Multiple entries in Calendar

Is anyone else having this problem?
My contacts are fine, but I noticed multiple entries in my Calendar on my Touch iPod. In the past, I've seen multiple entries with iCal (I think it came from being synced with my blackberry and/or .mac - but it seems to be working fine for the past month or so), but iCal looks fine.
It's really bizarre, because it almost looks like the further you go back in time, the more duplications for an event (reoccurring) are found. If you try and Delete an occurrence on the iPod, it only allows you to delete from that point forward - but ones from the previous year/month are still there. The starting date for an occurence on the iPod is always on the day you are checking, so it's not like it's set to the first time you entered it or something so you can't go back to the first instance.
ALSO.
I noticed that some all day events span over to the following day on the iPod, but are fine in iCal.

You know - now that you mentioned it - I did see a WHOLE lotta dos - but didn't think anything of it.
I've since restored the thing and elected to not sync the calendar.
One thing that did get fixed - was mix-matched album artwork... podcasts, music, even videos were all getting their album artwork messed up - 1.1.2 seems to have fixed that... mind you... I've had to do a factory restore so many times because of this bloody calendar thing; perhaps I should give it more time before I declare that part is ok.

Similar Messages

Insert multiple entries for calendar

I am inserting CREATEDATE and DUEDATE which could be 9/18/06
& 9/22/06 into a DB as one single entry. I would like a way to
calculate the amount of days between 9/18/06 and 9/22/06 and be
able to insert the same amount of entries as the amount of days
between these dates so that it shows as follows:
Row1: Entry 9/18/06
Row2: Entry 9/19/06
Row2: Entry 9/20/06
Row2: Entry 9/21/06
Row2: Entry 9/22/06
So that I have 5 unique entries into the DB as oppose to just
one.
Thanks
Emmanuel

For anybody interested I ended up setting up the following
which works fine:
<cfset mydate1=DateFormat(arguments.DUEDATE,"yyyy,m,dd
hh:mm:ss")>
<cfset mydate2=DateFormat(arguments.LESSONDATE,"yyyy,m,dd
hh:mm:ss")>
<Cfset intervaldays = "#Int(mydate2-mydate1)#">
<cfset correctamountofdays =
#REreplace(intervaldays,"-","","All")#>
<cfloop index="LoopCount" from="0"
to="#correctamountofdays#">
<Cfset datevar = DateAdd("d", "#LoopCount#",
"#mydate2#")>
<cfquery datasource="#application.dsn#"
name="updateLesson">
insert into
aip.LESSONPLANS
(SUBJECT,LESSONDATE,OBJECTIVE,STANDARD,ASSIGNMENT,STRATEGY,ASSESSMENT,CREATEDATE,DUEDATE, TID,MODIFICATIONS,COLOR)
values
( <cfqueryparam value="#arguments.SUBJECT#"
cfsqltype="CF_SQL_VARCHAR">,
<cfqueryparam value="#datevar#"
cfsqltype="cf_sql_timestamp">,
<cfqueryparam value="#arguments.OBJECTIVE#"
cfsqltype="CF_SQL_VARCHAR">,
<cfqueryparam value="#arguments.STANDARD#"
cfsqltype="CF_SQL_VARCHAR">,
<cfqueryparam value="#arguments.ASSIGNMENT#"
cfsqltype="CF_SQL_VARCHAR">,
<cfqueryparam value="#arguments.STRATEGY#"
cfsqltype="CF_SQL_VARCHAR">,
<cfqueryparam value="#arguments.ASSESSMENT#"
cfsqltype="CF_SQL_VARCHAR">,
SYSDATE,
<cfqueryparam value="#datevar#"
cfsqltype="cf_sql_timestamp">,
<cfqueryparam value="#session.lessonPlanTID#"
cfsqltype="CF_SQL_VARCHAR">,
<cfqueryparam value="#arguments.MODIFICATIONS#"
cfsqltype="CF_SQL_VARCHAR">,
<cfqueryparam value="#arguments.color#"
cfsqltype="CF_SQL_VARCHAR">)
</cfquery>
</cfloop>

HT4528 Calendar under IOS7.0.2 has been changed. does not work the same. what happened to LIST mode (multiple entries being displayed in list format) or am i doing something wrong?

I got use to using Calendar app where multiple entries are stacked under IOS6. Under iOS7.0.2 I enter a new appointment and after the entry I can not find the new appointment after i click on done. Am I doing something incorrect HELP!

The list view does not appear to be among the "standard views" for the Calendar app in iOS 7.0.x. You can still get the list view by going to the day view and hitting the search button (magnifying glass icon).

Multiple entries of the same topic in calendar

Hi, i am having trouble with my calendar, as in it displays multiple entries of 1 entry on the same day! eg. if i have one entry then it displays that same entry about 15-20 times on that same day in a list!!! can anyone help with this fault?

I'm having same problem but where there are duplicate calendar entries, one of the entries cannot be changed (doesn't have edit button)and the other entry can be changed. Needed to reschedule a doctor's appointment and wasn't able to delete b/c there isn't an edit button. So it stays there. Don't know which date is the new rescheduled date. I have iPhone 3g. Since iPhone4 my 3g is extremely slow too.

Contacts producing multiple entries as does calendar . How to stop and fix please.

Contacts producing multiple entries as does Calender. How to stop and fix pls?

ok easiest way it to restore to factory setting and start from there. When you go to do your first sync you don’t “sync contacts or calendar”. When you add mobile me onto your Ipad select all the services that you want to enable and then mobile me will keep everything in sync.
If you need futher steps let me know

Multiple entries in my calendar

Hello:
I have some how gotten multiple entries into my calendar. Thanksgiving day has 6 entries, Mother's day about 5 - that kind of thing. I did NOT import these dates multiple times. Events I have created, either recurring or single, have also some how duplicated themselves.
I do not share a calendar with any one, it's just my stuff. The calendar is so messed up, what I'd like to do is some how select everything going forward and delete it all and start again. Deleting everything one at a time will drive me postal.
Thanks!

Hi,
I wrote an application called iCal Dupe Deleter to fix this sort of problem. See www.nhoj.co.uk/icaldupedeleter
The application is free to use, but I ask for donations if you find it useful.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Multiple entries from iCal calendar being displayed, why?

My Trainingpeaks account is synced with calendar using iCal. Recently multiple entries fro the same vent are being displayed. How do I stop this?

Probably because of iCloud since I assume you started it up on both Macbook and a mobile device.

ESS MSS multiple entry table is not showing up

Hi All,
I have a issue in ESS when user applies leave and cancels the leave. When the user clicks on that day again in the calendar
then unable to see the history of the cancelled leave in ESS Leave application.
multiple entries are there for that day and in the team calender its not showing light blue color.
We are using ESS MSS latest package HR Package and US Payroll.
Swathy

Hello,
Is the posting program being run correctly?
Please check 1104839 - ESS LEA:Wrong Behavior in Change/Delete of Leave
Rgs,
Bentow.

Why do I have multiple entries on my calender

Why is that I have multiple entries on my calender of the same appointment or holiday since I started using I cloud. How do I clean up my calender and not have future duplication on my devices.
I am using the I pad 2 and Iphone 4S
Thanks

Click the calendars button in the top left corner of calendar, look to see if you have groups of calendars other than iCloud. I only have iCloud calendars on my phone so can't show you what I mean, but I have other groups on my iCal application on my mac which is sort of similar.

Why do I have multiple "birthdays" on Calendar only on my Iphone?

Why do I have multiple "birthdays" on Calendar only on my iPhone?

It is probably related to your calendar syncing with certain services and/or apps that end up duplicating the entries. Investigate your sync settings like iCloud, facebook, etc or apps like Cobook which can sync your contacts/to facebook and gmail contacts. The birthdays for all of those would then show up in ical. If there is some kind of redundancy happening it might even resync the same info from the same place multiple times. If you can zero in on a particular service or app that might be the cause, try temporarily unsyncing it to ical/address book and see what happens.

Multiple entries appear on iCal on MBPro

When I open iCal on my Lion MBPro, multiple entries appear each time with an additional entry. How can I prevent this from happening? Can the unwanted entries be removed automatically rather than individually?
Thanks for your help.
Vernon

Hi Vernon,
Do you sync your iPad to your comnputer by iCloud or iTunes (or both)?
Do you have calendars listed under different sections of the calendar list with the same name?
Best wishes
John M

Data in the cube is showing multiple entries when compared with ODS

Hello BW Gurus,
We have a waste report in production planning on Cube and ODS separately. The same info package loads both targets (which means same infosource) but when we run a report on Cube, the records are showing multiple entries (i.e. Key Figures are not matching when compared to ODS) where as the ODS records are showing correctly as it was in R/3. There are totally 6 key figures out of which 4 pulled from R/3 and 2 are populated in BW.
An Example:
Waste report in PP run for plant 1000 for 12/2005 and process order 123456. The operational scrap should be 2.46% and the component scrap should be 3.00% for material 10000000. The report is showing 7.87% for planned operational waste % and 9.6% for planned component waste %. These values are not correct. The ODS values for order 123456 matched the data in R/3 for component and operational scrap.
There is a Start routine to the ODS and also to the cube. I am not good at ABAP so requesting your Help.
Here is the ODS Code:
tables: /BI0/PPRODORDER.
loop at data_package.
select single COORD_TYPE
PRODVERS
into (/BI0/PPRODORDER-COORD_TYPE,
/BI0/PPRODORDER-PRODVERS)
from /BI0/PPRODORDER
where PRODORDER = data_package-PRODORDER
and OBJVERS = 'A'.
if sy-subrc = 0.
if /BI0/PPRODORDER-COORD_TYPE = 'XXXX'
or /BI0/PPRODORDER-COORD_TYPE = 'YYYY'.
data_package-PRODVERS = space.
else.
data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
endif.
endif.
if data_package-calday = space
or data_package-calday = '00000000'.
if data_package-TGTCONSQTY NE 0.
data_package-calday = data_package-ACTRELDATE.
endif.
endif.
modify data_package.
endloop.
Here is Cube Code:
tables: /BI0/PPRODORDER,
/BIC/ODS.
TYPES:
BEGIN OF ys_mat_unit,
material TYPE /bi0/oimaterial,
mat_unit TYPE /bi0/oimat_unit,
numerator TYPE /bi0/oinumerator,
denomintr TYPE /bi0/oidenomintr,
END OF ys_mat_unit.
DATA:
l_s_mat_unit TYPE ys_mat_unit,
e_factor type p decimals 5.
loop at data_package.
select single COORD_TYPE
PRODVERS
into (/BI0/PPRODORDER-COORD_TYPE,
/BI0/PPRODORDER-PRODVERS)
from /BI0/PPRODORDER
where PRODORDER = data_package-PRODORDER
and OBJVERS = 'A'.
if sy-subrc = 0.
if /BI0/PPRODORDER-COORD_TYPE = 'XXX'
or /BI0/PPRODORDER-COORD_TYPE = 'YYY'.
data_package-PRODVERS = space.
else.
data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
endif.
endif.
if data_package-calday = space
or data_package-calday = '00000000'.
if data_package-TGTCONSQTY NE 0.
data_package-calday = data_package-ACTRELDATE.
endif.
endif.
data_package-agsu = 'GSU'.
data_package-agsu_qty = 0.
select single gr_qty
base_uom
into (/BIC/ODS-gr_qty,
/BIC/ODS-base_uom)
from /BIC/ODS
where prodorder = data_package-prodorder
and material = data_package-material.
if sy-subrc = 0.
if /BIC/ODS-base_uom = 'GSU'.
data_package-agsu_qty = /BIC/ODS-gr_qty.
else.
SELECT SINGLE * FROM /bi0/pmat_unit
INTO CORRESPONDING FIELDS OF l_s_mat_unit
WHERE material = data_package-material
AND mat_unit = 'GSU'
AND objvers = 'A'.
IF sy-subrc = 0.
IF l_s_mat_unit-denomintr <> 0.
e_factor = l_s_mat_unit-denomintr /
l_s_mat_unit-numerator.
multiply /BIC/ODS-gr_qty by e_factor.
data_package-agsu_qty = /BIC/ODS-gr_qty.
ENDIF.
else.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = /BIC/ODS-gr_qty
NO_TYPE_CHECK = 'X'
ROUND_SIGN = ' '
UNIT_IN = /BIC/ODS-base_uom
UNIT_OUT = 'GSU'
IMPORTING
OUTPUT = DATA_PACKAGE-gsu_qty
EXCEPTIONS
CONVERSION_NOT_FOUND = 1
DIVISION_BY_ZERO = 2
INPUT_INVALID = 3
OUTPUT_INVALID = 4
OVERFLOW = 5
TYPE_INVALID = 6
UNITS_MISSING = 7
UNIT_IN_NOT_FOUND = 8
UNIT_OUT_NOT_FOUND = 9
OTHERS = 10.
endif.
endif.
endif.
modify data_package.
endloop.
some how the AGSU qyt is not populating in the cube and when I dbug the code, I could see a clean record in the internal table but not in the cube.
your suggestion and solutions would be highly appreciated.
thanks,
Swathi.

Hi Swathi
In ODs we have option of overwriting and addition however in Cube we have only adition.Thats why you are getting multiple enteries.
If you are running daily full load on the cube then please delete the earlier requests.
So at one point of time there should be only one full load request in cube. Hope this will solve your problem.
Regards,
Monika

Can I combine multiple entries into a single statement?

I am relatively new to Live Cycle so forgive my lack of technical wording.
I would like to use multiple entry fields to fill in a statement.
For example:
I'd like the user to see this:
Target Dropdown Endo Dropdown Type Dropdown Version # Entry Date 1 Entry Date 2 Entry
and then have the form merge all that together into a line that looks like this:
RS_(target)_(endo)_(type)\(version)_(date)_(date)
Preferably without repeating information on the page as we'll have multiple of these entries and the page will get hectic quick.
Is this possible?
I first had each dropdown in individual table fields, but due to regulations we follow the entries need to be merged without spaces.
I always have a backup if this can't be done, but any help is appreciated.

Not sure where you're sending it, but if you have a global variable named "bob".
bob.value = "RS_"+target.rawValue+"_"+endo.rawValue+"_"+type.rawValue+"\"+version.rawValue+"_"+date.r awValue+"_"+date2.rawValue;
Something like that should work.

Picking the value of PBEG and PEND incase of multiple entries 2002 on a day

Hi Experts,
Our client's business requirement is to have provision handling multiple entries multiple entries of same subtype of IT 2002 on same day with different Time entries.For example one IT 2002 Styp 1 has entry 10 am to 14 pm & other entry of IT 2002 styp 1 as 14 pm to 16 pm.
In this scenario I want to have TWT with start time of 1st 2002 record i.e 10 & another TWT with end time of last 2002 record i.e. 16.
I have written a PCR as
OUTTPORIGS Origin status
    COLOP*     TIP >TOP curr.TType
P
    HRS=PBEG   Set
    ADDDB90T3 Add to day balance
    HRS=PEND   Set
    ADDDB90T4 Add to day balance
But its giving me value of 2002 start time as (1014=24) & END time (1416=30) respectively.
Since TIP will have entries with origin E & A as well with P and any entry can be 1st or last entry depending on time, I can't use VRSTFIRST & VARSTLAST.
Please suggest me how to handle such scenario through PCR. Is there a way we can make decision on From & To of TIP entries.
You can also suggest me if such need can be handled at masterdata level so that we can have just one entry
Regards
S S
Hi All,
Please also suggest me a better operation to pick the value of PBEG and PEND incase of multiple entries various subtypes of 2002 on same day.I need to compare start- end time of 2002 with 2011 entries and calculate total attendence hrs. Once again, I can't use VRSTFIRST & VRSTLAST as 1st & last TIP entry could be come from any infotype viz 2011,2002, 2001.
Regards
Sunita
Edited by: Sunita on Feb 5, 2011 10:02 AM

If you want to do it the T-SQL way, follow this article I wrote on deleting duplicates..
http://sqlsaga.com/sql-server/how-to-remove-duplicates-from-a-table-in-sql-server/
To read about what ranking functions does and how will they help you use this link..
http://sqlsaga.com/sql-server/what-is-the-difference-between-rank-dense_rank-row_number-and-ntile-in-sql-server/
Please mark as answer, if this has helped you solve the issue.
Good Luck :) .. visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

I use a PC for work and link it to Office 365. I also have an iphone and ipad. How do I synchronise these devices to Outlook without creating multiple copies of calendars?

I use my PC for work (MS Office and Outlook). I also use Office 365. I also have an iPhone and iPad. I'm having difficulty getting Outlook to synchronise with Apple devices. I keep getting multiple copies of calendars and not being able to see contacts. Is there a process anywhere which describes the best way to manage these devices together? Or should I just give up on the PC and buy a MacBook or Air.

Excellent. These guides got me as far as installing my preferred language pack, which gets added to the add-ons automatically (assuming the user says yes to the appearing question when Firefox is started).
However, the GUI does not change unless the user enters "about:config" and changes the locale.
Is there a way to do this from the command line? I mean, changing the locale settings.
And preferrably for all users. So even when new users get added and they start Firefox the first time, they see it appearing with the preferred locale and not in English.

Multiple entries in Calendar

Similar Messages

Maybe you are looking for