Multiple Domains in a Single Server

Hi:
I have a requirement where two domains (at this time) need to be set-up in single server.
Each domain need to have a Admin Server , OSB, SOA, OSR and OER as managed servers and each runs in different port.
Each domain has it own schema, but shares the same instance and database
Is it possible to run both domain at same time, (i-e) i should be having both the servers up and running and should be able to open the consoles of Admin server and managed servers for each of the domains configured?
Regards,
RK

Is it possible to run both domain at same time, (i-e) i should be having both the servers up and running and should be able to open the consoles of Admin server and managed servers for each of the domains configured?That should be no problem... Use different port numbers, different schemas and different domain directories... You can share the same product installation...
Cheers,
Vlad

Similar Messages

How do I host multiple domains on a single Messaging Server?

How do I host multiple domains on a single Messaging Server?
<p>
To host multiple domains on one Messaging Server, use the
mailAlternateAddress attribute. If you want to host two domains
(customer1.com and customer2.com) on your server mail1.domain.com,
make sure that:
The various domains (in DNS) point to the installed mail server
(you must have the MX records that
points mail for customer1.com to mail1.domain.com and
customer2.com to mail1.domain.com)
That each person receiving mail at customer1.com and
customer2.com has an appropriate mailAlternateAddress
attribute describing the appropriate email address. For
instance, John Doe can have an email address (i.e. the value
of the 'mail' attribute for the John Doe LDAP entry) of
[email protected] and receive his mail on
[email protected] (the value of the mailAlternateAddress
attribute)
With Messaging Server 3.5, mailAlternateAddress can take the
form of @mail1.domain.com. If jdoe's mailAlternateAddress is
set to @mail1.domain.com, mail sent to [email protected]
will be delivered to [email protected]

jaygatsby1123 wrote:
So what exactly am I doing with virtual hosts? There is a place for Aliases... What would I put in the "Aliases" box?
Any other host name that you want to resolve to the specified virtual host. It's quite literally an alias.
if you want www.example.com and www.example.org to end up at the same web site and you already have a virtual host — Apple refers to virtual hosts as sites — configured for www.example.com in Server.app, then you'd add www.example.org as an alias for the www.example.com virtual host (site).
Virtual hosts are implemented in a web server using some details of the HTTP or HTTPS protocol, and what the web browser (client) specified. The client gets handed an IP address or a domain name by the user, and the client then fetches the associated IP address for the target web server from the client's DNS services or local host database, and the client then connects to the IP address and passes over the text string that the user had requested — the IP address or domain name or even some local shortcut set up in the client system — via the HTTP or HTTPS protocol. The web server receives and processes this arriving text string from the client, and uses it to select which web site to render back to the web client. One subtle detail lurks here, too: the server's own DNS configuration really isn't involved in the selection of the virtual host.

SCCM 2012 Multiple Domains with a single SCCM instance

Hello:
Can SCCM 2012 be deployed to multiple untrusted domains within a single install?
I work for a company that maintains multiple client networks all Windows Domain and non are trusted / or are even aware of the other sites.
I would like to setup a SCCM 2012 (and also a Virtual Machine Manager for HyperV) at my office and manage all my different client sites from the single SCCM server.
The connection would be from my office over the Internet in through their on prem firewall
Currently we use Centra Stage and have used Kaseya in the past. I am looking to move from them and focus on SCCM to do this for me.
Is this even possible to do with the product?
Thanks in Advance!
-David

Yes, ConfigMgr can manage (un)trusted forests, but what exactly do you mean with "not aware of the other sites"? A requirement is that name resolution and a connection is possible.
For some good scenario's see also this series:
http://blogs.technet.com/b/neilp/archive/2012/08/20/cross-forest-support-in-system-center-2012-configuration-manager-part-1.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Multiple Oracle Products on Single Server

Can we install Multiple Oracle Products for Development and Testing on a Single Server?
Oracle Database 9i Enterprise Edition.
Oracle 9i Application Server
Oracle Applications 11i (Financials GL,HRMS PAYROLL)
Oracle Discoverer 4.x
Oracle Internet Developer Suite (Forms Server, Reports Server,
If yes,
Do they need to be in separate ORACLE_HOME or same ?
Also what should be the sequence of Install, i.e. what should be installed first?

The following products needs to be in their own Oracle Home:
Oracle Database 9i Enterprise Edition. --> in its own O_H
Oracle 9i Application Server --> in its own O_H (assuming this is 1.0.2.2 or 9.0.2)
Oracle Applications 11i (Financials GL,HRMS PAYROLL) --> in its own O_H
Oracle Discoverer 4.x --> in its own O_H (this is a 806 based product btw)
Oracle Internet Developer Suite (Forms Server, Reports Server) --> This can either be in its own O_H or in the O_H which has 1.0.2.2 Oracle9i Application Server.

Oracle multiple homes on a single server

This is about maintaining multiple oracle homes within a single server for different oracle versions.
On a Solaris-9 server I need to have 2 11g versions where 11.1.0.6 serves one instance and 11.1.0.7 is expected to serve 2 upgraded database instances.
For multiple homes involving full installations it is simply a matter of installing software in a new home with a new home-name. But 11.1.0.7 is a patch installation that needs an existing 11.1.0.6.
What is the recommended approach in this case to host multiple oracle homes?
Oracle's documentation claims their cloning tools can be used (prepare.pl and clone.pl perl scripts).
It also has something on runInstaller -clone mention.
What I've achieved so far is:
(1) Install 11.1.0.6 via Solaris-packaging onto a clean server. This installed onto $ORACLE_BASE/product/11.1.0 using ORACLE_HOME_NAME=OraDb11g_home1
(2) Upgrade this to 11.1.0.7
(3) Detach this oracle-home from global inventory
(4) Rename the folder 11.1.0 to 11.1.0.7
(5) Re-attach as new oracle-home (name=OraDb11g_11_1_0_7) and relink at the same time using runInstaller -clone command
I am no DBA, so I'd like to know if the above approach is good enough or if there is any other recommended approach.
Many thanks.
G.Sharma.
Edited by: Sharmag on May 31, 2012 11:38 AM

@Helios, thanks but curious - why is this not stuiable under installation? - regards,
@Shrini - I am using Solaris packaging for installing oracle software. So unless I rename the target folder I cannot achieve different the same 11.1.0.6 in 2 different folders.
Even if I managed to tweak Solaris packaging and install the second oracle (11.1.0.6) into a second folder, wouldn't that be the same as renaming an oracle folder-name? In this case, we still would end up with the same issue of relinking and correcting the global inventory.

Multiple Domains/Website On Single Hosting Plan

I currently host my website with a shared hosting company
that uses the latest version of ColdFusion MX.
I recently registered a second domain and pointed it to the
same IP address. I found some code on another ColdFusion forum that
allows you to direct users to subfolders depending on the domain
(cgi.server_name) in their request (see attached code).
Here's my sample file structure (names are changed to protect
the innocent)...
/ (Root)
application.cfm (With The Attached Code In It)
index.cfm
/FOLDER1/ (Folder For domain1.com Content)
index.cfm
janeway.cfm
chakotay.cfm
/FOLDER2/ (Folder for domain2.com Content)
index.cfm
picard.cfm
riker.cfm
The browser calls the proper file only when I use:
http://www.domain1.com/
http://www.domain2.com/
http://www.domain1.com/index.cfm
http://www.domain2.com/index.cfm
It looks like that in order for it to access any file, say
/folder2/picard.cfm, there needs to be a picard.cfm in the root as
well.
Is there a configuration difference between my server and the
person who wrote the original code; I can't imagine that the person
who wrote the code overlooked such an obvious flaw. Perhaps there's
a better way to go about this all-together?

Hi,
We are into a situation where we need to authenticate users of two domains and these two domains are completely independent (no common DNS server). ISE is not able to resolve one of the domain using the DNS server settings and Adding a host entry for the domain name is not sufficient since Kerberos, GC and LDAP SRVs need to be resolvable as well.
From what I know ISE 1.3 should supports disjointed domains and there is no requirement for ISE to have 2 way trust relationship with domains.
Please share your experience if someone has faced similar situation before.
Regards,
Akhtar

Multiple oracle database on single server

Hi,
In our organization, we are going to install, SRM, BW and XI on a single server, each going to use its own database.
So, in that case, will the listener and listener port for all the three database will be the same, or we need to define it during the installation.
Please help me in this regard.
Thanks and Regards,
Sailesh K

Hi Sailesh,
The best option is different binaries (Oracle & Sap), different Filesystems and different ports (Listener, msserver, gw, and so on) for every system you install. And, of course, different system numbers!
Best Regards,
JC Llanes.

Multiple SAP instance on single server.

Hello Experts.
We are in process of implementaing SAP solution withLandscpe having systems ECC 6.0, SolMan 4.0, BI. We are planning to have 3 Sytem landscape for all.
Now but currently we are having only one Physical server
Is it possible to Install 6 SAP system on single server?(DEV and QAS for ECC, Solman, BI respectively). The server is having sufficient hardware for 6 system as per sap standered. Planne OS is RHEL and DB MaxDB. Initially we are having 16 GB RAM extendable.
Will SAP support such kind of landscape?

Hello,
We did not put 6 systems on the same server but we are running fine with 4 systems (R/3, XI, BI) on one server (8 itanium, 32 GB ram).
16 GB seems very small for 6 systems...
Don't forget that beside the obvioous economy, they are also big cons with mutualization.
When the server crashes because of a hardware failure, all of your landscape is out and the phone rings a lot.
When you need a reboot for one system, you have to stop all the others...
Good luck !
Regards,
Olivier

Running Multiple weblogic Domains in a single server

How to run two domains simultaneously? I have one domain running on 7001. I want to run second domain on 7010. How can I achieve it?
Edited by: 789038 on Aug 23, 2010 9:55 AM

You need to ensure that no other port conflicts , not just ListenPort (SSL port as well) (e.g. if you run pointbase locally and if each domain is using a separate instance then the pointbase db shouldnt use the same port) - there is also a port specified (For i think debug ), that should also be different. Why are you doing this though?

Multiple Domains with one single Portal

We have installed Oracle Infrastructure and Oracle Midtier on one box. Let's say the domain name is http://www.abc.com. When we query http://www.abc.com, it
goes to the SSO (Infra) and validates the username and password and takes it back to the Mid-Tier Portal Pages. At this junction, everything is working as expected.
Now, we created two more webpages and they correspond to two domains -- let's say http://www.pqr.com and http://www.xyz.com. The two webpages that got created were PUBLIC pages, so anybody can have access to those pages.
Can we implement our requirements using one infrastructure and one midtier (1st)installation? OR do we install two more midtier (2nd, 3rd) to correspond
to each domain name which are www.pqr.com and www.xyz.com and then have the proxy server redirect the request for www.abc.com to 1st-Midtier, www.pqr.com
to 2nd-Midtier and www.xyz.com to 3rd-Midtier?
We have a apache proxy server installed in front of the 9iAS, but we are going to use it just for redirection.
I understand Oracle Infrastructure has only ONE portal Schema and so how would multiple midtier (webpages) will reside? Do I need to create another PORTAL repository and a new DAD, so that www.pqr.com points to the 2nd-Portal Repository and www.xyz.com points to the 3rd-portal?

Through a single mid-tier it is possible to configure Oracle HTTP Server/Web Cache such that they are configured to handle multiple logical site names (e.g. www.pqr.com and www.xyz.com) by using Virtual Hosts.
In terms of a single Portal Repository being accessed by multiple mid-tiers (or logical sites), this is not currently possible since the Portal Repository is configured with only one set of site details.
For further information on configuring Virtual Hosts and Portal see the Advanced Chapter of the 10g Portal configuration guide...
http://download-west.oracle.com/docs/cd/B10464_01/portal.904/b10356/cg_advnc.htm#1040267

How can I host multiple domains on a single Mac?

It's actually a little more complicated than that.
I have a site, let's call it site.com, and it's hosted just fine on my Mac Mini, accessible via the Internet and everything.
I want to use the .co domain of my site, which is pointed to the same IP as .com in DNS records, for the Wiki feature. Unfortunately, I'm pretty sure OS X Server won't let you use both a custom website AND Wiki, but besides that I want the two on different domains.
I have a Parallels VM of OS X 10.9 with Server installed and more or less configured for Wiki with the .co domain.... I feel like I'm really close, here, maybe just a couple of steps away, but alas, I'm stuck, mostly because all the guides I've found that cover this do so with earlier versions of OS X Server, and aren't quite doing what I want to do (another domain and Wiki as opposed to just adding a Site to the list, so I think I absolutely need a VM here).
I'm pretty sure I have to configure the DNS settings of the OS X Server instance in the host OS, and I have an IP to give it (if I put that into a browser in the host OS X, it takes me to the .co site, but going directly to .co just takes me to .com).
Any ideas?

jaygatsby1123 wrote:
So what exactly am I doing with virtual hosts? There is a place for Aliases... What would I put in the "Aliases" box?
Any other host name that you want to resolve to the specified virtual host. It's quite literally an alias.
if you want www.example.com and www.example.org to end up at the same web site and you already have a virtual host — Apple refers to virtual hosts as sites — configured for www.example.com in Server.app, then you'd add www.example.org as an alias for the www.example.com virtual host (site).
Virtual hosts are implemented in a web server using some details of the HTTP or HTTPS protocol, and what the web browser (client) specified. The client gets handed an IP address or a domain name by the user, and the client then fetches the associated IP address for the target web server from the client's DNS services or local host database, and the client then connects to the IP address and passes over the text string that the user had requested — the IP address or domain name or even some local shortcut set up in the client system — via the HTTP or HTTPS protocol. The web server receives and processes this arriving text string from the client, and uses it to select which web site to render back to the web client. One subtle detail lurks here, too: the server's own DNS configuration really isn't involved in the selection of the virtual host.

Multiple Database Instances on Single Server and effect of NLS_LANG

What is the effect of the NLS_LANG registry setting on a Windows server that is to host multiple database instance each created with a different database character set ? The server needs to support data in the following languages : Thai, Chinese Traditional, Chinese Simplified, Vietnamese and Korean. Selecting the Unicode character set(AL32UTF8) is not an option since the application is not Unicode complaint.
My understanding is that as long as NLS_LANG is set correctly on the client connecting to the particular database instance then the data will be stored correctly - is this correct ?
What should NLS_LANG be set to on the server if there are multiple oracle instances with different character sets ?

My question is not in relation to connecting to the database on the server itself but with regards to client connections. What I need to know is what is the effect of the NLS_LANG setting in the registry on a server that has multiple databases each created with a different character set ?
Say for instance, the server has two databases - one created with the character set ZHS16GBK and the other created with the character set JA16SJIS and NLS_LANG is set to SIMPLIFIED CHINESE_CHINA.ZHS16GBK in the registry on the server. Will Japanese data that is inserted into the database that has character set JA16SJIS be stored correctly when it is inserted from a client with NLS_LANG set to JAPANESE_JAPAN.JA16SJIS even though NLS_LANG is set to SIMPLIFIED CHINESE_CHINA.ZHS16GBK on the server ?

Multiple web services on single server causing object undefined errors

Hi,
I've currently got a bit of a strange problem within a web service that is proving difficult to debug.
There are the web service urls :
     api.domain.com                -> /var/www/html/api.domain.com/            -> CF mapping to MYSERVICE
     testapi.domain.com          -> /var/www/html/testapi.domain.com/     -> CF mapping to MYSERVICE_test
In both instances the cfcs that contain the code to be translated into a WSDL reside in /api/..., in the case of this example, /api/common.cfc. wsargs constists simply of refreshwsdl true.
If I call the following 2 lines ...
     obj_myservice = CreateObject('webservice','http://api.domain.com/api/common.cfc?wsdl',wsargs);
     obj_myservice_test = CreateObject('webservice','http://testapi.domain.com/api/common.cfc?wsdl',wsargs);
I then call the same method in both, and they are successful. When checking the "Data & Services" -> "Web Services" panel within the CF control panel, only the web service "http://api.domain.com/api/common.cfc?wsdl" is listed, and not testapi.domain.com......
If I reverse the order in which the WSDL's are loaded then this switches, and testapi.domain.com..... gets listed under "Web Services" but api.domain.com..... does not. In essence it appears as though for some reason the CF server overwrites one with the other. The exact "object undefined" error is proving difficult to reproduce reliably.
This appears to happen no matter which server is accessing the web service, be it the same server or a remote server. All servers involved are running CF8. Accessing the 2 WSDL files in a browser results in the 2 WSDLs being rendered correctly with different namespace values.
On the same server are 2 more services
     MYSERVICE2
     MYSERVICE2_test
These reside in the /api2 directories on the same 2 subdomains, api. and testapi.   MYSERVICE2 and MYSERVICE2_test appear to conflict with each other. MYSERVICE and MYSERVICE_test appear to conflict with each other. MYSERVICE and MYSERVICE2 do not appear to conflict with each other.
Is there a configuration change or anything like that which I should be aware of that would prevent me doing the above? The 2 /api/ directories are nearly identical with the exception that the namespace and complex type names have been set to http://api.domain.com & MYSERVICE in the first, and http://testapi.domain.com & MYSERVICE_test in the second url.
I have also tried mapping /MYSERVICE and /MYSERVICE_test within /opt/coldfusion8/WEB-INF/jrun-web.xml to no avail.
Any help would be appreciated. If there is any useful information that I have missed off please let me know and I'll dig it out.
- Simon H

Hi,
As an extension to the above
Server                Test service         "Live" service
1 ("dev")                devtest                   devlive               http://dev(test/live).domain.com
2 ("test")                testtest                   testlive               http://test(test/live).domain.com
I currently have a test script (TEST1) that performs the following :
CreateObject + call method from devlive
CreateObject + call method from devtest
CreateObject + call method from testtest
The script errors on the third, when it attempts to call a method from devtest. On the server on which this test script is running, by the end of this, there are the following 2 web services in the Coldfusion control panel :
http://devlive.domain.com/api/common.cfc?wsdl
http://testtest.domain.com/api/common.cfc?wsdl
I have a second test script (TEST2) on a second server distinctfrom the first test script server, on which the following is performed :
CreateObject + call method from testlive
If I execute TEST2, then it executes fine. If I execute TEST1 straight after, then I receive the following error on TEST1
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: org.xml.sax.SAXException: Deserializing parameter 'objectFetchReturn': could not find deserializer for type {http://common.types.WEBSERVICE_test}details
Where WEBSERVICE.types.common.details is a complex type (/api/types/common/details.cfc). If I then run the TEST2 script again straight after, the same error appears (with WEBSERVICE in place of WEBSERVICE_test). If I execute TEST2 twice in a row, or TEST1 twice in a row, then the error disappears"test" server has got jrun-web.xml edited to include the following, which "dev" does not.
<virtual-mapping>
    <resource-path>/WEBSERVICE_test</resource-path>
    <system-path>/var/www/html/testapi.domain.com/api</system-path>
</virtual-mapping>
<virtual-mapping>
    <resource-path>/WEBSERVICE</resource-path>
    <system-path>/var/www/html/api.domain.com/api</system-path>
</virtual-mapping>
I hope that this extended explaination helps.
Simon H

Multiple database Instance on single server

Hi friends,
I want to install Solution manager in the same system which I have installed ECC6. So I want to install another database(10g). Can any one tell me the possibities to install it.
regards,
Nageshwar

Hi Nageshwar,
yes, it is possible.
See chapter "Multiple Oracle Homes" of the guide "SAP ERP 2005 SR2 ABAP on Windows: Oracle" available on <a href="http://service.sap.com/instguides">http://service.sap.com/instguides</a>
You can also install one more DB in your already existing ORACLE_HOME.
best regards

Start multiple domains simultaneously on 1 Weblogic server installation?

Is it okay to start and run multiple domains simultaneously. Better yet, when having multiple domains on 1 WLS server, should each domain have a different port number in order to be run simultaneously?
Here's my scenario - I installed Oracle Business Intellgence, which by default installs and configures WLS server for certain Business Intelligence applications (BI Publisher). This instance was running fine and good and still is.
Then I had another application, Oracle Data Integrator, which has a Console piece that requires a domain on WLS. So instead of modifying the existing domain for Oracle Business Intelligence, I created a new domain via the Configuration Wizard and selected those components for Oracle Data Integrator.
therefore current domains:
...\domains\bifoundation_domain --> installed automatically as part of Oracle Business Intelligence
...\domains\odi11g --> I created this domain after I
Now I have 2 domains under 1 WLS Server (windows 7 64bit), but if I startWeblogic.cmd for the bifoundation_domain, and I startWeblogic.cmd for the odi11g...then only the components for the bifoundation_domain become available via the WLS Console.
Questions:
- Can I run both domains simultaneously?
- Should I have modified the bifoundation_domain to include Oracle Data Integrator component; therefore only having 1 domain but having everything run under that domain?
- Does the Port for each domain matter? both bifounddation_domain and odi11g domain use ports 7001
Are there any other considerations? Thanks much.

Hi,
It is perfectly OK to run multiple domains on a single Weblogic server installation. Only constraint would be you have enough capacity available on your server to start multiple instances.
Things to note is, if your domain1 is running on listen address : port { localhost : 7001 } then your other domain should be configured on a different port say {localhost : 8001 }. If you want both domain to run on same port then go for virtual IP's to be plumbed on your physical network interface and configure as,
domain1 - { ip1 : 7001 }
domain2 - { ip2 : 7001 }
this way you will can access both domain admin console on same port.
Remember, Weblogic resources cannot be shared between domain, however a single nodemanager will be enough to monitor both the domains.
* rank it if answer is helpful :) *
Thanks,
Ranjan

Multiple Domains in a Single Server

Similar Messages

Maybe you are looking for