Multiple e-mail issues

Since I updated to firmware 1.1.1, I noticed I was not getting e-mail notifications. I checked my sound settings, and it was set to notify me of new e-mail. I then did a reset, and when I opened the mail application, it apparently had deleted all e-mails off all accounts, including sent e-mails. It then began to retrieve all e-mails off the server (about a week's worth)
As a result, I have lost all sent e-mails, and e-mails that go back in time past when they are stored on my mail server.
Has anyone else had problems with e-mail notification since the firmware update?
Also, has anyone else had all e-mails, including sent and received, deleted after a reset.
Thanks in advance.
Russell

You can get faster help by posting the Mac OS version you have and more details about your iMac. They have been in continuous productionsince 1998 with four distinct procesor families, and each ahve different troubleshooting steps. If you called a Ford dealer about a car problem, the first thing ithey will ask is "which Ford model and year?" Same deal here.
The processor description is found when you do "About this Mac" and will be a good start for identifying your iMac model; the Mac OSX will be there too.

Similar Messages

Adding multiple e-mail alias addresses to an account

Can someone please tell me how to add another e-mail address to my Mail account. I have tried using info from the Mail Help file, both "adding another account" and "adding multiple e-mail alias addresses to an account". Each time when I try to send a test message to or from the added e-mail address, I get the same message: "Cannot send message using the server mail.bellsouth.net. Use the Pop-up menu below to try a different outgoing mail server". The only pop-up is smtp .Mac.
I have tried both methods shown in the HELP file and get the same message. I would really appreciate your help.

Are you trying to add a second email account to Mail, or just add a second "(apparently) from" address to an existing account?
If the former, we need to know some more detail, like:
(1) who is the existing account, .mac or bellsouth?
(2) Which are you trying to add, .mac or bellsouth?
(3) I assume your ISP is Bell South?
(4) What are the names of the smtp servers and what are their respective smtp server port numbers?
(5) Are either of them using SSL on the smtp server?
(6) I don't remember whether Tiger Mail has it or not, but in Leopard Mail, on the menu bar under "Window" there is a selection "Connection Doctor." If applicable to Tiger Mail, what does it say about your connections?
(7) Which account can you send mail through and which one can't you send mail through?
(8) Are your receiving mail okay through either or both accounts? Which one(s)?
Now if you are trying to add a second "(apparently) from" address to an existing account, in Mail Prefs > Accounts > mail account > Email Address, just add a second email address separated by a comma like so:
[email protected], [email protected]
You could have an issue with bellsouth or .mac requiring the domain name in the apparently from email address to match the domain name of the smtp mail server.

Problems with multiple e-mail accounts on Droid 2 & also can't put phone into Silent mode

I just received my Droid 2 and having a problems with having multiple e-mail accounts.
My original droid worked fine with all of this.
I have 2 different personal e-mail accounts setup.
When I click e-mail, it just defaults to the default e-mail address and I have no way of switching accounts. I have to change the default e-mail account in order to view the other account.
Along with having a shortcut on the home page to each e-mail account, it always just goes to the default one and no way of adding a shortcut to both.
When I did this on the original droid, i could choose which e-mail account I wanted a shortcut for and could obviously have both on the home screen.
I also have found no way to NAME the accounts, ex. Comcast & Work.
That way I could distinguish the difference between the 2 on my home screen even if I could get a shortcut to both.
not sure how this could be overlooked but I sure dont think there is a way to make this happen.
Also, what is with 2.2 System and not allowing you to put it in silent mode?
I updated my original Droid to 2.2 and could no longer make it silent with the volume button on side or going into the sound settings and changing it to silent, it would always stay on vibrate.
And now it does the same thing with Droid 2. I cant make it silent at all.
Any ideas on either issue

becker800 wrote:
ok I got the silent problem fixed.
The update changed vibrate to be always, even when on Silent mode.
The e-mail problem however is stll an issue and I realy hope they release an update to fix this.
I'm sure I'm not the only one with 2 e-mail accounts on their droid.
I never had an original Droid, so I can;t compare to what was on that. For me, I am using the "Messaging" app - it seems to be set up for multiple e-mail accounts better than the email app. Messaging is the one recommended by the manufacturer - give that a try.

Apple Mail Issues After 10.10.2 Security Update

I've had outgoing mail issues in Apple Mail in Yosemite on my macbook pro consistently since the Yosemite update. I've tried multiple recommended fixes including deleting and resetting all accounts with the latest instruction from bluehost. Over the last several months, some "fixes" had seemed to work for a while, and then the problem would resurface. The "on the fly" fix is always to quit mail, cycle my wifi off and on, and then reopen mail, at which point, the hung-up emails all send and things work fine for some period of hours until the problem comes back.
Interestingly, the problem seemed to finally disappear on its own a couple of months ago! No problems for that period of time! UNTIL I updated my macbook pro with the latest Yosemite security update a couple of days ago. Now the problem is back with a vengeance!
Any help would be appreciated!

I have tried to quit mail and turn wifi on and off with no results whatsoever. This is really frustrating, I can't work!

Multiple E-Mail id entry in vendor master in ECC6.0

Hi,
I have one issue related to multiple E-mail address entry in ECC6.0. we upgreaded customer system from 4.6c to ecc6.0.
1. In 4.6c, we have the provision to enter multiple E-mail ids continuously with comma seperating each id in the e-mail address field of vendor master where as in ecc6.0 system will through error message"invalid e-mail id" if you try to enter more than one e-mail id in the e-mail address field because ecc6.0 validates e-mail address field where as 4.6c dont validate this field entries.You have to enter one mail id at a time in the e-mail address maintenance popup and keep on adding one by one to maintain more than one id.
2. So, what happens to the old vendor master records that were there in4.6c after upgrade. Do we need to change them to the compatible format with ecc6.0.If so, this is to be done manually one by one vendor master record or isthere a way to change all these records at time automatically.
3. Is there a readily available SAP Note for this?
Your help in this regard is much appreciated as this is an open issue in the upgrade process.
Thanks & Regards
Sundar

I ever experience the same thing when upgarade from 4.7 to ECC6.0.It's because the send mail protocol using SMTP interface (you can ask detail about SMTP with the basis guy).
in the vendor master email address per line, it cannot contain special character like comma, etc.
Maybe you already know , that you can put the mail address in the next line record, but it will take a lot of efford to change all the mail address for vendors.And I'm not sure which one is the best way to handle this.we handle it by bypass the checking for the special character considering the go live situation, so the old email address still remain the same, and can be maintain in the old way.
but in the future you better ask the vendor custodian team to maintain the email address per line (one email per record),then you can revert back the bypass check after that. maybe there's another way or method , but i dont have any clue, maybe others can share their experience also.
also you might face another issue for sending mail, we modify the logic to split the email address per comma.
Below is several notes, maybe it can helps
Note 721723 - Mail receipt: Error with special characters in addresses
Note 1016127 - SMTP mail: Error when addresses have special character

How can I display selected tags across multiple e-mail addresses?

I receive email on a specific topic but via several e-mail addresses. How can I view selected tags where the resulting e-mails span several (7) email addresses. They are all active on my Thunderbird, but as far as I know, I can only display the selected tag on one of them at a time.
Any assistance greatly appreciated as this is a very big problem for me.
thanks, Ron75

This solution does not appear to work across multiple e-mail addresses.
Perhaps I should have said "work across multiple e-mail address at the same time. I get e-mail on specific topics via several email addresses and wish to view all the tagged emails regardless of which email account in which they reside.
I could not get this solution to select more than one email account at a time.

Unity Connection Voice Mail Issue

Hi,
I have a weird Unity Connection Voice Mail issue and would appriciate any help i can get. Many thanks in advance.
I have Unity connection 7.0 and CUCM 7.0 integrated in a lab enviroment and here is what happens.
When I place a call internally say from 2001 to 2002, things work as expected, 2002 rings and it goes to voicemail where I can leave voicemail and listen to it from 2002.
However, if I place call from the PSTN to the same number 2002 (or any other number in other sites etc) the call again rings in 2002 and goes to voicemail, unity cnx plays the greetings for 2002 and says record your message as usual. Everything up to point is fine, then when the time on the PSTN phone is showing around 14 seconds into the call unity starts playing, "to send this message press one", if I press one nothing happens.
I have rebuilt unity and cucm, even just configured the bare minimum in the lab and still getting the same result. I tried calling from E1 connection and T1 connection but with the same results.
I have run out of ideas...
===============================
Here is a call trace from an internal call:
CallData, 1, CallerId=2003, CalledId=2002, RedirectingId=2002, Origin=16, Reason=4, CallGuid=8B7859FD6C16417A9A07F507418DD25B, CallerName=, LastRedirectingId=2002, LastRedirectingReason=4, PortDisplayName=PhoneSystem-1-001
Application, 1, 2003, AttemptForward
State, 1, 2003, State - AttemptForward.cde!Dummy
State, 1, 2003, Event is [NULL]
Application, 1, 2003, PHTransfer
State, 1, 2003, State - PHTransfer.cde!LoadInfo
State, 1, 2003, Event is [TrueEvent]
Application, 1, 2003, PHGreeting
State, 1, 2003, State - PHGreeting.cde!PlayGreeting
Display, 1, 2003, Call answered if needed
Display, 1, 2003, Playing greeting for Subscriber: hq2
Display, 1, 2003, No DTMF received
Display, 1, 2003, Playing greeting for Subscriber: hq2
State, 1, 2003, Event is [RecordMsgEvent]
State, 1, 2003, State - PHGreeting.cde!RecordMsg
State, 1, 2003, Event is [NULL]
State, 1, 2003, State - PHGreeting.cde!RunEditMsg
Application, 1, 2003, -->MessageEditing
State, 1, 2003, State - MessageEditing.cde!CheckMsgMenuOpt
State, 1, 2003, Event is [EditMessageMenuEvent]
State, 1, 2003, State - MessageEditing.cde!PlayEditMenu
State, 1, 2003, Event is [HangupEvent]
State, 1, 2003, State - MessageEditing.cde!CheckMsgLength
State, 1, 2003, Event is [ManyEvent]
State, 1, 2003, State - MessageEditing.cde!SendMsg
State, 1, 2003, Event is [TrueEvent]
State, 1, 2003, State - MessageEditing.cde!ConfirmSend
State, 1, 2003, Event is [HangupEvent]
Application, 1, 2003, <--MessageEditing
State, 1, 2003, Event is [HangupEvent]
Display, 1, 2003, Idle
Display, 1, , Dialing (MWI) '2002'
Display, 1, , Idle
and here is a trace from an external (PSTN) call
Trying 142.100.64.13, 5000 ... Open
CallData, 1, CallerId=911, CalledId=2002, RedirectingId=2002, Origin=16, Reason=4, CallGuid=CA3DFD90846C4FE7B0D68298A7698287, CallerName=PSTN Emergency, LastRedirectingId=2002, LastRedirectingReason=4, PortDisplayName=PhoneSystem-1-001
Application, 1, 911, AttemptForward
State, 1, 911, State - AttemptForward.cde!Dummy
State, 1, 911, Event is [NULL]
Application, 1, 911, PHTransfer
State, 1, 911, State - PHTransfer.cde!LoadInfo
State, 1, 911, Event is [TrueEvent]
Application, 1, 911, PHGreeting
State, 1, 911, State - PHGreeting.cde!PlayGreeting
Display, 1, 911, Call answered if needed
Display, 1, 911, Playing greeting for Subscriber: hq2
Display, 1, 911, No DTMF received
Display, 1, 911, Playing greeting for Subscriber: hq2
State, 1, 911, Event is [RecordMsgEvent]
State, 1, 911, State - PHGreeting.cde!RecordMsg
State, 1, 911, Event is [NULL]
State, 1, 911, State - PHGreeting.cde!RunEditMsg
Application, 1, 911, -->MessageEditing
State, 1, 911, State - MessageEditing.cde!CheckMsgMenuOpt
State, 1, 911, Event is [EditMessageMenuEvent]
State, 1, 911, State - MessageEditing.cde!PlayEditMenu
State, 1, 911, Event is [HangupEvent]
State, 1, 911, State - MessageEditing.cde!CheckMsgLength
State, 1, 911, Event is [NULL]
Application, 1, 911, <--MessageEditing
State, 1, 911, Event is [NULL]
State, 1, 911, State - PHGreeting.cde!AfterMsg
State, 1, 911, Event is [NULL]
Display, 1, 911, Idle

Sounds like one way audio from PSTN to your Unity Connection, couple of things to check:
1. ensure your protocols are bound properly on the GW, i.e. SIP/H323/MGCP
2. Make sure IP routing is OK between Unity and the voice gateway
HTH,
Chris

Setting up multiple e-mail accounts

I have iBook G4 using OS X. I've had it for over a year, but I've never set up multiple e-mail accounts, but now my kids are asking for their own e-mail addresses. There must be directions on how to do this somewhere, but I can't seem to find it. Any help in steering me in the right directions would be greatly appreciated.
Karen

Hello Karen.
You can create multiple email accounts with Mail with or without the same email account provider.
With the same provider is possible only if each account has its own user name.
You can create/access multiple email accounts that share the same incoming mail server and the same password as long as each account has its own user name.
An account's user name is usually the portion of the email address in front of the @ sign only but with some providers it is the entire email address.
Multiple email addresses with the same provider that share the same user name, incoming mail server and password as a primary email account are what is called an alias or aliases.
An alias email address to a primary account/address can be accessed with Mail under the primary account but not as a separate account with Mail.
If I haven't completely confused you, let me know.
I agree with Matt and strongly suggest/recommend that you don't allow your kids (regardless their age) or anyone else regular access to your Mac under your computer login admin account.
Check this link.
http://www.apple.com/macosx/features/family/

When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position. How can I get these multiple e mails prioritized?

When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position. How can I get these multiple e mails prioritized?

We are talking about the Mail app, right? In the Mail menubar, click on Window and then Previous Recipients:
That eliminates the previous recipients. If you are talking about the suggestions because there are 10 people with the name 'Steve' in your Contacts, then I do not know how to eliminate those unless you change the name slightly or wait until you type the last name or some other differentiator.

Using multiple e-mail addresses from cards in group listings

I have set up a group to send an e-mail to a bunch of people. Many of the recipients have multiple e-mail addresses. I know how to choose which of the contacts addresses to use, in the "edit distribution list", however I can not figure out how to use multiple addresses from a contacts card. This seems like it would be a pretty importannt function
Anybody know how to do this.
Mac OS X (10.3.9)

If a Group member has multiple email addresses and when addressing a message to the Group you want to send the message to all email addresses for that member, that member must be available in the Group for each email address that you want to include.
If a member has 3 email addresses and you want to include all 3 addresses when addressing a message to the Group, that member must be available 3 times in the Group and this can be done via copy and past for the member within the Group.
After doing so, use the Edit Distribution list selecting a different email address for each copy of that member.

HT2736 Can you gift a song to multiple e-mail addresses?

I want to gift a song to multiple e-mail addresses. Can I do that and how can I do that? Do I need to put a comma and space after each address? Also how many e-mail address Can I send the song to?

You can buy a song, an album, a video, an audiobook, a TV episode or season, a movie, or an application for anyone who has a valid email address. Once you purchase a gift, it will be delivered by email to the person or group of people you specified as the recipient(s).
Check this out for instructions on how to send to multiple emails and what the limit is:
iTunes Gift Options
http://support.apple.com/kb/HT2736

TS3899 How can i delete multiple e-mails from my iphone 4S. There are indicated more than 1500 e., but when i open the file there is indicated: no e-mail.

How can i delete multiple e.mails from my iPhone 4 S. ? It shows the presence of more than 1500 e-mails. But when I try to open the account it shows that there a no e-mails. So i cannot delete them.

I would disconnect the email on your phone...
And reconnect again and if it still does that go on an actual computer, log on and delete the mails with ease...
Hope this helps..it may just need to be refreshed...

Multiple App syncing issues...

Hello, all.
I am having multiple application synching issues. I have a half dozen devices and have never had any of these issues before about a week ago. May have had an iTunes update? Here are the issues.
1.     Some Apps re-installing even though no update was available.
2.     Some apps not completely installing and showing with an empty progress bar through the icon.
3.     Apps that are not supposed to sync to a particular device are.
4.     Apps re-installing outside of their designated folders.
Anyone having any of these issues? It is pretty frustrating since I never know what I am going to end up with after a sync.

Sure.
Only select the apps that you want to sync.
It will only sync what you tell it to sync to each device.

HT2500 can i have multiple e-mail addresses with one mac account

Can i set up multiple e-mail addresses on one mac account

You can have as many as you want. Add an account with Mail Preferences > Accounts. Click the "+" button.

Send AP payment advice e-mail to multiple e-mail addresses?

Hello all,
I implemented Business Transaction Event 2040 to determine whether a vendor payment advice should be paper or e-mail. The SAP code that populates the e-mail address from the vendor's master record only uses the first e-mail address, regardless of how many e-mail addresses are entered.
Have any of you found a way to send the e-mail to all of the addresses in the vendor master address table, ADR6, without making a modification to SAP's code? I tried putting multiple e-mail addresses in the first address field. The data validation that is being performed did not allow multiple addresses.
When I asked this question of SAP, their answer was that there's nothing wrong and that they would be happy to charge for remote consulting to provide that functionality.
I know that we could create a group e-mail address within our e-mail application for every vendor that wants the e-mail to be sent to multiple recipients. Then enter that group e-mail address in the first line of the vendor master e-mail data. I don't really want to do this because this would entail AP staff requesting to have that group set up and maintained by the staff that maintains the e-mail application.
Since we have the ability to enter multiple e-mail addresses for vendors, it seems like the payment advice e-mail that is generated should send an e-mail for every entry in the vendor master.
Thanks
Bruce

Anil,
We are using program RFFOUS_T to create the payment advice. Your solution of copying that program and modifying it would work. But I don't want to go to the time and trouble of doing that.
Because the volume of vendors that have multiple e-mail addresses is small, we'll just create group e-mail addresses in our e-mail application (Lotus Notes) and use that group e-mail address in the vendor master e-mail screen.
SAP doesn't consider this an error. At best it is a serious shortcoming. I have a hard time believing that I'm the first or only customer that has asked about and for this.
Thanks
Bruce

Multiple e-mail issues

Similar Messages

Maybe you are looking for