Multiple displays of connection paths

When "My Network Places" is selected The "entire network" displays multiple alias's or clones. These are numbered and can be deleted in some cases. Anyone know the cause for these multiples ?

Hey,
I am answering my own question here but upon digging in the info menu for each track some of the tracks were different in the sorting tab. The sort album listing was slightly different for a few of the tracks (omitting the word 'The') and this accounted for the album displaying as one record on iTunes but appearing as three separate entries on the iPod Nano coverflow.
Sorted

Similar Messages

Why doesn't Screen Sharing work across multiple displays anymore in Mavericks?

Hey Guys,
I'm having a problem with Screen Sharing in Mavericks. It wasn't a problem in Mountain Lion, so I'm wondering if you could help me.
I use a Mac Pro with multiple displays to connect to another Mac Pro with multiple displays. Here's how it looks at first:
Two remote desktops shown in one window on one display locally. (Note: there are two different displays connected to this Mac Pro.)
In Mountain Lion, I used to be able to scale this up across displays. When I do that now, the remote desktop scales down to the lower-left corner. Observe:
When I mouse over it, there's some screen tearing (artifacts):
Any ideas?
Notes:
Yes, I've Google'd it.
I don't have Mavericks' multi-display support enabled. I disabled it to spread out Avid Media Composer and Adobe After Effects usage.
Thank you,
Isaac T.

(bump)

How do I connect multiple displays to a Lenovo 405

how do I connect multiple displays to a Lenovo 405 running windows 7? I tried a video card but the built in amd video port would not function with the video card plugged in.
Moderator Note; subject edit, post moved to here

hi harry13,
Welcome to the Lenovo Forums.
If you're referring to the Lenovo® H405, this unit has an integrated VGA and HDMI out according to this pdf data sheet.
If you'll be using a flat panel monitor (that usualy has a VGA connector and a single link DVI D digital interface), you will need to connect 1 monitor to the VGA out and use an HDMI to single link DVI-D converter on the other monitor. You might need to scan for hardware changes under the device manager to identify the monitor that's connected to the HDMI to DVI-D converter. Note that you need to change the video setup under BIOS to IGD or the onboard graphics.
If you'll be using your discrete video adapter for the multi-monitor setup, you must change the video setup to PEG under the BIOS and the video card must have a vga or hdmi/dvi out.
Also, see these guides as a reference:
How to set up dual monitors in Windows 7
Dual monitor setup: Two monitors are better than one
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How do I unmerge connected paths in Illustrator CS5?

I was wondering if there was a way to 'unmerge' a group of connected paths. The thing is whenever I click on one of the ovals, it selects a whole group of ovals instead of just the one I selected. The problem is that I drew an oval, copied it multiple times until I made a pile out of it, then copied that pile and made other piles. So whenever I click on one of the ovals, it selects the entire pile. Is there a way I can 'unmerge' or ungroup all the paths so I can select just one of the ovals? I'm not doing this so I can copy them again, I'm trying to delete them individually but I really can't.

Right, and that's another problem I'm having. The reason why some strokes are missing is because I used the White Arrow to delete some ovals. But I'm guessing I selected just the stroke of the oval instead of the actual fill path, so it only deleted the strokes and left the fill path alone. Also, the reason why only partial strokes are deleted is because using the White Arrow only allows me to delete anchor points instead of a complete stroke.
So basically that's what it looks like. I selected a stroke using the White Arrow, but it only deleted a partial of the complete stroke. I even tried something else - selecting a stroke with the White Arrow then switching to the Black Arrow to delete it. But still, the results were the same. There's probably another odd thing you could catch from this screenshot that I just noticed as well after zooming in - for some reason, some small sections of the strokes looks like they're 'cracked' or have been cutted up somehow. I'm not sure how that happened, but it seems like that problem exists in the 'fill sections' also.
I'm not sure if you can see it, but to the right of the highlighted selection I clicked on, there exists some grey 'cracked lines' that almost looks like they've been cutted up with a knife or something. It's just like the same problem with the strokes. I'm not sure how it became like that at all. This problem only seems to exist in the [blue highlighted] group of ovals of the first screenshot I posted in this thread. All the other ovals to the right can all be individually selected, and deleted with just one click. The groups of ovals to the left for some reason are different - I have to delete them through cutted up sections of strokes and fill paths, which can practically take forever. This problem seems way too complicated for me to get.

Icon for multiple displays?

I downloaded Mavericks yesterday and am looking for the icon that allows for multiple displays. According to the overview it should be on my menu bar but nothing has shown up. Is there a setting I need to change? Or, is there another way I can connect my laptop to my TV through my Apple TV using wi-fi? Thanks!

Try System Preferences, Displays, check the box to show Mirroring in menu bar.
Is your Mac capable?
AirPlay Mirroring
Requires a second-generation Apple TV or later. Supported by the following Mac models:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
Mac Pro (late 2013)

Multiple displays, great. single display tricky in Mavericks.

I bought a new external display to work on a MacBook Air through Thunderbolt but when I close the lid of the MBA the display goes black / sleeps. I've reset the SMC and it worked until shut down, and upon restart was back to going black. I can get it to work with the MBA open and use multiple displays but this is not what I want to achieve or have the desk space for.
Does anyone else have the same issue or even have a solution?
I'd be interested to hear anything.

Dan,
for a Mid 2010 model, you’ll need to use something like the Matrox DualHead2Go Digital Mac Edition multi-display adapter with a DVI-to-HDMI adapter to connect your current display. If your current display or your second display has a DVI input port, then no additional adapter would be needed.

Satellite L500: unable to change to Multiple Display to play via TV

Having followed instructions to connect laptop to TV via HDMI there is no signal. Followed instructions in User Manual but
User Manual says go to Adjust Resolution/Advanced/GenericPnPMonitor/Graphics Properties/Display Properties then click 'Multiple Display' but there is only one drop down option 'Single Display' and 1 primary device the notebook.
When I toggle FN F5 to change display it only shows LCD display.
Is this something simple I'm missing or does this suggest a fault with the Toshiba Display Driver?
Thanks

Hi
For I using the HDMI connection I can recommend this:
Firstly connect the cable to your notebook and TV or external monitor. Then power on the TV and choose the right input channel. Finally power on the notebook and normally the HDMI connection will be recognized automatically.
If it doesnt work I would recommend updating the display driver and BIOS. Both can be founded on the Toshiba website.

Help! Multiple Displays not Working. (Mac Pro late 2013).

Hardware:
Late 2013 Mac Pro
Processor: 3.7 GHz Quad Core Intel Xeon E5
Memory: 12 GB 1867 MHz DDR ECC
Graphics: AMD FirePro D300 2048 M8
Software: OS X 10.9.2 (13C64)
Displays:
4 LG Electronics S-Class 25UM64-S 25-Inch Screen LED-Lit Monitor's
Display Connection:
6 Moshi Mini DisplayPort to HDMI Adapter (4K)
Issue:
First of all, thank you in advance for taking the time to help!
I just picked up this Mac Pro (as stated above) and I am having quite the time trying to get the monitors to display properly (or at all!)!
Everything is hooked up properly (i'd like to think so), i've run through most of the trouble shooting methods I can think of and have found online... and still, 2 of the 4 displays do not show! The Mac Pro is not recognizing two of them.
I was told that the MacPro could recognize up to 6 Mini DisplayPort to HDMI monitors, however, only 2 are working properly. Is it because of the Moshi Mini DisplayPort to HDMI adapters? Should I be running MDP to DP cables instead? The monitors support DisplayPort input's, however, they also allow for PIP hence the use of 6 MDP adapters to HDMI. (2 of the monitors are using the built in picture in picture split screen. So 2 HDMI inputs each).
Really pulling my hair on this one.. I figured it would be plug and play.. at least, that's how apple USED to be.
Any ideas?! Am I simply needing to use the MDP to DP cables instead of MDP to HDMI? Please help!
Thank you!

See:
Mac Pro (Late 2013): Using multiple displays - Apple Support
Can I connect more than 2 DVI or HDMI displays?
Mac Pro supports a total of two DVI or HDMI displays when connected via the built-in HDMI port or using the Apple Mini DisplayPort to DVI adapter. To connect additional DVI displays, use an active DVI adaptersuch as the Apple Mini DisplayPort to Dual-Link DVI adapter. You can connect up to six active adapter DVI displays. This requires a powered USB hub since Mac Pro offers four USB ports and you will need six to connect them all.
Thus, use a display port to mini display port cable

Can I Use The Multiple Display Feature?

Can I Use The Multiple Display Feature With My "Early 2011" Macbook Pro? Or Does it HAVE to me "Mid 2011"?

bs212 wrote:
No not the Mirroring, the new display feature where you can have a display on your tv doing one thing (like a slide show) and you can use your computer for something els. The multi screen feature .
You could always do that as long as you could connect all the displays.
What you are now describing is Airplay where the data is streamed to the AppleTV. The connection no longer has to be a physical cable.

Multiple display won't work

I have connected two different monitors to my late 2009 IMAC. The multiple display works fine but when I shutdown the computer the secondary monitor won't wake up unless I unlug the video cord and plug it in again. Any solutions?

Hi Michael, thanks for your reply.
Regarding the GPU failure, I had my doubts about this simply because the external display at any resolution and 'screen share' are fine and that would seem to imply the GPU itself is fine.
I don't have an answer and I suspect it's going to require a new logic board, but from what I know that is an expensive fix and that would be unaffordable meaning the MBP will effectively become a MacMini which I'd really like to avoid.
Is there anything else I can try?
Simeon

T530 multiple display configuration lead to errors when closing the laptop

Hello,
I have a Lenovo T530 2429CTT and I am having some trouble when trying to set up my multiple display configuration with a Lenovo ThinkPad Mini Dock Plus Series 3.
I have an external Samsung LCD monitor which is connected to the Mini Dock via DisplayPort.
I am running Win 7 Prof.
The problem I see is with an application which uses DirectX. The display looks fine in the following configuration:
- Laptop open
- External Samsung LCD Monitor on
- Display cloned so that both devices show my desktop
The issues appear when I close the laptop. I do this because in my office I only work with the external monitor so I don't need the internal display of the laptop at that moment.
When I close the laptop the following happens:
The external display gets dark for some seconds. It comes up again, gets dark and after a while (maybe 10 sec) it stays active. Sometimes I see a notification that the color scheme has changed to Win 7 basic.
Everything seems to be fine now but when looking at the DirectX based display of my application I have some problems for example with the refresh (the display looks very weird).
BTW: The laptop has an internal and an external graphic card (Internal: Intel HD 4000, External: NVIDIA NVS 5400M).
So it seems as when the laptop gets closed, the internal graphics will be turned off. Due to this the display on the external monitor also changes the settings of the graphhic card (maybe it gets turned in an energy saver state).
I was looking at many of the NVIDIA settings without any success so hopefully somebody in this forum has an idea what is happening there.
Thanks,
Andreas

Hi,
I'm trying to buy the exact same configuration.
although i cannot find this 2429CTT on lenovo site anywhere, is available for selling on a known european supplier.
and my propose is to have 2 Monitors connected, so I'll follow this inquire very closely and hold my order until then.
do you have any update on it?
just by curiosity, what about the rest? how does the PC feels to you? everything else is working?
thanks

T530 multiple display configuration

I have the T530 with the NVIDIA Optimus option that should allow a triple display configuration (two external displays and the laptop LCD).
I have been able to get a working configuration with the laptop LCD and two external displays over DisplayPort through the docking station.
I have found that upon some boot cycles, I am either stuck with just the laptop LCD as the only display or I am able to turn on only one external display. Sometimes a reboot will change it, sometimes it will not.
What's strange is that the NVIDIA control panel and the Windows display settings show all three LCDs, I am just not able to turn on one or both of the external displays (even if I turn off the laptop LCD).
Has anyone found a solution to this problem?
Thank you!
Solved!
Go to Solution.

Hi, admarsha
There are updates available for both your BIOS and Optimus that may help this issue. The BIOS update can be found here and the Optimus update can be found here. Looking over the ReadMe for the Nvidia update, part of the update does help with issues connected to multiple displays through docking stations so it may help.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Is it possible to use multiple displays on mac mini?

Is it possible to use multiple displays on mac mini?
I have a mac mini that I think is from 2009. The processor is 2.26 GHz Intel Core 2 Duo and 2 gb memory that I´d like to use with multiple displays (2). Is this possible??

Baddoll wrote:
Is this possible??
yes.
connect monitor #1 with the Mini DVI to DVI adapter (should have come with your Mini)
connect monitor #2 with the mini-displayport to DVI adapter (needs to be procured separately)

OS X Lion loses multiple display settings - VERY annoying

Hi guys,
I have two 27" Cinemadisplays connected to a 2011 Mac Mini running OS X Lion 10.7.2.
One display is connected through Thunderbolt to the back of the Mac Mini (this is the display right in front of me) and another display is chained to the first displayed, through Thunderbolt again (this other display is at a slight angle sitting to my right hand side). I have multiple desktops and usually put various programs on different desktops on different monitors.
A lot of the times when I shut down OS X Lion and for instance, next day, start OS X again, the login screen appears on the second monitor (sitting to my right side) and from that point on after log in, all my programs get messed up and get displayed on the second monitor instead of how I left them when I shut down the computer. So every time I boot up, I have to go through the whole process of setting up all my workspaces and desktops and apps again on multiple monitors just to lose those settings next time I boot the computer up. It's SUPER annoying.
I have seen similar issues posted by different people online but no official answer has been provided. So in a nutshell, OS X Lion loses the settings of which montior is my primary monitor upon restart/shutdown. Any solutions on how to fix this issue? You would think lovely folks at Apple should have already tested Lion on multiple Cinemadisplays through Thunderbolt but it turns out they haven't :-(
Regards and thanks in advance for any suggestions

UPDATE: I installed and ran the freeware OnyX utility and my situation is (so far) looking better.
Actions that I took were
Verify and Repair disk permissions (which I had done many times before so don't think that was it)
Executed the Daily, Weekly, and Monthly mac maintenance scripts (I shutdown my mac after every use so it had been several months since the "monthly" script was run); I'm thinking this had something to with fixing things - now that I know about this, I'll plan to check more frequently.
Rebuild Launch Services and dyld's shared cache (thought it couldn't hurt)
Deleted the pre-selected cache items under System and User Cache (same as above)
Deleted the pre-selected log files (just to free up space)
I have done several reboots and the monitor settings are still looking good PLUS the machine is booting and shutting down much faster. Time will tell, but I think this may have nailed it.

Analysis Authorization based on Hier node with multiple display hierarchies

Hi guys - I've got a problem where s.o. might have an idea of how to switch on the light at the end of the tunnel, I am currently standing in:
Requirement:
Cost Center Authorization should be given through RSECADMIN, reporting should be possible for any hierarchy that exists for the authorization relevant info object.
Preferred solution:
The Cost Center Analysis Authorization should be given through RSECADMIN - Hierarchy node assignment.
u2022     A dedicated Authorization Cost Center Hierarchy will be maintained in ECC6 as an alternative cost center hierarchy and extracted into BW.
u2022     The RSECADMIN Hierarchy node assignment should be based on a particular node (Type 2).
u2022     The display level will be specified as required (here: Level 7)
u2022     The Authorization granted should be independent of hierarchy name and version (validity 3).
Reporting Scenario and technical impact:
As mentioned above, when designing and running a query the user should be able to freely select other (i.e. than the authorization) display hierarchies for the authorization relevant reporting object 'Cost Center' as well. The technical names of the semantically relevant hierarchy nodes could therefore vary. E.g. cost centers 1, 2 and 3, being assigned under hierarchy node u2018Au2019 of the RSECADMIN relevant authorization hierarchy, could be subsumed by hierarchy node u2018Bu2019 in another display hierarchy, which the user may want to display in accordance to his reporting needs. Ideally, the alternative display hierarchy should therefore display node u2018Bu2019.
My findings so far (based on prototyping) turn out that this is not possible as long u2018Bu2019 (and its hierarchy) is not authorized in RSECADMIN. Can these findings be confirmed? And if not, would anyone have an idea of how to facilitate the reporting scenario?
Would there be any other way to grant access, possibly based on RSECADMIN single values, and also enable the user to flexibly display hierarchies with only those hierarchy nodes whose single cost center values the user has been given access to?
Thanks everyone for your input...
Claus
Edited by: Claus64 on Jul 13, 2009 4:10 AM

HI CLause,
On Jul 14 2009, you wrote in SDN and said:
FYI: Found a solution...
The hierarchy analysis authorization will be based on a navigational attribute of cost center.
With analysis authorizations it is possible to declare the Auth object (e.g. 0COSTCENTER__RACCAUT0) as authorization relevant and leave the superior object 0COSTCENTER auth irrelevant.
The auth will be given for 0COSTCENTER__RACCAUT0. This object will be placed as a filter of the query, being restricted by an Authorization variable for hierarchy nodes.
Due to the concept of Analysis Authorizations, this variable will automatically pick up the nodes granted as part of RSECADMIN Hierarchy based Authorization.
As mentioned above, 0COSTCENTER as the regular reporting characteristic remains auth irrelevant and can therefore take any hierarchy thatu2019s available. Reporting on single values will be possible, too. Only those nodes show up that hold the authorized cost centers in accordance to the authorization.
If the auth relevant 0COSTCENTER__RACCAUT0 is not used in the query definition by either not taking it in as a filter or skipping the Auth variable, the query will launch the message that the authorization is missing. No data show up at all.
Claus
See this thread:
Analysis Authorization based on Hier node with multiple display hierarchies
I am also in the same situation as you and need to understadn your solution. I understand that you created a Nav Attr on 0COSTCENTER and made this auth relevant whilst ensuring that 0COSTCENTER is NOT auth relevant. This is all fine. The issue was you have multiple hierachies for 0COSTCENTER, how did the new Nav Attr help you solve your issue. When loading 0COSTCENTER what values did you load ino the new Nav Attribute and how did that link to the hierachies? Also, in RSECADMIN you created hiearchy nodes based on the Nav Attribute but I am confused as to what values you have in the Nav Attr.
I appreciate if you can share your solution from the past in more details.
many thanks

Multiple displays of connection paths

Similar Messages

Maybe you are looking for