Multiple drafts of the same message appearing using IMAP

I have mail set to "Store draft messages on the server" as I use both mail and my iPhone to write emails, and sometimes continue a draft on my macbook that I started on the iPhone.
The weird thing is that in Mail creates multiple copies of the same draft periodically, and these remain after I send the message in the drafts folder. I have to manually go in and delete the 15 or so draft copies of the same email.
Leopard also did this and I had hoped the new version of Mail would fix the problem. Turning off "Store draft messages on the server" stops this behaviour, but then I wont have the tie in with my iPhone.
I use the IMAP service "Fusemail".
Anyone else have this issue?

Andrew N wrote:
I have mail set to "Store draft messages on the server" as I use both mail and my iPhone to write emails, and sometimes continue a draft on my macbook that I started on the iPhone.

Similar Messages

  • HT204053 When I try to login to my apple ID on my iphone 4 to use facetime, it will not work and tells me to check my connection?  I have even tried creating a new apple ID but the same message appears

    When I try to log onto my Apple ID to use facetime, it will not work and tells me to check my connection.  I have even tried creating a new apple ID but the same message appears.  I do not understand why this is happening, could anyone help me resolve this issue it is very frusterating that I can not enable facetime or imessage.

    I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

  • I cannot download Mavericks. Every time the file download stops a message appears that says the file is damaged and cannot be used to install Mavericks. I delete the file, download again and the same message appears. What can I do?

    I cannot download Mavericks. Every time the file download stops a message appears that says the file is damaged and cannot be used to install Mavericks. I delete the file, download again and the same message appears. What can I do?

    I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
    I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
    Edit: I just removed every project I have from the Media Browser. Still no luck.

  • Multiple alerts for the same Message ID

    Hi
    I have configured outbound ftp adapter. I have configured alerts inorder to capture any error in the adapter engine.
    Now,alert is triggered showing an error in the ftp adapter ( say incorrect ftp details). But i get multiple alerts for the same message ID several times. I have also set the parameter Max No od Delvs to 1 in the ALRTCATDEF transaction.
    I keep getting the same alert number of times a day. How can i restrict the number of alerts to 1 for 1 message ID.
    Regards,
    Vani

    Hello Andreas,
    Thanks for your reply.
    In my scenario i would need an alert per Message. That is the reason why I have not checked the option "Supress Multiple Alerts" since it would allow only alert per rule.
    Is there is any way we can get one alert per message.
    Also, after correcting the eror in the file adapter will the file which was not placed due to error in the adapter be placed automatically. I wanted to know what would happen to the lost file or unprocessed file since it dint reach the destination due to error.
    Regards,
    Vani

  • Help!  When I connect to itunes it tells me that required files are missing and please reinstall.  I have reinstalled and the same message appears.  Thanks. Windows XP

    Help!  I upgraded to 11 and it worked once. Now, when I connect to itunes it tells me that required files are missing and please reinstall.  I have reinstalled, I have deleted and reinstalled and the same message appears.  Thanks.
    Windows XP

    Meanwhile, I tried someone's suggestion to delete ITunes and Quicktime and reinstall both; still got the same mesage.

  • Hi, for the last week everytime i open firefox i get a message to download 36.0.4. I update firefox, restart an then the same message appears. What's going on?

    hi, for the last week everytime i open firefox i get a message to download 36.0.4. I update firefox, restart an then the same message appears. What's going on? What can I do?

    There is a new update available today for version 37, please do post back if this also happens for this update.
    Please update to the most recent version of Firefox:
    *[[Update Firefox to the latest version]]

  • When I wants to syncronize my foto's from my computer to my Ipad, Ik get the message  "itunes photprocessor was not installed correctly, please reinstall itunes, error 7"  When i did so, the same message appears again and again??????

    When I want to syncronize my photo's from my computer to my Ipad, I get the message  "itunes photoprocessor was not installed correctly, please reinstall itunes, error 7"
    When I did so, the same message appears again and again.
    Anyone knows the solution?
    Thanks on forhand.

    Repair Apple Application Support.
    START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

  • When installing ICloud 3.1 always the Same Message appears: You have more than 1 Outlook, it doesnt work. but i have only Outlook 2013, any idea?

    When installing ICloud 3.1 always the Same Message appears: You have more than 1 Outlook, it doesnt work. but i have only Outlook 2013, any idea?

    Did you have previous versios of Outlook before you installed 2013?

  • Can multiple devices with the same apple id use airdrop

    Can I use Airdrop between multiple devices sharing the same Apple ID?

    I don't know but somebody will reply if you bump this message.

  • I cannot log onto firefox. When I try I keep getting the same message: sorry for the crash shall we restart? When I click on restart the same message appears. I ried re-booting but the same message appears. Please help.

    Firefox might have crashed permanently, I don't know. I have tried repeatedly to log on but continue to get the same message "sorry we have crashed" I clicked re-start but the exact same message appears. Please help.

    Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    *Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all/
    If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
    *Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
    If you keep having problems then also create a new profile.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Contribute multiple instances of the same connection appear on login/start screen

    I am administering a series of sub-websites under one primary umbrella.
    - The Primary Umbrella site does not run under the Contribute Publishing Server
    - The secondary (child) sites are managed by the Contribute Publishing Server
    - We recently added a user to several of these subsites
    - After we added the user, we've had a problem with other user profiles.
    - Multiple instances of the same connection will appear upon login on the start screen ( about:startscreen ). However the user seems to only be able to credential to one of them, not both.
    I have gone into the user profile directory within Windows directory structure and removed both site dirs. However when restarting and reconnecting, both appear again.
    Anyone else have this issue and what is the remedy and fix?

    I tried to add a screenshot, however it would not let me upload.
    I get: An error occurred while trying to submit your post. Please try again.

  • How do you plot multiple curves on the same graph when using a while loop?

    I am writing a program that will plot the IV Output chracterisitcs curves for a MOSFET transistor. I have two sweep variables Vg and Vd. For each Vg valve selected, Vd is swept from its start to stop voltage creating a graph for that Vg valve. Both of the sweeps are done using while loops. Ideally I would like to display all of the Vg plots on the same graph while having the ability to do real-time graphing. Can anyone help me figure this problem out? I have attached my program. Thanks!!
    Tammy
    Attachments:
    outputfin2.vi ‏165 KB

    Hi Tammy & Tica T,
    As far as I see it - this thread is a very bad version of already existing bad version......
    http://forums.ni.com/ni/board/message?board.id=170&message.id=127857
    I expected, that an Applications Engineer from NI knows something about  a Transistor and how an Output characteristic looks like !!  Take a look to a typical Transistor Datasheet ( e.g. n-channel MOSFET) - you will see, that there is no relation of ID vs Time like in your example ( values vs time )  but  IDrain vs VDrain at different VGate's ( no relation to Mr. Bill Gates ).
    Find attached a vi, that in general does what you need - drawing of  curves vs x-axis (XY-graph in use)  - in test_sweep.zip.  And that you geet an impression, how it might be done ...... dynamic Output characteristic of a Transistor with Standard Equipment of a Lab ( Scope + Generator + Power Supply ) find in addition a Frontpanel - picture. One of the interesting points here is - the self-heating effect; visible on ch3 of scope - 5µs Pulse is already a very long time...... This measurement was done in order to compare with our own Transistors......... 
    Hope this helps a little bit to understand, what we are talking about.
    Regards
    Werner
    Attachments:
    test_sweep.zip ‏358 KB
    dynamic Transistor char.png ‏65 KB

  • Multiple instances of the same calendar events using Oulook and Desktop Manager

    BB Curve 8310
    OS 4.5
    Desktop Manager 5.0
    Theme = Dimension Today
     Outlook 2007 “full version”
    Using two POP3 email accounts. One is a personal gmail and the other is most important a business email. I do not use gmails calendar.
     12 Months or so back I would sometimes get duplicate appointments in my BB calendar after a sync but Outlook showed a single appointment. I had read that it was intermittent with the theme “Today” and the advice was “do not accept appointment invites in Outlook”.
     I forgot and accepted several I the past week. Now almost all my appointments are doubled up in my BB and again, my Outlook seems fine. I just noticed that I can now select which calendar to “show” in my BB.
     Is this caused by getting an email invite to an appointment?  
     1)   Does anyone know what is causing this?
    2)   Could you suggest a quick fix?
    3)   Could you suggest a permanent fix?
     Thanks
    Patrick
    Solved!
    Go to Solution.

    PatS wrote:
    Thanks Bifocals ,,,,, I'm blushing just a bit. I'd put one of those red smiley faces but I would have to post another question to find out how!
    BB Calendar CICAL = personal email
    BB Messaging CMIME = work email
    This is not correct the default services values need both reflect the main email associated account.
    They need to both be your work address. This could very well explain the duplicates
     Outlook has/uses only the work email address show it has to be the default one - I have long ago deleted my personal one from Outlook.
    Outlooks Calendar Data File recurrence (none) 339, in Outlook 2007 I had to find them a different way but I think it's what your looking for.
    My BB shows a "default" = 217, "personal" = 185, and "work" = 309
    The records in the device default calendar will not synchronize. The are in effect "orphaned"
    records that at one time belonged to an email address. Usually caused by deleting the email account or losing the service books for the email account. We need to remove them
    can you tell what email account they were created from? And where they would logically be moved?
    A couple of notes - now that you have had me flipping through different areas I have noticed a few interesting things that maybe would be beneficial. While using Outlook 2003, I used several email addresses. Don't know if Outlook updates to 2007 or installs a new 2007 program using data from 2003. There was a time that I was sending emails in Outlook from my personal account, there was a slight hiccup and every so often it would revert back, hence I simply deleted it.
    I would need to verify it, but I'm pretty sure that the email addresses would have to be installed again.
    I'll split that one with you. I'll take the Blackberry knowledgebase. You take the Microsoft outlook support site
    I'm now wondering if I delete all the calendars on my BB and do the one way sync? That seems simple enough.
    We are gong to do just that, to repair what happened. It will not prevent another recurrence.
     You  asked for three things:
    You wanted a a reason this happened, I think we found it in the default services setup.
    You wanted a quick fix, It will be done in with an  hour's work.
    You also wanted a permanent fix,  Want to go for all three?
    If you have multiple calendars you will have problems. It's just the nature of the beast.
    It's not an "if " but just a matter of "when" deal!
    Personally I can't find any logic in the concept of multiple calendars.
    People explain they use one for work appointments and one for personal appointments.
    I always want to ask why they don't use two watches one for personal and one for work?
    I do see the need for separating personal and work email accounts.
    Here is I think the best of both worlds answer.
    Leave your work email configured and use the work calendar as you would normally.
    For your personal email install the Gmail for mobile application. You have access to your
    personal and work emails, they are kept separate due to the nature of the Gmail app.
    Here is the the cherry on the top. The Gmail app doesn't install a calendar.
    So two email addresses one calendar, ain't life grand!
    So here is the plan Stan, let me know what you think.
    1) On the Blackberry options advanced options, default services. Match both options to your work email.
    2) Decide what needs to happen with the 217 device default "orphans".
    Also 185 personal records. Are they worth keeping, can they be sent to the work calendar, do they need to be on Outlook.
    3) Read this article you can see your options and  help you make the best decision.
     KB19240 How to merge multiple calendars into one calendar on the BlackBerry smartphone
    Read about the Gmail for mobile app see if you think it will work for you: Gmail mobile app
    If you don't like it or don't think it's a good fit just let me know and we can go a different way.
    Let me know what you want to do,
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • My iPhone continually shows me an Invalid SIM message or SIM Failure.  If I switch my phone off and then back on it works ok for a maximum of 10 mins, and then I get the same message appearing.  How can I resolve it?

    My iPhone 4S keeps on giving me an error message about my SIM Card.  It either tells me invalid SIM or SIM Failure.  The only way i can rectify this it to switch my phone off and then back on again, but this resolve only lasts for 10-15 Mins, and then the same error message appears.  Any ideas on the best way to rectify my alleged SIM card issues?
    Many Thanks

    i Had a simular issue years ago with my blackberry on ATT.  As it turned out, my SIM had some issues.  I would head over to your carrier and get a free sim replacement.   It could be a phone or SW issue, but the Sim is my first guess give my experience

  • I cant transfer my new purchase on my new ipad. I have 2 ipad. I have follow the procedure to go to store to authorize and it was successful but when I initiate the purchase transfer, the same message appear asking me to do the same thing.

    I have difficult transfering my purchases on my new ipad to my computer. I have 2 ipad. I have followed the instruction closely. That is to go to store and authorize
    my PC. It show it was successful as I still have not exceeded the 5. It shows 3 only. When I go to file to transfer the purchase, an error message appear telling to
    go to store and authorize the PC. I repeat this process but in vain. I am getting frustrated.

    Delete and redownload them if doing so is free in your country.
    (106637)

Maybe you are looking for

  • The QuickCode is invalid for YES_NO BEE Lines Element Entries

    Hi there While I am trying to create the batch in BEE for Oracle Payroll Element Entries I am getting fatal ERROR The QuickCode is invalid for YES_NO I have an element which has two input value one is Separate Payment and second is Tax Separately. Wh

  • Unable to Create a Domain in WLS

    Hi All, i have installed the WLS and when trying to install the oracle reports and forms 11g i am not able to create the Domain. Domain creation is failing. I found the following error ........................... WLS Versiom 10.3.2 [2011-08-18T15:31:

  • Urgent question about Thread-safety

    Hi all, the new tiger release provides an "isReachable()" method for the "InetAddress" object. I've found, this method is not thread-safe (see the source and output below). It returns true for all threads, when multiple threads using this method with

  • I cant save for web - please help me?!

    I cant save for web - please help me?!

  • OSB ftp reading same file multiple times in cluster

    We have 3 nodes osb cluster osb1,obs2, osb3 file based proxy is deployed to cluster with 'poll managed server' as osb1 and post read action as Archive We see same file is being read hundreds of times and archiving same hundreds of times Does anybody