Multiple doc type setting for service PR generated from Maintenance order

Hi Gurus,
My client has multiple company code and has different document type for PR and PO as per the company code. For generating the  service PR  from maintenance order system take the document type of PR defined in the config.
Is it possible to define multiple document type for service PR depend on the company code/ Plant level?
Kindly help.
Regards
DP

Hi Ravi,
I used the User Exit COZF0001 .  Since we can assign only one PR doc type in the config .
I have assigned one PR doc type in configuration which will work for a company code and all their respective plant. So in this case user exit wont do any job for changing the doc type.
You will defined a condition in the User exit saying that if  company code /plant which you get it from maintenance order is not same (Config )  then provide the  PR doc type which you want to create for respect plant or company code.
I dont have coding right now with me. You need a small coding to be done to create the separate PR doc type in EBAN-BSART
with respect to plant . Check in your configuration at what point of time you are creating the PR either in saving or release of MO. You can take the even to activate the User exit.
Consult your ABAPer  they can do in 10 min.
DP

Similar Messages

  • Service PR generated through maintenance order

    Hi Friends,
    I am creating a maintenance order in which i am using external services(Control key PM03).
    The PR is getting generated, but delivery date in the PR is not editable or modifiable its greyed out.
    How to make the field editable.
    please advise
    Thanks in advance
    Vivek
    Edited by: vivek mankad on Jan 27, 2009 5:05 AM

    Hi Friends,
    We have solved the problem using the user Exit. If you want to change the delivery date in the PR generated through maintenance only option is through user exit. Even if you use user exit the field will not be modifiable. What we did was we created a new field where we maintain the delivery date and used the user exit COZF0001 to pick the date from the field. Now whatever date is entered in that field will be displayed in the PR.
    Thanks a lot guys.
    Vivek

  • Deletion of Reservation item generated from Maintenance Order

    We have a peculiar problem.
    In Production system, weu2019ve close Maintenance Order that has a component reservation. When closing the Maintenance Order, the reservation has been set deletion flag but two components are not being marked for deletion.
    We only have two reservations on Production system with this situation, on any other cases the reservation takes the deletion flag when closing the Maintenance Order.
    What could be the problem?

    Hi,
    Check whether you have done good issue for that component .
    whenever you do Teco open resurvation will cancelled.
    Regards,
    vinit

  • How to activate  NCM code Field on STO PO(doc type:UB) for Brazil

    Dear Gurus,
    I,m working on STO PO-Doc type UB for Brazil.On PO item level on the Tab Page Brazil one field should be there with name NCM CODE.That field is disppeared for this doc type UB.For all the other doc types that field is visible.
    I have checked the settings related to UB and the field NCM codeScreen field:MEPO1326-J_1BNBM
    is mandatory.
    Can u kindly inform me how to make the field visible?
    Regards
    Kumar

    .

  • Data Source to get activity type(ActTyp) for service orders.

    Hello friends..
    Could you please provide, with the data source, that can be used to derive activity types (ActTyp),for service orders.
    (Not maintenance activity type (PMACTTYP, in BI))  
    I have checked ZLIS_18_ORDER, where i could find (Maintenance activity type, ILART) but not Activity type.
    Or if we need to create a Genric DS for same, could you ppl please provide me with the table name, to get the Activity type.
    Thank you.
    Raghu

    Thank you Rajesh,
    Could you please lemme know, how can i pick this value, as there is no AUFNR (Order Num) in this table, so that i can pick up using order number.
    Thanks '
    Raghu

  • PR type generated by maintenance orders

    Hi Gurus,
    Where do you defined the type of purchase requisition generated by maintenance order ? Is it possible to have different types of PR depending on the material type of the component in the maintenance order ?
    Cheers
    Olivier

    Hi,
    You can define the PR type at following IMG point:
    - Plant Maintenance and Customer Service
      - Maintenance and Service Processing
       - Maintenance and Service Orders
         - General Data
           - Define Account Assignment Cat. and Document Type for Purchase Requisitions
    The value is usually set to NB but this can be different. Only one value can be defined for PM orders.
    To get varying document types consider exits COZF0001/COZF0002 and adjust the field BSART.
    -Paul

  • Lock NOT set for: Archiving the data from a data target

    Dear Expert,
    I try to archive one of my info cube, when i start to write the Archive file the Free Space in the Archive folder not enough and it make the process error.
    Then i try to changes the Archive folder to another path with enough free space. But when i start to write the archive file with new variant this error message came up :
    ==============================================================
    An archiving run locks InfoProvider ZICCPS810 (archivation object BWCZICCP~0)
    Lock NOT set for: Archiving the data from a data target             
    InfoProvider ZICCPS810 could not be locked for an archiving session 
    Job cancelled after system exception ERROR_MESSAGE                  
    ==============================================================
    Please Help Me.
    Wawan S

    Hi Wawan,
    If the earlier archive session resulted in error, please try to invalidate the earlier session in archive management and try running archive job again.
    Hope this helps,
    Naveen

  • CHARM error - No Target system for Normal transport generated from another client

    Hi Gurus,
    This is regarding normal change. We have two clients in development. (Workbench and Customizing)
    We were trying to do Automatic import from development client to Quality. When importing the job, I’m getting an error related to Project Status switch. "you cannot import any request for the project at the moment" It works fine for another development client and we can see the target system in Project status switch.
    But, checking the Project Status switch, looks like there’s no Target System defined for Normal transport generated from another client of development.
    I attached some screenshots related to this.
    Can you please help how to add a target system for another client of development ?
    Regards,
    Salman

    yes, client 110 is present in the task list of the project. yes route is defined because it is working for urgent change

  • ESTF Requisitions generated from Work Orders (IW31)

    I am generating purchase requisitions from work orders via IW31. I can edit field selection key ESTF to open certain fields for editing in transaction ME52N.
    However if I generate a service requisition the service line item fields are not available in field selection key ESTF. Where can I allow the service fields to be edited for requisitions generated from work orders. What field selection key should I update?
    Any guidence or ideas would be greatly appreciated.

    ML90 - IW31 controls what fields are available for change in the work order transaction IW31. It does not control what fields are available from ME52N. The issue face is that our maintenance staff are creating purchase requisitions from work orders. Purchasing then needs to be able to adjust the pricing on the service lines in the requisition, however since these originated from a work order the fields are unavailable for input.
    We were able to get around this issue by editing field selection key ESTF in the requisition screen layout config. This works for material purchase requisitions but not services. I am looking for an extension of ESTF in transaction ML90 if that makes sense. Any guidence you could provide would be appreciated.

  • Customisation settings for VC Configuration copy from Purchase order to GRN(Goods Receipt note)

    Hi Experts
    I was looking for Customisation settings for VC Configuration copy from Purchase order to GRN(Goods Receipt note),
    Please share.
    Regards
    Sandeep

    Hi Ritesh
    Thanks for your reply,
    I checked  both of these transaction  we need to select 3 option Characetrstics frm configuration(prio) and classification. I will check that, I had one more question
    In PO VC configuration is called for class type-300  and  in GRN VC configuration  is called for class type -023. How it will fetch the variant class configuration to Batch class configuration?
    Once we had faced some issues the copy from PO to GRN was happening for some batches & some batches it was not happening.
    yes we have activated Mill Functions in our ERP box.
    Regards
    Sandeep

  • Total Quantity generated from Process Order

    Dear Experts,
        Can you help me on how to find the total quantity generated from process order.
    Example: I want to see for a particular material what is the total quantity converted in COR6N for a particular period.
    Thanks

    Got the report from COOISPI items list. Thanks

  • User exit or BADI for technical closure of a maintenance order

    Hello,
    Please I need the help of you.
    Is there any User exit or BADI for technical closure of a maintenance order
    regards

    Hello ROB,
    Please do not post duplicate thread.
    You can check below two BADI's.  ATP_PUBLISH_RESULTS and  IWO1_SCREEN_MODIFY. Because I have got two BADI's through finder.
    You can also check WO10004, WO10005, WO10006, WO10007, WO10008, WO10009, WO10010 and WO10011 user exits.
    Thanks & Regards,
    Abhijit

  • Deletetion of  service PR from maintenance order

    Hi Experts ,
    Is it possible to delete service PR from maintenance order. If it is created from order due to some problem I want to delete it ,so is it possible ?
    With best regards,
    AVI DDS.

    Hi
    Deletion of PR from Maintenance Order is not possible because the PR is created automatically
    This PR will get deleted automatically when you cancel//teco/complete the order
    Otherway around is you can always block the PRs
    Regards
    Kartik

  • Multiple Doc Types for a given Protocol Revision

    We ar a large EDI shop. In our scope we have multiple Protocl Revisions and Multipl Document Types tied to the Revision.
    For Example we have Protocol Revision X12_4010 and multiple Documents
    850,856,860,824,997.
    I am able to get docs through but only when the ISA information matches what is defined @ the protocol level. I.E. navigate to Protocols/Name/Protocol. It is the document paramaters here that I am having to make match. I am thinking this cant be right and I must of made a mistake in my config.
    Any ideas how I can allow any ISA details @ the protocl level and do the overrides @ the partner level/business action level ?

    Hello,
    Please setup sometime in your conveniece to disucss more. However to process every document you need to have an associated business action for e.g process_850 which encapsulates the Document Protocol revision i.e (Document Type and Revision e.g 850, 4010), where in you can define the envelope information.
    While creating additional Business Action such as process_810 , you can make use of existing Document protocol revision thereby using the envelope information defined specific to process_810. Ideally you should override the Document protocol parameter specific to Trading partner.
    Rgds,Ramesh

  • MM-SRV-SUS: Setting for Service Procurement SRM7.0 ECC 6.0 Ehp4

    Hello,
    I have to implemente the service procurement scenario between MM and SUS.
    Can you explain me what are the main settings that I have to make in order to implement the service procurement scenario ?
    It'is very irgent.
    Please help me.
    Good work,
    Michele

    Hi
    Follow all the steps given in SRM 4.0 config gidue(plan driven procurement) to set up, make sure all the PI configuration is done.
    Following use PI path for replciating the documents from ECC to SUS and vice versa: PO and Service confiramtion rest of them are still on IDOC.
    To enable replication of PO and service confiramtion follwoing workflow need to enabled in SWETYPV:
    BO BOR object type BUS2012(PO) CHANGED WS3800008
    BO BOR object type BUS2012(PO) CREATED WS3800008
    Limitation is only free limit PO are replicated to SUS, contract limit and Overall limit is not supported.
    with regards
    Manjunath

Maybe you are looking for