Multiple EasyVPN Remote sites using NEM

I am installing 2 ASA 5505s at home offices with dynamic IPs. The EasyVPN server is a ASA585x. I am using the 5505s in NEM mode. I configured a unique DHCP scope on each 5505. I have a dynamic crpto map on the server. I configured unique tunnel groups, group policies and usernames for each site on the server.
This seems to work fine.
Is it normal to configure unique tunnel groups, group policies and usernames for each remote site?

Hi,
I would say yes, since you have full control over each connection profile and group-policy. Usually one single connection profile and group-policy represent one single point of failure.
You could use the same username as long as you allow enough simultaneous logins with the "vpn-simultaneous-login" command under the group-policy settings.
Portu.
Please rate any helpful posts

Similar Messages

How to send job postings to multiple third party sites using the XML output

Dear Friends,
We are Implementing Irecruitment for our client, Client requirement is how can we send job postings to multiple third party sites using the XML output from i-Recruitment
With regards
Surya
.

Can you be more specific about your Requirement. In General, Please navigate to iRecruitment Recruiter Responisbility.
Then Select, Setup > Recruiting Sites. Here, you can configure your Third Party Websites information and attach stylesheets. The default mode oracle sends the vacancy information is HR-XML Format.
If you would like to select more sites information select "Add Another Row".
Then, you can see this information while "New Vacancy Creation Process".
iRecruiter.
Edited by: iRecruiter on Oct 18, 2009 7:43 AM

Attendant line status at remote site

we have a centralized 4.1.3 call manager with remote site using mpls. we set up the attendant application for the receptionist at the remote site and everything worked as expected. The next day, she no longer could see the line status.
I've tried it from the main site and it works fine. We've tried restarting the services.
Does anyone know what might have happened?
thanks
Rob

problem turned out to be the windows xp firewall running on the receptionist pc. when it was turned off, line status worked.
solution is to add the acclient program as an exception in the firewall settings
Rob

Multiple sites-Use both versions?

I have 3 domains, removed into separate folders. I have backed these up.
1. School domains-1 active classroom site/1 from last year I copy entries from
2. Teacher Support domain-a site I created to help teachers at my school
3. Personal site with photos
Using “Open With” I upgraded the personal site to 2.x. IWeb 2.x is great for photos. When I upgraded the domain using 2.x it works fine.
I can’t convert #2 above, as it is made with an 11Mystics theme and the blogs just disappear. The entries show in iWeb, but the main blog page with the RSS feeds is empty. I have yet to try deleting the RSS folder and republishing. Using 11Mystics beta for my theme and installing themes and thumbnails doesn’t work well.
I would be happy leaving #1 & 2 in iWeb 1.x, but when I publish one will render just fine in the browser and the other always gets the error page. Sometimes they alternate.
Has anyone been successful publishing multiple sites using both? Are there any 11Mystics users who have been successful in upgrading? I’m using Aerolite Silver. Thank you for your time.

I'm publishing to .Mac Thanks for the information. I may give it another try. I effectively do as you do. I have an iWeb folder that has folders for each website. One will have a regular 2.x domain - the other will open the domain with iWeb 08.
I'd convert everything, but I put so much work into my resource site (06 version)
http://web.mac.com/dontruett/iWeb/RSTchr/Home/Home.html
I could duplicate all of the theme pages I tweaked and use them in 2.x, but for the disappearing blogs. I may try deleting the RSS folder from iDisk and publishing again in 08. It's just so time consuming to experiment with 3 domains, then revert back, as publishing takes forever.

Is it possible to have multiple search results page using one Search Enterprise Center site?

Hi,
We're using SharePoint 2013 and I'm trying to modify the search results page for one site collection. By default, it uses the search results page from the parent site which is the search center being used by default for the web application. I need to make
sure that the site collection will only retrieve search results within the site collection (search everything has to be disabled). I found a way but I had to create another search center site to accomplish this, otherwise, it will affect the search center
site of all other site collections on the web app.
Now is it possible to have multiple search results page using one Search Enterprise Center site?

Hi,
According to your description, you want to retrieve the search results within the site collection.
As a workaround, you can create a custom result source for the site collection and you will retrieve the search result within the site collection.
More information about how to create result source in SharePoint 2013, please refer to :
http://technet.microsoft.com/en-us/library/jj683115(v=office.15).aspx
http://techmikael.blogspot.com/2013/04/limiting-search-results-in-sharepoint.html
Best regards

I am trying to use firefox as the web lauch for citrix ica but when I go to login into remote site - I get the message waiting to find website but it nver finds the website. Has anyone else had this problem?

I am trying to use firefox as the web lauch for citrix ica client but when I go to login into remote site - I get the message waiting to find website but it nver finds the website. Has anyone else had this problem?
When I installed firefox, it asked if I wanted to use safari settings and I said yes but I think this might be causing the problem. Safari is no longer compatible with citrix ica client. When I reinstalled firefox it automatically installs the safari info. Does anyone know how to re-install firfox without installing safari info?

Did anyone ever suggest you reset your PRAM?
http://docs.info.apple.com/article.html?artnum=2238
Also might want to try resetting the SMC, although I
doubt there's an issue there.
http://docs.info.apple.com/article.html?artnum=304123
I'm getting tired of people who supposedly know what
they're doing simply guessing that resinstalling the
OS might solve the issue. It's like trying to dissect
a frog with a sledge hammer, and wondering why you
didn't learn anything about anatomy in the process.
These sorts of things, although bizarre, should be
(and probably are) fixable without major surgery.
Thanks for the suggestion... but I think my first question would be why these parameters would need re-setting? This is a new machine... It has never been shut down hard. It is used at most 10 hours per week... mostly using Office 2004 for MAC. I need to figure this out as I will soon need it as a Cs2/CS3 - Aperture workhorse.
I too agree that it is best not to use a sledge when a scalpel is needed... but as a novice to the MAC world I may have been misled by Apple support. I seems to have fixed the symptoms ( some) but appears NOT to have addressed the cause... which is what I am after.
Would TechTool Pro detect a bad HD or RAM?
Thanks....

Deploying multiple WLANs at a remote site

At Site-A where the WLC4200 & DHCP server reside, we have the following subnets:
- (vlan10) 10.10.10.0
- (vlan11) 10.10.11.0
Each VLAN corresponds to a dynamic interface on the WLC ("Int-10" & "Int-11") which is assigned to their own respective WLAN. Works fine.
At remote Site-B where we have a 1242 (HREAP), we have the following subnets:
(vlan100) 10.20.14.0
(vlan101) 10.20.15.0
If I want to assign vlan100 & vlan101 to their own respective local WLANs, will I need to create vlans 100 & 101 (define subnets 20.14 & 20.15 on my Site-A layer-3 switch) at Site-A?
I ultimately want to create 2 WLANs at the remote site, one for voice (w/ QOS enabled) and one for data. The problem I keep running into is, the remote wireless clients authenticate but are unable to get a DHCP address.

You need not create sepearate VLANs 100 and 101 on the site-A. Make sure the DHCP server is reachable. Ensure that IP helper pointing to your DHCP server is configured on the router at the remote site so that DHCP broadcast is from your client is forwarded to DHCP server. Refer http://www.cisco.com/en/US/docs/wireless/controller/4.0/configuration/guide/c40hreap.html for more information.

Best Practice for SRST deployment at a remote site

What is the best practice for a SRST deployment at a remote site? Should a separate router such as a 3800 series be deployed for telephony in addition to another router to be deployed for Data? Is there a need for 2 different devices?

Hi Brian,
This is typically done all on one ISR Router at the remote site :)There are two flavors of SRST. Here is the feature comparison;
SRST Fallback
This feature enables routers to provide call-handling support for Cisco Unified IP phones if they lose connection to remote primary, secondary, or tertiary Cisco Unified Communications Manager installations or if the WAN connection is down. When Cisco Unified SRST functionality is provided by Cisco Unified CME, provisioning of phones is automatic and most Cisco Unified CME features are available to the phones during periods of fallback, including hunt-groups, call park and access to Cisco Unity voice messaging services using SCCP protocol. The benefit is that Cisco Unified Communications Manager users will gain access to more features during fallback ****without any additional licensing costs.
Comparison of Cisco Unified SRST and
Cisco Unified CME in SRST Fallback Mode
Cisco Unified CME in SRST Fallback Mode
â¢ First supported with Cisco Unified CME 4.0: Cisco IOS Software 12.4(9)T
â¢ IP phones re-home to Cisco Unified CME if Cisco Unified Communications Manager fails. CME in SRST allows IP phones to access some advanced Cisco Unified CME telephony features not supported in traditional SRST
â¢ Support for up to 240 phones
â¢ No support for Cisco VG248 48-Port Analog Phone Gateway registration during fallback
â¢ Lack of support for alias command
â¢ Support for Cisco UnityÂ® unified messaging at remote sites (Distributed Exchange or Domino)
â¢ Support for features such as Pickup Groups, Hunt Groups, Basic Automatic Call Distributor (BACD), Call Park, softkey templates, and paging
â¢ Support for Cisco IP Communicator 2.0 with Cisco Unified Video Advantage 2.0 on same computer
â¢ No support for secure voice in SRST mode
â¢ More complex configuration required
â¢ Support for digital signal processor (DSP)-based hardware conferencing
â¢ E-911 support with per-phone emergency response location (ERL) assignment for IP phones (Cisco Unified CME 4.1 only)
Cisco Unified SRST
â¢ Supported since Cisco Unified SRST 2.0 with Cisco IOS Software 12.2(8)T5
â¢ IP phones re-home to SRST router if Cisco Unified Communications Manager fails. SRST allows IP phones to have basic telephony features
â¢ Support for up to 720 phones
â¢ Support for Cisco VG248 registration during fallback
â¢ Support for alias command
â¢ Lack of support for features such as Pickup Groups, Hunt Groups, Call Park, and BACD
â¢ No support for Cisco IP Communicator 2.0 with Cisco Unified Video Advantage 2.0
â¢ Support for secure voice during SRST fallback
â¢ Simple, one-time configuration for SRST fallback service
â¢ No per-phone emergency response location (ERL) assignment for SCCP Phones (E911 is a new feature supported in SRST 4.1)
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps2169/prod_qas0900aecd8028d113.html
These SRST hardware based restrictions are very similar to the number of supported phones with CME. Here is the actual breakdown;
Cisco 880 SRST Series Integrated Services Router
Up to 4 phones
Cisco 1861 Integrated Services Router
Up to 8 phones
Cisco 2801 Integrated Services Router
Up to 25 phones
Cisco 2811 Integrated Services Router
Up to 35 phones
Cisco 2821 Integrated Services Router
Up to 50 phones
Cisco 2851 Integrated Services Router
Up to 100 phones
Cisco 3825 Integrated Services Router
Up to 350 phones
Cisco CatalystÂ® 6500 Series Communications Media Module (CMM)
Up to 480 phones
Cisco 3845 Integrated Services Router
Up to 730 phones
*The number of phones supported by SRST have been changed to multiples of 5 starting with Cisco IOS Software Release 12.4(15)T3.
From this excellent doc;
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps2169/data_sheet_c78-485221.html
Hope this helps!
Rob

WLC 5508 and remote site (DMVPN) Access Points

Hi All,
We just purchased a WLC 5508 and would like to know if it will control remote VPN site Access Points. Here are the details:
The 5508 will live at our home office. We have multiple remote sites that are connected via Cisco's DMVPN. Each site has one Cisco 1131 Access Point hanging off of either a Cisco 1841 or a 2811 that is using DMVPN back to the home office 2811. Can the 5508 manage the remote Access Points?
Thanks for your help guys!

Are you are talking about OfficeExtend?
Cisco OfficeExtend
https://www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns430/solution_overview_c22-523307_ns348_Networking_Solution_Solution_Overview.html
OfficeExtend supports 1130 & 1140 as long as you have the Wireless PLUS (WPLUS) Software.
OfficeExtend Access Point
http://www.cisco.com/en/US/docs/wireless/wcs/6.0/configuration/guide/6_0apcfg.html#wp1069890

How to prevent computers to logon remote site's domain controllers

Hi,
We have 3 sites (HQ, remote site A and remote site B) in a Windows 2008 r2 domain, the clients are win XP and win 7, if remote site A's DC and HQ's DC are offline, we don't want remote site B's DC to authenticate
remote site A and HQ client, how to prevent remote site B's DC to authenticate remote site A and HQ client except remote site B local client?
Regards,
Ray NG.

You might consider configuring ACLs on your firewalls and network equipment to filter this traffic. However, the idea of having multiple DCs is to have HA while in this case you are trying to avoid having benefit of this feature. For Windows clients, they
will keep using cached credentials as long as they cannot reach a DC for authentication.
If you would like to configure ACLs to achieve that, please do not restrict the communication between the DCs themselves.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

Multiple Apple Remotes no longer work with Apple TV!

I've been using Apple TVs since the minute Steve Jobs introduced them in 2007. I bought the 2nd and 3rd Generation Apple TVs the minute each of them were introduced. I've been watching every Apple Keynote Address since they were available online or on CDs from the early 1990s, on my HDTV via my latest Apple TV when that was possible. I watch far more TV through my Apple TV than via my Cable Box, much of it music and music videos from iTunes on my 2006 Mac Pro! But as of YESTERDAY I am seriously thinking of getting another, ANY OTHER manufacturer's similar internet streaming box!!!
WHY??? Because YESTERDAY, for no apparent reason except some programmer's or software engineer's stupidity, my Apple TV stopped working with all but ONE of my Apple REMOTES!!!
Why is that stupid? Because, in my household there are three people who use Apple TV all day, and each of them have an aluminum Apple Remote which they all use to control what the Apple TV is streaming. We have two other Apple Remotes lying around in case one of us misplaces his or her Apple Remote, which happens occasionally. ALL FIVE of the Apple Remotes, just like the beige plastic Apple Remotes that they replaced, always worked with all three of my Apple TVs! Then yesterday, suddenly, only the LAST Apple Remote that was paired with this 3rd Generation Apple TV is able to control it.
I've spent HOURS trying to fix this. This wasn't caused by an Automatic Update to the Apple TV's iOS; there has been no update in recent days. I've got Automatic Update turned on, just as I, a good Apple citizen, have my Apple TV set up to automatically send back Usage Data to Apple. I've rebooted my Apple TV. I've put brand new 2032 button batteries into my Apple Remotes. I pulled the power cord out of my Apple TV for 15 seconds and again for five minutes and then restarted it. As per instructions, I have Unpaired and re-Paired each and all of my 5 Apple Remotes. All to no avail. Only the last Apple Remote that was paired with the Apple TV works! Horrible. And STUPID, if it was a deliberate programming decision and it was introduced in a minor automatic update.
Worse, I've been using the Remote app on my 5th Generation iPod touch to replace ONE of the unusable Apple Remotes, and as of a couple of minutes ago even THAT stopped working with my Apple TV! Well, I was able to fix that fairly easily by pairing the iPod touch Remote app with my Mac Pro and then pairing it again with my Apple TV. But I don't think that solution would be so easy for many non-technologically-inclined users. I also don't think that a $200 or $300 iPod touch is a very acceptable replacement for a $20 Apple Remote, especially since everyone buys iPod touches for totally different uses (I use mine primarily for taking notes using voice-activated audio or video -- it is by far the best device for that purpose out there -- police departments should take note).
I'm hoping that this multiple Apple Remote problem somehow resolves itself, unless it is a hardware problem with my Apple TV. If so, I can hold out until Apple's media event next week, which I HOPE will premiere a new 4th Generation Apple TV, hopefully which will once again allow my five Apple Remotes to all control my Apple TV interdependently, without having to Unpair and Pair each one each time you wanted to use it, requiring you to quit whichever Apple TV app you were using each time, or alternatively to use Sneaker-Net to deliver the one working Apple Remote to each person who wants to use it, which can be difficult since at least one of the users is very ill! (Whew! A long sentence. But I hope you get the point.)
Two days ago, I could never have imagined myself getting a Roku or an Amazon, Sony, Microsoft or some other streaming device. It just proves how fast a stupid little decision (if it was deliberate) can turn EVERYTHING around!

People have a misconception with remote pairing (as does the description on this page -> Pairing your Apple Remote with your computer - Apple Support).
The 1st paragraph is incorrect.
The 2nd paragraph is correct.
"If you have several Mac computers or an Apple TV that use the Apple remote, or other devices with integrated infrared ("IR") receivers in one room, you can "pair" your Apple Remote with a specific Apple device so it doesn't interfere with other Apple devices or IR devices nearby.
Pairing allows you to set the receiving Apple device so that only it can be controlled by one remote. Learn how to pair your Apple Remote"
Pairing sets the device to read only a specific remote.
It does not set a specific remote to work only with a specific device. ie. if you point th remote at another Apple device (that is not paired) it will control it.

Internet connexion problem for remote site in Site to site VPN asa 5505

Hi all
I'm configuring a site to site Ipsec VPN in 2 sites using ASA 5505 V 8.2, The VPN is working fine i can ping machine in the 2 sides but the problem is the remote site dont' have internet.
The architecture is, we 2 site Site1 is the main site and Site2 is secondary site there will be Site3, ...
The internet connection is based in Site1 and site2 and site 3 will have internet connection through Site1. Site1, Site2 and Site 3 is interconnected by Ipsec VPN.
Here is my ASA 5505 Configuration :
SITE 1:
ASA Version 8.2(5)
hostname test-malabo
domain-name test.mg
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd ta.qizy4R//ChqQH encrypted
names
interface Ethernet0/0
description "Sortie Internet"
switchport access vlan 2
interface Ethernet0/1
description "Interconnexion"
switchport access vlan 171
interface Ethernet0/2
description "management"
switchport access vlan 10
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 41.79.49.42 255.255.255.192
interface Vlan10
nameif mgmt
security-level 0
ip address 10.12.1.100 255.255.0.0
interface Vlan171
nameif interco
security-level 0
ip address 10.22.19.254 255.255.255.0
ftp mode passive
dns server-group DefaultDNS
domain-name test.mg
object-group network LAN-MALABO
description LAN DE MALABO
network-object 192.168.1.0 255.255.255.0
object-group network LAN-BATA
description LAN DE BATA
network-object 192.168.2.0 255.255.255.0
object-group network LAN-LUBA
description LAN DE LUBA
network-object 192.168.3.0 255.255.255.0
access-list interco_1_cryptomap extended permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0
pager lines 24
mtu inside 1500
mtu outside 1500
mtu mgmt 1500
mtu interco 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp permit any inside
icmp permit any outside
icmp permit any interco
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
nat (interco) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 41.79.49.1 1
route interco 192.168.3.0 255.255.255.0 10.22.19.5 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map interco_map0 1 match address interco_1_cryptomap
crypto map interco_map0 1 set pfs group1
crypto map interco_map0 1 set peer 10.22.19.5
crypto map interco_map0 1 set transform-set ESP-3DES-SHA
crypto map interco_map0 interface interco
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto isakmp enable interco
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.1.0 255.255.255.0 inside
telnet 10.12.0.0 255.255.0.0 mgmt
telnet timeout 30
ssh 192.168.1.0 255.255.255.0 inside
ssh 10.12.0.0 255.255.0.0 mgmt
ssh timeout 30
console timeout 0
management-access interco
dhcpd option 3 ip 192.168.1.1
dhcpd address 192.168.1.100-192.168.1.254 inside
dhcpd dns 41.79.48.66 8.8.8.8 interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password eY/fQXw7Ure8Qrz7 encrypted privilege 15
tunnel-group 10.22.19.5 type ipsec-l2l
tunnel-group 10.22.19.5 ipsec-attributes
pre-shared-key *****
isakmp keepalive threshold 60 retry 5
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect dns
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect snmp
inspect icmp
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:5aa0d27f15e49ea597c8097cfdb755b8
: end
SITE2:
ASA Version 8.2(5)
hostname test-luba
domain-name test.eg
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
description "Sortie Interco-Internet"
switchport access vlan 2
interface Ethernet0/1
description "management"
switchport access vlan 10
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.3.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 10.22.19.5 255.255.255.0
interface Vlan10
nameif mgmt
security-level 0
ip address 10.12.1.101 255.255.0.0
ftp mode passive
dns server-group DefaultDNS
domain-name test.eg
object-group network LAN-MALABO
description LAN DE MALABO
network-object 192.168.1.0 255.255.255.0
object-group network LAN-BATA
description LAN DE BATA
network-object 192.168.2.0 255.255.255.0
object-group network LAN-LUBA
description LAN DE LUBA
network-object 192.168.3.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.3.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.3.0 255.255.255.0 192.168.1.0 255.255.255.0
pager lines 24
mtu inside 1500
mtu outside 1500
mtu mgmt 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside) 0 access-list inside_nat0_outbound
route outside 0.0.0.0 0.0.0.0 10.22.19.254 1
route outside 192.168.1.0 255.255.255.0 10.22.19.254 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map0 1 match address outside_1_cryptomap
crypto map outside_map0 1 set pfs group1
crypto map outside_map0 1 set peer 10.22.19.254
crypto map outside_map0 1 set transform-set ESP-3DES-SHA
crypto map outside_map0 interface outside
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 10.12.0.0 255.255.0.0 mgmt
telnet timeout 30
ssh 192.168.3.0 255.255.255.0 inside
ssh 10.12.0.0 255.255.0.0 mgmt
ssh timeout 30
console timeout 0
management-access outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password eY/fQXw7Ure8Qrz7 encrypted privilege 15
tunnel-group 10.22.19.254 type ipsec-l2l
tunnel-group 10.22.19.254 ipsec-attributes
pre-shared-key *****
isakmp keepalive threshold 60 retry 5
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:185bd689118ba24f9a0ef2f7e80494f6
Can anybody help why my remote site can't connect to Internet.
REgards,
Raitsarevo

Hi Carv,
Thanks for your reply. i have done finally
i used no crypto ipsec nat-transparency udp-encapsulation in my end router only.
and in remote access VPN i have enabled UDP for client configuration. the most imprtant is i have given IP add of same LAN pool to VPN user,
Regards,
Satya.M

One WLC for Headquarter and Remote Site

Hi
I have a question about the WLC remote deployment.
We have the following design at the moment:
Headquarter
- Network 192.168.49.0 /24
- WLC 4402 Version 4.2.61.0
-- 3 x LAP1252
-- Layer 3 LWAPP
-- SSID wep
-- SSID wpa
- Windows PDC with Active Directory, DHCP Server and local Data Storage
- ACS Version 3.2 for TACACS and RADIUS authentication --> External DB to Active Directory
Remote Site
- Network 192.168.50.0 /24
- 2 x LAP1252
-- SSID wep
-- SSID wpa
- Windows PDC with Active Directory, DHCP Server and local Data Storage
- ACS Version 3.2 for TACACS and RADIUS authentication --> External DB to Active Directory
Connection between Headquarter and Remote Site
- 2 Mbit ADSL
The problem is, that the wireless clients on the remote site get an ip address out of the headquarter DHCP Range 192.168.49.0 /24. The users on the remote site
most of the time only use the local data server in the remote office. With the actual design the hole traffic is switched over the 2 Mbit ADSL connection the the
WLC in the headquarter and back to the remote site. That works but it is not that performant.
The problem could be solved with HREAP, but what I think is, that it is not possible to have the same SSID at headquarter and remote site with different VLANs.
How can I achieve, that the clients on the remote site connect to the same SSID (wep or wpa), get an ip address from the remote site DHCP server (192.168.50.0)
and the traffic is switched localy.
I hope you understand what the problem is.
Thanks in advance for your help!

Yes, putting the remote AP's in HREAP mode will allow the same WLANs to be available on the AP's but the traffic would be locally switched at the AP instead of being tunneled back to the controller. After you put the AP in HREAP mode you then would configure which VLAN you want traffic for each WLAN to be dumped onto for that AP.

Load Data from Remote site

Hello every one,
I tried to load the data from remote site to stagging area with DB link, i used append hint and it gave this error, I was just wondering?
ERROR at line 1:
ORA-12840: cannot access a remote table after parallel/insert direct load txnORA-06512: at "JAMES.PKGCONVERSION", line 464
any help please thank you
i am not using all the columns, i am using selec in the insert. Thank you in advance
Message was edited by:
user553284

I had commit after three inserts, I changed commit after each insert, it is working now,
Does that really matter?
Any idea please.
Thank you

Problems calling remote site

I have a problem making a call from Isle of Man that has a 2900 router running CME 8.6 and a remote site Singapore that is on a UCS560, we have created a site to site VPN and can ping from either phone vlan to either phone vlan interfaces. The problem is that when I call from the Isle of Man site the call routes, rings on the remote phone and the user answers, they can hear the Isle of Man but the Isle of man cannot hear them... I hear you all say one way voice must be routing, well I cannot find where the error and like I say we can ping. I have added the singapore config as a starting point and we are calling from 0977 Isle of Man to 3123 Singapore.
version 15.1
parser config cache interface
no service pad
no service timestamps debug uptime
service timestamps log datetime msec localtime
service internal
service compress-config
service sequence-numbers
hostname SG_UC_560
boot-start-marker
boot system flash:/uc500-advipservicesk9-mz.151-4.M6
boot-end-marker
no logging buffered
no logging rate-limit
aaa new-model
aaa authentication login default local
aaa authentication login sdm_vpn_xauth_ml_1 local
aaa session-id common
clock timezone WST 8 0
network-clock-participate wic 1
network-clock-select 1 BRI0/1/0
network-clock-select 2 BRI0/1/1
dot11 syslog
ip source-route
ip cef
ip dhcp relay information trust-all
ip dhcp excluded-address 172.16.100.1 172.16.100.99
ip dhcp excluded-address 172.16.100.200 172.16.100.255
ip dhcp excluded-address 192.168.138.1 192.168.138.99
ip dhcp excluded-address 192.168.138.200 192.168.138.255
ip dhcp pool phone
network 172.16.100.0 255.255.255.0
default-router 172.16.100.1
option 150 ip 172.16.100.1
ip dhcp pool data
import all
network 192.168.138.0 255.255.255.0
default-router 192.168.138.1
dns-server 8.8.8.8 8.8.4.4
ip dhcp pool DoorIntercom
host 192.168.138.5 255.255.255.0
hardware-address 7c1e.b3fe.09a8
ip inspect WAAS flush-timeout 10
ip dhcp-client update dns server both
no ipv6 cef
multilink bundle-name authenticated
stcapp ccm-group 1
stcapp
isdn switch-type basic-net3
trunk group ALL_BRI
hunt-scheme longest-idle
translation-profile outgoing PROFILE_ALL_BRI
trunk group ALL_FXO
max-retry 5
voice-class cause-code 1
hunt-scheme longest-idle
voice call send-alert
voice rtp send-recv
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
sip
registrar server expires max 600 min 60
no update-callerid
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
codec preference 4 g729br8
voice class cause-code 1
no-circuit
voice register global
mode cme
source-address 172.16.100.1 port 5060
max-dn 120
max-pool 30
load 9971 sip9971.9-2-2
load 9951 sip9951.9-2-2
load 8961 sip8961.9-2-2
authenticate register
authenticate realm uc500.local
timezone 42
date-format D/M/Y
hold-alert
create profile sync 0002461994550035
voice register dn 1
number 199
name Door Intercom
no-reg
label Door Intercom
voice register pool 1
registration-timer max 720 min 660
id mac 7C1E.B3FE.09A8
type CiscoMobile-iOS
number 1 dn 1
cor incoming user-internal default
dtmf-relay rtp-nte
username 199 password
codec g711ulaw
voice hunt-group 1 parallel
final 399
list 122,123
timeout 16
pilot 501
voice translation-rule 4
rule 15 /^...$/ /62223151/
voice translation-rule 1000
rule 1 /.*/ //
voice translation-rule 1112
rule 10 /^90[0123][1-9]$.*$/ /019\1/
rule 15 /^9/ //
voice translation-rule 2002
rule 1 /^6/ //
voice translation-rule 2222
voice translation-rule 3119
rule 1 /^3$...$/ /\1/
voice translation-rule 3121
rule 1 /3121/ /121/
voice translation-profile CALLER_ID_TRANSLATION_PROFILE
translate calling 1111
voice translation-profile CallBlocking
translate called 2222
voice translation-profile IOM
translate called 3119
voice translation-profile OUTGOING_TRANSLATION_PROFILE
translate called 1112
voice translation-profile PROFILE_ALL_BRI
translate calling 4
voice translation-profile XFER_TO_VM_PROFILE
translate redirect-called 2002
voice translation-profile nondialable
translate called 1000
voice-card 0
fax interface-type fax-mail
license udi pid UC560-BRI-K9 sn FGL164912CA
archive
log config
logging enable
logging size 600
hidekeys
process-max-time 150
ip tftp source-interface Vlan90
crypto isakmp policy 10
encr 3des
hash md5
authentication pre-share
group 2
lifetime 85400
crypto isakmp key xxxxxxxxx address IP of Isle of Man no-xauth
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto map IOM-VPN 10 ipsec-isakmp
set peer IP of Isle of Man
set transform-set ESP-3DES-MD5
match address 150
interface Loopback0
ip address xxxxxxxxx 255.255.255.0
ip nat inside
ip virtual-reassembly in
interface GigabitEthernet0/0
ip ddns update hostname xxxxxxxxx
ip ddns update dyndns
ip address dhcp client-id GigabitEthernet0/0
ip nat outside
ip virtual-reassembly in
load-interval 30
duplex auto
speed auto
crypto map IOM-VPN
interface Integrated-Service-Engine0/0
description Interface used to manage integrated application modulecue is initialized with default IMAP group
ip unnumbered Vlan90
ip nat inside
ip virtual-reassembly in
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface GigabitEthernet0/1/0
switchport mode trunk
switchport voice vlan 100
no ip address
macro description cisco-switch
interface GigabitEthernet0/1/1
switchport mode trunk
switchport voice vlan 100
no ip address
macro description cisco-switch
interface GigabitEthernet0/1/2
no ip address
macro description cisco-desktop
spanning-tree portfast
interface GigabitEthernet0/1/3
description Interface used to communicate with integrated service module
switchport access vlan 90
no ip address
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface BRI0/1/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
trunk-group ALL_BRI 64
interface BRI0/1/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
trunk-group ALL_BRI 64
interface Virtual-Template1
ip unnumbered Loopback0
ip nat inside
ip virtual-reassembly in
interface Virtual-Template200 type serial
no ip address
interface Vlan1
ip address 192.168.138.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
interface Vlan90
ip address 10.1.10.2 255.255.255.252
ip nat inside
ip virtual-reassembly in
interface Vlan100
ip address 172.16.100.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
ip local pool SDM_WEBVPN_POOL_1 192.168.138.20 192.168.138.29
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/gui
ip dns server
ip nat inside source route-map SDM_RMAP_1 interface GigabitEthernet0/0 overload
ip route 10.1.10.1 255.255.255.255 Vlan90
access-list 100 deny   ip 192.168.138.0 0.0.0.255 192.168.104.0 0.0.0.255
access-list 100 deny   ip 172.16.100.0 0.0.0.255 172.16.105.0 0.0.0.255
access-list 100 deny   ip 172.16.100.0 0.0.0.255 192.168.104.0 0.0.0.255
access-list 100 deny   ip 192.168.138.0 0.0.0.255 172.16.105.0 0.0.0.255
access-list 100 permit ip 10.1.10.0 0.0.0.3 any
access-list 100 permit ip 192.168.138.0 0.0.0.255 any
access-list 100 permit ip 172.16.100.0 0.0.0.255 any
access-list 150 permit ip 192.168.138.0 0.0.0.255 192.168.104.0 0.0.0.255
access-list 150 permit ip 172.16.100.0 0.0.0.255 172.16.105.0 0.0.0.255
access-list 150 permit ip 172.16.100.0 0.0.0.255 192.168.104.0 0.0.0.255
access-list 150 permit ip 192.168.138.0 0.0.0.255 172.16.105.0 0.0.0.255
route-map SDM_RMAP_1 permit 1
match ip address 100
snmp-server community public RO
tftp-server flash:/phones/6901_6911/SCCP6911.9-1-1-0.loads alias SCCP6911.9-1-1-0.loads
tftp-server flash:/phones/6901_6911/SCCP6901.9-1-1-0.loads alias SCCP6901.9-1-1-0.loads
tftp-server flash:/phones/6901_6911/KNL6911SCCP.9-1-1-0.zz.sgn alias KNL6911SCCP.9-1-1-0.zz.sgn
tftp-server flash:/phones/6901_6911/KNL6901SCCP.9-1-1-0.zz.sgn alias KNL6901SCCP.9-1-1-0.zz.sgn
tftp-server flash:/phones/6901_6911/BFS6911SCCP.9-1-1-0.zz.sgn alias BFS6911SCCP.9-1-1-0.zz.sgn
tftp-server flash:/phones/6901_6911/APP6911SCCP.9-1-1-0.zz.sgn alias APP6911SCCP.9-1-1-0.zz.sgn
tftp-server flash:/phones/6901_6911/APP6901SCCP.9-1-1-0.zz.sgn alias APP6901SCCP.9-1-1-0.zz.sgn
tftp-server flash:/phones/69xx/SCCP69xx.9-1-1-2-sr.loads alias SCCP69xx.9-1-1-2-sr.loads
tftp-server flash:/phones/69xx/BOOT69xx.0-0-0-14.zz.sgn alias BOOT69xx.0-0-0-14.zz.sgn
tftp-server flash:/phones/69xx/DSP69xx.0-0-0-4.zz.sgn alias DSP69xx.0-0-0-4.zz.sgn
tftp-server flash:/phones/69xx/SCCP69xx.9-1-1-2-sr.zz.sgn alias SCCP69xx.9-1-1-2-sr.zz.sgn
tftp-server flash:/phones/521_524/cp524g-8-1-17.bin alias cp524g-8-1-17.bin
tftp-server flash:/phones/525/spa525g-7-4-9c.bin alias spa525g-7-4-9c.bin
tftp-server flash:/phones/50x-30x/spa50x-30x-7-4-9c.bin alias spa50x-30x-7-4-9c.bin
tftp-server flash:/phones/7906_7911/apps11.9-2-1TH1-13.sbn alias apps11.9-2-1TH1-13.sbn
tftp-server flash:/phones/7906_7911/cnu11.9-2-1TH1-13.sbn alias cnu11.9-2-1TH1-13.sbn
tftp-server flash:/phones/7906_7911/cvm11sccp.9-2-1TH1-13.sbn alias cvm11sccp.9-2-1TH1-13.sbn
tftp-server flash:/phones/7906_7911/dsp11.9-2-1TH1-13.sbn alias dsp11.9-2-1TH1-13.sbn
tftp-server flash:/phones/7906_7911/jar11sccp.9-2-1TH1-13.sbn alias jar11sccp.9-2-1TH1-13.sbn
tftp-server flash:/phones/7906_7911/SCCP11.9-2-1S.loads alias SCCP11.9-2-1S.loads
tftp-server flash:/phones/7906_7911/term06.default.loads alias term06.default.loads
tftp-server flash:/phones/7906_7911/term11.default.loads alias term11.default.loads
tftp-server flash:/phones/7914/S00105000400.sbn alias S00105000400.sbn
tftp-server flash:/phones/7915/B015-1-0-4.SBN alias B015-1-0-4.SBN
tftp-server flash:/phones/7916/B016-1-0-4.SBN alias B016-1-0-4.SBN
tftp-server flash:/phones/7921/APPS-1.4.1SR1.SBN alias APPS-1.4.1SR1.SBN
tftp-server flash:/phones/7921/CP7921G-1.4.1SR1.LOADS alias CP7921G-1.4.1SR1.LOADS
tftp-server flash:/phones/7921/GUI-1.4.1SR1.SBN alias GUI-1.4.1SR1.SBN
tftp-server flash:/phones/7921/TNUXR-1.4.1SR1.SBN alias TNUXR-1.4.1SR1.SBN
tftp-server flash:/phones/7921/SYS-1.4.1SR1.SBN alias SYS-1.4.1SR1.SBN
tftp-server flash:/phones/7921/TNUX-1.4.1SR1.SBN alias TNUX-1.4.1SR1.SBN
tftp-server flash:/phones/7921/WLAN-1.4.1SR1.SBN alias WLAN-1.4.1SR1.SBN
tftp-server flash:/phones/7925/APPSH-1.4.1SR1.SBN alias APPSH-1.4.1SR1.SBN
tftp-server flash:/phones/7925/CP7925G-1.4.1SR1.LOADS alias CP7925G-1.4.1SR1.LOADS
tftp-server flash:/phones/7925/GUIH-1.4.1SR1.SBN alias GUIH-1.4.1SR1.SBN
tftp-server flash:/phones/7925/JSYSH-1.4.1SR1.SBN alias JSYSH-1.4.1SR1.SBN
tftp-server flash:/phones/7925/JUIH-1.4.1SR1.SBN alias JUIH-1.4.1SR1.SBN
tftp-server flash:/phones/7925/SYSH-1.4.1SR1.SBN alias SYSH-1.4.1SR1.SBN
tftp-server flash:/phones/7925/TNUXH-1.4.1SR1.SBN alias TNUXH-1.4.1SR1.SBN
tftp-server flash:/phones/7925/TNUXRH-1.4.1SR1.SBN alias TNUXRH-1.4.1SR1.SBN
tftp-server flash:/phones/7925/WLANH-1.4.1SR1.SBN alias WLANH-1.4.1SR1.SBN
tftp-server flash:/phones/7931/apps31.9-1-1TH1-16.sbn alias apps31.9-1-1TH1-16.sbn
tftp-server flash:/phones/7931/cnu31.9-1-1TH1-16.sbn alias cnu31.9-1-1TH1-16.sbn
tftp-server flash:/phones/7931/cvm31sccp.9-1-1TH1-16.sbn alias cvm31sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7931/dsp31.9-1-1TH1-16.sbn alias dsp31.9-1-1TH1-16.sbn
tftp-server flash:/phones/7931/jar31sccp.9-1-1TH1-16.sbn alias jar31sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7931/SCCP31.9-1-1SR1S.loads alias SCCP31.9-1-1SR1S.loads
tftp-server flash:/phones/7931/term31.default.loads alias term31.default.loads
tftp-server flash:/phones/7936/cmterm_7936.3-3-21-0.bin alias cmterm_7936.3-3-21-0.bin
tftp-server flash:/phones/7937/apps37sccp.1-4-4-0.bin alias apps37sccp.1-4-4-0.bin
tftp-server flash:/phones/7940_7960/P00308010200.bin alias P00308010200.bin
tftp-server flash:/phones/7940_7960/P00308010200.loads alias P00308010200.loads
tftp-server flash:/phones/7940_7960/P00308010200.sb2 alias P00308010200.sb2
tftp-server flash:/phones/7940_7960/P00308010200.sbn alias P00308010200.sbn
tftp-server flash:/phones/7941_7961/apps41.9-1-1TH1-16.sbn alias apps41.9-1-1TH1-16.sbn
tftp-server flash:/phones/7941_7961/cnu41.9-1-1TH1-16.sbn alias cnu41.9-1-1TH1-16.sbn
tftp-server flash:/phones/7941_7961/cvm41sccp.9-1-1TH1-16.sbn alias cvm41sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7941_7961/dsp41.9-1-1TH1-16.sbn alias dsp41.9-1-1TH1-16.sbn
tftp-server flash:/phones/7941_7961/jar41sccp.9-1-1TH1-16.sbn alias jar41sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7941_7961/SCCP41.9-1-1SR1S.loads alias SCCP41.9-1-1SR1S.loads
tftp-server flash:/phones/7941_7961/term41.default.loads alias term41.default.loads
tftp-server flash:/phones/7941_7961/term61.default.loads alias term61.default.loads
tftp-server flash:/phones/7942_7962/apps42.9-1-1TH1-16.sbn alias apps42.9-1-1TH1-16.sbn
tftp-server flash:/phones/7942_7962/cnu42.9-1-1TH1-16.sbn alias cnu42.9-1-1TH1-16.sbn
tftp-server flash:/phones/7942_7962/cvm42sccp.9-1-1TH1-16.sbn alias cvm42sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7942_7962/dsp42.9-1-1TH1-16.sbn alias dsp42.9-1-1TH1-16.sbn
tftp-server flash:/phones/7942_7962/jar42sccp.9-1-1TH1-16.sbn alias jar42sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7942_7962/SCCP42.9-1-1SR1S.loads alias SCCP42.9-1-1SR1S.loads
tftp-server flash:/phones/7942_7962/term42.default.loads alias term42.default.loads
tftp-server flash:/phones/7942_7962/term62.default.loads alias term62.default.loads
tftp-server flash:/phones/7945_7965/apps45.9-1-1TH1-16.sbn alias apps45.9-1-1TH1-16.sbn
tftp-server flash:/phones/7945_7965/cnu45.9-1-1TH1-16.sbn alias cnu45.9-1-1TH1-16.sbn
tftp-server flash:/phones/7945_7965/cvm45sccp.9-1-1TH1-16.sbn alias cvm45sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7945_7965/dsp45.9-1-1TH1-16.sbn alias dsp45.9-1-1TH1-16.sbn
tftp-server flash:/phones/7945_7965/jar45sccp.9-1-1TH1-16.sbn alias jar45sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7945_7965/SCCP45.9-1-1SR1S.loads alias SCCP45.9-1-1SR1S.loads
tftp-server flash:/phones/7945_7965/term45.default.loads alias term45.default.loads
tftp-server flash:/phones/7945_7965/term65.default.loads alias term65.default.loads
tftp-server flash:/phones/7970_7971/apps70.9-1-1TH1-16.sbn alias apps70.9-1-1TH1-16.sbn
tftp-server flash:/phones/7970_7971/cnu70.9-1-1TH1-16.sbn alias cnu70.9-1-1TH1-16.sbn
tftp-server flash:/phones/7970_7971/cvm70sccp.9-1-1TH1-16.sbn alias cvm70sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7970_7971/dsp70.9-1-1TH1-16.sbn alias dsp70.9-1-1TH1-16.sbn
tftp-server flash:/phones/7970_7971/jar70sccp.9-1-1TH1-16.sbn alias jar70sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7970_7971/SCCP70.9-1-1SR1S.loads alias SCCP70.9-1-1SR1S.loads
tftp-server flash:/phones/7970_7971/term70.default.loads alias term70.default.loads
tftp-server flash:/phones/7970_7971/term71.default.loads alias term71.default.loads
tftp-server flash:/phones/7975/apps75.9-1-1TH1-16.sbn alias apps75.9-1-1TH1-16.sbn
tftp-server flash:/phones/7975/cnu75.9-1-1TH1-16.sbn alias cnu75.9-1-1TH1-16.sbn
tftp-server flash:/phones/7975/cvm75sccp.9-1-1TH1-16.sbn alias cvm75sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7975/dsp75.9-1-1TH1-16.sbn alias dsp75.9-1-1TH1-16.sbn
tftp-server flash:/phones/7975/jar75sccp.9-1-1TH1-16.sbn alias jar75sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7975/SCCP75.9-1-1SR1S.loads alias SCCP75.9-1-1SR1S.loads
tftp-server flash:/phones/7975/term75.default.loads alias term75.default.loads
tftp-server flash:/phones/8961/dkern8961.100609R2-9-2-2.sebn alias dkern8961.100609R2-9-2-2.sebn
tftp-server flash:/phones/8961/kern8961.9-2-2.sebn alias kern8961.9-2-2.sebn
tftp-server flash:/phones/8961/rootfs8961.9-2-2.sebn alias rootfs8961.9-2-2.sebn
tftp-server flash:/phones/8961/sboot8961.031610R1-9-2-2.sebn alias sboot8961.031610R1-9-2-2.sebn
tftp-server flash:/phones/8961/sip8961.9-2-2.loads alias sip8961.9-2-2.loads
tftp-server flash:/phones/8961/skern8961.022809R2-9-2-2.sebn alias skern8961.022809R2-9-2-2.sebn
tftp-server flash:/phones/9951/dkern9951.100609R2-9-2-2.sebn alias dkern9951.100609R2-9-2-2.sebn
tftp-server flash:/phones/9951/kern9951.9-2-2.sebn alias kern9951.9-2-2.sebn
tftp-server flash:/phones/9951/rootfs9951.9-2-2.sebn alias rootfs9951.9-2-2.sebn
tftp-server flash:/phones/9951/sboot9951.031610R1-9-2-2.sebn alias sboot9951.031610R1-9-2-2.sebn
tftp-server flash:/phones/9951/sip9951.9-2-2.loads alias sip9951.9-2-2.loads
tftp-server flash:/phones/9951/skern9951.022809R2-9-2-2.sebn alias skern9951.022809R2-9-2-2.sebn
tftp-server flash:/phones/9971/dkern9971.100609R2-9-2-2.sebn alias dkern9971.100609R2-9-2-2.sebn
tftp-server flash:/phones/9971/kern9971.9-2-2.sebn alias kern9971.9-2-2.sebn
tftp-server flash:/phones/9971/rootfs9971.9-2-2.sebn alias rootfs9971.9-2-2.sebn
tftp-server flash:/phones/9971/sboot9971.031610R1-9-2-2.sebn alias sboot9971.031610R1-9-2-2.sebn
tftp-server flash:/phones/9971/sip9971.9-2-2.loads alias sip9971.9-2-2.loads
tftp-server flash:/phones/9971/skern9971.022809R2-9-2-2.sebn alias skern9971.022809R2-9-2-2.sebn
tftp-server flash:/ringtones/Analog1.raw alias Analog1.raw
tftp-server flash:/ringtones/Analog2.raw alias Analog2.raw
tftp-server flash:/ringtones/AreYouThere.raw alias AreYouThere.raw
tftp-server flash:/ringtones/DistinctiveRingList.xml alias DistinctiveRingList.xml
tftp-server flash:/ringtones/RingList.xml alias RingList.xml
tftp-server flash:/ringtones/AreYouThereF.raw alias AreYouThereF.raw
tftp-server flash:/ringtones/Bass.raw alias Bass.raw
tftp-server flash:/ringtones/CallBack.raw alias CallBack.raw
tftp-server flash:/ringtones/Chime.raw alias Chime.raw
tftp-server flash:/ringtones/Classic1.raw alias Classic1.raw
tftp-server flash:/ringtones/Classic2.raw alias Classic2.raw
tftp-server flash:/ringtones/ClockShop.raw alias ClockShop.raw
tftp-server flash:/ringtones/Drums1.raw alias Drums1.raw
tftp-server flash:/ringtones/Drums2.raw alias Drums2.raw
tftp-server flash:/ringtones/FilmScore.raw alias FilmScore.raw
tftp-server flash:/ringtones/HarpSynth.raw alias HarpSynth.raw
tftp-server flash:/ringtones/Jamaica.raw alias Jamaica.raw
tftp-server flash:/ringtones/KotoEffect.raw alias KotoEffect.raw
tftp-server flash:/ringtones/MusicBox.raw alias MusicBox.raw
tftp-server flash:/ringtones/Piano1.raw alias Piano1.raw
tftp-server flash:/ringtones/Piano2.raw alias Piano2.raw
tftp-server flash:/ringtones/Pop.raw alias Pop.raw
tftp-server flash:/ringtones/Pulse1.raw alias Pulse1.raw
tftp-server flash:/ringtones/Ring1.raw alias Ring1.raw
tftp-server flash:/ringtones/Ring2.raw alias Ring2.raw
tftp-server flash:/ringtones/Ring3.raw alias Ring3.raw
tftp-server flash:/ringtones/Ring4.raw alias Ring4.raw
tftp-server flash:/ringtones/Ring5.raw alias Ring5.raw
tftp-server flash:/ringtones/Ring6.raw alias Ring6.raw
tftp-server flash:/ringtones/Ring7.raw alias Ring7.raw
tftp-server flash:/ringtones/Sax1.raw alias Sax1.raw
tftp-server flash:/ringtones/Sax2.raw alias Sax2.raw
tftp-server flash:/ringtones/Vibe.raw alias Vibe.raw
tftp-server flash:/Desktops/CampusNight.png
tftp-server flash:/Desktops/TN-CampusNight.png
tftp-server flash:/Desktops/CiscoFountain.png
tftp-server flash:/Desktops/TN-CiscoFountain.png
tftp-server flash:/Desktops/CiscoLogo.png
tftp-server flash:/Desktops/TN-CiscoLogo.png
tftp-server flash:/Desktops/Fountain.png
tftp-server flash:/Desktops/TN-Fountain.png
tftp-server flash:/Desktops/MorroRock.png
tftp-server flash:/Desktops/TN-MorroRock.png
tftp-server flash:/Desktops/NantucketFlowers.png
tftp-server flash:/Desktops/TN-NantucketFlowers.png
tftp-server flash:Desktops/320x212x16/List.xml
tftp-server flash:Desktops/320x212x12/List.xml
tftp-server flash:Desktops/320x216x16/List.xml
tftp-server flash:/bacdprompts/en_bacd_allagentsbusy.au alias en_bacd_allagentsbusy.au
tftp-server flash:/bacdprompts/en_bacd_disconnect.au alias en_bacd_disconnect.au
tftp-server flash:/bacdprompts/en_bacd_enter_dest.au alias en_bacd_enter_dest.au
tftp-server flash:/bacdprompts/en_bacd_invalidoption.au alias en_bacd_invalidoption.au
tftp-server flash:/bacdprompts/en_bacd_music_on_hold.au alias en_bacd_music_on_hold.au
tftp-server flash:/bacdprompts/en_bacd_options_menu.au alias en_bacd_options_menu.au
tftp-server flash:/bacdprompts/en_bacd_welcome.au alias en_bacd_welcome.au
tftp-server flash:/bacdprompts/en_bacd_xferto_operator.au alias en_bacd_xferto_operator.au
radius-server attribute 31 send nas-port-detail
control-plane
voice-port 0/0/0
cptone SG
station-id number 401
caller-id enable
voice-port 0/0/1
cptone SG
station-id number 402
caller-id enable
voice-port 0/0/2
cptone SG
station-id number 403
caller-id enable
voice-port 0/0/3
cptone SG
station-id number 404
caller-id enable
voice-port 0/1/0
compand-type a-law
cptone SG
bearer-cap Speech
voice-port 0/1/1
compand-type a-law
cptone SG
bearer-cap Speech
voice-port 0/3/0
trunk-group ALL_FXO 64
cptone SG
connection plar opx 501
description Configured by CCA 4 FXO-0/3/0-BG
caller-id enable
voice-port 0/3/1
trunk-group ALL_FXO 64
cptone SG
connection plar opx 501
description Configured by CCA 4 FXO-0/3/1-BG
caller-id enable
voice-port 0/3/2
trunk-group ALL_FXO 64
cptone SG
connection plar opx 501
description Configured by CCA 4 FXO-0/3/2-BG
caller-id enable
voice-port 0/3/3
trunk-group ALL_FXO 64
cptone SG
connection plar opx 501
description Configured by CCA 4 FXO-0/3/3-BG
caller-id enable
voice-port 0/4/0
auto-cut-through
signal immediate
input gain auto-control -15
description Music On Hold Port
sccp local Vlan90
sccp ccm 172.16.100.1 identifier 1 version 3.1
sccp
sccp ccm group 1
associate ccm 1 priority 1
dial-peer cor custom
name internal
name local
name local-plus
name international
name national
name national-plus
name emergency
name toll-free
dial-peer cor list call-internal
member internal
dial-peer cor list call-local
member local
dial-peer cor list call-local-plus
member local-plus
dial-peer cor list call-national
member national
dial-peer cor list call-national-plus
member national-plus
dial-peer cor list call-international
member international
dial-peer cor list call-emergency
member emergency
dial-peer cor list call-toll-free
member toll-free
dial-peer cor list user-internal
member internal
member emergency
dial-peer cor list user-local
member internal
member local
member emergency
member toll-free
dial-peer cor list user-local-plus
member internal
member local
member local-plus
member emergency
member toll-free
dial-peer cor list user-national
member internal
member local
member local-plus
member national
member emergency
member toll-free
dial-peer cor list user-national-plus
member internal
member local
member local-plus
member national
member national-plus
member emergency
member toll-free
dial-peer cor list user-international
member internal
member local
member local-plus
member international
member national
member national-plus
member emergency
member toll-free
dial-peer voice 1 pots
destination-pattern 401
port 0/0/0
no sip-register
dial-peer voice 2 pots
destination-pattern 402
port 0/0/1
no sip-register
dial-peer voice 3 pots
destination-pattern 403
port 0/0/2
no sip-register
dial-peer voice 4 pots
destination-pattern 404
port 0/0/3
no sip-register
dial-peer voice 5 pots
description ** MOH Port **
destination-pattern ABC
port 0/4/0
no sip-register
dial-peer voice 6 pots
description ôcatch all dial peer for BRI/PRIö
translation-profile incoming nondialable
incoming called-number .%
direct-inward-dial
dial-peer voice 50 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
direct-inward-dial
port 0/1/0
dial-peer voice 51 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
direct-inward-dial
port 0/1/1
dial-peer voice 150 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
port 0/3/0
dial-peer voice 151 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
port 0/3/1
dial-peer voice 152 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
port 0/3/2
dial-peer voice 153 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
port 0/3/3
dial-peer voice 154 pots
description ** FXO pots dial-peer **
destination-pattern A0
port 0/3/0
no sip-register
dial-peer voice 155 pots
description ** FXO pots dial-peer **
destination-pattern A1
port 0/3/1
no sip-register
dial-peer voice 156 pots
description ** FXO pots dial-peer **
destination-pattern A2
port 0/3/2
no sip-register
dial-peer voice 157 pots
description ** FXO pots dial-peer **
destination-pattern A3
port 0/3/3
no sip-register
dial-peer voice 2000 voip
description ** cue voicemail pilot number **
translation-profile outgoing XFER_TO_VM_PROFILE
destination-pattern 399
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 52 pots
trunkgroup ALL_BRI
corlist outgoing call-emergency
description **CCA*Singapore*Emergency Services**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 4
destination-pattern 999[59]
forward-digits all
no sip-register
dial-peer voice 53 pots
trunkgroup ALL_FXO
corlist outgoing call-emergency
description **CCA*Singapore*Emergency Services**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 3
destination-pattern 999[59]
forward-digits all
no sip-register
dial-peer voice 54 pots
trunkgroup ALL_BRI
corlist outgoing call-local
description **CCA*Singapore*VoIP Services**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 4
destination-pattern 93.......
forward-digits all
no sip-register
dial-peer voice 55 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Singapore*VoIP Services**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 3
destination-pattern 93.......
forward-digits all
no sip-register
dial-peer voice 56 pots
trunkgroup ALL_BRI
corlist outgoing call-local
description **CCA*Singapore*Fixed Line Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 4
destination-pattern 96.......
forward-digits all
no sip-register
dial-peer voice 57 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Singapore*Fixed Line Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 3
destination-pattern 96.......
forward-digits all
no sip-register
dial-peer voice 58 pots
trunkgroup ALL_BRI
corlist outgoing call-local-plus
description **CCA*Singapore*Mobile Phones**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 4
destination-pattern 9[89].......
forward-digits all
no sip-register
dial-peer voice 59 pots
trunkgroup ALL_FXO
corlist outgoing call-local-plus
description **CCA*Singapore*Mobile Phones**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 3
destination-pattern 9[89].......
forward-digits all
no sip-register
dial-peer voice 60 pots
trunkgroup ALL_BRI
corlist outgoing call-toll-free
description **CCA*Singapore*Freephone Calls**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 4
destination-pattern 91800.......
forward-digits all
no sip-register
dial-peer voice 61 pots
trunkgroup ALL_FXO
corlist outgoing call-toll-free
description **CCA*Singapore*Freephone Calls**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 3
destination-pattern 91800.......
forward-digits all
no sip-register
dial-peer voice 64 pots
trunkgroup ALL_BRI
description **CCA*Singapore*Alternate Carrier Select**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 4
destination-pattern 915T
forward-digits all
no sip-register
dial-peer voice 65 pots
trunkgroup ALL_FXO
description **CCA*Singapore*Alternate Carrier Select**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 3
destination-pattern 915T
forward-digits all
no sip-register
dial-peer voice 66 pots
trunkgroup ALL_BRI
corlist outgoing call-international
description **CCA*Singapore*International Calls**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 4
destination-pattern 90[0123][1-9]T
forward-digits all
no sip-register
dial-peer voice 67 pots
trunkgroup ALL_FXO
corlist outgoing call-international
description **CCA*Singapore*International Calls**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 3
destination-pattern 90[0123][1-9]T
forward-digits all
no sip-register
dial-peer voice 68 pots
trunkgroup ALL_BRI
corlist outgoing call-local
description **CCA*Singapore*Operator**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 4
destination-pattern 91[01].
forward-digits all
no sip-register
dial-peer voice 69 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Singapore*Operator**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 3
destination-pattern 91[01].
forward-digits all
no sip-register
dial-peer voice 70 pots
trunkgroup ALL_BRI
corlist outgoing call-local
description **CCA*Singapore*Service Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 4
destination-pattern 913..
forward-digits all
no sip-register
dial-peer voice 71 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Singapore*Service Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 3
destination-pattern 913..
forward-digits all
no sip-register
dial-peer voice 72 pots
trunkgroup ALL_BRI
corlist outgoing call-local
description **CCA*Singapore*Service Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 4
destination-pattern 916..
forward-digits all
no sip-register
dial-peer voice 73 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Singapore*Service Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 3
destination-pattern 916..
forward-digits all
no sip-register
dial-peer voice 74 pots
trunkgroup ALL_BRI
corlist outgoing call-local
description **CCA*Singapore*Service Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 4
destination-pattern 917..
forward-digits all
no sip-register
dial-peer voice 75 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Singapore*Service Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 3
destination-pattern 917..
forward-digits all
no sip-register
dial-peer voice 76 pots
trunkgroup ALL_BRI
corlist outgoing call-local
description **CCA*Singapore*Service Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 4
destination-pattern 918[0-9][1-9].
forward-digits all
no sip-register
dial-peer voice 77 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Singapore*Service Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 3
destination-pattern 918[0-9][1-9].
forward-digits all
no sip-register
dial-peer voice 78 pots
trunkgroup ALL_BRI
corlist outgoing call-local
description **CCA*Singapore*Service Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 4
destination-pattern 919[1-9][1-9]
forward-digits all
no sip-register
dial-peer voice 79 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Singapore*Service Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 3
destination-pattern 919[1-9][1-9]
forward-digits all
no sip-register
dial-peer voice 80 pots
trunkgroup ALL_BRI
description **CCA*Singapore*Special Service Code/International Prefixes**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 4
destination-pattern 91T
forward-digits all
no sip-register
dial-peer voice 81 pots
trunkgroup ALL_FXO
description **CCA*Singapore*Special Service Code/International Prefixes**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 3
destination-pattern 91T
forward-digits all
no sip-register
dial-peer voice 82 pots
trunkgroup ALL_BRI
corlist outgoing call-toll-free
description **CCA*Singapore*Freephone Calls**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 4
destination-pattern 9800T
forward-digits all
no sip-register
dial-peer voice 83 pots
trunkgroup ALL_FXO
corlist outgoing call-toll-free
description **CCA*Singapore*Freephone Calls**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 3
destination-pattern 9800T
forward-digits all
no sip-register
dial-peer voice 3150 voip
description INTERSITE CALLS TO IOM
translation-profile incoming IOM
destination-pattern 09..
session target ipv4:172.16.105.3
incoming called-number .T
dtmf-relay h245-alphanumeric
codec g729br8
dial-peer voice 3151 voip
destination-pattern 0977
session target ipv4:172.16.105.3
max-redirects 10
dtmf-relay h245-alphanumeric
codec g729br8
no dial-peer outbound status-check pots
sip-ua
telephony-service
video
fxo hook-flash
max-ephones 138
max-dn 600
ip source-address 172.16.100.1 port 2000
auto assign 1 to 1 type bri
calling-number initiator
service phone videoCapability 1
service phone ehookenable 1
service dnis overlay
service dnis dir-lookup
service dss
timeouts interdigit 5
system message Seaboard
url services http://10.1.10.1/voiceview/common/login.do
url authentication http://10.1.10.1/voiceview/authentication/authenticate.do
load 7914 S00105000400
load 7915-12 B015-1-0-4
load 7915-24 B015-1-0-4
load 7916-12 B016-1-0-4
load 7916-24 B016-1-0-4
load 7906 SCCP11.9-2-1S
load 7911 SCCP11.9-2-1S
load 7921 CP7921G-1.4.1SR1
load 7925 CP7925G-1.4.1SR1
load 7931 SCCP31.9-1-1SR1S
load 7936 cmterm_7936.3-3-21-0
load 7937 apps37sccp.1-4-4-0
load 7960-7940 P00308010200
load 7941 SCCP41.9-1-1SR1S
load 7941GE SCCP41.9-1-1SR1S
load 7942 SCCP42.9-1-1SR1S
load 7945 SCCP45.9-1-1SR1S
load 7961 SCCP41.9-1-1SR1S
load 7961GE SCCP41.9-1-1SR1S
load 7962 SCCP42.9-1-1SR1S
load 7965 SCCP45.9-1-1SR1S
load 7970 SCCP70.9-1-1SR1S
load 7971 SCCP70.9-1-1SR1S
load 7975 SCCP75.9-1-1SR1S
load 521G-524G cp524g-8-1-17
load 525G spa525g-7-4-9c
load 501G spa50x-30x-7-4-9c
load 502G spa50x-30x-7-4-9c
load 504G spa50x-30x-7-4-9c
load 508G spa50x-30x-7-4-9c
load 509G spa50x-30x-7-4-9c
load 525G2 spa525g-7-4-9c
load 301 spa50x-30x-7-4-9c
load 303 spa50x-30x-7-4-9c
load 6921 SCCP69xx.9-1-1-2-sr
load 6941 SCCP69xx.9-1-1-2-sr
load 6961 SCCP69xx.9-1-1-2-sr
load 6901 SCCP6901.9-1-1-0
load 6911 SCCP6911.9-1-1-0
time-zone 42
date-format dd-mm-yy
keepalive 30 auxiliary 4
voicemail 399
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
multicast moh 239.10.16.16 port 2000
web admin system name admin secret 5 $1$.BzE$MaR5EV3sF7La6S4Mpk02w1
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern 9.T
transfer-pattern .T
transfer-pattern 6... blind
secondary-dialtone 9
night-service day Sun 17:00 09:00
night-service day Mon 17:00 09:00
night-service day Tue 17:00 09:00
night-service day Wed 17:00 09:00
night-service day Thu 17:00 09:00
night-service day Fri 17:00 09:00
night-service day Sat 17:00 09:00
fac standard
create cnf-files version-stamp 7960 Sep 27 2013 16:58:13
ephone-template 15
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use Newcall
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Trnsfer TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-template 16
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use Newcall
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Trnsfer TrnsfVM Confrn Acct Park
ephone-template 17
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use CBarge Newcall
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Trnsfer TrnsfVM Confrn Acct Park
ephone-template 18
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use CBarge Newcall
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Trnsfer TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-dn 9
number BCD no-reg primary
description MoH
moh out-call ABC
ephone-dn 593 dual-line
ring internal
number 123 no-reg primary
pickup-group 1
label 123
description Sandra Lee
name Sandra Lee
huntstop channel
ephone-dn 594 dual-line
ring internal
number 122 no-reg primary
pickup-group 1
label 122
description JuatFong Kien
name JuatFong Kien
huntstop channel
ephone-dn 595 dual-line
ring internal
number 121 no-reg primary
pickup-group 1
label 121
description Brian Wittenborn
name Brian Wittenborn
huntstop channel
ephone-dn 596 dual-line
ring internal
number 120 no-reg primary
pickup-group 1
label 120
description Spare Phone
name Spare Phone
huntstop channel
ephone-dn 597 dual-line
ring internal
number 119 no-reg primary
pickup-group 1
label 119
description Brian Whilock
name Brian Whilock
huntstop channel
ephone-dn 598
number 6... no-reg primary
description ***CCA XFER TO VM EXTENSION***
call-forward all 399
ephone-dn 599
number A801... no-reg primary
mwi off
ephone-dn 600
number A800... no-reg primary
mwi on
ephone 1
device-security-mode none
mac-address 20BB.C092.04C1
ephone-template 16
username "119" password 123456
type 7945
no missed-calls
button 1:597
ephone 2
device-security-mode none
mac-address F029.29E3.1D6E
ephone-template 16
username "120" password 123456
type 7945
no missed-calls
button 1:596
ephone 3
device-security-mode none
mac-address F029.29E3.15E8
ephone-template 16
username "121" password 123456
type 7945
no missed-calls
button 1:595
ephone 4
device-security-mode none
mac-address C8F9.F9D7.1489
ephone-template 16
username "122" password 123456
type 7945
no missed-calls
button 1:594
ephone 5
device-security-mode none
mac-address 20BB.C092.0871
ephone-template 16
username "123" password 123456
type 7945
no missed-calls
button 1:593
alias exec cca_voice_mode PBX
banner login ^Cbanner login ^Cisco Configuration Assistant. Version: 3.2 (2). Thu Jul 25 15:13:05 SGT 2013^^C
line con 0
no modem enable
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
speed 115200
line vty 0 4
transport preferred none
transport input all
line vty 5 100
transport preferred none
transport input all
ntp master
ntp server sg.pool.ntp.org prefer
webvpn gateway SDM_WEBVPN_GATEWAY_1
inservice
webvpn install svc flash:/webvpn/anyconnect-win-3.1.04063-k9.pkg sequence 1
webvpn context SDM_WEBVPN_CONTEXT_1
secondary-color white
title-color #CCCC66
text-color black
ssl authenticate verify all
policy group SDM_WEBVPN_POLICY_1
   functions svc-enabled
   svc address-pool "SDM_WEBVPN_POOL_1" netmask 255.255.255.0
   svc keep-client-installed
   svc split include 172.16.100.0 255.255.255.0
   svc split include 192.168.138.0 255.255.255.0
   svc split include 192.168.104.0 255.255.255.0
   svc split include 172.16.105.0 255.255.255.0
virtual-template 1
default-group-policy SDM_WEBVPN_POLICY_1
aaa authentication list sdm_vpn_xauth_ml_1
gateway SDM_WEBVPN_GATEWAY_1
max-users 20
inservice
end

Most of the time this type of symptom is related to a routing issue or ACL.
I am thinking more codec.
your dial-peer 3150 with incoming called number .T will negotiate the codec betweeen IOM and Singapore (g729br8),
can you paste a show call active voice   so we
this way we can at least ascertain what codec is used from IOM to singapore e2e
and what are the phones in singaport using internally?
=============================
Please remember to rate useful posts, by clicking on the stars below.
=============================

Multiple EasyVPN Remote sites using NEM

Similar Messages

Maybe you are looking for