Multiple email accounts - only one works correctly

Hello,
I've had a problem with using two email accounts simultaneously on my Z10 from the very beginning. I started with OS 10.1 and now on 10.2 the problem still occurs. My problem is that I can set up one account and it just works fine, but if I set up another account (set up works fine) it won't work properly. With the second account, I can send emails without any problems and the device also receives incoming emails, but if I open these, the text is not shown. I can read the adressor and also the subject, only the content of the email isn't shown.
Of course, I've reinstalled those accounts and checked the settings several times. The result has always been the same. It also doesn't matter which provider I use - whether it's Yahoo or anything else. 
Thus far I only experienced two exceptions where the text could be read. Unfortunately, I can't find any system behind that phenomenons.
Can anyone of you help me? I would highly appreciate it! Thanks!
I'm sorry for any mistakes regarding my English. 
Solved!
Go to Solution.

Consider this?
Delete the account of both email accounts.
ONLY add back the "non-working" email account... see if it works?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • I have multiple email accounts.  One is a google email and another aol.  I have the aol going into my google.  I Now Go Lead Generate! Am using outlook on my pc.  How can I get my outlook to share with my ipad?

    I have multiple email accounts.  One is a google email and another aol.  I have the aol going into my google.  I Now Go Lead Generate! Am using outlook on my pc.  How can I get my outlook to share with my ipad?

    In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account.  The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
    Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
    Ernie

  • Multiple email accounts under one master

    I have 2 kids that would like email accounts. I would like the option of reading their email, if I need to. How do I set up multiple email accounts under one master account? Can it be set up so that their email cannot be deleted by them?
    Thank you in advance.
    Andy B
    IMAC   Mac OS X (10.4.8)  

    You'll need a third party solution to monitor your children's email, etc. Anyone that can access an email account can create, read, and delete messages.
    Spector for Mac is one product I found on Google, that appears to do what you need. I'm sure others are available.
    Here's the search I used to find it.
    - Wayne
    PowerMac G5   Mac OS X (10.4.8)  

  • How to setup multiple email accounts on one apple device It syncs to the rest of my apple devices?

    I have a Macbook pro (10.8.2), iPad 4 (6.0.1), and iPhone 5 (6.0.1).
    I have multiple email accounts set up on my iPhone:
    3X Work
    1X personal
    1X School
    They use Gmail and Microsoft exchange.
    Is it possible to have all these accounts automatically created on my ipad and Macbook without typing in all info again?
    Heres a visual:
    I hope this makes it a little more clear.
    I'm sure in the time it took me to type this, I could've manually added all the accounts to the devices lol
    Oh, and iCloud > Mail is enabled on all devices.
    Thanks for any and all help!

    Your post is a bit open ended....
    First thing - You need to decide if you want to use virtual domains or not.
    If
         [email protected]
         [email protected]
         [email protected]
    all should be separate mailboxes, then you need virtual domains.
    If those 3 addresses can all go to the same mailbox, then you don't.
    If you don't need virtual domains, then don't use them... things are simpler without that feature.
    If thats the case, in the domain name field in Mail service, enter your primary domain.
    You'll then need to enter your other domains via command line.
    First, check your mail domain setting with:
    sudo serveradmin settings mail:postfix:mydomain
    Here is how you enter more than one domain:
    - Quit the Server app
    - Issue this with your domains between the quotes
    sudo serveradmin settings mail:postfix:mydomain = "domain1.com, domain2.com"
    - Restart postfix to activate your change
    sudo postfix reload
    If you open the Server app, you will notice both domains are now listed.

  • Multiple email accounts in one inbox on iPhone?

    I have multiple email accounts set up on iPhone 3GS. Is it possible to view messages from all of them in a single inbox rather than having to check each individual inbox?
    Thanks

    You're welcome.
    Sorry, I received a call and must have hit the Post Message button before I intended.
    Here is my full reply.
    +In a word, no - not at the present time anyway.+
    +A blended Inbox mailbox for all accounts is supported with the Mail.app on a Mac. You can open Inbox to reveal the Inbox mailbox for each account. When selecting the Inbox mailbox for a particular account, only the messages received by that account are available in the message list. When selecting Inbox, all messages received by all accounts are available in the message list. The same applies to Drafts, Sent, Trash, and Junk for all accounts.+
    +Hopefully Apple has at least considered or is working on this or something similar with a future firmware update.+

  • Multiple email accounts into one inbox

    Is it possible to have three email accounts feed into one inbox on the iPhone? I'd like to not have to go through to each inbox when I get a new message to see what it is and who it came from.
    In Mail on my Mac, I can just click "Inbox" to view this or I can click one one of the sub-mailboxes to view an account individually. Is there a way to do the same thing on the iPhone?
    Maybe there's an app that I can use to do this?
    Thanks.
    Jeff

    Thanks very much for that, I'll give it a go.
    And another if thats ok?
    Do you know if I can send a hotmail through googlemail as well as recieve? Then, if so, i can send and recieve for both accounts within mail app and leave my hotmail page all together and just use Mail instead. The problems is that only the googlemail will sync to my googlemail on mac, I'm pretty sure my Hotmail wont sync to my hotmail on mac, even if I have it linked to my googlemail as discussed. ie if I send an email through mail on my hotmail address and then go to hotmail on the mac, I'm pretty sure whichever way I do this, it won't show the sent message on the mac, only the phone. I've tried the sync with googlemail and it works instantly but the only way I can do this at the moment with hotmail is by sending my hotmail message from MBox mail app which syncs fine with my mac hotmail.
    Then again, from what you have said, I guess it wouldn't matter at all if hotmail didn't sync with hotmail on mac as I could use the googlemail on mac for everything.
    so, to conclude, it should show me all messages sent from both mac and phone and from both accounts when I look at googlemail on my mac.
    Sorry for the long message!!

  • 3 email account - only 2 working iPad 2

    Hubby has ipad 2.  iCloud email set up and working fine.  Main personal email set up and working fine BuT 3rd email (work address) will not receive constantly (a few slip through??) and sening is not permitted as it keeps saying username of password incorrect or mailhost zen not responding...
    Both account using same mail host = mailhost.zen.co.uk
    I have checked and re checked and re checked.  I have turned it on/off, done a quick reset, removed the email account and set up again - just doesn't want to know.  I have checked on customer portal that passwords are correct - but nothing will help.  The same email will come through to my ipad and my iphone and hubbies iphone - just not the bloomin ipad 2??
    Incidentally, when it was working we always bcc ourselves, but whenever we sent an email from the work account it would not bcc ourselves.
    Getting very frustrated...  I read somewhere on the web that if you have the email open on nother devices then it will not load to more than one - that is very much not true as I have my mac on all the time with emails open and I get my emails to my ipod touch, iphone,ipad and imac...  so what;s this all about?  Any ideas anyone please?
    I hae 5 emails set up on my ipad, mac, ipod, and iphone and not a worry with any of them..  very strange.  Even checked my settings one by one with hubbies and still not working as it should.  Still getting error messages. 
    He does not want to update to ios7 (and I can't blame him) but this was happening before the update too.
    Many thanks

    Yes, they will.
    (68724)

  • I have two email accounts only one is showing contacts calendars and reminders, how can I have both sets of contacts show up

    I have 2 email accounts but only one of them is showing its contacts how can I get both accounts to show contacts?

    Hi Rochdr,
    You can use the following article to help you address this issue with your mail account in OS X:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • How can I set up multiple email accounts in one folder in Thunderbird?

    Hello; first time poster here.
    I own a business that has several email accounts. I am trying to create a folder (titled my business name), then set up all of the email accounts for my business so they all are in that one folder. I have tried for two days to figure this out and can't seem to do it.
    I have been using Outlook, but it has too many whistles and bells and is way to slow, so I thought I'd give TB a try.
    Can anyone explain IF this is possible, and if so, how can I do it?
    Thanks in advance for any and all assistance.
    Andrew

    http://kb.mozillazine.org/Global_Inbox

  • Mac Mail - multiple hotmail accounts, only 1 works

    In my Mac mail I have 2 separate Hotmail addresses identically set-up following the instructions widely available.
    The 1 email works perfectly and the other fails to sync, it just times out. I captured the logs and the failing account does not even get by step 1 in attempting to reach the Hotmail server. Eventually it will just time out.
    Ive tried resetting my Mac Mail, Redoing the accounts from scratch, but this problem persists itself.

    Try deleting the account and adding it back.
    Troubleshooting Apple Mail
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages
    SMTP servers keep going offline

  • Send Multiple notification mails per one work item

    Hi all,
    How to send notification mails to multiple agents when only one work item hits the inbox of one of the agents ?
    The scenario is like this :-
    Say, we have 3 agents : - agent1, agent2, agent3.
    The workitem will hit the inbox of only one agent, say agent1.
    But the notification mails for the workitem will be droped in the external mail IDs of all the 3 agents - agent1, agent2 and agent3.
    How can we achieve this.
    Regards,
    Debi

    Hi Sujith
    My requirement is a bit different.
    Actually I am facing the problem for PO Workflow.
    This is the standard PO wokflow what i have customized.
    Depending on the release code, i am fetching the next level agent (who will release the PO.)
    Once the first user releases the PO, its release code gets automaticaaly changed.
    And we will find the 2nd agent base on release code once again and the process continues till the end.
    In one of the step (say when 1st user released the PO and now the PO is sent to 2nd agent) we want the notification to be sent to multiple agents (not the work item.)
    Regards,
    Debi

  • HT1692 Have recently installed itunes and outlook on a new computer.  Have multiple email accounts set up in Outlook tho only use contacts and calendar in relation to one of these. Cannot sync itunes with the correct contacts and calendars, Help!

    My new computer is 64-bit running Windows 7 pro, SP1 and Microsoft Office 2010 Pro Plus 32-bit
    My phone is a 4S runing iOS 6.1.3
    Very frustrated now that I have recently installed itunes and outlook on this new computer.  Everything worked perfectly ok on my laptop which was also 64-bit Windows 7 and running 32-bit Microsoft Office 2010 Pro.  I have multiple email accounts set up in Outlook tho only use contacts and calendar in relation to one of these. Cannot sync itunes with the correct contacts and calendars, when I sync the calendar and contacts are empty.  Not sure if there is any way to point itunes to particular address books and calendars.
    I have installed and uninstalled itunes 3 times and thank goodness have a backup
    Can anyone help please?
    thanks in anticipation

    I had my home computer set up to sync to work's Exchange server. It worked well, but I didn't like seeing work email messages and other programs trying to sync with my default Outlook folder, which was then the Exchange (& work related) .ost file. I know there are various ways to manage those problems using filters, view, subfolders, etc., but it was a hassle for me. I think it could work well for many other folks.
    For now, I have published my work calendar and subscribed to that calendar on my home computer. So I have view only access to my calendar on my home computer (and I can add/edit calendar items on my iPad (or Outlook Web Access) when away from work). This is not quite what I wanted, but it may work.
    It almost makes me long for the days when I used my Windows Mobile Treo to sync back and forth between exchange at work and outlook at home (but had many sync conflicts as a result).

  • Multiple email address with one server account

    Why can't Mail have multiple email addresses on one email account? Like Thunderbird calls them Identities. As I remember, Outlook also supports this. I like Mail but it seems rather dated and clunky in this respect.
    I am using mainly IMAP so maybe I should switch to Thunderbird but I do still have some old messages in pop accounts in Mail.

    You can have multiple accounts, but only one "identity." Configure new mail accounts for all the different email addresses you may have. They can each have different configurations, different servers, etc. as well as be individually made active or inactive. All incoming mail will funnel into a single Inbox, but you can use rules to transfer incoming mail to separate mailboxes based on the account.
    What you cannot have are distinct "personalities."
    Bear in mind that Mail is intended for a single user and the vast number of single users only have one email account. I actually have four different email addresses but three of them are set to forward mail to the account I use with Mail. Mail works quite well with IMAP, POP, and Outlook mail accounts.

  • Is there a way to change how Thunderbird checks multiple email accounts from several at once to checking them one at a time?

    There is one problem I've had that I've never seen anyone else have! I live in an area of the Philippines with very poor performing Internet service. Things are slow but, it's enough if you have patience. My freelance work requires that I have multiple email accounts. Thunderbird handles this well except when initially checking emails. Because it checks email accounts all at once, I usually get timeouts and then have to resort to checking them manually, one at a time. So, I'm wondering if the way Thunderbird checks accounts can be changed to one at a time, especially at startup? Thanks!

    Don't know any 'automatic' way - but, i have "Fetch Headers only" set on each of my 'secondary accounts'.
    With varying internet service, manual "Get Messages" is probably the "Best Practice" because you will know how good your service is before you even try.
    maybe set "Check for new messages every 'n' minutes" to different times
    (3 minutes, 6 minutes, etc.) on each 'secondary' account.

  • Have an iphone 3GS, 2 email accounts.  My work email account used to work.  Now if I send any emails from this account it only appears in my sent box.  Recipients internal and external do not receive.  IT person cannot figure why occurring.  Any insight?

    Have a iphone 3GS; 2 email accounts.  one is for work.  It used to work fine until about Feb 2011.  Now when i send emails from my work account it only appears in the sent file.  Recipients do not get email.
    IT person looked at it & cannot find why this is happening.
    Any insight why this is occurring??

    This has nothing to do with your iPhone.
    If a message is in the account's Sent mailbox, this means the message was successfully sent. If a message cannot be sent for whatever reason, it will remain in the Outbox.
    What happens to a message after it was successfully sent has nothing to do with the email client or computer/device used to send the message.

Maybe you are looking for

  • Loading to BI

    Hi Experts, I want to load ticket data from ECC to BI. Is there any standard  DATASOURCES available in R3 to load tickets data to BI  or i have to go generic ?

  • Dual monitor problem (without using two monitors)

    Ok the problem is not with a second monitor not working. The problem is I don't have a second monitor hooked up anymore and the computer still thinks there is still one there. I hooked a second monitor up to my work computer to help with some work I

  • Excel conversion, weblogic8.1

    We are developing a web application using Weblogic 8.1 express as the application server. Where in we need to convert the reports data into excel format and show it in the browser. The approach we followed is as follows. We are creating the excel fil

  • Private static SearchTree empty = empty();

    hi i have a problem understanding why modifying a particular line of code from its original form to another form does not compile. Original Statement: private static SearchTree empty = empty(); The way I Modified it to: private static SearchTree empt

  • DATA PUMP - IMPORT FROM A DATABASE

    Can anyboby please help with the following: We have a 10.2R2-schema, that should be imported into an existing schema on another machine. Whether doing dump on a remote machine or importing over the Lan, it gives me ORA-39006,ORA-39065,ORA-02083,ORA-3