Multiple Displays Problem - 3rd display shows pointer arrow only

I have a Mac Pro with two Nvidia GeForce GT120 video cards driving three displays.  After the upgrade to OS X 10.8, the third display is recognized by the system, but does not show the desktop or any windows... only the pointer arrow is displayed - but the arrow is displayed properly, is mapped properly across all three display spaces, and the system still allows windows to be open (but invisible) on the 3rd display.  Is this a general bug or perhaps unique to my configuration?

Mountain Lion Bug: 10.8.0 and 10.8.1
MacPro 4,1 + Dual NVIDIA GeForce GT 120
30" Apple LCD + 23" Apple LCD (rotated 270°)
When computer boots, the rotated display is black; although mouse pointer shows fine. If I physically hot-swap both DVI connectors, one on each card, everything works perfectly until I reboot.
Then after shutdown for the day, reboot the next morning, I have to swap the connections again. Then it works fine.
Come on Apple, there is a serious problem here that was brought-up since 10.8 FC and was ignored in 10.8.1.

Similar Messages

  • Multiple locales problem ---labels display incorrectly

    Hi, we get a problem as we try to get the internationalization support for our helpset. The Labels, for example, can not be correctly displayed if we change the language option in Internet Explorer from english to Italian. "Switch Books" would always be displayed as german language , also "index", "content"... But if we check cabo/images/cache directory, we can only find an "en" subdirectory, nothing else.
    Is it necessary to configure some files to get this support? or its automaticlly supported? by the way we have included the ohw-2.0.1.0.jar file in WEB-INF/lib

    It should be automatically supported. Some questions/comments:
    1. Do you have a german locale helpset that matches the locale used by the browser? OHW will only change the UI if it can find a matching helpset. This is to ensure the helpset and UI are in the same language.
    2. Second, you can force OHW to use a particular locale (with the condition above) by adding locale=en_US (or some other IANA code) as another request paramter. You can try this to make sure your browser settings were not incorrect the last time you tried.

  • [X300 intel external display] Problem to display correctly 1600x1200px on external screen

    Hello everyone,
    I have a problem with my external display on my X300 laptop...
    I have a X300 with WinXP, and a 20" 4/3 1600x1200 external display (Samsung 204B).
    When I want to use my external display as an extended desktop, it didn't work well... First I configure my display as an extended ... into 1600x1200px resolution. As the ratio isn't 4/3 on the laptop, there is some border at the top and at the bottom of the external screen, consequenly there is an "lift" (when I go down the screen move down.. etc.). It's not very ..cool.
    So there is an option into the graphic proprety to set the screen in "full screen : not keeping the proportions". But, in this case, my external screen display an ... triky ? There is still an "lift", but there is also two border on the right and the left of the screen, and the image quality isn't there. It's too deformed to can be read.
    After some research it appear that my lenovo drivers do not match with the last intel one... But when I try to install the lenovo one ... It didn't work ! (hardware problem).
    How can I get a working extended desktop into 1440x900 + 1600x1200 full screen !
    Thanks for all, and sorry for my poor English...

    i have the same problem with X200 and the X200 ultrabay Docking station.
    No idea yet ...

  • Display problem in iphone 5s

    My apple iphone 5s is making display problem ( blank display only). for this reason we contact apple service store INSYS coimbatore,Tamilnadu,India, but there is no proper response and doesnot take any steps to rectify this problem. i felt very bad to brought this prodect and also the statement of replacement warranty is not truested one. At the time of selling this product,they talked like very sopported peaple(Reliance fun mall coimbatore). In this case just i bought on 01-jan-2014 only.within this sort period getting this kind of problem making us feels like this product is like no quality at all.

    Hello there, Ankit1985.
    The following Knowledge Base article provides some great steps for troubleshooting your issue:
    iPhone: Troubleshooting No SIM
    http://support.apple.com/kb/ts4148
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Browser display problem in firefox

    After reinstall Vibe 3.3 to new server. Browser display problem in firefox. Last column only display half in the table. But IE is display fine. Any suggestion?

    Originally Posted by yuenc
    Sorry that, our company no planning on upgrade.
    And they said no problem before move to new server.
    Then you could try the workaround mentioned in comment 6: https://bugzilla.novell.com/show_bug.cgi?id=786587#c6
    According to the bug report it was found in 3.3, so either they had this problem before or they used an older version firefox than 16 prior to the server migration.
    Thomas

  • A few days ago my TV show and movie displays went whacky-the shows are no longer in alpha order, there are multiple listings of the same show, the pictures are random-including album covers.  I downloaded latest version.  Any ideas??

    A few days ago my TV show and movie displays went whacky-the shows are no longer in alpha order, there are multiple listings of the same show, the pictures are random-including album covers.  I downloaded latest version & no change.  Any ideas??

    ME TOO.
    I think mine are all still in alphabetical order, but :
    * movies I deleted from my library and told "hide this purchase in the cloud" are showing up again. If I try to play them, I get the "cannot find the file in its proper location, would you like to locate it" error message.
    * for movies that have "iTunes Extras," the extras show up as a separate item, with another copy of the movie artwork. Most of these I believe I had DELETED the "iTunes Extras" anyway.
    * Items are showing up multiple times.
    * A few MUSIC ALBUMS are listed in my Movies section.
    * Some movies (I believe ones that I deleted off my HD but are still in the cloud) are showing random album covers instead of their proper artwork.
    * Just rented a movie, and it didn't show up anywhere in my library. It downloaded properly and completely, was in a suitably labeled folder in my iTunes/Media/Movies section, but didn't show up in any section of the library (or via a library search). Had to manually find it and tell it to open the file using iTunes.
    Running the latest version, even checked for updates. No other changes made lately since the last round of apple software updates. This was wonky before the latest small update to iTunes - now it's even wonkier. And it is very, VERY effing annoying.

  • Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

    Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • HP g049au downgraded to windows 7 32 bit showing atikmdag.sys display problem

    HP g049au downgraded to windows 7 32 bit showing atikmdag.sys display problem. 
    Downgraded according to HP support instructions found here- http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/hp-15-g049au-K5B45PA-driver-for...
    Crash dump analysis-
    On Mon 10/20/2014 5:20:39 PM GMT your computer crashed
    crash dump file: C:\Windows\Minidump\102014-17222-01.dmp
    uptime: 01:20:20
    This was probably caused by the following module: atikmdag.sys (atikmdag+0x1CEB1)
    Bugcheck code: 0xA0000001 (0x5, 0x0, 0x0, 0x0)
    Error: CUSTOM_ERROR
    file path: C:\Windows\system32\drivers\atikmdag.sys
    product: ATI Radeon Family
    company: Advanced Micro Devices, Inc.
    description: ATI Radeon Kernel Mode Driver
    A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, Advanced Micro Devices, Inc.).
    Google query: Advanced Micro Devices, Inc. CUSTOM_ERROR

    Hello @HPpowerUser,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how you have downgraded your system from Windows 8 (64-bit) to Windows 7 (32-bit), and that your system is displaying a atikmdag.sys. I would be happy to assist you in this matter!
    According to the available drivers and software for your computer, Windows 7 is only supported for the (64-bit) version of Operating System. To maintain a compatible set of drivers on your system, I recommend downgrading to a 64-bit version of Windows 7.
    I hope this helps!
    Best Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Using apple iphone 5, i observe today that display shows yellow border when i choose option in setting as erase all content and setting, iphone goes in to starting mode, i want to know is there any problem to display, plz give me feed back urgently

    using apple iphone 5, i observe today that display shows yellow border when i choose option in setting as erase all content and setting, iphone goes in to starting mode, i want to know is there any problem to display, plz give me feed back urgently

    I had this same thing happen to me.  I was using my brand new iphone 5 (texting and listening to music through the speakers) when it flashed the apple logo, stopped my music and brought me to the lock screen. 

  • External display problems with snow leopard

    I just upgraded from Leopard to Snow Leopard on my Macbook and it's created lots of problems with my LCD external display:
    - The display won't work at its native resolution (1680x1050) - it will flash up an image for 1/10 of second and then go black. I can only get it to work at a lower resolution, which looks AWFUL.
    - If I try to start up my Macbook with the lid closed and the display connected, the display won't work at all (it jams on the start up screen). It only works if I keep both of them running
    I never had these problems when using Leopard. I've searched lots of forums and found that many people are having similar problems with external displays. Apple still haven't fixed the bug after repeated efforts from people to get if fixed.
    Here are some threads (now closed) on this if you're looking for solutions:
    http://discussions.apple.com/thread.jspa?threadID=2132912&tstart=0
    http://discussions.apple.com/thread.jspa?threadID=2136455&tstart=1
    http://discussions.apple.com/thread.jspa?threadID=2132837&tstart=0
    http://discussions.apple.com/thread.jspa?messageID=10084332
    Common suggested fixes are:
    - Force OS X to use LCD font smoothing (does not work for me)
    - Clear the PRAM on start-up (does not work for me)
    - Delete /Library/Preferences/com.apple.windowserver.plist (does not work)
    - Change energy management setting to high performance (only works on graphics cards in Macbook 15" and 17").
    From reading these forums it appears that this is a well-know bug. Has anyone else got any suggestions to fix this? And why hasn't Apple fixed this yet after so many people bringing it to their attention? It's clearly a bug that wasn't in Leopard.

    I'M FED UP WITH APPLE! They've always been a little shady, but the last half of 2010 took the cake!
    First it was the iPhone 3g "upgrade" to IOS4 which was garbage and killed my ability to use the 3g until I figured out how to crack the software, wipe the thing clear then reinstall the original software. Next up was purchasing the iphone 4 as a Christmas gift for someone running tiger on their mac, only to find out that the iphone 4 doesn't work on tiger when they tried to sync their contacts - and then having to rush out and purchase snow leopard so that they could enjoy my gift. Then I install Snow Leopard (note - I purchased the family pack) onto my own leopard-running(10.5.+) powerbook only to have the external LCD display I've been using for years suddenly stop working.
    Oh, okay, to be fair, it works IF I RESIGN MYSELF TO SET it to "mirror image" (which defeats the purpose of having multiple displays) and drop the resolution down to a pathetic, unsharp, nearly distored setting that is almost painful to look at knowing that this monitor was just A COUPLE OF DAYS AGO showing me crystal clear images.
    Then I exhaust myself trying to find a fix only to discover that APPLE in their infinite brilliance (AKA - their torture of loyal customers) knows of the issue - worked it out - then created an update that created the issue all over again. I'm so done! No more macs. I'm going back to the evil land of PCs. At least there, you know you're getting crap, it doesn't sneak up on you after getting you to trust it time and time again.

  • Ideacentre B320 display problem

    I'm suffering from a display problem, and cannot figure if it's a software or hardware issue... I'm on Win7 64bit. Here are the symptoms:
    1) For a while now, intermittently the screen would go grey (or some sort of a messed up pattern of rgb pixels) and I would have to power down forcefully. The frequency of this has gone up very much in the recent weeks
    2) When the machine freezes, I can still hear the music playing, and Windows continues to do whatever it was doing before
    3) Recently (I'm guessing after a Windows update), I wasn't able to boot into normal mode anymore. It would show the Windows splash screen, then before the login screen appears it would just go black and freeze. Leaving it for a long time doesn't lead to recovery
    4) To try and fix this, I've updated the ATI driver to the latest version, which didn't work so progressively tried every version between the11.6 and 10.3 (4?) which was the default when the machine was purchased. No luck there. I've also flashed the bios and that didn't help either
    5) I can boot into safe mode, so I disabled amdkmdap using sysinternal's autoruns.exe, which meant that I can boot into normal mode, but it woud fall back onto Windows' vga driver (1400x1050 only!)
    6) Now, even in the low res mode, almost daily the grey screen freezing would happen and I would have to reboot. Tapping the power button allows the shutdown dialog to come up (I'm guessing), and pressing enter would shut down the machine then.
    There's an awful lot of posts on the internet regarding people having issues with ATI HD6450 and similar category cards, some of which sound similar to my case. They too experienced the freezing problem and reverting or upgrading the drivers had no effect (many even reinstalled windows completely). It sounds like though, the problem is software in origin at a guess.
    On the other hand, the machine is now 3-4 years old and I could imagine that the GPU or graphics memory might have suffered wear and tear -- emailing Lenovo support took a week to get a response, the only thing they asked was whether my warranty is still active (after that it's been a complete silence) are they usually this terrible?
    The last thing is, when the problem first occurred I booted using a linux live CD and it was all fine, at full resolution graphics. I haven't repeated this experiment since it takes quite a while to boot from a CD... but suggested that the hardware is intact. In fact, by messing about with the drivers I was able to boot into Windows normal mode and operate for 1-2 days, after which the grey freeze happened again. I haven't been able to get back into that since.
    Here is my question: Is there a way to find out whether it's software or hardware that's at fault? If it turns out to be hardware, what are my options at replacements? The GPU is soldered onto the motherboard, so do I have to replace the whole thing? If it's a software issue, would restoring to factory default state fix this issue, given that an unknown update could cause the same issue at any time... This is the last time I will buy an AIO without removable everything. 

    Welcome to the Lenovo Community !
    Probably a good test of the hardware is use the Linux Live CD that you used earlier.   If the graphics are still good when using the Live CD then your monitor and GPU are fine. 
    If the hardware checks out Ok then I suspect you have a driver problem.  Try using a driver cleaner to fully uninstall the ATI driver since bit and pieces left over from previous driver installs can cause problems.  The link below is for a free and highly recommended utility for cleaning the system of the graphic drivers.  After the clean up I would try installing the original driver that came with your system.
    http://www.guru3d.com/content-page/guru3d-driver-sweeper.html
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • Problem in Displaying text Variable

    Hi All,
    I have problem in Displaying text Variable in the column header.
    My requirement is as follows.
    Column Level:
    0Calmonth/Year
    Key figures
    Keyfigure1 - Current Month  - Text Variable1
    Keyfigure2 - Previous Month - Text Variable2
    Keyfigure3 - Previous Month - Same as Text Variable2 - Display same month
    So based on each 0Calmonth/year these three keygirues should display in Header section like.
    Selection screen
    0Calmonth/Year - 03.2005 - 06.2005
    Result should be for each month.
    0Calmonth/Year
    03.2005                                04.2005                              05.2005
    03.2005 | 02.2005 | 02.20005  04.2005 | 03.2005 | 03.2005 05.2005 | 04.2005 | 04.2005.
    I have created two text variable with Customer exit.But not able to show exact months in the header section.
    For first three columns months are coming exactly, but from fourth columns it should display next month, but it is not coming.
    I have tried to code, but not successfull.
    Please help me how to go about this.
    Will assign full points.
    Regards,
    Vijay

    hi
    Check here........
    Re: Customer Exist for "From Current Date To Month End"
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
    Cal month
    it might helpful for you
    assign points if helpful

  • Display problem after RAM Upgrade to MS6712

    Hi there,
    after a RAM upgrade (512mb to 3GB) my PC has developed a display problem. The graphics are slow / rippled and video playback is very poor. In device manager no "display adapters" are present and there is also an error mesage referring to the VIA CPU to AGP2/AGP3.0 controller not having enough free resources to run due to a conflisct with VGAsave? I've downloaded the latest VIA chipset drivers to no effect?
    System info: MS6712 MB, AMD Athlon 1.25GHZ, XP SP3.0

    OK, here's the info on my PSU;
    It's a Powerman FSP250-60GTU(PF). Input: 230V - 5A, 50Hz. Max Output: 250W
    While I had the case open I took out 2 of the RAM modules and without making any other changes everything appeared to work fine with just the 1GB, so I tried putting 1 more back in to take it to 2GB and again all seems fine? Does this indeed point to my PSU then? If so and it works fine with 2GB should I be thankfull for a 512mb to 2GB upgrade and send the 3rd module back to Crucial??
    Before I posted this thread I did run a memtest from Memtest86+ with all three modules installed and it came up with NO problems?
    Re Henry's post, I searched using the format of the part no on the RAM modules themselves i.e. M368L2923FLN-CB3 and it took me here:
    http://www.samsung.com/global/business/semiconductor/productListNonflexTable.do?fmly_id=118&sht_id=1
    Other info on printed the modules themselves: 1GB DDR PC2700 CL2.5
    According to Everest my CPU temp (with 2GB installed) is: 43 degrees (MOBO 30 degrees and HD 42 degrees) - do these seem normal?

  • Problem in display file in java applet embeded browser

    hi, i am facing problem to display the file from local drive in java applet embeded browser. here is the error message i get:
    Exception loading file from path:java.security.AccessControlException: access denied (java.util.PropertyPermission user.dir read)
    i think it should be the java security problem and i have try to get the solution from internet. i try to solve by using the fllowing method:
    keytool -genkey -keyalg rsa -alias yourkey
    keytool -export -alias yourkey -file yourcert.crt
    javac yourapplet.java
    jar cvf yourapplet.jar yourapplet.class
    jarsigner yourapplet.jar yourkey
    but the command prompt ask me to enter the keystore password. i try to enter any password. but i show me the error:
    keytool error: java.io.IOException: Keystore was tampered with, or password was incorrect.
    So may i know what is the problem actually?Thanks a lot.

    Hi,
    here is the sample coding :
    import java.applet.Applet;
    import java.awt.*;
    import java.awt.event.*;
    import com.sun.j3d.utils.geometry.ColorCube;
    import com.sun.j3d.utils.applet.MainFrame;
    import com.sun.j3d.utils.universe.*;
    import com.sun.j3d.utils.behaviors.mouse.MouseRotate;
    import com.sun.j3d.utils.behaviors.mouse.MouseZoom;
    import com.sun.j3d.utils.behaviors.mouse.MouseTranslate;
    import javax.media.j3d.*;
    import javax.vecmath.*;
    import java.net.URL;
    import java.net.MalformedURLException;
    import org.web3d.j3d.loaders.VRML97Loader;
    import com.sun.j3d.loaders.Scene;
    public class SimpleVrml extends Applet implements ActionListener {
    String           location;
    String           initLocation;
    Canvas3D     canvas;
    SimpleUniverse     universe;
    TransformGroup     vpTransGroup;
    VRML97Loader     loader;
    View          view;
    Panel          panel;
    Label          label;
    BranchGroup     sceneRoot;
    TransformGroup     examineGroup;
    BranchGroup     sceneGroup;
    BoundingSphere     sceneBounds;
    DirectionalLight     headLight;
    AmbientLight     ambLight;
    TextField      textField;
    Cursor          waitCursor;
    Cursor          handCursor;
    public SimpleVrml() {
    initLocation="cylinder.wrl";     
         setLayout(new BorderLayout());
         GraphicsConfiguration config =SimpleUniverse.getPreferredConfiguration();     
         setLayout(new BorderLayout());
         canvas = new Canvas3D(config);
         add("Center",canvas);
         panel = new Panel();
         panel.setLayout(new FlowLayout(FlowLayout.LEFT));
         textField = new TextField(initLocation,60);     
         textField.addActionListener(this);
         label = new Label("Location:");
         panel.add(label);
         panel.add(textField);
         add("North",panel);
         waitCursor = new Cursor(Cursor.WAIT_CURSOR);
         handCursor = new Cursor(Cursor.HAND_CURSOR);
         universe = new SimpleUniverse(canvas);
         ViewingPlatform viewingPlatform = universe.getViewingPlatform();
         vpTransGroup = viewingPlatform.getViewPlatformTransform();
         Viewer viewer = universe.getViewer();
         view = viewer.getView();
         setupBehavior();
         loader = new VRML97Loader();
         gotoLocation(initLocation);
    public void actionPerformed(ActionEvent ae) {
         gotoLocation(textField.getText());
    void gotoLocation(String location) {
         canvas.setCursor(waitCursor);
         if (sceneGroup != null) {
         sceneGroup.detach();
         Scene scene = null;
         try {
         URL loadUrl = new URL(location);
         try {
              // load the scene
              scene = loader.load(new URL(location));
         } catch (Exception e) {
              System.out.println("Exception loading URL:" + e);
         } catch (MalformedURLException badUrl) {
         // location may be a path name     
         try {
              // load the scene
              scene = loader.load(location);
         } catch (Exception e) {
              System.out.println("Exception loading file from path:" + e);
         if (scene != null) {
         // get the scene group
         sceneGroup = scene.getSceneGroup();
         sceneGroup.setCapability(BranchGroup.ALLOW_DETACH);
         sceneGroup.setCapability(BranchGroup.ALLOW_BOUNDS_READ);
         // add the scene group to the scene
         examineGroup.addChild(sceneGroup);
         // now that the scene group is "live" we can inquire the bounds
         sceneBounds = (BoundingSphere)sceneGroup.getBounds();
         // set up a viewpoint to include the bounds
         setViewpoint();
         canvas.setCursor(handCursor);
    void setViewpoint() {
         Transform3D viewTrans = new Transform3D();
         Transform3D eyeTrans = new Transform3D();
         // point the view at the center of the object
         Point3d center = new Point3d();
         sceneBounds.getCenter(center);
         double radius = sceneBounds.getRadius();
         Vector3d temp = new Vector3d(center);
         viewTrans.set(temp);
         // pull the eye back far enough to see the whole object
         double eyeDist = 1.4*radius / Math.tan(view.getFieldOfView() / 2.0);
         temp.x = 0.0;
         temp.y = 0.0;
         temp.z = eyeDist;
         eyeTrans.set(temp);
         viewTrans.mul(eyeTrans);
         // set the view transform
         vpTransGroup.setTransform(viewTrans);
    private void setupBehavior() {
         sceneRoot = new BranchGroup();
         examineGroup = new TransformGroup();
         examineGroup.setCapability(TransformGroup.ALLOW_CHILDREN_EXTEND);
         examineGroup.setCapability(TransformGroup.ALLOW_CHILDREN_READ);
         examineGroup.setCapability(TransformGroup.ALLOW_CHILDREN_WRITE);
         examineGroup.setCapability(TransformGroup.ALLOW_TRANSFORM_READ);
         examineGroup.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE);
         sceneRoot.addChild(examineGroup);
         BoundingSphere behaviorBounds = new BoundingSphere(new Point3d(),
              Double.MAX_VALUE);
         MouseRotate mr = new MouseRotate();
         mr.setTransformGroup(examineGroup);
         mr.setSchedulingBounds(behaviorBounds);
         sceneRoot.addChild(mr);
         MouseTranslate mt = new MouseTranslate();
         mt.setTransformGroup(examineGroup);
         mt.setSchedulingBounds(behaviorBounds);
         sceneRoot.addChild(mt);
         MouseZoom mz = new MouseZoom();
         mz.setTransformGroup(examineGroup);
         mz.setSchedulingBounds(behaviorBounds);
         sceneRoot.addChild(mz);
         BoundingSphere lightBounds =
         new BoundingSphere(new Point3d(), Double.MAX_VALUE);
    ambLight = new AmbientLight(true, new Color3f(1.0f, 1.0f, 1.0f));
    ambLight.setInfluencingBounds(lightBounds);
    ambLight.setCapability(Light.ALLOW_STATE_WRITE);
    sceneRoot.addChild(ambLight);
    headLight = new DirectionalLight();
    headLight.setCapability(Light.ALLOW_STATE_WRITE);
    headLight.setInfluencingBounds(lightBounds);
    sceneRoot.addChild(headLight);
         universe.addBranchGraph(sceneRoot);
    public static void main(String[] args) {
    new MainFrame(new SimpleVrml(), 780, 780);
    cylinder.wrl :
    #VRML V2.0 utf8
    # A cylinder
    Shape {
    appearance Appearance {
    material Material { }
    geometry Cylinder {
    height 2.0
    radius 1.5
    view.html:
    <html>
    <applet code="SimpleVrml.class" width=600 height=600>
    </applet>
    </html>
    error msg that i get :
    Exception loading file from path:java.security.AccessControlException: access denied (java.util.PropertyPermission user.dir read)
    i can display the wrl file in applet itself but i can't display in the browser.is it any problem with my code?Urgent, please help me. Thanks.

  • LINE DISPLAY PROBLEMS

    LINE PROBLEMS - Using photoshop elements 10. Windows 7 - 64 bit.  I am having problems with "line" displaying correctly after I draw them.  The line tool is working correctly, it's the display on the screen that is not.  When I draw multiple lines in an open project some of them seem to disappear on the screen.  If I print they DO print but I cannot see them all to correctly complete my project. This happens when I use the grid and when I don't.  It happens when I do the lines all on different layer or a single layer. It happens If I duplicate layers and if I just manually draw lines on new layers.  The lines will appear and disappear randomly if I zoom in and out...  It is not always the same lines, not always in the same place and no other consitencies in this. They don't even show correctly in the print preview pane.... My moniter is working fine and I have no display problems in any other programs.  Any ideas what is causing this? This problem does not seem to happen with any other shape just line.  Also happens when I creat a line "brush" and use it. 

    Yes, I just double checked all my drivers now and they were already up to date...... This has me puzzled!

Maybe you are looking for