Multiple entries in ARD with same ip, but different ports?

I always learn so much from these forums...thanks to all of you who take the time to answer.
I established 5900/3283 for my primary mac (mac 1) behind my router at home and then configured port forwarding to have a public port of 15900 mapped to the secondary machine (mac 2) at 5900. I have dyndns set up in my router and when connecting from the outside with ARD to the dns name without specifying the port, it connects to mac 1 without problem and reports mac 1 as the name in ARD. Great, no problem.
When I add the 15900 port to the dns name, ARD still shows the mac 1 as the name, but connects to mac 2. Can I fix this to correctly reflect the name of Mac 2? Also, it does not seem possible to have two clients in the ARD list with the same ip address, but different ports. Can this be fixed? Lastly, how do I connect 15900 and 13283 ports in one listing for the port forwarded mac, i.e. how do I enter xxx.xxx.xxx.xxx:15900 and xxx.xxx.xxx.xxx:13283?
Thanks,
ed

And it's still impossible if they all have the same external IP. The whole stroy? See http://discussions.apple.com/thread.jspa?threadID=1321008&tstart=0
On option is to setup a VPN(=Virtual Private Network) as described in the thread I mentioned

Similar Messages

Multiple servers with same IP but different ports - problem listing in ARD

Hi - I have no problem connecting to multiple Macs behind a single IP (router) using different ports, port forwarding, dyndns, etc., etc.
The problem I'm having is that in the list of computers in ARD, it won't let you have more than one with the same IP address. When you create the second with the same IP, it clears the first one, giving it an IP of 0.0.0.0. They are on different ports, but that's not counted as part of the IP, so it still gets cleared. I use different dyndns domain names, but ARD instantly converts them to an IP when creating the entry, so that doesn't help either.
Are there any workarounds?

And it's still impossible if they all have the same external IP. The whole stroy? See http://discussions.apple.com/thread.jspa?threadID=1321008&tstart=0
On option is to setup a VPN(=Virtual Private Network) as described in the thread I mentioned

Manage site with same IP but different port

My computer was updated from Windows XP to Windows 7 and I'm still using CS6. I can not manage two different sites with the same IP address but one has a different port number.
I have it set on Docuemnt Root but apparently it doesn't matter because I'm having the same issue if I change it to site root.
This is what I get to preview:
file:///B:/Admin/facility-management-leasing/facility-management/forms.shtml instead of
http://168.40.15.60:81/Admin/facility-management-leasing/facility-management/forms.shtml
I have the same IP address with out a port to another location
I'm getting file:///W:/news/Announcements.html instead of http://168.40.15.60//news/Announcements.html
Please help this is past frustrating!!!!!
Debby

Make two different site definitions.

Two methods with same name but different return type?

Can I have two methods with same name but different return type in Java? I used to do this in C++ (method overloading or function overloading)
Here is my code:
import java.io.*;
public class Test{
public static void main(String ar[]){
try{
//I give an invalid file name to throw IO error.
File file = new File("c:/invalid file name becasue of spaces");
FileWriter writer = new FileWriter(file ,true);
writer.write("Test");
writer.close();
} catch (IOException IOe){
     System.out.println("Failure");
//call first method - displays stack trace on screen
     showerr(NPe);
//call second method - returns stack trace as string
        String msg = showerr(NPe);
        System.out.println(msg);
} // end of main
public static void showerr(Exception e){
     StringWriter sw = new StringWriter();
     PrintWriter pw = new PrintWriter(sw);
     e.printStackTrace(pw);
     try{
     pw.close();
     sw.close();
     catch (IOException IOe){
     IOe.printStackTrace();
     String stackTrace = sw.toString();
     System.out.println("Null Ptr\n" + stackTrace );
}//end of first showerr
public static String showerr(Exception e){
     StringWriter sw = new StringWriter();
     PrintWriter pw = new PrintWriter(sw);
     e.printStackTrace(pw);
     try{
     pw.close();
     sw.close();
     catch (IOException IOe){
     IOe.printStackTrace();
     return sw.toString();
}//end of second showerr
} // end of class
[\code]

Overloading is when you have multiple methods that have the same name and the same return type but take different parameters. See example
public class Overloader {
     public String buildError(Exception e){
          java.util.Date now = new java.util.Date() ;
          java.text.DateFormat format = java.text.DateFormat.getInstance() ;
          StringBuffer buffer = new StringBuffer() ;
          buffer.append(format.format(now))
               .append( " : " )
               .append( e.getClass().getName() )
               .append( " : " )
               .append( e.getMessage() ) ;
          return buffer.toString() ;
     public String buildError(String msg){
          java.util.Date now = new java.util.Date() ;
          java.text.DateFormat format = java.text.DateFormat.getInstance() ;
          StringBuffer buffer = new StringBuffer() ;
          buffer.append(format.format(now))
               .append( " : " )
               .append( msg ) ;
          return buffer.toString() ;
     public String buildErrors(int errCount){
          java.util.Date now = new java.util.Date() ;
          java.text.DateFormat format = java.text.DateFormat.getInstance() ;
          StringBuffer buffer = new StringBuffer() ;
          buffer.append(format.format(now))
               .append( " : " )
               .append( "There have been " )
               .append( errCount )
               .append( " errors encountered.") ;
          return buffer.toString() ;
}Make sense ???
Regards,

ARD won't save multiple computers with same IP and different port!

I'm trying to access multiple computers over the internet behind a firewall with port forwarding.
I can access each computer, but ARD won't save the IP address and port (in IP Address column of ARD 3.1) of multiple computers with the same IP address. It will only save ONE. I've tried 'add by address', adding a list for each computer or adding a list for all those computers. Nothing has worked. ARD will actually change the first computer's IP address to 0.0.0.0
Example: Static IP address
Computer 1 xx.xxx.xxx.xxx:51 (public port 51 is forwarded to port 5900 on computer 1)
Computer 2 xx.xxx.xxx.xxx:52 (public port 52 is forwarded to port 5900 on computer 2)
Computer 3 xx.xxx.xxx.xxx:53 (public port 53 is forwarded to port 5900 on computer 3)
Has Apple really overlooked this or am I missing something? Isn't this how most people would remotely manage multiple Macs offsite?
Thanks

ARD cannot do this as you're asking. If your
workstations get their addresses from an NAT device
rather than being "real", the ports also need to be
forwarded in the router to the workstation's internal
IP address. ARD uses port 3283 for the reporting and
updating function, so if your Macs are getting their
IP addresses through NAT, since you can only forward
a port to a single workstation, you can only get
reports, push package/files to etc. for a single
workstation.
ARD uses the VNC protocol for observation and
control, though, and there are a range of IP
addresses for that protocol, starting with 5900. ARD
uses 5900 by default, so that port would be forwarded
to the first workstation. You would, I believe, need
to install VNC servers on the systems (since the ARD
client cannot listen on any port other than 5900
while VNC servers can be set for other ports such as
5901, 5902, etc. You would then forward 5901 to the
second workstation (and on to 5902, 5903, etc.). You
can then use the following information:
Remote Desktop 2: How to specify a port number
for a VNC client
to connect.
The only other options are: 1) to run the ARD
administrator on a workstation on the network, and
then take control of that system from outside, either
via VNC or another copy of ARD, or 2) set up a
virtual private network (VPN) so that when you
connect from outside, your admin system is officially
part of the local network.
Hope this helps.
That definitely helps. I have ARD installed on my MBP and on a workstation on the LAN. I have used ARD from the MBP to control ARD on a workstation on the local network, but it can get a little tricky. I already have VNC setup on all the workstations. I used to use COTVNC prior to purchasing ARD 3.1.
I guess what I'm really asking is...
How do I add a list of workstations and save the settings (same IP address for each workstation with different ports?) to control/VNC via ARD?
I simply want a list that shows each workstation, so I can control/VNC them using ARD offsite.
Name: Computer 1 IP Address: 123.123.123.123:5901
Name: Computer 2 IP Address: 123.123.123.123:5902
Name: Computer 3 IP Address: 123.123.123.123:5903
I don't want to have to manually type in the IP address into ARD every time.
Will ARD simply not add another computer to the list if it has the same IP address but different port number as a computer already on the list? I haven't been able to find a way to make ARD do this.

How can I let firefox save usernames/passwords for multiple subdomains that use the same username but different passwords?

on a particular website that has sub domains I have multiple accounts with the same name but different password. Firefox seems only able to save one of them, because they are on the same site.

"Things"? What things? Apps for keeping track of when to change cat litter? 30 different versions of "twinkle, twinkle little star" played by everything from punk rockers to Gregorian chant? Videos on the best way to make Christmas cake?

Importing files with same name but different extensions

Hope I will be clear enough.
Lets say that instead of sending a file from Lightroom to an external editor, I open it directly in Photoshop.
When I'm done, I save the edited photo using the same name but in a different file format : IMG_1333.cr2 > IMG_1333.psd or IMG_1333.tif, and selecting the same folder location.
Then, I come back into Lightroom and synchronise the folder.
Why is the knew version of the picture not showing up beside the original file, despite the different extension ?
I notice that the different extensions ( .psd or .tif ) are recorded in the sidecar files field in the Metadata panel.
Of course, everything works fine if the file name is modified ( or just by selecting the "copy" option in Photoshop's "save as" dialog box ). Lightroom synchronise dialog shows the new photo to import.
So, why is Lightroom not making a difference between files with the same name but different format extensions ?
Thanks for any hint :-)
Gilles.

Gilles-
I think your problem is likely that you have the option to stack the copy with the original turned on. First, right-click on one of these photos and go to the stacking menu. If Unstack is not grayed out then you have a stack -- select Unstack to reveal all copies.
To change the automatic stacking of edited copies from Photoshop, when you next choose to edit a file, in the bottom left corner of the dialog is the check box for unstacking. Clear it, and that choice should "stick" until you change it again.
Hope this helps!
Tony

Three types of restaurant menus with same dishes but different prices.

Hi,
I have to artwork three types of menus for a small restaurant chain. These menus have the same dishes and same background but different prices per restaurant. I will be sending three high res PDFs to print and would like to know if there is a way of doing this without creating three versions of the menues. I know I could create layers and have a layer per restaurant with the text boxes on, turning off and on as I create my PDFs for print but can I have text within the text block that I can turn on and off? Two text blocks, one with prices and one without, is not an option becaues the text all needs to run round together. The reason for this is if a dish needs to be amended it only has to be done once to the master dish. I hope this makes sense.
Many thanks!

Hi Guys,
Thanks very much for your speedy responces!
With regard to the data merge method I am not sure this would work for me because there is a lot of text and I need them to flow from page to page so would need all the text and prices in one text block (I hope I have understood your method correctly MW Design!). I have just had a look at the Conditional Text method and that seems as though it might work for me but one issue I might have is if one dish is removed form a menu all together then the text will run up from another block. I am sure there is a way once I have the master menu done to force the text to the next text block after the last dish I want on that page and then enlarge the text block a little to accommodate any movement of the dishes on that page, I will look into that!
Thanks very much for your help.
PS InDesign never ceases to amaze me!!

Using multiple SSIDs with same name but different PSKs

I have a central WLC 2504 controller that is being used for remote site FlexConnect 1141 APs. They all advertise three different SSIDs. One SSID is a global SSID that is the same at every office. One is a hidden SSID using 802.1x machine auth.
The one I am trying to get working is the local office guest network. These SSIDs are all the same at each office but should have different PSKs. They are local to the office, therefore would only ever be applied to a specific FlexConnect group.
I understand why in theory this is generally not a good idea but given these are for remote sites I'd like it to be possible. I always get this message though:
"WLAN with duplicate SSID and L2 security policy found"
Is there a way around this? New WLC code that allows it maybe?

I was able to configure three (more I think possible) WLANs with same SSID name and all are WPA2-AES-PSK on the same WLC and all are enabled at hte same time.
Note that you can not have any of those broadcasting on same AP group. Each WLAN can be only broadcasted on a separate AP group. For your sites, It will probably need you to define an AP group for each site to broadcast different WLANs on different sites.
You can do that if all your WLANs have an ID of 17 or higher. (the reason is, WLANs of 1-16 are by default broadcasted on the default AP group. and because those can not be on the same AP group - including the default one - then you can't have them with WLAN IDs 1-16. i.e on same - default - AP group)
HTH
Amjad
rating useful replies is more useful than saying "Thank you"

Is it possible to install two SAP system with same SID but different instance numbers on one host?

Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
If yes, then how?
If no, then why?
Thanks in advance.
Regards,
Sarim

Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
Yes, it is possible. If one is CI (PAS) and the second one is an AS (AAS). In this case there will be only one database.
If you are talking about two separate SAP systems with separate databases (Eg: A BI and an ECC) with the same SID then the problem will be with the database (Eg: Oracle)
The database will be installed under /oracle/SID/112_64 (ORACLE_HOME) unless one database is running on 10 G and in that case the ORACLE_HOME will be /oracle/SID/102_64
The next issue will be with the SAP file systems like /sapmnt/SID
The most important problem will be with the switch to the sidadm and orasid users and the conflicts there. If there is a need to stop one of the SAP systems and if you do a switch to sidadm and issue a stopsap command which system will be stopped ?
These are few of the many problems I can think of.
So if we are talking about two separate systems with their own databases I would rule out the possibility of having two systems with the same SID.
Regards
RB

Unable to protect 2 computers with same name, but different Domains

DPM 2012 R2 and UR2
All DC:s and servers are 2012 R2 + Latest patches.
ad.A.com has full 2 Way trust with ad.B.com. (Different forrest)
DPM Server is DPM.ad.A.com
Computer EXCH.ad.A.com is protected without problem
Computer SQL.ad.B.com is protected without problem
When I try to attach agent from EXCH.ad.B.com I'll get problems.
Error 346: DPM is unable to retrieve the configuration information from EXCH.ad.B.com
I'll guess this has to do with same name of computer, although in different domains. Is this as Designed, or is it a defect?
/Peter

please try a different User to attach/install the DPM Agent.
if this is not the solution, you maybe have a Problem with wmi, try and test with wbemtest
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Multiple Devices with Same ID but Different Contacts

My family and I all use one apple id on one computer. I have 5 kids so they all wish to share music and such on their multiple devices.
But, they wish to keep their contacts separate.
Is there an easy way to do this?
I have heard of having several iClouds, but I wish to not do this if possible.
Thanks!

If you are comfortable still using the same AppleID, you can always purchase more storage at a very low cost. Just go to settings>icloud>storage & backup>and change storage plan. You can upgrade for as little as $10. Hope this helps!

How to mass-reindex files with same name but different file extensions

(reposting cos I'm confused about if I posted in the proper place before. Please delete if it is a repost.)
So I'm on a remote workflow. I pick all the raw data and convert it in two quality standards, one on 'high' with full specifications and one on 'low' so I can send 2gb instead of 80gb of files through the internet for me to work remotely on, and to speed up the overall work rhythm because files are lighter. All I need to do is to work at my home with the low quality files, send it back to the client's computer after finished, re-index all files in their high resolution twins and we are good to go to finish the product with highest quality possible. But both high and low quality files need to be the same extension, that I picked .mp4 for it is the standard for pretty much anything.
The point is, if I want to go full mobile, I only have an old HP Pavillion notebook and I really need to work with a video codec that goes very easy on it. I can only think about some 16:9 DV format. But the point is, this format generates a different file extension than my .mp4 standard, and Premiere, to my knowledge, really can't reindex files using only the file name while ignoring the file extension. It really should. And I really need to know how.
We also need to consider Premiere versions that allow themselves to be installed at x32 processors. My desktop is x64 and I really have no problem to work on these standards, the problem is, in my notebook I really can't.
So, halp?

i want to say it was added in cs7, which requires subscription, so in that case might as well be using latest version 8. if you had to use an older version like cs5, you could still use h264 or low bitrate dnxhd/prores codecs inside a quicktime .mov file. that would allow you to have same file ext on both versions of files.

Change selected file to a file with same name but different extension.

So I'm getting better at using Automator to create useful Services but still a bit of a newbie with doing powerful things with AppleScript... and I think this task requires some applescripting. Here's what I want to do:
1. Based on a selected text file I want to run a pre-existing script that converts this file into an HTML file. This new file has the same name as the text file but has the .html extension rather than the .txt extension. (This step is easy enough and it works just fine already.)
2. BUT NOW, I want to take that resulting HTML file and run another pre-existing script that converts the HTML file into an RTF file. The problem is that I basically want to change the selection from selectedfile.TXT to selectedfile.HTML so that I can proceed to this next step...
3. AND THEN, I want to launch an app with this resulting RTF file. Again, I need to change the selection to selectedfile.RTF.
Right now this requires me to run three different services, and changing the selected file between each step... But I'm sure there's an easy applescript way (or other way) to do this using just one service -- probably involves some filename parsing and some magic to change the selection??? -- or something like that...
Could anyone point me in the right direction???
Thank you thank you thank you!
~zyyyy

You can chain your scripts together - depending on the complexity of your pre-existing scripts, you could do this with either AppleScript or Automator. The workflow would just take the selected text file (from step 1), convert to both HTML (2) and RTF (3), then launch your application with the resulting RTF - no need to change any selection.
By the way, this is the Tiger Automator forum - Snow Leopard's Automator is quite a bit different, so you will probably have better luck posting in the Snow Leopard forum.

Grouping albums with same name but different artist?

I have two albums in iTunes 7 which will not group correctly - either they show up as 24 or so separate albums or a single compilation or so on! I've tried marking them as compilations, as not compilations, you name it.
They share the same album name, but have different artists and genres. How can I convince iTunes that they are two distinct albums? (I would have thought this test should be part of the application's logic, to be honest!)
Gavin

Note: I have this album set to be a compilation, I have filled in Queen in all 17 tracks as the album artist and all 17 tracks have the same Album name, it still does not group together properly when sorting by Album Artist (only when sorting by Album Name).
iTunes 7 adds support for the ¨Album Artist¨ tag (as used and required by Windows Media Player). Adding support for this tag was actually a request I made myself a while ago.
Unfortunately iTunes is not using this tag in a useful way (as it was intended). The purpose of this tag (as used by Windows Media Player) is to cope with Albums that contain more than one artist, a good example album is Queen's Greatest Hits III (see http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewAlbum?id=161431875&s=14344 4 ) this album contains tracks by or featuring David Bowie and George Michael (amongst others) as well as Queen themselves, despite this, everyone would consider the Album itself to be by Queen.
The purpose of the Album Artist tag is so that you can browse by the Album Artist and see the entire album listed (and not just those tracks specifically by Queen themselves). Therefore iTunes should if in browse view mode and sorted by Album Artist show the entire album grouped together - IT DOES NOT. Instead it appears to be being sub-sorted by Artist (as well as Album Artist) and this results in it being split in to 3 or more sections. This applies to all three view modes including the Coverflow view.
As things stand the only benefit I get from iTunes now supporting the Album Artist tag is greater compatibility with Windows Media Player, apart from that it appears completely useless in iTunes as currently implemented.

Multiple entries in ARD with same ip, but different ports?

Similar Messages

Maybe you are looking for