains the same serial number as another certificate]]

Multiple devices with the same GUID

Hi,
According to the Zenworks Command line utilities reference https://www.novell.com/documentation...a/bb15p2z.html
There exists an option to register a device with a new GUID by doing the following...
register (reg) [-g] [-k <key>] [-u <username> -p <password] <ZENworks Server addressort>
Registers the device in a Management Zone.
You can use the following options:
g - Lets you create a new device object with a new GUID and password for the device if you have multiple devices with the same GUID. When you register a device by using this switch, all the associations (policies and bundles) assigned to the original device object are removed. You cannot use this option to create a new GUID for a Primary Server or a Satellite device. The local user must have Local Administrator rights to use this option.
I would like to know if it is possible to have such a command line option for the agent installation. So built into the agent installer, a command line option to force the agent to register with a new GUID.
We are having CONTINUOUS problems with the above scenario. When we move devices from one computer lab to another and re-image the device, Zenworks keps trying to assign the same GUID to the device and this mixes up our Dynamic Workstation groups, which then affect the applicable policies to each device.
I would like to know if there is an option to tell the installer to stop remembering the GUID and simply register the device with a new guid on agent installation.
This way we can build that into the post imaging scripts which install the zenworks agent.

Hi Craig,
OK, I've had a look at the ZCM Reconcile rules and run a few tests to see if it is possible to get the machines not to reconcile (use a new GUID after imaging).
As I have explained before, sometimes this result is desired in our case especially when we move machines around from lab to lab.
So far, no matter what configuration I use, I cannot get Zenworks to generate a new GUID for a device that is getting re-imaged (without doing so only after the fact by unregistering the machine and reregistering the machine via the zac und and zac reg -g).
We use dynamic workstation groups to assign policies and bundles to machines so reconciling the devices is not necessary most of the time. We need an option to tell the machine to register with a new GUID on installation of the agent. Surely such an option can be built into the agent installer?
The options in the ZCM config management "reconcile settings" I tested with are:
Serial Number - Unticked/Unselected
Mac Address - Unticked/Unselected
Machine Name - Unticked/Unselected
Enable Differentiation - Unticked/Unselected
I then also tested:
Serial Number - Unticked/Unselected
Mac Address - Unticked/Unselected
Machine Name - Ticked/Selected
Enable Differentation - Ticked/Selected
and also:
Serial Number - Unticked/Unselected
Mac Address - Unticked/Unselected
Machine Name - Ticked/Selected
Enable Differentation - Unticked/Unselected
With all three different configurations, I re-imaged the same machine, which renames the machine via the first post imaging installation script to match the DNS name. Thereafter the Zenworks agent gets installed, which then renames the machine back to what it was registered into the Zenworks database with on first installation.
We need a method of telling Zenworks NOT to reconcile when we want it to. It should not reconcile every time and thereby rename the machine netBIOS name.
Is there any way to achieve this?
Originally Posted by CRAIGDWILSON
Quite Simple,
Let's say a HDD Dies and you replace it.
All you need to do is bring down an image and the machine will come back as it was with all the same WS and Device associations.
The same thing could apply if bringing in new Hardware.
If a new computer were to replace an old computer but the name stayed the same, everything could be automatic depending on the rules setup.
It is all a matter of how you tell ZCM to reconcile devices.
The Help in the ZCC under these items should explain how it works so you can setup your rules to meet your use cases.

Assigning ports to multiple devices with HH5

Im am trying to assign ports to each of my gaming devices (PS4, Xbox One and PC), these devices share some ports such as 3074, 80, 53, etc. I have set up the PS4, but when I tried to set up the Xbox One it wouldn't let me as the PS4 has duplicate ports.
Is there any way to set up multiple devices with the same ports?

You can only forward the same port(s) to one device.
If you forget about using port forwarding, and simply allow uPnP to allocate the ports, then you should be able to use one device at a time.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

If i have multiple devices with my icould account can they all read my text messages?

If i have multiple devices with my icould account can they all read my text messages?

Welcome to the Apple Community.
They can all share your iMessages, just make sure the settings on each device are set to send and receive from the same numbers and addresses.

HT4914 Can you use iTunes Match on multiple devices with different apple id's ?

I have multiple phones with the same iTunes ID but they have different apple ID , will the iTunes Match work with all my devices ?

I've got the latest version of iTunes & it's supposed to be able to be enabled under top panel "store" then appear down left side panel to subscribe. Which makes me think that it musn't be able to be used if you're running XP as it's not there....

How do set up multiple devices with multiple graphs in labview

Hello,
I am new at LabView, and we are trying to setup a test rig to measure voltage, pressure and flow rates. We are currently using a NI-6009USB box and Labview version 8.2. Our problem lies in setting up the actual measurements on separate graphs. How do i go about setting up the daq-assistant to measure mulitple devices, and graph them on their own graphs? We also need to know how to program in when measuring flow, how to convert it from square wave form to a calibrated curve?
Any help would be greatly appreciated!
Nate

When you configure the DAQ Assistant, you will be first asked to select the measurement type. Assuming that you have voltage sensors because you have the 6009, you select Analog Input>Voltage. You then get a list of devices. Since you only have one, it should be listed as Dev1. Expand that and then pick the channels you have connected to the sensors. Just like it says at the bottom of the of the channel window, you can select multiple channels with <CTL> or <SHIFT> click. After you've done that, the next window is where you select your sample rate, number of samples, etc. You can also select a custom scale for each channel. This is where you would enter any formula you have from the sensor vendor in order to convert a voltage reading to scaled units.
The output of the DAQ Assistant is a dynamic data type. You can wire this to a single graph to display all readings together or use the Split Signals function to break out individual channels for separate graphs.
Message Edited by Dennis Knutson on 02-22-2007 03:33 PM
Attachments:
Split Signals.PNG ‏4 KB

What is the best way to manage multiple devices with one iMac - different users with seperate itunes accounts or one mac user with different itune logons and libraries?

Hello
I have just purchased an imac which I am very happy with. In our household we also have two iphones (one mine and one husbands) and one ipod (my sons). We all have individual itunes accounts set up on our previous computer (not a mac). We have sepereate apps and music, although there may be the odd occasion where we would like to share a song (if this is possible) across devices.
I am just wondering the best way to manage these devices using the new imac. Should I create individual accounts to logon to the imac, then from within these launch our own itunes accounts and sync our devices with these. Or should I be using one version of itunes, logging on to this with our different itunes usernames and storing things in libraries.
Any help would be greatly appreciated.
Thanks

I am presuming that we cannot share downloaded apps and music between accounts because of the copyright issue,
Though I'm no copyright lawyer, as long as it's within a household, you can share content among users. Such sharing is, absent specific language preventing it not present in the iTunes Store terms of use, generally considered to be "personal use". So you can share apps and music amongst your users on your computer and with their devices. You just can't give any of that content to friends or relatives who don't live with you.
What I am not clear on, it making sure that this appears in each itunes account - is it easy to find the file storage folders that match the itunes accounts and what would these be?
The iTunes library and files are by default in a user's Home/Music folder. But you don't have to find the folder; in fact putting a file into the folder yourself won't add the file to iTunes. Just drag the file into the iTunes window. iTunes will copy it to the correct location.
Regards.

Multiple devices with one email address

I have several devices with skype. I'd like any device to be able to call any other device, but only use a single email address. Basically, Is there any way to do this? How?

Each user should have their own icloud account, otherwise they end up getting the same emails, contacts, calendars, notes, reminders, etc. - usually not what you want. But if all have been sharing the same itunes ID, keep it that way, you can have different IDs for itunes and icloud.
If you already have another icloud account, and want to set it up on a device, then go to Settings>icloud, scroll to bottom of screen and tap Delete Account. This only disconnects the device from that account, no data is lost on icloud. Then enter the account ID that you want to use.
To create a new icloud account, go to
http://www.apple.com/icloud/setup/

Facetime on multiple devices with same Apple ID?

Hi...we have an iPad 1, iPhone 4S, iPod touch from 2010 and new iPod Touch yesterday.
I have not set up the new iPod Touch yet...but all the other devices are using the same Apple ID so I can buy apps and allow all my devices to get the apps installed for free. Great.
How can I set up my new iPod Touch to use the same Apple ID and also do Facetime? If I use the same Apple ID I would think that my other devices would start to ring when I try to Facetime. No?
If you know how to do this, can you please reply and give exact steps?
Thanks so much in advance.
-Eric

@dutra - Your suggestion worked like a charm. I have two options setup under my daughter's name in Facetime: Touch and iPAd. All I need to do is choose which I want to call. Easy-peasy.
@jeffreyfromorillia - This advice may be too late... But, register each device using your ID, as you should. Once this is complete do the following:
1 - Go to SETTINGS on device A
2 - Choose FACETIME
      - here you'll see your ID in the account field -- ignore it/leave it there.
     - below you'll see the email field, enter your daughter's email addy (you don't have to worry about the "+XXX"      unless she has more than once device because it applies only to the multiple device scenario)
     - IF you have used your email addy in the email field, click on Add Another Email and enter daughter's addy      here, then go back and choose your email addy and click remove
You are good to go. Repeat same steps for your stepdaughter's device.
If either girl has multiple devices you want to Facetime, follow steps 1 and 2, and in the email field click on Add Another Email and enter - [email protected] - then go back and delete orignal email entered. Do same for second device - [email protected], remembering to delete orginal email here, too.
On your device go to Facetime and edit contact - it prolly shows HOME / WORK / OTHER, click on it and choose CUSTOM, name it iPod, then enter the NEW email "[email protected]" and do same for second device, customizing the field to read iPad, or whatever you choose... Now you should have two options to choose from for contacting Girl 1. Repeat for Girl 2.
Hope this works for you, it worked out splendidly for me.
Cheers.

Can multiple devices with the same apple id use airdrop

Can I use Airdrop between multiple devices sharing the same Apple ID?

I don't know but somebody will reply if you bump this message.

Multiple Devices with Same ID but Different Contacts

My family and I all use one apple id on one computer. I have 5 kids so they all wish to share music and such on their multiple devices.
But, they wish to keep their contacts separate.
Is there an easy way to do this?
I have heard of having several iClouds, but I wish to not do this if possible.
Thanks!

If you are comfortable still using the same AppleID, you can always purchase more storage at a very low cost. Just go to settings>icloud>storage & backup>and change storage plan. You can upgrade for as little as $10. Hope this helps!

Having to delete your same iMessage conversations on multiple devices with iCloud enabled

I have iCloud enabled on my Mac, iPad, and iPhone. Apple could possibly develop a feature where if one device with iCloud that is turned on deletes a message conversation, it deletes the converstation on your other (turned on) iCloud devices as well. This way, when you switch from using your iPhone to iPad, you will not have the 10 different converstations you started on your iPhone that were deleted, on your iPad to delete as well.

I'm sorry I'm not being clear. I know that the sent boxes are separate. What I meant by combined mailboxes was the inboxes for each of the two accounts across all devices. That is, say, for my MobileMe inbox, being able to see all contents of the MobileMe inbox on all my devices, regardless of which device I first read the message on. And then the same for the other mailbox too. And finally, for these to be marked read / unread on a consistent basis and to be notified on the iOS devices too.
Not too much to ask?!

Multiple VLANSs with 1 bridge group for DLSw+

I am working on a network with a DLSw+ on a 6500 MSFC with multiple VLANs. There is one bridge group and it is mapped to DLSw + and to each VLAN. It is working, but I want to know if there is an and advantage placing each VLAN in it's own bridge group and mapping each bridge group to DLSw+.
I have an example of the config I am referring to below: I would appreciate any feedback or comments on this.
bridge 1 protocol ieee
dlsw local-peer peer-id 10.88.1.2 group 1 border promiscuous
dlsw bridge-group 1
dlsw bridge-group 2
dlsw bridge-group 3
dlsw bridge-group 4
dlsw bridge-group 5
dlsw bridge-group 6
dlsw bridge-group 7
dlsw bridge-group 8
int vlan 10
bridge-group 1
int vlan 11
bridge-group 2
int vlan 12
bridge-group 3
int vlan 13
bridge-group 4
int vlan 14
bridge-group 5
int vlan 15
bridge-group 6
int vlan 16
bridge-group 7
int vlan 199
bridge-group 8
Thanks,
Bruce

exactly.
When the router receives bridged packet whose destination MAC address is not on the router's bridge table, the router will flood the packet to all the VLANs if all the VLANs are on the same bridge group. Similary, the router forwards broadcast traffic to all VLANs.
If different VLANs are under different bridge group, the traffic mentioned above is noly forwarded to DLSw.l

Running newest Airport Extreme with multiple devices with seemingly random success

Recently installed new Airport Extreme in office space. Connection to the wifi network works on all computers and devices (mix of Mac and PC) but only connects some of them to the internet. Airport Utility on one Mac shows green connection to internet through airport and another Mac show amber no connection to the internet through Airport.
Tried Hard Reset and Factory Reset. Also recycled power to modem.

The shaw cable modem is definitely working in router mode.
Otherwise the AE would not work at all with this setup.
That it half works is more a symptom of where Apple is going these days.
I want you to reset the AE to factory and redo it.
1. Reset to factory.
Factory reset universal
Power off the AE. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
2. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics. 2-20 characters.
eg AEgen6 for basestation name.
Please use 2 wireless names, AE24ghz and AE5ghz for the two different bands.. with fixed channels as this also seems to help stop the nonsense.
3. WPA2 Personal wireless security. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
4. Ensure the AE always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the AE. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the AE is main router it will not be an issue but you have it bridged.
Here is how to setup static IP and how you share the IP range between the two routers.
https://discussions.apple.com/message/25135547?ac_cid=tw123456#
5. If you continue having issues.. Apple Gen6 AE and latest TC also have WAN port issues.. I want you to connect from the shaw modem router to the AE, using LAN1 instead of WAN.. you can also test on LAN2 and LAN3. It makes no difference which port is used for this kind of setup.. and WAN is definitely more of an issue.
6. Be very carefully that network names are not being duplicated.. Yosemite has some nasty bugs where it keeps finding ghosts of the computer name and then incrementing them until the dhcp server runs out of addresses.. go back and check each computer and device is as setup with name.
Post how all that goes.

Multiple devices with a bridge/router?

Similar Messages

Maybe you are looking for