Multiple email-receiver ?

hi,
when sending emails from SAP there is ONE Email for every single receiver in SCOT.
i have 2 email-adresses:
mail1(at)sap.com
mail2(at)sap.com
Is it possible to send ONE(!!!!) mail with both receivers. and NO, i want to put the 2 adresses together
and i can't use the shared distribution list from sap-office !!!
when trying to put the addresses togehter like in outlook or so i get an error:
mail1(at)sap.com;mail2(at)sap.com or
mail1(at)sap.com,mail2(at)sap.com
does not work there. the ',' or ';' as split-sign does not work here
any ideas ?
reg, Martin

Is it possible to send ONE(!!!!) mail with both receivers. and NO, i want to put the 2 adresses together and i can't use the shared distribution list from sap-office !!!
Ok, that narrows it down nicely...
i use the function for a 'email-printer-deivice'. i can enter a email-adress there. so the question is, if i can enter more than one adress.
I'd say the answer is clearly no (release 7.0) and I doubt that anybody else has a better answer. However, you hadn't yet ruled out defining distribution groups/email groups on the mail server your company uses...
Cheers, harald

Similar Messages

How do I add multiple email addresses i have received (900) to my address book instead of doing it one by one?

how do I add multiple email addresses i have received (+ -900) to my address book instead of having to do it one by one?

Grab them all and drag them to the Address Book.
Roger

Multiple email address on a receiver Mail Adapter

I would like to send the following data to the mail adapter. It does seem to like the multiple email ids I have separated by comma. Is this allowed?
If I pass one address it seems to work fine.
Thank you for all your suggestions.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
<Subject>System: XI0 Error: SI0103</Subject>
<From>[email protected]</From>
<To>[email protected],[email protected]</To>
<Content>CUSTOM 000 Project acp061015 not created /n CUSTOM 000 Project Definition Insert: SAP Project number not allowed /n</Content>
</ns1:Mail>

Hi Moorthy,
it should work with semicolon as you say
as it works the same with standard mail receiver
from help.sap.com:
<i>Under To, specify the e-mail address that will receive the message. If you enter more than one address, you must separate them with a semicolon.</i>
I only used that with <b>To</b> but it has to work:)
Regards,
michal

I AM RECEIVING MULTIPLE EMAIL NOTIFICATIONS FOR FACEBOOK POSTS. HOW CAN I FIX THIS?

I AM RECEIVING MULTIPLE EMAIL NOTIFICATIONS FOR FACEBOOK POSTS. HOW CAN I FIX THIS? I AM GETTING LIKE 6 DUPLICATE EMAILS FOR FACEBOOK NOTIFICATIONS. HOW CAN STOP THIS??

Perhaps you should contact Facebook?

Trying to set up a group email "RAM" that will contain multiple email addresses. Receive error messages "check SMTP settings" or "Invalid email address" when I try to send a message to the group.

I am trying to set up the group email "RAM" that will contain multiple email addresses. I have inputted the name "RAM" as a corporation. In the section labeled "Email" I have inputed multiple email addreses so that when I want to send an email to the group "RAM" I just have to input the name "RAM" in the section labeled "To" , input the Subject in the Subject box & the email will be sent to the multiple addresses, yet when I do I receive either one of two error messages being "Invalid Email Address" or "Check SMTP settings" each of which allows me the option of with cancelling the email or send it anyway.

Bump. I'd like to know, too. I even have some synched Groups from my Apple Address Book I email to using Apple Mail on the Powerbook, but I can't see how to do a group mailing on the Touch either.
In normal Mail, I just start typing the name of the group, and it autocompletes, I hit return, and it fills in all addresses in the Group.

Multiple email accounts but receiving emails through 1 account all the time

I have a multiple email accounts set up (called email 1,2,3 and 4 for simplicity) through BIS. Every time I receive an email message irrespective of the email address its sent to it is received through just one account all the time (Email 3). For example somebody sends me a message using the email 1 adress. Its received through email 3. If i hit reply to sender the reply is sent through email 3 (i cannot change this). If I forward the response rather than reply to the response I have the option to send it through email 1,2,3 or 4. If i delete the email 3 account I do not receive any emails. Have tried changing phone, sim card, deleting and resending service books, all email settings and defaults set to email account 1 etc. Has anyone seen this before or does anyone have any suggestions..........

Can you tell us which is the mail account ( hotmail, gmail or any personal)
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Why is it that when i send emails duplications were created? the recepient says he receives multiple emails from me...

why is it that when i send emails duplications were created? the recepient says he receives multiple emails from me...

It is a bug. Try quitting Mail and then reopen it.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Mail Feedback

Users sends multiple emails for one email to be received

I have a user who states that she has to send multiple emails to a customer before she one is able to get through. She doesn't receive a bounce back from them. I recently suggested she remove an images from the emails, we have a corporate logo
that can be used in our signatures, as many of her customers are government and I figured they may be blocking the emails for this reason. Nothing seems to have helped and she still seems to be having the issue. This also occurs sometimes for some
of her customers and other times with others, so it doesn't seem specific to the customer. I have repaired Office and run a virus scan, the scan came up with minimal malware and removed it.

Hi,
Please follow these steps to create a test email in Outlook and send out:
1. Open Outlook, click New Email.
2. In the new window, edit To and Subject fields.
3. Click OPTION, check Request a Delivery Receipt.
4. Then click Send to send the test message.
Please check whether the test message is listed in the Sent Items folder or not. Also waiting for the Delivery Report of this message.
Thanks,
Winnie Liang
TechNet Community Support

Is there a way to get multiple email accounts on the front page of my Iphone? Also I would like to have different sounds when I receive mail in the different accounts. Is this possible?

Is there a way to get multiple email accounts on the front page of my iphone instead of just the generic mail icon? Also is there a way to get a different alert sound for each email?

No.
You need to review this (WYSISWG):
http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

Can Multiple email accounts on Galaxy S4 sync with iCloud & non-iCloud email?

Hello… has anyone successfully set up multiple email accounts (iCloud/Yahoo/AT&T/etc.) on their Samsung Galaxy S4 Jelly Bean 4.2? I searched the forums and it has been said that configuration settings depend on the combination of wireless service provider + device model + email providers + Android version.
My S4 is from AT&T and if this scenario can't work, I have to cancel my contract in a few days (although that would be the last resort). From checking the forums, not everyone has been able to get the S4 to work with iCloud. In my case, I hope to sync up with iCloud and non-iCloud email which might be trickier.
Here is one thread that helps with settings, but doesn't seem to address multiple or non-iCloud accounts: https://discussions.apple.com/message/22435596#22435596
Some background info…
Although Gmail just works on Android devices, I plan to primarily use Apple/Yahoo/AT&T email (at least initially).
I don’t yet have Apple mail/iCloud, but plan to. I am partially switched to the Mac (Mtn Lion), but haven’t completed the jump from Windows.
I don’t have an iPhone (so hopefully that makes the setup less complicated.)
I mostly care about email on the S4 (I’m not concerned about syncing up contacts, calendar, music, etc.).
Apologies for the long post, but hopefully I’ve included the necessary background info for the questions below:
Is it possible to setup multiple (iCloud/Yahoo/AT&T) emails on the Samsung Galaxy S4 from AT&T so that they sync nicely?
From the S4, if I reply to an email, will the Sender in the email reply be the same account which received the email? Or, (as I’ve read in the excerpt below) will the Sender for all email replies from the S4 be set from a fixed/primary account?
Although the first two questions above are the most urgent for now, I'd appreciate pointers if you see something that should be changed in the configuration settings below.
Thanks in advance!
--------------------------------- start of excerpt ---------------------------------
A post for setup on a previous model/OS version https://discussions.apple.com/thread/3636567?start=0&tstart=0
After spending quite some time trying to get my T-Mobile Samsung Galaxy S II setup with iCloud mail, this is what finally worked. Thanks to everyone for the various bits that helped lead me in the right direction. For those who need lots of detail, I hope the below helps. Please don't ask me about any other specific Android phones as I'm not expert but thought someone out there could benefit from my experience.
INCOMING SERVER SETTINGS
User Name: username (do not enter @me,com or @mac.com)
Password: (enter your password)
IMAP server: imap.mail.me.com
Security type: SSL
Port: 993
IMAP path prefix: p##- (you can find this by checking your account settings on your Mac. Mine was p03- so that's what I entered here)
Press NEXT
OUTGOING SERVER SETTINGS
SMTP server: smtp.mail.me.com
Security type: TLS
Port: 587
check the box next to "Require sign-in" if it's not already checked
User name: username (do not enter @me.com or @mac.com)
Password (enter your password)
Press NEXT
Your phone will check the server settings and you should be able to see your email now.
And another poster provided these additional tips…
Definitely select SSL/TLS and accept all certificates
Now here's the zinger: Authentication should be LOGIN
After figuring this out, I finally (after many hours of searching and testing) got to my outgoing server settings, which are: smtp.me.com
NONE for security type
Tic "Require Sign-in"
Authentication is PLAIN
And another poster's question about the Sender's email address for multiple accounts…
Managed to get this all set up however, Android only seems to allow you to send from your primary address and only reply from your primary address even if a mail was sent to one of the other addresses.
Any ideas how to get around this as I have three addresses beneath my primary which I need to both send from and reply from.
--------------------------------- end of excerpt ---------------------------------

> has anyone successfully set up multiple email accounts (iCloud/Yahoo/AT&T/etc.) on their Samsung Galaxy S4 Jelly Bean 4.2?
You're unlikely to find many people with experience of configuring multiple email accounts on a specific Samsung device, here on the Apple forum for an Apple service. Try the Samsung forums for help setting up your Samsung phone.
There are a few posts with general info relating to setting up an iCloud email account on Android here if you search though.

Linking multiple emails to a single event in ical and/or to do's

Hi:
Often I receive emails and I want to link them to an event in ical. OS X does this just fine as long as there is date in the email that OS X can recognize. The problem is sometimes I get multiple emails relating to the same event and I would like to be able to link all of those emails to one single event in ical. My same questions applies to 'to do' items.
And a follow up question--say I receive an email that has no date explicit in the text-I've tried to find some function that would allow me to schedule a new event in ical and would link that email to it. (I hope that all makes sense) I'm open to whatever solution I'll even pay money for 3rd party software if anyone knows of a good program. But I"m looking to stick to the basic ical interface. Any suggestions?

Hi rtwigg,
seems this is one of visio graphics limitation regarding the external data.
visio graphics, may only support for one row.
you may consider this idea :
"It is a good idea to separate your rows into visual units so that you have everything you need and nothing else in a single row. To link a shape to a data row, simply drag the row from the external data window and drop it on the shape. A default data
graphic should immediately appear next to the shape displaying some data from the row. From here you are able to customize the graphic to fit your needs"
by means, you may need to use the visio client.
http://blogs.msdn.com/b/visio/archive/2010/02/05/no-code-mashups-with-visio-services-and-web-part-connections.aspx
http://msdn.microsoft.com/en-us/library/ff408345.aspx
http://msdn.microsoft.com/en-us/library/ff394649.aspx
http://blogs.msdn.com/b/visio/archive/2010/02/21/the-visio-services-javascript-mashup-api.aspx
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How can I import multiple email addresses in cc field of MAIL email into Address Book or Contacts?

Hello...Mail and Address Book used to have a great feature where when you received an email (in Mac MAIL program), if there were multiple emails I'm the "to" or "cc" fields, you could select them all as a batch and drag them into Address Book and it would add them all to Address Book. Now it doesn't seem to let you do it as a batch...you have to click each email address and select "add to address book".
Does anyone know of a workaround, or an AppleScript, or third party app that would allow users to add email addresses to AB in a batch from a MAIL email?
Thanks!

Try this.. Click the first in the CC field hold Shift, Click the Second Third, Fouth, Fifth and so on... click right Mouse select add to Contacts.

Multiple email accounts in Thunderbird, but email always sent out from just one no matter which i use - how do I stop that?

I have multiple email accounts on TB. however, whenever I send an email from any of the other accounts, when the email arrives it shows as having been sent from the email account I first set up on TB. even if i am replying to an email received, the reply shows from the original account instead of the one I actually send it from. I REALLY need to fix this fast!!

You have to set the return address to a different one from the first one (since that will usually be the default) if that is what you want. You can set the identity information from Account Settings > [account name] > Manage Identities button.

How do you select multiple emails from the contacts book.

Using 10.8.4. I would like to use mail and select multiple email address' from the contacts book to send the same message to multiple persons. I thought I used to be able to select more than one at a time from my contacts book. Am I crazy or did they change the way it works from the previous version of software.
Or, could you go to the contacts book and email from there. Either way it seems like it was easy to do and now I have to select one at a time and keep going back to the contacts/address book for another name.

Hi shelereric,
Once you open a new message, you should be able to just start typing the first letters of the contact's name, and Mail should give you a dropdown to select from:
So, you should not have to go back and forth between your contacts and mail....anyone in your address book should show up on the dropdown as well as anyone you have received emails from or sent emails to even if they are not in your contacts....
Is that not what is happening for you? Are you using the Mail app on the Mac?
Cheers,
GB

Calendar events created in iCal sending multiple email invites to invitees

Background:
Google Apps domain account
Lion and Snow Leopard iCal users syncing to Google Calendar
Problem:
1.A Lion user creates a new iCal event and invites multiple people to the event. The event is created and then an email invitation is sent to all invitees. Each invitee receives 6 - 10 email notices about the evet.
2. the event organizer changes the event time, multiple email notices go out to all invitees (6-10 emails each).
What is causing this problem and is there a way to fix it?
Thanks

iCal
http://www.apple.com/support/ical

Multiple email-receiver ?

Similar Messages

Maybe you are looking for