Multiple duplicates of messages in my in box

i am getting duplicates (sometimes up to ten!!!) of the same messages in my in box and in my spam box. I am using Apple mail 2.0.7 and Tiger 10.4.6
I also have been using Spamseive and it has always been very reliable. The problem has been happening for a couple of days now.
I am also re-receiving emails that I have deleted from a few days ago....and then those show up as multiples also...
I removed all the rules in my MAIL accounts...there were only two. One to color the background of emails from Apple and one for my spamseive program.
This problem is only happening on my eMac G4. I have an iBook G4 running the same email set up and all is well on that one...so that leads me to believe it is not a problem on the message server but unique to the single machine.
I use POP mail to receive my Yahoomail account in Apple Mail.
Please help me
Thanks
Tim
emac   Mac OS X (10.4.2)  

Well, first of all, I'm not sure this is a problem in Mail. Too many people have reported it recently, and in all cases it's a Yahoo account.
The .backup file is a backup copy that (I believe) Mail does automatically every time you change your rules. I'd rather move it out of the Mail folder too.
Since you're using SpamSieve and it uses the rules file, it could interfere with troubleshooting this, so try the following procedure instead:
1. Quit Mail.
2. In the Finder, go to HOME/Library/Mail/.
3. Locate the Bundles folder and move it to the Desktop. The Bundles folder is where Mail plug-ins such as SpamSieve are installed. By moving it to the Desktop we're just disabling any 3rd party plug-ins you might have installed, including SpamSieve.
4. Locate MessageRules.plist within the Mail folder and move it to the Desktop. If there is a file called MessageRules.plist.backup, move it to the Desktop too. You may also see MessageSorting.plist files there. This is where Mail stored the rules in Panther, and they are no longer used in Tiger, so just move them to the Trash if you see them.
5. Launch Mail. You may want to go to Mail > Preferences > Junk Mail, enable junk filtering, and configure it however you wish. Consider shutting down the Internet connection before launching Mail to prevent it from downloading anything until the junk mail filter has been enabled.
If the above does not work, then you know the rules file has no bearing on this and you can move the files on the Desktop back to the HOME/Library/Mail/ folder (replacing any files Mail may have created automatically there) -- be sure to quit Mail before doing this.

Similar Messages

  • Multiple Duplicate Text messages received repatedly

    Quite often I get several duplicate Text messages of the same message. Drive my message count way up

    booyadan16 wrote:
    Ever sice the latest update I've been receiving at least 3 duplicates of every text that gets sent to me. Anyone else experiencing this or have any ideas on how to make it stop?
    It's actually been going on since well before the update. I have friends with other phones who have the same thing happen to them. One actually has a 'pre-smartphone' phone and they get multiples all the time. The problem is with some setting within Verizons network, which apparently they don't feel is that big of a deal. Only thing I've heard is to contact Verizon and tell them and they supposedly do someting to correct it for that user, but that's about it

  • Receiving multiple duplicate text messages since latest update

    Ever sice the latest update I've been receiving at least 3 duplicates of every text that gets sent to me. Anyone else experiencing this or have any ideas on how to make it stop?

    booyadan16 wrote:
    Ever sice the latest update I've been receiving at least 3 duplicates of every text that gets sent to me. Anyone else experiencing this or have any ideas on how to make it stop?
    It's actually been going on since well before the update. I have friends with other phones who have the same thing happen to them. One actually has a 'pre-smartphone' phone and they get multiples all the time. The problem is with some setting within Verizons network, which apparently they don't feel is that big of a deal. Only thing I've heard is to contact Verizon and tell them and they supposedly do someting to correct it for that user, but that's about it

  • Friends are receiving multiple duplicate messages

    After switching to Verizon from AT&T, my friends are reporting that when I send a text message, they will receive the same message two to four times in a row.  Sometimes a message will continue to repeat itself after x minutes.
    I know it is not the phone because I first had a Droid Razr and then switched to the HTC Trophy.  The problem occurs on both phone.
    I just got the Trophy today and straight out of the box, after activation my friends reported receiving multiple messages again. 
    I'm using the native text messaging app and have powered the phone off several times.  But again, since it happened with the Droid, it doesn't seem like it would be a phone issue. 
    Any thoughts of this would be great.

    Hi SonorousGiraffe & NATRAPS!
    I see how the duplicate text message problem can become aggravating.  I would like to assist with resolving.
    First, thanks to Ann154 for the great feedback & suggestion!
    There may be some resetting on the account we would need to do in order to resolve the duplicate text message issue.  If you are still experiencing this, please reach out to me directly so I can further assist.
    Thanks,
    AnthonyTa_VZW
    VZW Support
    Follow us on Twitter @VZWSupport

  • I use a gmail account for my mail.  When I send an email I sometimes get multiple duplicates (up to 10-12) of the same sent message saved in my sent file.  help

    I use a gmail account for my mail.  When I send an email I sometimes get multiple duplicates (up to 10-12) of the same sent message saved in my sent file.  help

    Did you check your user name and password in Settings>Mail,Contacts,Calendars...tap your email account, tap SMTP, then tap the primary server name.  Make sure the settings there are correct.

  • Multiple Duplicate Message Problem

    Each time I check my email, I appear to be downloading all my messages off my mail server as if they have not already been dlowloaded in the past, This means that I am getting multiple and incerasing numbers of duplicate email messages in my inbox. It has just started happening - is this a virus perhaps? Has anyone else had this happen to them??
    I am using mailk with btinternet (POP) - I have checked my server and only one copy exists there - it is as if the application seems to have lost the ability to tell the server that it already has specific messages...
    Any help or suggestions would be greatly appreciated...

    I read in another post (http://discussions.apple.com/thread.jspa?threadID=519926&tstart=30) that this is a problem with bt. On their broadband service status page there is the following entry:
    13 June 2006 01:54 PM
    Problem downloading multiple mail messages
    We are currently investigating a problem which may mean some customer are downloading multiple copies of messages from the server using a mail client. Please bear with us as we endeavour to resolve this problem as quickly as possible. Meanwhile we apologise for any inconvenience.
    So it looks like we will have to wait for bt to sort it out.

  • How Do I Get Rid Of Multiple Duplicates AND Relocate Numerous Files?

    Basically I'm fed up of iTunes.
    A couple of months ago, i had a problem with my itunes library due to a message regarding the iCloud. This practically deleted my whole iTunes library and forced me to relocate every single track, which took a lot longer than it needed to.
    I was already annoyed with iTunes by this point, until yesterday around 1/3 of my tracks were still unlocated, however I could cope with this because I had the majority of my songs, despite this not being ideal.
    Yesterday I was informed I needed to update my iPod, naturally I did. Then...this is when I start to get mad, my iPod crashed, then restored itself COMPLETELY back to factory settings, removing my songs and all my apps. I reopen my iTunes library to see that, that has also restored and NONE of my music is there.
    Now, after a bit of fiddling, I have an iTunes library full of songs which have been duplicated twice or even three times, to add to it, hardly any are actually located. It's not just as simple as redownloading from iTunes, because I expect half my library is music from CDs. So now not only am I faced with trying to get rid of all the duplicates, I also have to locate all the songs (I have checked the preferences and redirected it to My Music > iTunes - basically what it should be) and I have to get rid of all the songs that I didn't want in the first place such as old songs that should be long gone off my iPod/Library from now.
    If anyone could help, that would be great, because I'm so tired this time-consuming mess my iTunes has become.
    Thanks in advance!

    Broken Links
    It depends a bit on why things aren't where iTunes expects to find them but if they are in sensible Artist & Album folders in some common location then my FindTracks script should be able to reconnect them to iTunes. FindTracks uses some fuzzy matching routines and searches for multiple potential locations within a media folder. For more details see this thread.
    Duplicates
    Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
    Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created.  If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
    Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
    I intend at some point to improve DeDuper so that when there are multiple duplicates, where at least one is connected to a file while others are missing, it can throw away the entries to any missing files, however the current version needs all duplicates to have been repaired first.
    tt2

  • TS3276 Why am I receiving multiple duplicate emails and how do I stop this from happening

    Why am I receiving multiple duplicate emails after the initial message comes in, it keeps duplicating them. How do I fix this problem?

    For the mailbox where you are receiving duplicates ...
    Select the mailbox on the left of the Mail window.
    From the Mail menu bar top of your screen click Mailbox > Rebuild
    See if that helps the duplication issue.

  • Weblogic Message Bridge Producing Duplicate JMS Messages

    We have a message bridge that we use to integrate with TIBCO. The message bridge is deployed on a WL cluster. We see duplicate JMS messages produced by the bridge when it is deployed on the cluster. We don't see this behavior when only one ManagedServer in the cluster is active,.
    TIBCO version: 4.4.3 V5
    WLS: 10.3.3 with patch for bug BUG8732539 (BQC6)
    java -version
    java version "1.6.0_17"
    Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
    Oracle JRockit(R) (build R28.0.0-679-130297-1.6.0_17-20100312-2121-linux-x86_64, compiled mode)
    We are also seeing a lot of exceptions related to
    <May 27, 2011 4:11:57 PM PDT> <Warning> <Connector> <BEA-190032> << eis/jms/WLSConnectionFactoryJNDIXA > ResourceAllocationException thrown by resource adapter on call to ManagedConnectionFactory.createManagedConnection(): "javax.resource.ResourceException: Failed to start the connection ">
    However the bridge is active. We are monitoring the message-out count on TIBCO and we observed that we see duplicates whenever there a message is re-delivered. We opened a case with Oracle support and they suggested patch 10258751 which didn't help. The next suggestion was a patch for "Bug 11852771 - [WLS10.3.2]MISSING AND DUPLICATE IN JMS QUEUE MESSAGE MONITORING" but I don't think it will help since our JMS consumers are getting duplicate messages and this is not just a UI issue.
    Here is the message behavior when we send a single message:
    Timelines
    11:34:17 --> Message sent to TIBCO EMS queue
    11:34:17 --> WL MS3 throws an javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable exception
    11:34:17 --> WL MS1 says it got the message and committed the transaction
    11:34:17 --> Message is visible in the JMS queue in the admin console
    11:34:17 --> TIBCO EMS has still not received an ACK from WL for the message
    11:34:31 --> TIBCO EMS resends the same JMS message to WL
    11:34:31 --> WL MS2 says it got the message and committed the transaction
    11:34:31 --> WL MS1 throws an javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable exception
    11:34:31 --> Message is visible in the JMS queue in the admin console (At this point there are two messages in the JMS queue)
    11:34:31 --> TIBCO EMS has still not received an ACK from WL for the message
    11:34:54 --> TIBCO EMS resends the same JMS message to WL
    11:34:31 --> WL MS4 says it got the message and committed the transaction
    11:34:31 --> WL MS2 throws an javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable exception
    11:34:31 --> Message is visible in the JMS queue in the admin console (At this point there are three messages in the JMS queue)
    11:34:31 --> TIBCO EMS receives an ACK from WL for the message
    MS04
    ####<May 27, 2011 11:34:54 AM PDT> <Debug> <MessagingBridgeRuntime> <> <MS04> <[ACTIVE] ExecuteThread: '109' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-6A59E8FE76C4FC4CA149> <> <1306521294611> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) received message:
    JMS Message Class: TextMessage
    JMSMessageID: ID:MS01.4B044DDFEE1F1:25354AD
    JMSCorrelationID: null
    JMSDeliveryMode: PERSISTENT
    JMSDestination: Queue[SourceQueue1]
    JMSExpiration: 0
    JMSPriority: 4
    JMSRedelivered: true
    JMSReplyTo: null
    JMSTimestamp: 1306521256905 (Fri May 27 11:34:16 PDT 2011)
    JMSType: null
    Transaction Id: BEA1-6A59E8FE76C4FC4CA149
    <?xml version="1.0" encoding="UTF-8"?>
    <commands ...
    >
    ####<May 27, 2011 11:34:54 AM PDT> <Debug> <MessagingBridgeRuntime> <MS04> <MS04> <[ACTIVE] ExecuteThread: '109' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-6A59E8FE76C4FC4CA149> <> <1306521294611> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) successfully sent message:
    JMS Message Class: TextMessage
    Old JMS MessageID: ID:MS01.4B044DDFEE1F1:25354AD
    New JMS MessageID: ID:<193654.1306521294611.0>
    <?xml version="1.0" encoding="UTF-8"?>
    <commands ...
    >
    MS03
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257342> <BEA-000000> <Bridge MessageBridge1 Successfully got connection to the target destination>
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1: both source and target adapters support XA = true>
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1 supportsMDBTX = false supportsXA = true async = true>
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1 WorkMode = Exactly-once>
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntimeVerbose> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1 Entering processMessages() ------ >
    ####<May 27, 2011 11:34:17 AM PDT> <Error> <MessagingBridge> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-3AA29116A4CA622834EA> <> <1306521257343> <BEA-200015> <An error occurred in bridge "MessageBridge1" during the transfer of messages (java.lang.Exception: javax.resource.ResourceException: Failed to setup the Resource Adapter Connection for enlistment in the transaction, Pool = 'eis/jms/WLSConnectionFactoryJNDIXA', javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable
    javax.transaction.xa.XAException: Internal error: XAResource 'eis/jms/WLSConnectionFactoryJNDIXA' is unavailable
    at weblogic.transaction.internal.XAResourceDescriptor.checkResource(XAResourceDescriptor.java:948)
    at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:634)
    at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1227)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434)
    at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:117)
    at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
    at $Proxy62.receive(Unknown Source)
    at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
    at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
    at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:200)
    at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
    at $Proxy62.receive(Unknown Source)
    at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
    at $Proxy62.receive(Unknown Source)
    at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
    at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
    at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable
    javax.transaction.xa.XAException: Internal error: XAResource 'eis/jms/WLSConnectionFactoryJNDIXA' is unavailable
    at weblogic.transaction.internal.XAResourceDescriptor.checkResource(XAResourceDescriptor.java:948)
    at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:634)
    at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1227)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434)
    at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:117)
    at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
    at $Proxy62.receive(Unknown Source)
    at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
    at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
    at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1185)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434)
    at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:117)
    ... 8 more
    ).>
    ####<May 27, 2011 11:34:17 AM PDT> <Warning> <MessagingBridge> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257344> <BEA-200026> <Bridge "MessageBridge1" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was java.lang.Exception: MessagingBridgeException: Messaging bridge operation failed
    .)>
    MS02
    ####<May 27, 2011 11:34:31 AM PDT> <Debug> <MessagingBridgeRuntime> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-679AF074F381152F047C> <> <1306521271386> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) received message:
    JMS Message Class: TextMessage
    JMSMessageID: ID:MS01.4B044DDFEE1F1:25354AD
    JMSCorrelationID: null
    JMSDeliveryMode: PERSISTENT
    JMSDestination: Queue[SourceQueue1]
    JMSExpiration: 0
    JMSPriority: 4
    JMSRedelivered: true
    JMSReplyTo: null
    JMSTimestamp: 1306521256905 (Fri May 27 11:34:16 PDT 2011)
    JMSType: null
    Transaction Id: BEA1-679AF074F381152F047C
    <?xml version="1.0" encoding="UTF-8"?>
    <commands ...
    >
    ####<May 27, 2011 11:34:31 AM PDT> <Debug> <MessagingBridgeRuntime> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-679AF074F381152F047C> <> <1306521271392> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) successfully sent message:
    JMS Message Class: TextMessage
    Old JMS MessageID: ID:MS01.4B044DDFEE1F1:25354AD
    New JMS MessageID: ID:<196075.1306521271386.0>
    <?xml version="1.0" encoding="UTF-8"?>
    <commands ...
    >
    ####<May 27, 2011 11:34:54 AM PDT> <Error> <MessagingBridge> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521294610> <BEA-200015> <An error occurred in bridge "MessageBridge1" during the transfer of messages (java.lang.Exception: weblogic.transaction.RollbackException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
    javax.transaction.xa.XAException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
    at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
    at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
    at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
    at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
    at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
    at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
    at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
    ... 14 more
    at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1871)
    at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:330)
    at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:225)
    at weblogic.transaction.internal.TransactionManagerImpl.commit(TransactionManagerImpl.java:293)
    at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1534)
    at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
    at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
    javax.transaction.xa.XAException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
    at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
    at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
    at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
    at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
    at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
    at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
    at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
    ... 14 more
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1185)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
    at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
    at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
    at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
    ... 2 more
    ).>
    ####<May 27, 2011 11:34:54 AM PDT> <Warning> <MessagingBridge> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521294610> <BEA-200026> <Bridge "MessageBridge1" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was java.lang.Exception: MessagingBridgeException: Messaging bridge operation failed
    MS01
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-72BC818FE2BB8C2655C6> <> <1306521257536> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) received message:
    JMS Message Class: TextMessage
    JMSMessageID: ID:MS01.4B044DDFEE1F1:25354AD
    JMSCorrelationID: null
    JMSDeliveryMode: PERSISTENT
    JMSDestination: Queue[SourceQueue1]
    JMSExpiration: 0
    JMSPriority: 4
    JMSRedelivered: false
    JMSReplyTo: null
    JMSTimestamp: 1306521256905 (Fri May 27 11:34:16 PDT 2011)
    JMSType: null
    Transaction Id: BEA1-72BC818FE2BB8C2655C6
    <?xml version="1.0" encoding="UTF-8"?>
    <commands ...
    >
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-72BC818FE2BB8C2655C6> <> <1306521257542> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) successfully sent message:
    JMS Message Class: TextMessage
    Old JMS MessageID: ID:MS01.4B044DDFEE1F1:25354AD
    New JMS MessageID: ID:<195581.1306521257536.0>
    <?xml version="1.0" encoding="UTF-8"?>
    <commands ...
    >
    ####<May 27, 2011 11:34:31 AM PDT> <Error> <MessagingBridge> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521271384> <BEA-200015> <An error occurred in bridge "MessageBridge1" during the transfer of messages (java.lang.Exception: weblogic.transaction.RollbackException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
    javax.transaction.xa.XAException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
    at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
    at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
    at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
    at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
    at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
    at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
    at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
    ... 14 more
    at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1871)
    at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:330)
    at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:224)
    at weblogic.transaction.internal.TransactionManagerImpl.commit(TransactionManagerImpl.java:293)
    at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1534)
    at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
    at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
    javax.transaction.xa.XAException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
    at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
    at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
    at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
    at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
    at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
    at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
    at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
    ... 14 more
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1185)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
    at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
    at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
    at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    ... 1 more
    ).>
    ####<May 27, 2011 11:34:31 AM PDT> <Warning> <MessagingBridge> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521271384> <BEA-200026> <Bridge "MessageBridge1" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was java.lang.Exception: MessagingBridgeException: Messaging bridge operation failed
    .)>

    @Tom, thanks for your hints and sorry for my delayed response. Here are my answers to your queries…
    -- Does messaging work, without any exceptions, when only one bridge is active?
    It works fine when only one node of the cluster is active. -- I'm not familiar with Tibco monitoring, but I suspect that the "message-out count on TIBCO" stat doesn't always imply that there's a duplicate message. It could mean that an initial message delivery attempt failed, it's transaction rolled back, and the message was redelivered. Redelivery after a failure is normal - the original delivered message, if one actually made it onto a WebLogic queue, should be discarded by WebLogic when its failed transaction eventually rolls back (before its ever handed to a consumer application).
    You are absolutely right. The mismatch in count was due to redelivery attempts. We could see that as soon as we turned on trace in TIBCO-- The posted stack traces look like they may be JVM stdout/stderr scrapes, which are often automatically truncated, for example, see the "... 8 more" listed at the bottom of one of the stack traces below. There might be more information in the full stack trace for the "Resource manager is unavailable" exception. Full traces are logged in each WebLogic Server's log files.
    I tried redirecting the output and even set "stdout Stack Trace Depth:" to -1 but I am not albe to see the complete trace.-- The setTransactionTimeout NullPointerException error message looks like it is collateral damage from the original reported "Resource manager is unavailable" exception that's thrown earlier during the enlistResource() step. If you are truly getting duplicates, then I think this is a clue that the bridge is somehow (stupidly) trying to proceed with forwarding the message despite the fact that there's no current transaction on the thread...

    I have a case open with Oracle support and we have extensive debugging turned on. Here is what the engineer came back with. There is an issue with XA transactions in JCA adapter when it talks to third party providers like TIBCO. Since the resource names are not unique across the cluster, a XA transaction is started on multiple nodes in the cluster for the same message. All transactions abort but the message is persisted and TIBCO redelivers the message since the connection is severed when the transaction aborts. We were able to reproduce this scenario at will with our setup and Oracle was able to reproduce the issue too. 
-- Can you check the state of the message on the WebLogic Q? The fact that a message is shown on the WL console doesn't necessarily mean that the state of the message is visible (it could be waiting for the transaction to commit - something that apparently never happens). On the console: Services -> Messaging -> JMS Modules -> [module name] -> [destination name].

    Our consumer was getting duplicate messages. This confirms that the console was not giving us incorrect information. The console showed that 2/3/4 messages were in "current" state when we expected only one message.
-- Make sure that the bridge's Tibco destination is a Tibco queue not a Tibco topic (it's happened).

    Yeah we made sure it was a Queue.
-- Can you post your bridge and destination stanzas from your config.xml? 

    Will try to do this shortly but have to strip out lot of information.
-- I vaguely recall that there was a problem with untyped connection factories in Tibco at one point (not sure). You might want to try changing the Tibco configuration to spin-up "XA Queue Connection Factory" instead of just an "XA Connection Factory" (plus modify the bridge configuration accordingly).

    We tried this but it didn't eliminate this issue. One thing we did notice however was that the number of rollbacks were greatly reduced.

    Here is the workaround that Oracle is suggesting: Create pinned destinations and assign it to a distributed queue. This will keep the transactions local and hence eliminate the duplicate transactions and rollback. We tried it and it eliminated the dups issue. However I discovered another bug during my testing. Our cluster messaging mode is "Unicast" and message forwarding from zero consumer queues to queues with consumers fails. We have four/five nodes in the cluster and two consumer threads. I observed that the zero consumer queues always forward to one queue in the cluster that has consumers. The forwarding stalls when I bring down the node that has consumers. Again, we were able to reproduce this issue at will and Oracle has acknowledged that it is a bug. They've reported that Unicast fails without any warning whereas Multicast fails with a warning in the log. We have observed this message forwarding stalling even with UDQs.
    I have another case open for an issue where our message bridges that transfer messages from TIBCO to WLS stalls after sometime. The status is shown as active but it is not doing anything. The server instance shows stuck threads trying to roll back a message. TIBCO logs indicate that it is receiving a request to rollback a transaction but it is not finding the transaction to rollback. The only way to recover from this condition is to restart the cluster. I am fairly confident that he root case for this issue is again the XA transaction issue. I changed our UDQ to pinned destination in one environment and we are no longer seeing dups or bridge stalling there. Hopefully Oracle can resolve the message forwarding issue.Thanks again….

  • Multiple duplicates, but erasing deletes the only original file?

    HELP? i keep getting multiple duplicates, if i delete any of the duplicates, the original song is deleted in the itunes folder.
    so i am left with a whole bunch of duplicates but no original file. searched everywhere but cant find my music .
    i have now lost 200gb of my 1.5tb 25 year music collection. years of work? what am i doing wrong?
    this is not just cd i can buy again but music i and friends have made

    Command+A selects all items. Command+delete deletes the items, so I suspect it would delete all the files in that window, in other words I don't think it is what you want to do.
    Looking at this another way, there isn't any easy shortcut to deleting duplicates from iTunes.  The best way is to stay on top of duplicates as they are created and change how you do thing in iTunes so you do not create many duplicates.  Oh, there are scripts that will do this, but some things iTunes may say are duplicates are not.  I have one album where there are two tracks with the exact same name and artist but one version is unplugged.  iTunes just tells me they are duplicates.
    How to find and remove duplicate items in your iTunes library - http://support.apple.com/kb/HT2905
    http://dougscripts.com/itunes/itinfo/dupin.php (commercial)
    Posts by turingtest2 about different types of duplicates and techniques- https://discussions.apple.com/thread/3555601 and https://discussions.apple.com/message/16042406 (Note: The DeDuper script is for Windows)

  • Random duplicate text messages.

    I keep recieving duplicate random messages after upgrading to the iPhone 6.  Most of the time it is at the time i recieve a message or mms but it has happened where it can be many hours later.  I have recieved the same message up to 5 or 6 times in one or two cases.  Any idea why this might be happening?

        Happy Friday Traffalger! We're excited to partner with you and get the duplicate texts issue resolve once and for all. Are the duplicate coming from only one contact or multiple contacts? Do you have iMessage turned on? If so, trying turning iMessage off & retest. Let us know the results.
    Thank you…
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • Update to server info duplicate mail messages

    I changed the outgoing and the incoming server info.  Did not change the port numbers.  Do I need to do this?  I was able to send and receive but now I have duplicate messages in my in box!  How do I change this?  Am I doing this correct?
    thanks

    I was having this trouble as well. Yesterday I disabled the MobileMe account in Mail preferences (mac.com is my only email) and duplicate messages have stopped. The sidebar changes back to what I was used to in the last version of OS X (all the mobileme gunk is gone). So far so good.

  • IPod nano won't sync; dreaded "duplicate file" message

    Suddenly, my old but heretofore functioning iPod Nano won't sync radio podcasts. Gets the "duplicate file" message. I have tried resetting multiple times; reinstalled iTunes, changed the port, checked for plug-ins (no iToner) etc. Ran diagnostic; it fails the device sync test, saying no iPod touch found.
      I have seen some other complaints about this.
       Is there a solution? I have done most of the troubleshooting steps but did not restore iPod to virginity (hoping to avoid reloading songs onto it).
    Thanks in advance for any help.

    If you've read the Technical Specification you will find that the nano can only use Firewire for charging, not for syncing:
    http://www.apple.com/ipodnano/specs.html
    "Charging via USB or FireWire to computer system or power adapter (sold separately)"
    So you can rule that out.
    Have you tried the 5 R's?
    http://www.apple.com/support/

  • HA NAT and %IP-4-DUPADDR: Duplicate address messages

    Are the messages %IP-4-DUPADDR: Duplicate address expected with HA NAT? 
    With Stateful NAT they were seen if the "redundancy GROUP_NAME" was not added to the static NAT. 
    I am seeing them with a correctly configured HA NAT Box to Box set up and there does not seem to be anything missing that will stop the messages. 
    Is this a bug?  Should the duplicate IP messages have been suppressed?

    James,
    We have implemented it in 3 customers, all of them got the same crash problem (just 10 customers in the world opened a ticket with TAC and just opened 3 of them).
    It will happen a lot o times during the day. Be prepared. I didnt monitor the frequency but we needed to shut the secondary router down until Cisco do something to solve.
    Unfortunately this is becoming very common with Cisco softwares. Not only with routers and switches, but with others solution too.

  • Receiving multiple duplicate emails using Outlook 2010

    I am receiving multiple duplicate emails using Outlook 2010. The email receiving, can go up to few hundreds copies. Not
    all emails i receive will be duplicated. There is no common sender for those affected emails. Usually when i received email from my Outlook 2010 the email in Outlook Web Access will be gone. But this time round for those affected duplicating emails, it still
    can be found in the Outlook Wed Access. Any solution for this problem? Currently
    I would need to go into the Outlook Web Access to delete the affected email then the duplication will be stop. Or I would need to cancel the Send/Receive & restart Outlook. But this 2 method is only temporary solution. The problem will keep coming
    back. 

    Dear Jeremycny,
    I think you are working with a POP3 account and issue of replicated emails in Outlook is common in the case of POP3 connection. So, first of all uncheck the
    “Leave a copy of messages on the server” option and see the results.
    Also, see the TasK Manager, if there are multiple “Outlook.exe” are running under the
    “Processes” tab, then end the unnecessary programs as each of them downloading the same email multiple times.
    Apart from it, if there are numbers of factors behind the replication of emails in Microsoft Outlook such as:
    Rules (Exploiated Rules)
    Scanning Programs Integration
    Damaged Outlook Profile
    Robert’s have defined these bugs in a more profound manner in his blog, so take more help from the given source:
    http://www.howto-outlook.com/faq/duplicates.htm
    Note: Improve community discussions by marking the answers helpful otherwise respond back for further help.
    Thanks & Regards
    Clark Kent

Maybe you are looking for

  • Need a method to insert 1000 records in oracle in once

    Hi All, I want to insert more than 1000 records in oracle database in once. Please let me know the way to do this. It's urgent.......... Regards, Puneet Pradhan

  • Regarding restricted keyfigures

    Hi Gurus , can any one tell me about restricted key figures and steps in BI. How can we see which keyfigures are restricted navigation plz. Thanks Shilpa

  • Need Help :  How to make particular Record  in Bold

    Hi Frnds, I am facing the problem to resolve the following issue....... Plz... help me out ......... I am displaying the payslip information (Elements Information ) in a Table. In the table , i am showing the "DEDUCTIONS TOTAL"  , "EARNING TOTAL" and

  • Multiple SAP User Access Issue?

    Dear Expert, SQL Express 2005 Wndows Server 2003 Client PC RAM 1GB Server RAM 16GB SAP Version 8.8 PL15 14 Store Procedure When multiple user connected with SAP (Logedin) at that time any user add any SAP document then all remaining user hanged appro

  • Any reason to use synchronize in jee world ?

    Is there any reason why i should use synchronize method or statement in a jee application ? would appreciate an example if yes . thanks .