Multiple effects and no bandwidth profiler

Hi
couple of questions please.
If I select view I expected to see the band width profiler as an option but I dont has it been moved in cs5?
Second I've created a tex/symbol effect using the presets with the text coming in from the right.
I now want to duplicate the text/symbol onto another layer and have that as a preset pulse animation.
Is there a way to do this or do I have to start from scratch ie type in the text, convert to a symbol and then add the animation.
I was then going to try to use action scripting to tell the movie to loop starting at the pulse animation.
Is this the correct approach?
thanks
Ian

Still you have the bandwidth profiler in the view.
Copy and paste the frames, select the layer put Ctl+Alt+C and paste the effect Ctl+Alt+V in a layer. then swap the symbol that you want.

Similar Messages

  • Cant open external links and multiple instances of the same profile.

    I have multiple firefox profiles.
    I constantly have two profiles running at the same time.
    I use microsoft outlook and see an external link, I click it wishing firefox to open it in the default or new browser. It does not and says "FIrefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."
    Firefox is running fine.
    How can I open external links with a profile based setup?
    Also, how can I open multiple instances of the same profile? I find that if I click and drag a tab to another monitor, it opens a new "instance" or browser window.

    You say
    ''I have multiple firefox profiles. <br />
    I constantly have two profiles running at the same time. ''
    So you will have discovered ''-no-remote'' Note NOT to use that on the default browser; profile, only on secondary profiles.
    * http://kb.mozillazine.org/Profile_in_use#Common_causes
    You will NOT be able to open multiple instances of the same profile, clone the profile if necessary.
    If you are trying to run multiple Webmail accounts in one profile then you may well find the webmail is identifying and setting the user account that is opened. Use a Private Browsing window to get round that and open a second account.
    * [[Private Browsing - Browse the web without saving information about the sites you visit]]

  • We got a new Apple TV for Christmas and it works wonderful. However, my question is this. We are on a satelitte internet system and our bandwidth is limited. Can anyone tell me what effect it will have on using up my 10 megs of bandwidth?

    We got a new Apple TV for Christmas and it works wonderful. However, my question is this. We are on a satelitte internet system and our bandwidth is limited. Can anyone tell me what effect it will have on using up my 10 megs of bandwidth? If I run over the 10 mgs, the service either slows way down until it is reset on the first of the next month or I have to purchase additional bandwidth and it can get expensive.
    Any information would be greatly appreciated.

    If you only have a 10MB limit on the Internet connection you might as well not have Internet access and certainly should not attempt to stream anything.
    If the limit is 10GB, then you will need to be careful with streaming as most video is 1-3GB for a one hour show.

  • Add multiple effects to a title and to a video

    I have an edited video and inserted a title before the video starts. I would like to have the title zoom and while zooming, fade in. I apply the zoom to the begining of the title on my timeline, edit the duration and the start and end size then try to add a fade but the fade overwrites the zoom. On all the videos I found, they drag and drop the effects onto the clips on the timeline (I have to add them to either the front or back) then it appears on the Effect Controls under Video Effects. When I do it, I do not see the effect under that, I can only see the effect options when I click on the effect on the time line.
    I have tried the same thing to the video itself and can only add one effect to each clip.
    What am I doing wrong? How can I add multiple effects to things on my timeline?

    Here is a +1 for Jim's suggestion to look into Keyframing the Fixed Effect>Motion>Scale, to create your Zoom.
    You could well explore Keyframing another Fixed Effect>Opacity, to have more control over your Fade-In too.
    Good luck,
    Hunt

  • Bandwidth profiler and publish preview to HTML?

    Really? These are no longer present? I see that it shows the swf file size history in the properties palette but its not the same nor nearly as convenient as COMMAND/B. Publish Preview swf embedded in HTML is just gone and any search I do to find out where it is brings up the new Canvas publishing abilities. How can features that have been in for a decade be taken out.

    Yanking tools out that have been in a piece of software for a decade seems like a really bad idea. I still use Flash but only for Display. Everything else is "HTML5". I upgraded to CC to check out the canvas support. The bandwidth profiler and the publish preview taken out has caused my entire workflow to change, not in a good way. Flash is already on its last leg. Adobe should be in touch with its shrunken user base. Its used for Display, Games and some video at this point. It has a much more narrow focus now. I use the bandwidth profiler 30 times a day since Display has strict file size constraints. My banners use dynamic content so I need to see them embedded in HTML so I used the publish preview function just as much.

  • Multiple tracks and effects not bouncing to mp3???

    Hello,
    This might be a tough problem to diagnose due to the many possibilities as to what might be causing this...
    I have multiple tracks and effects missing on a project [32 tracks] after bouncing to mp3. This has never happened to me before and I've been running Logic consistently for about a year now. I've tried bouncing the same project about five times now and there doesn't seem to be any consistency with regards to which tracks and effects go missing.
    I do not have any of the tracks or effects that are missing after bouncing muted and nothing in the project is soloed. No problems with automation prior to bouncing either.
    Please help.
    Thanks.

    cauchy wrote:
    Just tried it and got the infamous "System Overload"!!
    Any suggestions to get around this? I already froze my tracks. Btw, only working with 4 GB's of RAM...could that be the problem?
    Thanks.
    Which is why you're missing tracks... too many plugins, are you using Reverbs and Delays on a bus where possible? RAM could be a problem but the fact is you're over-taxing your system. It could be virtual instruments, it could be not being able to pull data off a drive fast enough... it could be using too many Reverbs as inserts when using one on a bus for several tracks would be more economical.
    Try giving your system more time to work.
    Increase the I/O Buffer to 512 or 1024...... try the Process Buffer at Large

  • How do we split our iCloud accounts but keep one iTunes account so we can share purchased content for our multiple iPhones and iPads?

    How do we split our iCloud accounts but keep one iTunes account so we can share purchased content for our multiple iPhones and iPads?

    You can migrate a copy of the data to a new account, then delete the other person's data from each account.  To do this, on the phone that will be changing accounts, if you have any photos in photo stream that you want to keep on the phone, save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll. If you have any synced notes that you want to keep on the phone, email these to yourself so you can create new notes in the new account.
    Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account.  (This will only delete the account from this phone, not from iCloud.  The phone that will be keeping the account will not be effected by this.)  When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone.  Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom).  Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge.  This will upload the data to the new account.  You will create a new icloud email address with you turn Mail to On.
    Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (such as deleting your wife's data from your account, and vice versa).

  • Multiple Logical Systems in Partner Profile for one instance

    Can we create multiple Logical Systems in Partner Profile (WE20) for one instance or one System?  If it is possible, can we create Logical System with respect to Plant/Country?

    I am not quite sure if I understood your problem completley. But let's see...
    Usually you use on on MSCS Cluster Group per SAP instance. So you have your already existing NW 7.0 ABAP stack in a separated Cluster Group, and you create a new Cluster Group for your new Java system.
    You can find more information about it in this guide here on SDN:
    Link: [High Availability;
    More information about High Availability Setups for SAP System can be found here on SDN:
    Link: [High Availability]
    If you want to use the same database for your clustered ABAP stack and your new Java stack you can do a MCOD installation.
    Please see Link: [SAP Note 388866 - Multiple Components on One Database - Installation|https://service.sap.com/sap/support/notes/388866]
    Hope this helps.
    Best regards,
    Mathias

  • How do you add multiple effects to the same clip

    How do you had multiple effects to the same clip. I have tried for hours
    I would like to add sepia and aged movie to the same clip. I heard it can be done, but have not figured out how to do it.
    anyone please.

    Normally you can apply only one video effect at a time. But for Sepia, black and white, and others that can be done through the video Adjustments tab, you are in luck.
    Aged Movie should already have a bit of a sepia tone.
    If you want more of a sepia tone or you want to fine tune the sepia effect you can do it with the Clip Inspector/Video Adjustments tab.
    Note: Thanks to Jeff Carlson of MacWorld for this tip.
    If you're looking for a washed-out sepia appearance, first open iMovie's preferences and turn on the Show Advanced Tools option, which adds more controls to the Video Adjustments HUD and other areas of the program. Select the clip you want to alter and press the V key. Set Saturation to 0 percent, and then drag the Red Gain slider to 143 percent, the Green Gain slider to 90 percent, and the Blue Gain slider to 53 percent (feel free to tweak these settings to customize the results). Click on Done when you're finished. Note that the clip thumbnail still appears in color, as the video was shot, but the preview reflects your changes.--JC
    If you need to apply the same settings to all clips, first select the clip you have adjusted. Then Edit/Copy. Then Edit/Select All. Then Edit/Paste Adjustments.

  • How to configure multiple buffers and execute them sequentially?

    I would like to build up a path follower using at least two buffers. I wish to write data into the buffers in advance and then execute them sequentially. How can I do?
    I have tried the case for using two buffers, and could only get the two buffers to work "sequentially",
    which means that I could first write data into buffer 1, then execute it, then write data to buffer 2,
    then execute it. Is there any way that I could use multiple buffers and exectue them as the sequence as
    I want?
    The following are the steps that I used for dual buffers:
    buffer 1:
    flex_set_op_mode
    flex_configure_buffer
    flex_write_buffer (check ready)
    flex_start (check complete)
    buffer 2:
    flex_set_op_m
    ode
    flex_configure_buffer
    flex_write_buffer (check ready)
    flex_start (check complete)
    I wish to achieve the following:
    flex_configure_buffer (buffer 1 & 2)
    flex_write_buffer (to buffer 1)
    flex_start (buffer 1)
    while waiting (flex_write_buffer (to buffer 2))
    flex_start (buffer 2)
    The purpose of my using two buffers is to try to prepare data for buffer 2 when we are waiting
    for the execution of buffer 1 and we could execute buffer 2 almost immediately when buffer 1 was
    done. Apparently, I have tried and with no luck to get it to work.

    You can always configure a buffer for indefinite continuous operation by setting the total points value in the configure buffer function to be the maximum value allowed. You can the use the check buffer function inside the while loop to monitor the backlog of your buffer in order for enough positions to be avaliable for the next set of points to be downloaded. As long as your sets of data are of a smaller size than the total buffer size this will have the effect you are desiring. You can always make your precalculations for the next set of points while the previous move is being executed, you just need to allow enough time between the beginning and the end of your first move for the next calculation to be done.

  • DFSR performance question - high latency and high bandwidth - windows 2012r2

    Hello,
       first question here...
    We have a pair of backup servers, connected with a 1G WAN link (290 ms latency).
    I am replicating backup files (mainly SQL files) between them (one-way), for DR/BCP purposes.
    a Get-DfsrState regularly shows hundreds of files in waiting state, and only 16 or so being downloaded at the same time. The system is using very little bandwidth, much less than what I have set in the replication properties (256mbps)
    Is there any parameter I can tweak to increase the number of files being transferred in parallel copies?  
    Before you ask, the WAN circuits are fine and currently ~80% free. I can easily saturate them using other technologies (rsync, gluster, HTTP). The servers are doing very little as well (2x6C, 32G ram, lots of disks, CPU usually under 10%).
    Any idea on how to speed this up? I saw some registry settings in old articles for windows 2008r2, but nothing for 2012r2.
    Thanks

    Hi,
    It seems that the number of downloading files is not related to bandwidth.
    By default, a maximum of 16 (four in Windows Server 2003 R2) concurrent downloads are shared among all connections and replication groups. Because connections and replication group updates are not serialized, there is no specific order in which updates are
    received. If two schedules are opened, updates are generally received and installed from both connections at the same time.
    For more detailed information, please refer to the thread below:
    DFSR to Multiple sites over slow bandwidth links
    http://social.technet.microsoft.com/Forums/en-US/aedfc06d-9ffa-408c-8852-08fb14c115f0/dfsr-to-multiple-sites-over-slow-bandwidth-links
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Having multiple Goods Suppliers in Partner profiles of Vendor - Uses

    Hi All,
    We use multiple goods suppliers in partner profiles of vendor so that if the supplier has manufacturing facilitiy at various places for same material and he supplies us from one of them as lsited in the PO.
    Above is one of th use of having multiple goods suppliers in partner profiles of vendor.
    Other than above are there any specific benefits , can some one help me in listing  out .
    Regards,
    Vengal Rao.

    do you need to follow up an individual order with a GS or many many orders at one time?
    I am not aware of any standard PO report by partner roles.
    In general the GS partner is just for information purposes, except you are doing business in European Union, then the GS partner is taken instead of the vendor to determine the country of dispatch for the Intrastat reporting.

  • 10 Gig distance and Modal Bandwidth on MMF

    I am struggling with a concept and not finding much in the way of answers.  The spec sheets for SFP+ 10 Gigbit Ethernet optics list the maximum cable distance as a funtion of the fiber type (MMF or SMF), Optical Wavelength, Core diameter and Modal Bandwidth.  However, there are several distance entries for similar items that only differ in their modal bandwidth.
    For example a SFP-10G-SR when connected to 62.5 micron MMF lists the maximum cable distance as either 26M or 33M depending on the modal bandwidth (either 160 or 200).  Is there a way to figure out what the modal bandwidth of a given fiber strand is (short of performing a full fiber characterization study)?  It seems that there is no relationship between the grade of MMF (OM1, 2, or 3) since 62.5 micron fiber should all be considered OM1.
    This is becoming an issue since many companies are wanting to run 10Gigabit Ethernet over some incredibly old fiber plants, and I am trying to get an handle on which distance measures listed in the spec sheets are more realistic when they list multiple distances for the same fiber type that only differ in modal bandwidth.

    "unfortunately moving the buildings closer together isn't an option"
    Everything comes down to money.  If they want to use the older fiber, show them a cost comparison between the cost of moving the building versus installing long reach optics (10G LRM or LX4), pulling new fiber or installing a 10GE Free Space Optics link between the buildings. Just wait until the customer wants to move to 100GE links over the fiber....
    For some fiber links, you may have to test by installing some 10G equipment.  I have not found information regarding how long the OM1 (with low modal bandwidth) was manufactured.  Fiber can be highly variable and sometimes the distance specs leave some operating margin and may support the longer link.
    Good luck!
    Tom

  • Can bookmarks be protable for multiple computers? Is it an option to log on and use my bookmarks with multiple computers and locations? Thanks

    Can bookmarks be protable for multiple computers? Is it an option to log on and use my bookmarks with multiple computers and locations? Thanks

    Profile is a folder which store all your personal data in a safe place
    * https://support.mozilla.com/en-US/kb/Profiles
    You can use this button to go to the current Firefox profile folder:
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    here explain how to backup profile
    * https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
    Here explain how to restore it
    *https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile

  • Multiple adjustment layers vs. multiple effects on a single adj. layer

    I posted this earlier on the Creative Cow forums, and came back with inconclusive answers...
    If I have the exact same clip in 2 separate comps...In Comp 1 I have 5 color correction effects on a single adjustment layer, and in Comp 2 I have 5 adjustment layers with the same effects, 1 effect each spread over the 5 adjustment layers (in the same order). Should I theoretically expect to get the exact same image in both comps?
    Here's the reason I'm asking. I'm doing some color correction that occasionally involves a lot of keying, which I'm doing in Colorista II. It's not green/blue screen keying, it's keying the shot footage for adjustment, e.g. skin tones, backgrounds, blown-out highlights, etc. I'm finding that in order for the Colorista II keyer to work based on previous instances of effects calculations (i.e. Levels, Hue/Sat, or other Colorista instances, all of which occur *before* the key) I'm having to put it on another Adjustment Layer for the keyer to take the earlier effects into account. Otherwise, if it's on the same adjustment layer, the Colorista keyer disregards the previous effects & uses the un-effected clip as the source for the key.
    I don't know if this is just the way the Colorista II keyer works, or if this is a global After Effects-wide order-of-operations thing that I don't fully have a handle on. I understand order of operations, and that Adjustment Layers affect all layers below it, and all that stuff. My question is, what (if anything) is the difference in behavior between multiple effects on a single adjustment layer vs the same effects spread out over multiple adjustment layers? Is it predictable & consistent? Or is it just common knowledge (to everyone else but me) that sometimes you have to use multiple adjustment layers based on the specific effect combinations that you're using?

    I don't know if this is just the way the Colorista II keyer works, or if this is a global After Effects-wide order-of-operations thing that I don't fully have a handle on.
    As far as I understand the SDK, it is not considered practical, since it would require a plug-in to establish its own comp buffer outside the main rendering pipeline, which could lead to issues with color consistency and things like premultiplied vs. straight Alpha. I also seem to remember that as of CS5 it is actually no longer technically possible. Hence effects that use specific source footage API calls will bypass any previous effects and directly operate on the source.
    My question is, what (if anything) is the difference in behavior between multiple effects on a single adjustment layer vs the same effects spread out over multiple adjustment layers? Is it predictable & consistent?
    The result should be the same under all circumstances, assuming all adjustment layers have the same opacity and no masks and their stacking order is equal. Only when you apply masks or adjust the opacity to fade specific adjustments you will see differences. It is also to note that having all effects might be a bit faster and more efficient, since less data is passed from buffer to buffer...
    Mylenium

Maybe you are looking for