Multiple DHCP servers Not authorized to start in domain.

Hello all,
Suddenly in our network, we started noticing that DHCP servers are getting unauthorized automatically and stop servicing to their clients.
it is happening randomly to all my locations and post restarting the service and authorize the service will solve the issue.
I dont know why this behavior and still some dhcp servers are prompting with this issue.
Upon checking the evenlog, i am able to find that the event id "1046" with the error message loggind in those machines stating that
The DHCP/BINL service on the local machine, belonging to the Windows Administrative domain CORP.DRREDDYS.COM, has determined that it is not authorized to start. It has stopped servicing clients. The following are some possible reasons for this:
This machine cannot reach its directory service enterprise and it has encountered another DHCP service on the network belonging to a directory service enterprise on which the local machine is not authorized.
Please provide your inputs on this behavior.
Regards,
Andrew

Could anybody update on this cause.

Similar Messages

NetBoot and Multiple DHCP Servers

Hey everyone,
We have a NetBoot machine running here at my school (where I work). It was working like a champ until a couple of weeks ago when our network got upgraded and there are now 2 DHCP servers on our network. That, for some reason, is totally screwing up our NetBooting process.
Here's what I think is happening, and maybe someone can tell me if I right or wrong. NetBoot (or BSDP protocol) is a "broadcast" protocol. (That means it's always just floating around out there on the network. ) NetBoot (BSDP) protocol gets injected into the DHCP stream, and any machine that gets DHCP can get BSDP, and essentially NetBoot.
The problem is with BSDP. BSDP protocol wants to have all of it's "broadcasts" come from the same server. So when we had 1 DHCP server, everything was fine, because client machines would get their whole NetBoot process from one machine... all of the BSDP broadcasts were coming from our 1 DHCP server.
Now, we have 2 DHCP servers. What happens is, a client will get some of it's BSDP broadcasts from one DHCP server, and some from another... which it does not like at all.
I recently read somewhere that it is possible to somehow make one of our DHCP servers the "authoritative" server, to which all of the clients will go to get their NetBooting info.
Does this sound in any way right? Are we on the right track ? Has anyone seen this before? Any help would be greatly appreciated. Thanks a million.
Mike

Now, we have 2 DHCP servers. What happens is, a
a client will get some of it's BSDP broadcasts from
one DHCP server, and some from another... which it
does not like at all.
Not unless your new DHCP server is also a NetBoot server and is set to provide NetBoot services. BSDP and DHCP are not the same thing. If what you were saying were true, it wouldn't be possible to have DHCP and NetBoot offered by different servers.
It IS possible, however, that the two DHCP servers are causing problems by both servicing DHCP requests for the same clients. If you've got multiple DHCP servers on the same subnet (or your router's configured to pass DHCP requests between subnets), you should make sure that only one of the DHCP servers answers requests from any given client. In our world, our Novell server is the default DHCP server on our subnet, but I keep a list of excluded MAC addresses on that server so that my Macintosh clients don't get addresses from it. On the Mac OS X server, I'm careful to limit my address ranges only to those machines which have static address maps in NetInfo. That way, our servers coexist, but they don't overlap.
It's not clear from your message whether your previously solitary DHCP server was your Mac OS X server, or whether one of the two DHCP servers is that box. But whatever the servers are, it might be helpful to turn off one of them to see if the same problem occurs (assuming you can, without major network disruptions). If that's not possible, can you talk to your network admins to see if there's some way to isolate your clients and one of the servers--in other words, see if there's some way to keep DHCP servers from responding to the same requests.
There may be any number of other reasons why this problem has cropped up. You may need to dust off a hub and a copy of Ethereal or EtherPeek to sniff what's happening on the network. You might also try NetBooting in verbose mode, to see where the process craps out. IIRC, there'a decent guide for this kind of troubleshooting over at Bombich's site (www.bombich.com).
Good luck.
David Walton

DHCP scope setings from multiple DHCP Servers

Is there any way to check any particular option is configured in all scopes from multiple DHCp servers.
for eg:- we would like to check if any scope has option 150 is configured in multiple DHCP servers.
I guess there are lots of cmdlets available from Win2k12 DHCP servers.
Regards, Nidhin.CK

Hi, Nidhin...
I use NETSH tool for this, can redirect results to file or filter w/ FIND.
Example:
NETSH dhcpserver \\SERVERNAME dump | FIND /I "set optionvalue 150"
Hope this helps!
Marcelo Lucas Guimarães - MCP, MCTS, MCDBA, MCITP Blog: http://mlucasg.wordpress.com

You are not authorized to start the administration workset - GP

I'm trying to launch the Administration Workset for GPs, to release objects from the "Life and Work Events" GPs from ESS, assigned GP Administrator to user and get the error:
"You are not authorized to start the administration workset"
Also tried adding virtually all GP and CAF roles to used with no luck, any ideas??
Max points to the correct answer =)

try to add a role called CAFUIADMIN and provide your user with this role. Otherwise all you need is the GP Adminstrator role.
hope that helps
Abdul

Authorized DHCP Servers not showing up in Authorized list.

I have used ADSI edit to validate that the correct servers are under: CN=NetServices,CN=Services,CN=Configuration,DC=Domain,DC=com
Currently we are in 2003 R2 mode for the Domain but all of our DC's are Windows 2008R2.
I did find a value for showInAdvancedViewOnly is set to TRUE.
Thank you,
Scott

If you still have the ticket open with Microsoft Premier Support for the DHCP migration, I would contact the engineer that helped you explaining what you are seeing so they can resolve it. After all, it is part of the ticket.
Please note, that TechNet forum support is not aligned with Microsoft Premier Support. They are two separate entities.
In the meantime, you can try the following, but I would still email/contact the engineer assigned to your ticket for verification, since they are familiar with your infrastructure and servers. (This was quoted from:
http://support.iyogi.com/networking/internet/when-netsh-dhcp-show-server-command-is-executed-and-you-are-getting-invalid-dhcp-server-references.html )
Run the ‘Netsh’ command to verify, if the ‘CN=NetServices’ container contains the references to the invalid DHCP servers.
Check the properties of the DHCPROOT key under CN=Configuration, CN=Services, ‘CN=NetServices’, ‘DC=Domain’, and ‘DC=com’ to verify if there is a ‘DHCPServer’ attribute containing the references for the invalid DHCP servers.
Delete invalid references.
Force replication
After replication is successful, verify by executing the ‘netsh dhcp show server’ command.
Ace Fekay
MVP, MCT, MCITP/EA, MCTS Windows 2008/R2 & Exchange 2007, Exchange 2010 EA, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Technical Blogs & Videos: http://www.delawarecountycomputerconsulting.com/
This post is provided AS-IS with no warranties or guarantees and confers no rights.

WLC Controllers with Multiple DHCP Servers

Hello All,
I have a central office with (2) 4402 WLC's and about 25 Branch offices throughout the country. Currently all AP's are static IP'd with IP's from the local Branch office subnets. However the Clients all pull their IP's from a Central DHCP server here at corporate.
What I would like to do, is have clients get local branch office IP's from the AP located at that site. So rather than using a central DHCP server here at corporate using a single subnet for all wireles clients. Clients would be assigned local IP's by preferably local DHCP servers. I am having trouble finding an answer to this problem within the documentation. Any help or Ideas would be appreciated.

were not using any radius type authentication. But I am still a bit hazy on how the hreap thing works, I did read the link and it is very helpful but I was kind of thrown into this one without much wireless background. Right now when I change an Ap to H-reap it somehow disables the a radio. I cant seem to get that back working which im not all that sure is even that big of a deal. The SSID is configured for local switching and central auth.

"Client not authorized" after start, OK after deploy

Whenever I try to create a session bean (stateful or stateless doesn't matter) right after app server startup, I get the exception "javax.ejb.AccessLocalException: Client not authorized for this invocation.". If I then redeploy the ear everything works fine. If I disable and then enable the application, the error comes back.
My role mappings are in the "sun-application.xml" file. The same EAR works fine in App Server 7 and 8 but not in 8.1.
Anyone else seen this?

Hi,
you are using Sun Java System App Server, right?
In my case it was a policy problem... I had some servlets fetching classes via Java Reflection.
I was lazy an set the <domain1>/config/server.policy file to AllPermission granted, not nice, but worked.
You may finetune your policies :-)
bye!

WLC 5508 and Multiple DHCP servers in different sites?

Hi
I work for health authority in our region and we just purchased a Cisco wlc 5508 controller along with 25 3500 AP's. We have multiple sites with different IP subnets in each, all connected by a frame relay (owned by ISP). Each site has its own DHCP server. I have the controller in our main site. So when I take an AP to a remote site, the Ap gets an DHCP address from local DHCP server (which is great) and contacts controller and joins controller. Everything is good. BUT, when a client joins at the remote site, it gets an address from a previous site which will not work because the client is now on a different subnet. We dont use Vlans as they dont transvers the frame relay. I need those clients to obtain DHCP from the local DHCP server from the site they are on. Is that possible??
I have updated the controller to latest version as well.
Thanks
Bryan Yaciuk, CCNA
Parkland Regional Health Authority

We call this as HREAP LOCAL SWITCHING!! but here is the catch.. everytime the AP joins the new site.. we need to configure the VLAN mapping and this wil do it for you!! Here is the link which will resolve ur issue..
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807cc3b8.shtml#ll
Lemme know if this answered ur question and please dont forget to rate the usefull posts!!
Regards
Surendra

NAC 4.5 ADSSO on multiple AD servers not working, how to troubleshoot?

Hi All,
I'm handling a NAC (CAS and CAM ver 4.5) to be implemented to a network on production. The network has two working AD servers, one acting as back-up. We want to configure the NAC to be able to run ADSSO even if the active AD fails, so we configured NAC to run ADSSO on multiple servers. I followed the documents, run ktpass for multiple ADs, installed kerbtray to see Kerb tickets, but still I'm puzzled of the problem. My CAS shows the the ADSSO service is already started, but my workstation cannot perform Single-sign On. After the "performing AD authentication" window, the agent then reverts back to as a local account. Please help guys. I'm willing to share other details about this. Thanks.
Regards,
Dan

Hi Faisal,
The Unauthorized role is already in all trafic enabled policy. My problem is that the KT that is shown in the workstation is different from the one I created using ktpass, although I matched the cases of the domain and the one in the ktpass. I deeply appreciate if you can help. Thanks.
Regards,
Dan

Load balancing across multiple application servers not working with JCo RFC

We have a problem where inbound messages to the Mapping Runtime engine (ABAP -> J2EE) are not load balanced over application servers. However, load balancing does take place across server nodes within one application server.
Our system comprises of the following:
Central Instance (2 X server nodes)
Database Instance
2 X Dialog Instances (with 2 X server nodes each)
The 1st application server that starts is usually the one that is used for inbound messaging.
We have looked at the sap gateway configuration and have tried various options without much luck:
i.e.: local gateways vs. one central gateway, load balancing type by changing parameter gw/reg_lb_level, see: http://help.sap.com/saphelp_nw70/helpdata/EN/bb/9f12f24b9b11d189750000e8322d00/frameset.htm
Here are our release levels:
SAP_ABA     700     0012     SAPKA70012
SAP_BASIS     700     0012     SAPKB70012
PI_BASIS     2005_1_700     0012     SAPKIPYJ7C
ST-PI     2005_1_700     0005     SAPKITLQI5
SAP_BW     700     0013     SAPKW70013
ST-A/PI     01J_BCO700     0000          -
Any help would be greatly appreciated.
Many thanks

Tim
Did you follow the guide here:
How to Scale Up SAP Exchange Infrastructure 3.0
Learn what the most likely scaled system architecture looks like, and read about a step by step procedure to install additional dialog instances. The guide also walks you through additional configuration steps and the application of Support Package Stacks.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c3d9d710-0d01-0010-7486-9a51ab92b927
We followed this guide for XI3.0 and PI7.0 and works successfully!

Multiple DHCP servers

Hi gurus,
I have DTUs on shared networks. Each network has a Cisco 2610 router running the DHCP Relay.
Because on these networks there are also some PCs other than DTUs, I would DHCP Relay sets different DHCP server IPs for DTUs from PCs. PCs should get/refer to a general DHCP server, while DTUs should get/refer to the SRS DHCP.
Do you know if it is possible?
MTIA

Hi,
Why should you use a separate server for Sun Ray DTU's. Keep your setup as
simple as possible and that is perfectly possible with Sun Ray.
Just use your DHCP server that you use for your PC environment and start
your Sun Ray server with "utadm -L on" (which does not setup a DHCP
server on your Sun Ray server).
Still Sun Ray DTUs like to know the SR specific information. To provision these,
have a look at:
http://blogs.sun.com/ThinkThin/entry/sun_ray_provisioning
I have best experiences with option 66 in the standard DHCP server and .parms file.
Jaap

OAM Webgate - webgate agent point to multiple Access Servers?

I am trying to find out if it is possible to have a single webgate agent on OHS server point to more than one OAM server.
We have multiple OAM servers (not clustered) behind a load balancer. When I set up an agent for the OHS server, I copy the cwallet.sso and ObAccessClient.xml from, for example, OAM server 1. The OAM servers are all setup the same.
It seems the cwallet.sso is tied directly to that OAM server, and if I try to point the OHS to server 2, I get errors. I change the ObAccessClient.xml to the url specified in the load balancer.
Is it possible to have one set of files (cwallet.cco and ObAccessClient.xml) that would work on different OAM servers?
thanks in advance.
Mark

In that case, the default behaviour is that a WebGate cannot connect to an OAM server in a different installation (different to the one it is registered in).
However, this functionality is available in a Multi-Data Centre architecture, details of which can be found here: Using Multi-Data Centers - 11g Release 2 (11.1.2.2)
I think this may meet your requirements?
Regards,
Colin

ISE Not Identifying AD Group Attributes when using Multiple ISE Servers

So we have multiple ISE Servers with differing personas. I was having an issue with our new ISE setup not identifying AD Group Attributes when using them in Authorization rules.
We have 2- 3395 appliances running Admin and Monitoring/Troubleshooting Personas and 2- 3395 appliances running as Policy server personas. We are running v1.1.1.268 with the latest two patches.
I was unable to pull Active Directory Group Attributes in any of my Authorization rules. After Resyncing all the boxes with the Primary Administration box I was able to do this. There is no bug listings for this occurance nor do we have Smartnet to call support for other reasons. I thought this might be useful to someone who is having the same issue and is unable to figure it out with TAC
-CC

Absolutely. All units said in-sync after setting their personas.
Here is our layout:
ISE-ADM-01 Admin-Primary, Monitoring-Secondary
ISE-ADM-02 Admin-Secondary, Monitoring-Primary
ISE-PDP-01 Policy Only
ISE-PDP-02 Policy Only
I synced one at a time starting with ADM-02. After completing the other two boxes. Active Directory Attribs were pulled down when using them in the Ext Group within my Authz rules.
-CC

NT startup parmaters for multiple weblogic servers started as a service

I have the need to start multiple weblogic servers, using NT services.
I have created a second folder with a properties file listening on another
port.
I am using the following startup parameter
-J-Dweblogic.system.name=Test
My question, this works when I type the startup parameter, is their anyway
to have this automatically entered
on server startup.
Is their a registry setting to make this permanent
Thanks

The answer is...
- Use a product to turn applications into an NT Service (e.g.
ServiceMill)
- Directly run the Weblogic Server Java class via that application
--> As many WLs on one machine as you like.
Send mail if you need specific details.
Best regards
Daniel Hoppe
-----Original Message-----
From: [email protected] (Ed) [mailto:[email protected]]
Posted At: Wednesday, August 30, 2000 2:34 AM
Posted To: install
Conversation: NT startup parmaters for multiple weblogic servers started
as a service
Subject: Re: NT startup parmaters for multiple weblogic servers started
as a service
I wish that was the case.
The problem is, while you enter the startup parameter once, it only
is good for that startup of the weblogic server,
The next time the server reboots and the services start, unless you
re-enter the startup parameter -J-Dweblogic.system.name=Foldername
The weblogic server starts using the wrong properties file.
Is their anyway using NT services to have the correct instance of WL
to start everytime.
I have checked this newsgroup and this question has been posted
before, but so far no one seems to have the answer.
I know in a production eniviorment someone must be running more that
one instance of a WL server as a service, Hopefully their is an
answer on how this is done.
Thank you
Kumar Allamraju <[email protected]> wrote:
Not that i know of.
but you are specifying this startup parameter only one time too!!!
Kumar
None of your bussines wrote:
I have the need to start multiple weblogic servers, using NT
services.
I have created a second folder with a properties file listening onanother
port.
I am using the following startup parameter
-J-Dweblogic.system.name=Test
My question, this works when I type the startup parameter, is theiranyway
to have this automatically entered
on server startup.
Is their a registry setting to make this permanent
Thanks

Starting multiple application servers

We have 4.7 system has 2 application servers as "sap1" and "sap2" installed in different Unix servers.
I would like to start "sap1" first and "sap2" next. Is there any standard script for starting multiple application servers in a sequence. We have problem, when restarting servers after weekly off-line backup. Should we go for customised Unix shell scripting?.
Thanks,
Sam

#!/bin/sh
SYSID=ABC
STARTSCRIPT="/sapmnt/$SYSID/exe/startsap"
start the Central Instance (CI)
$
start AppServers
remsh <app server> -n startsap <Instance name>
stopscript
#!/bin/sh
SYSID=ABC
Stop all app servers and the database.
stop AppServers
remsh <hostname> -n stopsap <instance name>
stop central instance
/sapmnt/$SYSID/exe/stopsap
Thanks,
Tanuj

Multiple DHCP servers Not authorized to start in domain.

Similar Messages

Maybe you are looking for