Multiple email servers one domain

Probably a silly question.
I'd like to set up two email servers in my domain to receive mail for our company. I want one server to be the main server with all the user accounts and the other to be a back up store and forward server. When mail comes in, and the main server with user accounts is down, then I'd like the store and forward server to collect all email for our users and then forward it on when the main server comes back up.
So, I've set up two servers in my DNS with different preferences in their MX records - server1.mydomain.com with an preference of 10 in it's MX record. server2.mydomain.com with 20 in it's MX record. server1 is where all user accounts are located.
Now presume that server1 is down. Sending servers will query my DNS records, find out server1 is the preferred server discover it's not there and go to server2. If the email received by server2 has a user for this domain that is not located on this server, how does it know where to forward it and how do I set that up so I also don't have an open relay?
Thx.
J.

Bonjour
A iweb site is just a folder (SiteName folder). So you can have several folders in your server.
in iWeb sidebar, you can have several Sites like:
. SiteName1
. SiteName2
. SiteName3
if you publish your iWebsites to the same FTP server
you will have URL like this
SiteName1 ---> http://www.yourdomainname.com/SiteName1/ or http://www.yourdomainname.com/
SiteName2 ---> http://www.yourdomainname.com/SiteName2/
SiteName3 ---> http://www.yourdomainname.com/SiteName3/
You don't need subdomain. but you can use the SiteName folders created by iWeb to make some subdomains
SiteName1 ---> http://www.yourdomainname.com/ (it is not a subdomain)
SiteName2 ---> http://SiteName2.yourdomainname.com/
SiteName3 ---> http://SiteName3.yourdomainname.com/

Similar Messages

How to configure multiple smtp servers per domain

Hi,
how do we configure multiple smtp servers per domain/corporate in iplanet messaging server 5.2. i wanted to do this so that i can configure some domains with virus scanning and some domains without antivirus.

Hi Martin,
Well we are trying to run a report without exactly specifying the name of reports server anywhere, e.g. in database or in form or anywhere else. Now if I do not supply a reports server name using RUN_REPORT_OBJECT, the error it displays is FRM-41211: Integration Error : SSL failure ... However if I specify the reports server name in the form, the reports run perfect. Also the name of reports server is specified in rwservlet.properties.
Now the question goes as follows:
Can I run my report from Form without specifying the name of the Reports server anywhere at all. This is so because either an in-process reports server should be picked or the one which is entered in rwservlet.properties should be pickec up by default. Please correct us if we are wrong. once we are through with it, we have to move to Oracle 10gR2 concept of reports server.
Thanks in anticipation,
Ruchi/Saurabh

How do i delete multiple emails at one time from iphone Mail account with iphone 4s?

how do i delete multiple emails at one time from iphone Mail account with iphone 4s?

Better than that!
http://www.youtube.com/watch?v=fKa-KFjUIGE
Select a message, hold the move button, deselect the message while still holding the move button.
A new window appears allowing you to move all messages to the trash.
Bingo!

Attach multiple emails to one master email using Java mail API

Java version: JDK 1.5.0_15
Hi,
I am using Java API to send email using our corporate microsoft exchange server. Everything is working fine, now I have a requirement to attach multiple emails to one master email and send.
Question:
Using JAVA API is it possible to attach multiple emails to one email?
Regards,
Arup

The beginning of this FAQ entry tells you how to attach one message to another message:
http://www.oracle.com/technetwork/java/javamail/faq/index.html#forward

How do I add multiple emails for one contact to the same group list?

When trying to set up a group email list using address book, is there a way to include multiple emails for the same contact to one group. For example I'm trying to set up a baseball team group email. Some kids want emails sent to both mom and dad which have different emails. I currently have them in my address book as the boy's name with the emails listed as mom and dad. I can add one "mom" to the list but when I compose the email, it will use the most recent email used. I would like the group to contain both addresses for mom and dad without setting up to different contacts for the same player.

var cToAddr = this.getField("saManager").value + ";" + this.getField("ManagerEmail").value;

Is there a way to delete multiple emails at one time?

I did a search but didn't find anything on this.
I just got the new 3G and when I setup one of my email accounts (not .mac) it downloaded 700 emails from that account even though about 600 had been previously deleted.
Is there a way to select multiple emails for deletion? Deleting that many one at a time would be tedious to say the least.

These messages may have been deleted from the email client used on your computer for accessing the account but they weren't deleted at the incoming mail server for the account. If so, the iPhone's Mail client would not have downloaded these messages.
With the mailbox selected, select edit. Each message that you want to delete must be selected which will place a check in the circle to the left of the message.
Select Delete at the bottom.

Not receiving email from one domain

Hi,
I am running Exchange 2003 on Windows Server 2003 SP2 and suddenly starting having the problem of not receiving mail from one domain. All other domains seem to be fine, although seem slower to receive mail than normal. The sender of the domain in question does not receive any NDR or bounce back error messages, so they are none the wiser the mail has come through. I have checked the junk/spam, I don't have any filters which could be blocking the domain.
Any ideas??
Thanks

Hi,
Please enable the protocol log on SMTP virtual server to check whether the remote domain has attempted to connect to your exchange server to send email to you.
If the remote domain has attempted to connect to your exchange server, please check whether the message is received by the SMTP server. If the message has been received, please use the message tracking log or queue viewer to check whether the message stuck on the server.
If the message is rejected, you can use protocol log to gather further information.
If the remote domain does not attempt to connect to your exchange server, I think you need to work with the remote domain admin regarding the issue as other domains are able to send email to you with no problem.
Mike

Users sends multiple emails for one email to be received

I have a user who states that she has to send multiple emails to a customer before she one is able to get through. She doesn't receive a bounce back from them. I recently suggested she remove an images from the emails, we have a corporate logo
that can be used in our signatures, as many of her customers are government and I figured they may be blocking the emails for this reason. Nothing seems to have helped and she still seems to be having the issue. This also occurs sometimes for some
of her customers and other times with others, so it doesn't seem specific to the customer. I have repaired Office and run a virus scan, the scan came up with minimal malware and removed it.

Hi,
Please follow these steps to create a test email in Outlook and send out:
1. Open Outlook, click New Email.
2. In the new window, edit To and Subject fields.
3. Click OPTION, check Request a Delivery Receipt.
4. Then click Send to send the test message.
Please check whether the test message is listed in the Sent Items folder or not. Also waiting for the Delivery Report of this message.
Thanks,
Winnie Liang
TechNet Community Support

Email Activity not sending emails for one domain - 10.1.3.4 MLR#10

I have four domains in my BPELConsole. My evey BPEL process has CatchAll block and I'm sending email notification with fault details.
Somehow, my BPEL processes from three domains are sending emails properly but myDomain4 is not sending emails even after successful execution of Email Activity.
1) I have compared the Email code with processes in other domain and they are similar.
2) orabpel.bpelnotification is not logging any error for this notification.
3) I never received any email from this domain. There was no error in logs during domain creation.
3) I am getting following in logs that sending email was successfully executed. It received Notification ID too
<2010-09-22 07:24:44,530> <DEBUG> <myDomain4.collaxa.cube.services> <oracle.bpel.services.notification.queue.QueueConnectionPool::QueueConnectionPool> Fetched a queue connection from pool java:comp/env/jms/Queue/NotificationSenderQueueConnectionFactory, available connections=4
<2010-09-22 07:24:44,534> <DEBUG> <myDomain4.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Start of send(type,caller,message) type = email caller = BPEL
<2010-09-22 07:24:44,534> <DEBUG> <myDomain4.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Notification ID 12834c63e81c20d0:-71064af1:42b35e5dab4:-7283
Please help/hint for any possible solution/debugging.

sometimes i have seen emails not being sent when the async invokes takes more time than the overall completion.. And yes, we might still see successful log as emails sent. FYI - I am with 10.1.3.3.1 MLR #8.
did you try just creating a email only process? switch off all other processes in that domain and initiate only this email process to see what happens..

How to print multiple emails on one page

How do I print multiple emails on a single page?

Thanks, but fumbling around I think I found a better solution.
All of the incoming e-mails have a see more from...." line in blue type at the bottom. When I click on the"See more from…" line it opens up the entire chain of discussion which can then be printed on a single page. Exactly what I've been searching to do.

Multiple Virtual servers, one listener setup

I am trying SJS 7 as a Proof of Concept project to replace our existing iPlaney 6 and Netscape 2 server instances.
My question is how do I setup SJS to have one http listener on port 80, but be able to handle multiple websites? I want to use a CNAME under our DNS and then have the SJS environment look to see what the domain name is and point it to the correct directory when called upon via web browser.
Under our DNS, each stub file has something like:
mysite IN CNAME devsite.mydomain.com
mysite2 IN CNAME devsite.mydomain.com
Under our Apache's virthost.conf, I just need to do the following:
<VirtualHost mysite.com>
ServerName mysite.com
DocumentRoot /web/mysite.com/htdocs
ErrorLog /var/web/mysite.com/error_log
CustomLog /var/web/mysite.com/access_log common
ScriptAlias /cgi-bin/ "/web/mysite.com/htdocs/"
<Directory /web/mysite.com>
Options Indexes FollowSymLinks Multiviews +Includes
AllowOverride All
</Directory>
</VirtualHost>
<VirtualHost mysite2.com>
ServerName mysite2.com
DocumentRoot /web/mysite2.com/htdocs
ErrorLog /var/web/mysite2.com/error_log
CustomLog /var/web/mysite2.com/access_log common
ScriptAlias /cgi-bin/ "/web/mysite2.com/htdocs/"
<Directory /web/mysite2.com>
Options Indexes FollowSymLinks Multiviews +Includes
AllowOverride All
</Directory>
</VirtualHost>
I setup two virtual servers under one configuration, but the http-listener-1 instance only wants to point to one virtual server instance rather than the pair. I tried to add a 2nd http-listener, but it won't allow me to use the same CNAME address nor port 80 for it as well.
How do I do the same thing that I do with Apache virthosting under SJS 7?
-- Michael

I took a look at the server.xml file, and I currently have this:
<http-listener>
<name>http-listener-1</name>
<ip>sjsdev.mysite.com</ip>
<port>80</port>
<server-name>sjsdev.mysite.com</server-name>
<default-virtual-server-name>screwball</default-virtual-server-name>
</http-listener>
<virtual-server>
<name>screwball</name>
<http-listener-name>http-listener-1</http-listener-name>
<host>sjsdev.mysite.com</host>
<object-file>screwball-obj.conf</object-file>
<document-root>/web/screwball.mysite.com/htdocs</document-root>
<log-file>/web/screwball.mysite.com/logs/server.log</log-file>
</virtual-server>
<virtual-server>
<name>fastball</name>
<http-listener-name>http-listener-1</http-listener-name>
<host>sjsdev.mysite.com</host>
<object-file>fastball-obj.conf</object-file>
<document-root>/web/fastball.mysite.com/htdocs</document-root>
<log-file>/web/fastball.mysite.com/logs/server.log</log-file>
</virtual-server>
I bounced the listener and virtual hosts then tried using a browser for testing.
If I go to http://screwball.mysite.com, it goes to the correct htdocs directory.
If I go to http://fastball.mysite.com, it goes to the screwball htdocs directory instead.
Also, is it possible to make these configuration changes via the Administration web GUI?
Trying to document this as much as possible, mostly via screenshots, for other team members.
-- Michael

Is it possible to have multiple emails on one server?

As the topic says, can i have more then one email service running off of the same server.
example:
[email protected]
and also
[email protected]
I have both domain names and have different websites for the different business. I need to give @something.us to some people and @somethingdifferent.com to others......
Thanks!
Adam

Yes, it's possible to do, but non trivial.
It's easier if every username exists in both domains (e.g. [email protected] is the same person as [email protected]), but it's still possible to do if they're different.
There are two approaches to doing it. Which one you use is up to you.
The first is to use Open Directory and add the email addresses as additional usernames for each account.
For example, you may have a user 'joe' who exists in domain2, so you'd give him the shortnames 'joe' and '[email protected]'. User 'bob' in domain 1 would have the shortnames 'bob' and '[email protected]'.
Note that both users exist in the main directory domain, which could be an entirely different domain.
The second method is the pure Postfix method and involves configuring postfix on the command line to support multiple domains. You'll essentially build a text file list of the names in the secondary domain(s) and will maintain this separately from the main server GUI tools. This optioni s covered in some depth in the Postfix Virtual Domains page.

How to delete multiple emails at one time instead of individually

I want to select random emails (not all in a row sequentially) and delete with single function. I don't want to have to delete each unwanted email individually.How to d this?
Also, There is no delete function at top of email screen-why not?

Have you ever deleted multiple files in Explorer at once? Thunderbird works the same way.
Select the first message you want to delete. Then press and hold Shift and select the last message to be deleted. This selects all messages in between the first and the last one.
By holding down Ctrl and click on an individual messages you can select or de-select it.
Then press Del to delete all selected messages.

Multiple emails under one Apple ID - how to separate iMessages?

We are trying to set up one idevice to use a separate email address under a master Apple ID. It is for a child so they should not have access to all account settings and whatnot. Everything works fine except one element.
On the device that gets all email addresses under the one Apple ID, if someone from a different Apple ID sends an iMessage to any one of the few email addresses under that one Apple ID, all messages show up in one single thread from that person.
So for example, there are the following addresses under the first apple ID:
AppleID1-add1
AppleID1-add2
The main iDevice gets both of these addresses under Apple ID 1. But then there is another iDevice that ONLY sends and receives via AppleID1-add2.
Now, someone under another account, call it AppleID2 has routinely sent iMessages to AppleID1-add1 historically.
The problem is that if AppleID2 sends an iMessage to AppleID1-add2, on the second device it shows just fine. But on the first device under Apple ID 1, ALL iMessages from AppleID2 show up under one thread, regardless of if on AppleID2's device, the message was intended for AppleID1-app1 or AppleID2-app2.
Hope that makes sense. Essentially we want it that if AppleID2 sends an iMessage to AppleID1-add1 it shows up as one thread, and if they send an iMessage to AppleID1-add2, it shows up on a separate thread on the device #1 (which has both -add1 and -add2 enabled).
Make sense? Hope there is a straightforward approach to do this. I was surprised it didn't work this way when we set it up.
Thanks!

You can't separate iMessages to different email addresses on the same Apple ID. However, you can create a separate Apple ID just for iMessages on the device, and leave everything else (Find my iPhone, iTunes & App Stores, etc) on the shared Apple ID.

Multiple emails with one itune account

My husband has an iPhone and I both iPod with one itune account.
How can we keep out personal settings and information seperate on the cloud?

Yes, there is a way to use the new apple id with iMessage. First, go into your settings on your iOS device and click on Messages. Then, click on recieve at in the messages settings. You can then click on your apple id at the top and signout. After, log into your new account. Your other option is to click add another email and enter your new email for iCloud.

Multiple email servers one domain

Similar Messages

Maybe you are looking for