Multiple Domains on NWDI

Hi experts!
I've started using NWDI, and i've noticed that i already have 23 tracks. I would like to group tracks by some kind of category.
As far as i understand, the domain tab could function like a category to group my tracks.
But when i go to "Domain Data" tab the field domain id is readonly and is a textbox.
There is any way to create multiple domains, each one with ther own tracks?
If not, there is some way to reproduce my requirements?
I think installing CMS on another server is not really a good option because the code and development will not be integrated on one place, right?
Thank you guys.

Hi Nuno,
I don't think you can group using domain tab.
>There is any way to create multiple domains, each one with ther own tracks?
No Option available in NWDI.
Refer to http://help.sap.com/saphelp_nw70/helpdata/en/f2/7c04702864304bb38e0b1cd6667c2b/content.htm
SAP NetWeaver Development Infrastructure (NWDI)
Hope it helps
Regards
Arun

Similar Messages

Issuing Multiple MYSAPSSO2 tickets for Multiple Domains

Hi,
I am having a problem understanding the SAP documentation on how to go about issuing SAP login tickets in multiple domains. In the documentation it states that in order to do so, you require either a IRJ or the SAP ISAPI Web Filter installed in on a server in the target Domain. I have now setup the IIS_SSO.dll ISAPI filter in the domain I require the SSO ticket to be issued in however when I make a request to that webserver I do not see the MYSAPSSO2 cookie being created in my browser, I do see in the ISAPI logs that the request has been filtered and the portal username extracted and set to the configured HTTP Header, but no new Cookie created in the DOMAIN.
Can anyone help? Has anyone done something like this before?
Basically I have a portal in the domain myportal.subdomain.domain.com and an ITS in the domain myits.domain.com. With this configuration the MYSAPSSO2 cookie is not sent to the ITS server as it is in a Super Domain. So what I want is to configure the portal to issue a Cookie in the super domain (domain.com) rather then subdomain.domain.com. I thought I could do this with the parameter login.ticket_recieving_hosts in the usermanagment.properties file (EP5) and the IIS ISAPI filter to SSO (IIS_SSO.dll) configured on a website in the super domain (domain.com).
Any help would be greatly appriciated.
Simon.

I believe we had to set the domain relax level (ume.logon.security.relax_domain.level) but needed to make sure this was secure since it changes the domain scope of cookies that are valid for the system.
See the following:
http://scn.sap.com/thread/1534863
http://help.sap.com/saphelp_nw70ehp3/helpdata/en/5e/473d4124b08739e10000000a1550b0/frameset.htm
Hope this helps.

Multiple Domain files, Multiple Sites, Publishing Problems

I am frustrated beyond belief. I'm an old hand-coder, coming from BBEdit, but I've been using iWeb almost exclusively since its release, because it really is a great product for quick, easy, stylish designs.
However.... In that year, my collection of sites has grown to 12. Discovering that iWeb becomes a major dog when dealing with that much material, I found and followed the instructions - today - to separate my sites into individual domain files, and edit them individually. iWeb is much snappier and publishing goes much more quickly.
The problem? Well... after editing, "Publish to .Mac" rarely works. Only "Publish All to .Mac" will get the site online (something about an error with the index.html file). But "Publish All to .Mac", I've just discovered, DELETES the other websites that I have previous published. All day I've been doing updates and publishing my sites, only to discover that the uploads have all been wiped out by the most recent one!
I'm a big enough fellow to admit that my knowledge isn't total nor perfect - so please, would someone out there with a better handle on iWeb than I (preferably someone who actually deals with multiple domain files rather than someone who thinks they can guess the problem) please clue me into how we make use of this program non-destructively?
I suppose I could always publish everything to folders and upload it to my iDisk (which itself remains ridiculously slow after how many years now? Sheesh!), but that detracts from the elegance of the .Mac integration, the counter features, - not to mention the little fact that I'm a paying .Mac customer and this darn thing should just work, no?

Mark:
I was where you were also. You should give iWebSites a try. It's to iWeb what iPhoto Library Manager is to iPhoto.
I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want. Just remember to put a copy of your current Domain.sites file somewhere else on your HD in case the splitting gets messed up. It went very smoothly for me and I now manage 19 or so sites.
Do you Twango?

How do I host multiple domains on a single Messaging Server?

How do I host multiple domains on a single Messaging Server?

To host multiple domains on one Messaging Server, use the
mailAlternateAddress attribute. If you want to host two domains
(customer1.com and customer2.com) on your server mail1.domain.com,
make sure that:
The various domains (in DNS) point to the installed mail server
(you must have the MX records that
points mail for customer1.com to mail1.domain.com and
customer2.com to mail1.domain.com)
That each person receiving mail at customer1.com and
customer2.com has an appropriate mailAlternateAddress
attribute describing the appropriate email address. For
instance, John Doe can have an email address (i.e. the value
of the 'mail' attribute for the John Doe LDAP entry) of
[email protected] and receive his mail on
[email protected] (the value of the mailAlternateAddress
attribute)
With Messaging Server 3.5, mailAlternateAddress can take the
form of @mail1.domain.com. If jdoe's mailAlternateAddress is
set to @mail1.domain.com, mail sent to [email protected]
will be delivered to [email protected]

jaygatsby1123 wrote:
So what exactly am I doing with virtual hosts? There is a place for Aliases... What would I put in the "Aliases" box?
Any other host name that you want to resolve to the specified virtual host. It's quite literally an alias.
if you want www.example.com and www.example.org to end up at the same web site and you already have a virtual host — Apple refers to virtual hosts as sites — configured for www.example.com in Server.app, then you'd add www.example.org as an alias for the www.example.com virtual host (site).
Virtual hosts are implemented in a web server using some details of the HTTP or HTTPS protocol, and what the web browser (client) specified. The client gets handed an IP address or a domain name by the user, and the client then fetches the associated IP address for the target web server from the client's DNS services or local host database, and the client then connects to the IP address and passes over the text string that the user had requested — the IP address or domain name or even some local shortcut set up in the client system — via the HTTP or HTTPS protocol. The web server receives and processes this arriving text string from the client, and uses it to select which web site to render back to the web client. One subtle detail lurks here, too: the server's own DNS configuration really isn't involved in the selection of the virtual host.

How to create a muse site in various languages with multiple domains

I have been asked to create a website for a product. A very simple website with maybe one or two pages and one product for sale for which the client would like Paypal as the payment gateway. Simple right?
No! This client would like to market their product into Europe, they would like to purchase multiple European domains ( .fr, .de for example).
So how on earth can I do this? I will be using Muse for build and Business Catalyst for hosting.
Bearing in mind the client will not want to pay for separately hosted sites. Is there a way of translating the text for each domain. Or could I assign multiple domains but direct them to different home pages within the same site?
I haven’t a clue how to problem solve this.

Hi,
Some links that might be useful,
how to set up a multilingual website with Adobe Muse and push it live to Adobe Business Catalyst
Re: How can i create different languages for my page?
How can i create a multilingual website?
how to create a multilingual site
Do let me know if you have any question.

How to use the Load Balancer Plug-in to serve multiple domains

In SJSAS8.1 SE/EE the asadmin commands that create and maintain a load balancer configuration operate within a domain. When the load balancer configuration is exported an xml file is created that contains all the information for that domain. To make the load balancer plug-in balance the load for multiple domains, the loadbalancer.xml files can be manually merged to conatin the data that is exported from each domain's load balancer configuration.
For example, 2 domains are created, both having a load balancing configuration. After exporting both configurations using the asadmin export-http-lb-config command, the user would then cut and past the cluster information into the single loadbalancer.xml file that resides under the web server's config directory.
An example of the manually merged loadbalancer.xml file follows:
<?xml version="1.0" encoding="UTF-8"?>
<loadbalancer>
<cluster name="domain1">
<instance disable-timeout-in-minutes="30" enabled="true" listeners="http://localhost:1026 https://localhost:38181" name="i1"/>
<instance disable-timeout-in-minutes="30" enabled="true" listeners="http://localhost:1027 https://localhost:38182" name="i2"/>
<web-module context-root="ab" disable-timeout-in-minutes="30" enabled="true"/>
<health-checker interval-in-seconds="5" timeout-in-seconds="60" url="/"/>
</cluster>
<cluster name="domain2">
<instance disable-timeout-in-minutes="30" enabled="true" listeners="http://localhost:1029 https://localhost:38189" name="i3"/>
<instance disable-timeout-in-minutes="30" enabled="true" listeners="http://localhost:1030 https://localhost:38188" name="i4"/>
<web-module context-root="webservice" disable-timeout-in-minutes="30" enabled="true"/>
<health-checker interval-in-seconds="5" timeout-in-seconds="60" url="/"/>
</cluster>
<property name="response-timeout-in-seconds" value="60"/>
<property name="reload-poll-interval-in-seconds" value="5"/>
<property name="https-routing" value="false"/>
<property name="require-monitor-data" value="false"/>
<property name="route-cookie-enabled" value="true"/>
</loadbalancer>
Hope this helps - Mark

Mark, be my savior, I work for SUN as subcontractor at client site. the only one at site ...so I depend on this forum for solutions........
still having trouble failingover to second instance. I have two AccessManagers behind this loadbalancer.
Here is what I saw......
**************LOGS**********************
[20/Jun/2005:14:22:47] failure (15102): for host 128.114.65.13 trying to GET /amconsole/base/AMA
dminFrame, service-passthrough reports: timed out waiting for request body
[20/Jun/2005:14:22:47] warning (15102): reports: lb.runtime: ROUT1014: Non-idempotent request /
amconsole/base/AMAdminFrame cannot be retried.
So I went and updated the loadbalancer.xml (see at the end of the msg). Now I get a different kind of problem...
**************LOGS******************************
[20/Jun/2005:15:25:18] failure (15295): for host 128.114.65.13 trying to GET /amconsole/base/AMA
dminFrame, service-passthrough reports: timed out waiting for request body
[20/Jun/2005:15:25:18] info (15295): reports: lb.runtime: RNTM3003 : Error servicing the request : NoVal
Here is my loadbalancer.xml file...
<loadbalancer>
<cluster name="cluster1">
<instance name="instance1" enabled="true" disable-timeout-in-minutes="1" listeners="http://idm-test-1.ucsc.
edu:80 "/>
<instance name="instance2" enabled="true" disable-timeout-in-minutes="1" listeners="http://idm-test-2.ucsc.
edu:80 "/>
<web-module context-root="amconsole" disable-timeout-in-minutes="1" enabled="true" error-url="sun-http-lber
ror.html" >
<idempotent-url-pattern url-pattern="/*" no-of-retries="3" />
</web-module>
<web-module context-root="amserver" disable-timeout-in-minutes="1" enabled="true" error-url="sun-http-lberr
or.html" >
<idempotent-url-pattern url-pattern="/*" no-of-retries="3" />
</web-module>
<web-module context-root="ampassword" disable-timeout-in-minutes="1" enabled="true" error-url="sun-http-lb
error.html" />
<web-module context-root="amcommon" disable-timeout-in-minutes="1" enabled="true" error-url="sun-http-lberr
or.html" >
<idempotent-url-pattern url-pattern="/*" no-of-retries="3" />
</web-module>
<health-checker url="/" interval-in-seconds="15" timeout-in-seconds="2" />
</cluster>
<property name="reload-poll-interval-in-seconds" value="60"/>
<property name="response-timeout-in-seconds" value="30"/>
<property name="https-routing" value="false"/>
<property name="require-monitor-data" value="true"/>
<property name="active-healthcheck-enabled" value="true"/>
<property name="number-healthcheck-retries" value="3"/>
<property name="route-cookie-enabled" value="true" />
</loadbalancer>
**************************************************************

How to configure multiple domains in Active directory

HI,
How can I configure multiple domains on Active Directory. When I installed AD it asked for a domain name, there I gave ravigupta.com as domain name. But now I find no way of creating another domain.
I am a java developer and my task is to write a programme which returns all the domains available in LDAP server.
To start with ,I tried to create few domains in LDAP server ( AD ) but stuck up ,as i found there could exist only one domain.
Please tell me how to configure multiple domains in LDAP server ( Active Directory).
I skiped DNS configuration while AD installation.
-ravi

I'm sorry, but you should be asking on a different forum. This has nothing to do with Java.

Multiple domains and multiple IPs in the same MacMini Server

I am sure that this topic has been faced already but I cannot find enough information to really dig into a solution.
I have a macmini server with two IPs let say x.x.x.12 and x.x.x.13 .
The server is set up on the first IP. It has his primary zone, machine record, mail aslias and www alias.
Lets call the server domain server.domain1.com
Everything works fine I have a couple of local users and a couple of LDAP users. Just to test the machine setup.
I can send and receive emails using any of the users as [email protected]
Now I would like to have another domain, domain2.com in the same server .
The final goal is to have users under different domains. They have their own email box, calendar, etc.
It will be preferable that I can share the same username with different domains. But I can live without that option.
My first test was to have the second domain called server.domain2.com using the second IP. x.x.x.13 .
For that I created another Primary Zone with domain2.com as machine record of x.x.x.13 . To use the second IP I simply create another Ethernet interface on the macmini.
In the Mail -> Advance settings I added the host aliases as well as virtual hosting domains for domains2.com.
With this setting I can send emails as [email protected] or [email protected] but when I replay to their messages I get a "Relay access denied" error from server.domain1.com .
I also tryed another domain pointing to x.x.x.12, the same as server.domain1.com . I did not create any extra Primary Zone but the local host aliases and the virtual hosting domains.
Same issue. I can send but I get a "Relay access " error.
As you might notice I am a novice on servers settings. I just try to recreate a similar environment common to Virtual Hosting providers for my own website playground but I cannot cut through this email configuration obstacle.
Any significant meaning that can be leading me to learn how to do it will be very very appreciated . (beside lynda,com tutorials that I followed already but do not mention multiple domains for mails).
Thanks

the problem I try to solve is to manage multiple domains in one MacMini Server.
Having two IPs is secondary.
I would like that each domains has his own users with emails, iCals, Wiki and web sites.
The main problem is having emails to work for any additional domain beside the default one on the machine IP.
I also got an additional IP address to be used on the same server hoping that it make things easier but apparently is making things more difficult.

Start multiple domains simultaneously on 1 Weblogic server installation?

Is it okay to start and run multiple domains simultaneously. Better yet, when having multiple domains on 1 WLS server, should each domain have a different port number in order to be run simultaneously?
Here's my scenario - I installed Oracle Business Intellgence, which by default installs and configures WLS server for certain Business Intelligence applications (BI Publisher). This instance was running fine and good and still is.
Then I had another application, Oracle Data Integrator, which has a Console piece that requires a domain on WLS. So instead of modifying the existing domain for Oracle Business Intelligence, I created a new domain via the Configuration Wizard and selected those components for Oracle Data Integrator.
therefore current domains:
...\domains\bifoundation_domain --> installed automatically as part of Oracle Business Intelligence
...\domains\odi11g --> I created this domain after I
Now I have 2 domains under 1 WLS Server (windows 7 64bit), but if I startWeblogic.cmd for the bifoundation_domain, and I startWeblogic.cmd for the odi11g...then only the components for the bifoundation_domain become available via the WLS Console.
Questions:
- Can I run both domains simultaneously?
- Should I have modified the bifoundation_domain to include Oracle Data Integrator component; therefore only having 1 domain but having everything run under that domain?
- Does the Port for each domain matter? both bifounddation_domain and odi11g domain use ports 7001
Are there any other considerations? Thanks much.

Hi,
It is perfectly OK to run multiple domains on a single Weblogic server installation. Only constraint would be you have enough capacity available on your server to start multiple instances.
Things to note is, if your domain1 is running on listen address : port { localhost : 7001 } then your other domain should be configured on a different port say {localhost : 8001 }. If you want both domain to run on same port then go for virtual IP's to be plumbed on your physical network interface and configure as,
domain1 - { ip1 : 7001 }
domain2 - { ip2 : 7001 }
this way you will can access both domain admin console on same port.
Remember, Weblogic resources cannot be shared between domain, however a single nodemanager will be enough to monitor both the domains.
* rank it if answer is helpful :) *
Thanks,
Ranjan

Multiple Domain Files

A lot of questions are asked in this forum about managing multiple domain files and splitting existing ones.
The "solutions" seem to be either to use an application such as iWebsites or to duplicate the domain file into folders and delete the appropriate sites.
When I first loaded iWeb '08, I kept a copy of a blank domain file and use this to start a new site by duplicating it into a new folder and double clicking it to launch iWeb.
My main reason for doing this was to overcome the inability of iWeb to create a new domain file from the "File" menu.
I have stayed with this, not only for speed and convenience, but because I read this...
http://11mystics.com/blog/2007/09/08/how-do-you-manage-multiple-domain-files-for -iweb/
and also this....
http://discussions.apple.com/thread.jspa?messageID=6261141&#6261141
These comments are from two people who dig deep under the hood of iWeb and whose opinions I respect and have taken to heart.
Is this the best way to create new domain files?
Am I being over cautious?
Am I totally deluded?
The last question is open to psycho therapists only !

UUIDs are like finger prints in Domain.sites2. There are ways to start new Domain.sites2 without duplicate an existing one:
1) move the last accessed Domain.sites(2) from its location, or rename the holding folder.
2) change com.apple.iWeb.plist setting, I post the procedure here:
http://discussions.apple.com/thread.jspa?messageID=6007612&#6007612
This can be done with AppleScript or Unix shell script. Doing so will get you new Domain with new UUID.
When you duplicate a blank domain, you also duplicate its UUIDs, as of now there seems to be OK as long as you keep domain separate. However, we do not know what Apple will do in the future releases, here is UUIDs usage progression in iWeb:
We did not see much of them in iWeb1, because iWeb1 Domain.sites is flat structure.
We see UUIDs everywhere in iWeb2 Domain.sites2, from top to bottom; every page has it own UUID.
So, I would be skeptic about having duplicate UUIDs; even in separate domain packages.
I ran a cross this when a friend asked me to merge his Domain.sites2 packages, and I thought people should be aware of it.
I ended up write Applescript applications to merge, extract sites and clean existing Domain.sites2 package by assign new UUIDs.

Can you host multiple domain names on mobile me with iWeb '09?

Hi
Can anyone help, before I upgrade to iLife '09, I have a personal web domain name which I host on my mobileme account. My girlfriend now wants a website and I have bought her a domain name and want to use iWeb to design it but I can't seem to host multiple domains on iWeb '08, can you with iLife '09? Or will she have to buy her own mobile me account? Any help will be great!!!
Thanks

MobileMe -MME -is Apple's hosting service.
Domain Name System - DNS translates an understandable address like www.mywebsite.com into the IP address which is a number like 40:75:92:301.
Cname is a name of record in a database that records what domain name goes to what IP address.
IP address is just a unique number that identifies any device connected to the internet.
An FTP client is an application the uploads your files to a server using File Transfer Protocol.
I mainly use Web Site Maestro because it doesn't just upload the files but optimizes them first to remove all the unnecessary code that iWeb creates to allow your website to download at least 30% faster.
I also use Yummy FTP for sorting out and keeping track of my files on the server and uploading folders of images and music files along with their assets for flash presentations.
I have used Host Excellence for years because of the way they allow you to name your own root folder on the server and also their great tech support.
FTP and servers can be a bit confusing but, if you have a good hosting company, you can get by on very little knowledge and understanding. I do!
I couldn't agree more with you about the acronyms and jargon. The more people use them usually means the less they know. One of the most misused words is "domain". I tried to sort that one out here...
http://www.iwebformusicians.com/SearchEngines/Upload.html
Now I'm going FUH and ATNP.

Multiple Certs for multiple domains on one server

Is it possible with WLS6 and WLCS3.5 to serve up multiple domains with their own certificates?
i.e. https://www.foo.com and https://www.bar.com on the same box.

Hi,
for one WebLogic Server you can only specify one certificate. So to achieve
this you will have
to use different WLS instances for your domains - which is possible on the
same box.
Kind Regards
Maria Salzberger
Developer Relations Engineer
BEA Support
Mike Berger schrieb in Nachricht <3c21f5c3$[email protected]>...
Is it possible with WLS6 and WLCS3.5 to serve up multiple domains withtheir own certificates?
i.e. https://www.foo.com and https://www.bar.com on the same box.

Multiple objects, multiple domains, for-loops the problem?

Hi,
I've based a small amount of Powershell code off the code I've found here: http://halfloaded.com/blog/powershell-using-posh-to-search-across-multiple-domains-in-forest/
Ideally what I'm aiming for is for it to find the current forest, enumerate the domains, and then for each domain to search for a specific user. If it finds the user it should then do something, for now just clear a value extensionAttribute8.
What I suspect is happening is it finds the users but then tries to modify them while attached to the current domain, which is child1.
Domain structure:
- Root
- child1
- child2
cls
$objForest = [System.DirectoryServices.ActiveDirectory.Forest]::GetCurrentForest()
$DomainList = @($objForest.Domains | Select-Object Name)
$Domains = $DomainList | foreach {$_.Name}
foreach($Domain in ($Domains))
$ADsPath = [ADSI]"LDAP://$Domain"
$objSearcher = New-Object System.DirectoryServices.DirectorySearcher($ADsPath)
$objSearcher.Filter = "SamAccountName=testuser"
$objSearcher.SearchScope = "Subtree"
$colResults = $objSearcher.FindAll()
foreach ($objResult in $colResults)
$userDomain = $objResult.GetDirectoryEntry()
Set-ADUser $userDomain.DistinguishedName[0] -clear extensionAttribute8
It errors with
Set-ADUser : Cannot find an object with identity: 'CN=testuser,CN=Users,DC=root,DC=company,DC=co,DC=uk' under: 'DC=child1,DC=root,DC=company,DC=co,DC=uk'.
At line:17 char:9
+ Set-ADUser $userDomain.DistinguishedName[0] -clear extensionAttribute8
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (CN=testuser,C...pny,DC=co,DC=uk:ADUser) [Set-ADUser], ADIdentityNotFoundException
+ FullyQualifiedErrorId : Cannot find an object with identity: 'CN=testuser,CN=Users,DC=root,DC=company,DC=co,DC=uk' under: 'DC=child1,DC=root,DC=company,DC=co,DC=uk'.,Microsoft.ActiveDirectory.Management.Comman
ds.SetADUser
Set-ADUser : Cannot find an object with identity: 'CN=testuser,CN=Users,DC=child2,DC=root,DC=company,DC=co,DC=uk' under: 'DC=child1,DC=root,DC=company,DC=co,DC=uk'.
At line:17 char:9
+ Set-ADUser $userDomain.DistinguishedName[0] -clear extensionAttribute8
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (CN=dttestuser,C...ita,DC=co,DC=uk:ADUser) [Set-ADUser], ADIdentityNotFoundException
+ FullyQualifiedErrorId : Cannot find an object with identity: 'CN=dttestuser,CN=Users,DC=its,DC=ad,DC=capita,DC=co,DC=uk' under: 'DC=central,DC=ad,DC=capita,DC=co,DC=uk'.,Microsoft.ActiveDirectory.Management
.Commands.SetADUser
Please help!

cls
Import-Module ActiveDirectory
Foreach ($Domain in (Get-ADForest).Domains)
#Performing Search Operation per Domain
$Objects = Get-ADObject -LDAPFilter "SamAccountName=dttestuser" -Server $Domain -Properties extensionAttribute8
Foreach ($Object in $Objects)
Set-ADUser $Object -clear extensionAttribute8
If anyone could tell me why removing the loop:
Foreach ($Object in $Objects)
And saying
Set-ADUser $Objects -clear extensionAttribute8
Errors I'd be interested. $objects only finds 1 object so having the loop makes no sense but it does seem to stop it error'ing!

Multiple GWIAs : multiple domains too or not?

First off, let me confess that this is near the end for our GW system. The reason for creating GWIAs in this manner is to migrate our users' email to another system via IMAP. We have ~6000 users and > 500GB of messages to move.
With that being said...
I have not been impressed with the GWIA and its ability to handle what is now "routine" message amounts. We were plagued with daily crashes (sometimes hourly) for months until we got a solution to impose the "imapreadlimit" switch in the GWIA configuration file. It has helped, but I doubt that in its current configuration, our current IMAP GWIA is able to cope with increased load. I am planning on building a few more GWIAs such that when it comes time to hit the button on the multiple-batch IMAP moves, we will have a half dozen or so GWIAs to handle the load. I am mostly concerned with the stability of the internet agents themselves, hence the large number of GWIAs. Novell's doc highly recommends to have the GWIA and domain to live on the same box, but it isn't required. I am faced with now creating a half dozen new domains (which also must sync changes between them and our main domain) in order to get more GWIAs. Or is this not really necessary?
With my concerns being primarily the GWIAs' stability, is having multiple domains not as necessary? If having multiple GWIAs on multiple systems, what is the preferred method of linking them to a single domain (shared SMB mounts?), and is this problematic if multiple GWIAs would have that share mounted and could be reading/writing to it simultaneously?

* nebben,
you don't need GWIAs for IMAP, the GW8 POAs can do IMAP.
http://www.novell.com/documentation/...a/ak8h81j.html
Uwe
Novell Knowledge Partner (NKP)
Please don't send me support related e-mail unless I ask you to do so.

Multiple domains

Hi,
Pls. bare with me as I don't know where to properly post this question.
Is it possible to assign multiple domain accounts in scot? for example sap1.com and sap2.com?
And is it possible to assign multiple mail host?

Hi,
Sorry I didn't get your suggestion. Kindly explain further. Thanks!

Multiple Domains on NWDI

Similar Messages

Maybe you are looking for