Multiple EDI Connections from ECC

Hello All,
Could you please let me know is it possible to create 2 ALE connections in 1 system and then choose as per partner profile which connection to be assigned?
Regards,
Anand

I hope i understand your question correct:
I this is outbound:;
you can create 2 rfc destinions, create the port manual for this RFC , in the partner profiles you can specify which message should go where;
in the distribution model ( BD64) you can specify filters what should go where.
If this is inbound
just create the partner profiles
Let me know if this is usefull or ifI misundestood the question.

Similar Messages

Airport Express - need to run multiple internet connections from it.

My systems:
iMac
Airport Extreme
Airport Express
Currently, I use my airport express to wirelessly "feed" an internet connection to my Vudu box (movie download box). Right next to that box I would like to connect my Wii and DirecTV boxes to the internet using the airport express. The problem is that the airport Express has only one LAN line.
How can I share this one port with all three devices? I don't want to keep adding Airport Express boxes nor do I want to add an Airport Extreme at that location as I use airtunes on my stereo and Airport Extreme doesn't offer that. As you can tell I am not very computer literate so go gentle on me
any help is much appreciated.
Guy

Ok I need everyone's help. I just bought the AirPort Express I am running Windows XP Service pack 3 I have the ethernet connected to the airport express from our wireless router at the same time my computer is connected to the internet the same way. My computer has Internet just fine. After installing AirPort utility it is saying it is unable to find any Apple wirelss device. I am wanting to use my AirPort express with my IPhone when I travel Internationally. I know it works because fellow employess have done this. I have tried unplugging my Airport Expess and the light keeps blinking amber. How do I get to to flash green and how do I get the Utility to detect the Express so I can set everything up?

Need inputs how to extract data to BI in multiple Data packets from ECC

HI Experts,
would like to know how can i restrict the data to be fetched in multiple data packets as of now all the data is coming in to BI in a single data packet....
I want to get this data in multiple data packets.
I have checked the infopackage settings in BI its as similar to any other Infopackage which is fetching in multiple data packets.
Is there any posibility to restrict data with in ECC

Hussein,
Thank you for the helpfull information.
That document gave me lot of information about ANSI extract for BENIFITS.
Thanks
Kumar.

How to open multiple db connections from one form?

Hello,
We have two different Oracle databases and need to access them (read and write) from the same form. Is there a way to do this, apart from using EXEC_SQL as described in Note 67516.1 ? I could also use db_links and synonyms, but this would add an extra maintenance aspect that I'd like to avoid.
Thanks,
:-Phil

Sorry Phil,
but that's all you got.
Frank

Error Connecting Gateway from ECC

Hi All,
We are trying to configure connection from ECC to Gateway but getting following error. I have having SAP ALL access:
No authorization to log via a trusted system (L-RC =0 T-RC=2).
Please advice on this..
Regards
Rajesh

Hi Rajesh,
Yes, As suggested Derek in the target system must have Auth S_RFCACL.
Thanks,
Syam

Publish a service from ECC 6.0 to Service Registry on PI 7.1

Hello All,
I've been trying to publish a service from ECC to the SR that has been configured on PI 7.1.
I've followed the below steps to configure the connectivity from ECC to PI.
1. On PI 7.1, created 2 destinations (UDDI_DESTINATION & CLASSIFICATION_DESTINATION) with http authentication (used admin user id with uddi_admin and service_registry_read_write roles assigned)
2. On ECC, created an RFC destination of type G to point to PI 7.1 with path prefix /ESRegistryWS/BasicAuthConfig?wsdl&style=document.
3. On ECC, assigned this RFC destination on LPCONFIG for proxy class CO_ESREGISTRY_WSSI and port LP_WORKPLACE.
4. On ECC, WSPARAM created a new UDDI registry entry with logical port name LP_WORKPLACE.
Next, I tried to publish a Z service from ECC (WSPUBLISH) to this new UDDI registry and I get a prompt to enter a user id and password for the service "/ESRegistryWS/BasicAuthConfig": I inputted the admin id which has uddi_admin and service_registry write access, but I got the below error:
Exception raised during physical system publication. Code : ''
Details:
10150 Invalid Response code (401). Server
<http://myhost.domainxyz.com: 50100/uddi/api/publish/> returned
message <Unauthorized>.
Spent a lot of time debugging and couldn't resolve it..Please help..

Thanks, Raja.
I've already assigned both roles (SERVICE_REGISTRY_READ_WRITE and UDDI_ADMIN) to an admin user ID on UME (PI 7.1). When I try to publish a service (Tx: WSPUBLISH) from ECC, immediately, I get a prompt to enter an id and password for the service "/ESRegistryWS/BasicAuthConfig" like I mentioned in the first post. I'm entering the ID I've configured on UME with those two roles assigned, but I get this error.
10150 Invalid Response code (401). Server
<http://myhost.domainxyz.com: 50100/uddi/api/publish/> returned
message <Unauthorized>.
Seems 100% an authorization error..but don't know what else to look for.
Thanks for looking into this and any other thoughts, you might have.

Error when transfer PR from ECC

Hi,My experts:
     I work in SRM5.0 .PDP
    I want to transfer PR form ECC to SRM .I finished the configurtions .Then execute the program "BBP_EXTREQ_TRANSFER".
   But ,SRM did not receive the PR.In SLG1 (SRM system ),It dispalys "External partner number and partner GUID reference different partners".I want to konw what mean it is? and how to do ?
   PS:The RFC user which is used to connect from ECC to SRM must exist in ECC?
BR
ALEX!

Hi Alex
plz refer the below links
Re: PDP - PR transfer error ANORETRY
Re: External Requirments
seems that logical system entry is correct w.r.t client in scc4 in the tables profile table.
please check itup.
rfcuser must be in both system and must be assigned to entry channel.
br
muthu

Can the GPIB-ENET/100 handle multiple TCP connections?

Can the GPIB-ENET/100 handle multiple TCP connections from multiple computers?
-Daniel

Yes, the GPIB-ENET/100 can handle multiple TCP connections.
To safely access the same GPIB-ENET/100 or GPIB-ENET from multiple applications on one or more computers at the same time, use the iblck function. The iblck function prevents one application from interrupting a call made to the GPIB-ENET/100 or GPIB-ENET from another application. Without it, one application could cause an I/O operation initiated by another application to abort or cause other unexpected behavior.
Check the NI-488.2 User Manual for more details:
http://www.ni.com/pdf/manuals/370428a.pdf
Winston L.
National Instruments

RFC connection from SAP Data services to SAP ECC

We have data services set up in linux machine. I am trying to set up RFC connection between data services and SAP ECC.
From data management console after creating RFC connection i am getting "RFC_bad_connection" error message. Username , password, system number, hostname and client is working from SAP GUI and has all the authorizations. SAP gateway and service is name is correct.
Did anyone had similar issue and what was the solution. Do we have start the RFC connection from linux data services machine, i didn't see any sh executable to do so.
Thanks in advance for helping to solve the RFC connection issue.
Edited by: gupta sasha az on Dec 19, 2011 7:24 PM

I am new to SAP and we have just started work on Data Services.
I wanted to know the complete procedure as in how can I establish a connection between Data Services and ECC.
Thanks for your help and time.

Error while connecting to ECC tables from Crystal

Hello,
I am trying to create a crystal report on the SAP ECC tables directly, when I try to create a new connection from u201CSAP Table, Cluster, or Functionu201D option in crystal reports 2008 I get this error" Logon Failed. Details: you don't have necessary rights to design reports against the SAP system. please contact your administrator"
Now my question is where are my rights missing, is it on BO side or SAP side, I see that I have access to SAP tables when I try to logon through the SAP logon pad it works, I could see the tables.
Please let me know your thoughts.
Thanks

Hi,
part of the ABAP Transports from the SAP Integration Kit are also specific authorization objects. Take a look at the Installation guide for the SAP Integration Kit in the appendix.
Ingo

Connecting directly from ECC 6.0 to a 3rd party system with out XI ?

Hi Guys,
we have developed soap-soap scenarios in XI and we are sending the data from ECC 6.0 -> XI ->3rd party webbased system.
Due to some security reasons we are looking for options of doing the same with out XI ie directly from ECC 6.0 to 3rd party system.
can somebody explain or provide the links for doing the direct connection and also suggest the advantages and disadvantages of eliminating XI completly from the design
any hep would be really appreciated
Thanks,
Srini

HI,
Yes, using standard Enterprise services from SAP you can communicate with 3rd party systems also,
Even you can configure the HTTPS communication with R/3 to 3rd Party system. For this you need to install the client Certificates and have to use valid User ID and Passwords.
http://help.sap.com/saphelp_nw04s/helpdata/en/3a/7cddde33ff05cae10000000a128c20/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/e8/1f1041a0f6f16fe10000000a1550b0/frameset.htm
Disadvantage of communication without XI
1. XI provides the re-usability concept. i.e. if you have just R/3 to 3rd party and tomorrow you may need to add another 3rd party or sap system to communicate, then you just re-use the existing scenario.
But in case of direct communication is leads to point-to-point connection.
2. R/3 can't directly support to the open Standards, either you have to use ABAP proxies or RFCs to convert it to XML format. But XI is an Centralized Integration Platform with Open Standard. In current world, Openness is important.
3. XI has the Ability to communicate with other messaging systems/products may be JMS or any other 3rd party systems also which has the limitations with direct communication
4. Complex processes for communication possible instead of only sending and receiving (business process management) (connect e.g. asynchronous and synchronous steps, define complex communication scenarios)
Mapping etc possible to accomplish in Java. Platform independent Java components.
5. XI has Java & .Net support. which is not possible with directly R/3
Thanks
Swarup

Issue while connecting from Biztalk adapter to SAP ECC 6.0

Hi Friends
Issue while connecting from Visulal Studio 2005 to SAP ECC 6.0 throgh Biztalk adapter2.0, even if we pass the correct login details, system is throwing an error like incorrect user/password.
Can you please tell anybody the solution for this.
Regards
Praveen

HI,
is there a special "formation" to put in the user / pass ?
maybe a missing domain ? or missing values like "/" or "\" ?
Do you getting this error in the Biztalk Monitor (Visual 2005) ?

Multiple connections from 6i

IS it possible to connect to oracle and an ODBC connection simultaneously from one data block?
Any suggestions?

I figured that the NAT item did not apply, but with some of the weird things that have gone on with the concentrator I just never know.
The problem is how PPTP works and that it is not smart enough to allow the multiple connections from the same ip. I had to move this client site over to IPSEC using the Cisco VPN client. This works cleanly and actually seems better then the PPTP connection, but that is besides the point. The whole issue was a part of PPTP that I did not know about. I had to open a TAC case for someone at Cisco to tell me this in about 15 seconds.
Hope this makes sense
Dave

How to connect from bw system ecc system.

how to connect from bw system ecc system.

Solution
Maintain the entry using the following path:
Call Administrator workbench (transaction RSA1).
From the 'Settings' menu, select Global Settings'.
If an entry already exists in the field "BW user for ALE", delete this.
Enter the correct names for the BW users in this field.
Save the entry.
You must restart the Administrator Workbench (RSA1) now.
The source system can now be linked without errors.
hope this helps.

Multiple contract creation in ECC from a single GOA

Hi Experts,
I am working on a solution regarding to GOA in SRM - Contract in ECC creation and i am wondering about the following scenario:
Create 1 GOA in SRM 5.0 for a central/global purchasing organization and when the appropriate BADI going to transfer it into ECC, it creates contracts for all company codes.
At my current client they use GOA but until now they created 1 GOA for a specific p.org and the BADI transferred (and created) contract in ECC for the specific company code (they donu2019t have kind of central/global purch organization unit in ppoma). In the future they would like to create GOAs which are usable for all companies, but instead of creating (and changing) them manually (N GOA in SRM for N contract in ECC) they want to have an automatism.
Does any of you have any experience on this? That would be really good if you can share with me some high level overview about concept.
Thanks in advance for your help!
Best Regards,
Attila

Hi,
Let me correct if i am right:
- Central Contract -> new concept of SRM 7.0. 1 contract which is visible and usable from ECC and SRM as well. (not available in SRM 5.0 - agree)
- GOA -> it exist in SRM 5.0 for sure! (we are currenlty using it for ECC procurement).
The solution what you are mentioned is good...but as you said only for SRM 70...we are in SRM 5.0 and we need solution for here. Do you have any idea?
Currently i am thinking about a new solution based on "standard" functionalities: if a GOA need to be created for mulitple company, it has to be populated in Header distribution (all company will have the same contract header). It item detail all the required information need to be poupulate in SRM (i.e.: item 1 for p.org1/comp.cod1; item 2 for p.org2/comp.cod2).
When this is done, the BADI need to check the informatoin in SRM GOA and create contract according to that -> in this case 1GOA is created, but the 2 items for totally different p.org/comp.code, the BADI needs to create 2 different contract in ECC (i would like to avoid using reference purchasing organization in ECC!
Thanks in advance!
Best Regards,
Attila

Multiple EDI Connections from ECC

Similar Messages

Maybe you are looking for