Multiple entries in Contacts

I've tried syncing my iPhone with a MacBook several times. At first it worked fine. Then all of a sudden the Phone had FOUR entries for each name in my address book.
I reset the phone, turned on/off iTunes and synched again, to no avail. Nothing on the computer changed and there were still multiple addresses.
I tried checking the box to have the computer overwrite the Phone contacts. Still nothing...
Anyone have a solution or come across this?
Any idea WHY this happened?

Allan,
This link discusses reseting sync history:
http://docs.info.apple.com/article.html?artnum=301217
Hope this helps,
Nathan C.

Similar Messages

Nokia 2323 Contacts: Multiple entries per contact ...

Hello Everyone,
Greetings
I am planning to buy Nokia 2323 Classic phone. gsmarena informs that it can save 1000 contacts. What I need to know is that does this phone accept multiple entries per contact. For example: Work Phone, Home Phone, Fax, Mobile Phone etc. If yes, then how many entries can each contact take? Also, if we add multiple entries then would it reduce the number of contacts we can save?
I have googled but it doesn't help. Also tried looking at the online user guide of Nokia 2323. It talks about going into Details menu and then entering Add detail but doesn't mention what kind of "details" it takes. I would be really glad if some one who has seen/used the phone could help.
Thank you.
Regards
Message Edited by ajobe on 26-Aug-2009 08:25 PM
Solved!
Go to Solution.

Now that I'm not so sure about. The phone will either have a certain amount of memory put aside for contacts and usually you can't tell how much but you can check how much of it you have used as a percentage or it will let the contacts share the same memory as your messages and everything else and when you check your memory it will just tell you how much the contacts are using. I haven't used that phone but I think the 1st case applies to it
Show your appreciation. Hit that kudos button real hard

Multiple entries per contact - What number was used?

I must be missing something... My wife called while I was away from my phone. I look on the "Recent" screen and see her name. But how do I tell where she called me from? I have her office and cell number on the phone. If I hit the arrow which gives me details, it doesn't show me the number that she called from. There are stars next to her office and cell number...
I can certainly touch the name and it'll call the number back that she called from. But I'd like to know the number before I call. What if I want to call her from my office versus returning the call on my iPhone?
Am I missing something?

I've had instances where none of the numbers are highlighted at all. If I go back to the home screen and go back to the recent calls list, then go into an entry, then they are highlighted. Has happened twice now.

Contacts with Multiple Backup Assistant + Contacts Entries

I have read others with these same issues. Unfortunately, the responses they are getting have to do with having multiple contacts and joining those contacts. That is not the issue. The issue is that each contact has MULTIPLE Backup Assistant + Contact entries. Meaning, when you you start typing a name to send a text message to, it shows you multiple phone numbers for that person (only, they are all the same phone number). For example, if I start typing Zoe, it will show you contacts that match, it will have Zoe 555-555-5555 listed 6, 7, 8, or more times. But wait, that is the home number, how you keep scrolling them until you get to the mobile number which is also listed 6, 7, 8 or more times. When you go into you contacts and select Zoe, and then go to Edit, you see why - There are 6, 7, 8 or more Backup Assistant + Contacts entries!!! These duplicates are what we are wanting to know how to remove. My daughter has only one phone number, but when I click on the her picture in the favorite contacts widget, it shows 2 and they are both the same. Even the BAL #225 shows up EIGHT times!!!!! When you go online (to the Backup Assistant), they are all listed there too. HELP!!!!!!!

I have no prblem syncing multiple mobile numbers so I don't think it's a universal issue with iOS. The only difference I see is I am using CardDav instead of using the Exchange option. Have you tried it that way? You can urn off contacts in the Exchange account and add the CardDav account separately.

Contacts producing multiple entries as does calendar . How to stop and fix please.

Contacts producing multiple entries as does Calender. How to stop and fix pls?

ok easiest way it to restore to factory setting and start from there. When you go to do your first sync you don’t “sync contacts or calendar”. When you add mobile me onto your Ipad select all the services that you want to enable and then mobile me will keep everything in sync.
If you need futher steps let me know

How do I remove multiple entries in the "Groups" index of contacts?

How do I remove multiple entries in the "Groups" index of Contacts on the iPad?

The Profile Manager is for all versions of Firefox you have installed - every Profile that is listed in the '''profiles.ini''' file will appear there. The location of the Profile folders has no effect on what the Profile Manager dialog window shows. There is no way to set it up relative to one program installation.
Best thing to do is to have separate desktop shortcuts for each Profile / Firefox-version you want to use.
http://kb.mozillazine.org/Shortcut_to_a_specific_profile

How do I clear out multiple entries for a persons name in the Faces selection?

Can I get some help clearing up multiple entries in the "Click to Name" dialog box in iPhone 9.6?
Here's the behavior I'm seeing:
When I try to assign a name to a Face by clicking the "Click to Name" option, I start typing in my son's name and iPhone is showing me 15 entries for his name.
Of the 15 options, only 1 of them shows a mini-thumbnail photo of him, and a different one suggests that it's from the Contacts app, but the rest of them are blank.
This behavior is not happening for any of the other Faces in the library.
In terms of troubleshooting, I've opened Apple Contacts and ensured there is only 1 contact record for him (there are 2 email address listed). I've selected Library > Faces > And I see one polaroid image in the list for my son. In the past if there were multiple listings here I've seen similar results. I'm not sure what else to try.
What causes these to be duplicated?

I spoke with Apple Support today and they provided a workaround:
I had 7 entries for a person.
Find untagged photo with person in it. Select Entry 1
Find untagged photo with person in it. Select Entry 2
Repeat until you have at least 1 photo tagged with each of the 7 entries
Now go back to Faces and you'll see 7 polaroids listed.
Select each of them and merge them.
Problem solved.

Multiple entries in Calendar

Is anyone else having this problem?
My contacts are fine, but I noticed multiple entries in my Calendar on my Touch iPod. In the past, I've seen multiple entries with iCal (I think it came from being synced with my blackberry and/or .mac - but it seems to be working fine for the past month or so), but iCal looks fine.
It's really bizarre, because it almost looks like the further you go back in time, the more duplications for an event (reoccurring) are found. If you try and Delete an occurrence on the iPod, it only allows you to delete from that point forward - but ones from the previous year/month are still there. The starting date for an occurence on the iPod is always on the day you are checking, so it's not like it's set to the first time you entered it or something so you can't go back to the first instance.
ALSO.
I noticed that some all day events span over to the following day on the iPod, but are fine in iCal.

You know - now that you mentioned it - I did see a WHOLE lotta dos - but didn't think anything of it.
I've since restored the thing and elected to not sync the calendar.
One thing that did get fixed - was mix-matched album artwork... podcasts, music, even videos were all getting their album artwork messed up - 1.1.2 seems to have fixed that... mind you... I've had to do a factory restore so many times because of this bloody calendar thing; perhaps I should give it more time before I declare that part is ok.

Data in the cube is showing multiple entries when compared with ODS

Hello BW Gurus,
We have a waste report in production planning on Cube and ODS separately. The same info package loads both targets (which means same infosource) but when we run a report on Cube, the records are showing multiple entries (i.e. Key Figures are not matching when compared to ODS) where as the ODS records are showing correctly as it was in R/3. There are totally 6 key figures out of which 4 pulled from R/3 and 2 are populated in BW.
An Example:
Waste report in PP run for plant 1000 for 12/2005 and process order 123456. The operational scrap should be 2.46% and the component scrap should be 3.00% for material 10000000. The report is showing 7.87% for planned operational waste % and 9.6% for planned component waste %. These values are not correct. The ODS values for order 123456 matched the data in R/3 for component and operational scrap.
There is a Start routine to the ODS and also to the cube. I am not good at ABAP so requesting your Help.
Here is the ODS Code:
tables: /BI0/PPRODORDER.
loop at data_package.
select single COORD_TYPE
PRODVERS
into (/BI0/PPRODORDER-COORD_TYPE,
/BI0/PPRODORDER-PRODVERS)
from /BI0/PPRODORDER
where PRODORDER = data_package-PRODORDER
and OBJVERS = 'A'.
if sy-subrc = 0.
if /BI0/PPRODORDER-COORD_TYPE = 'XXXX'
or /BI0/PPRODORDER-COORD_TYPE = 'YYYY'.
data_package-PRODVERS = space.
else.
data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
endif.
endif.
if data_package-calday = space
or data_package-calday = '00000000'.
if data_package-TGTCONSQTY NE 0.
data_package-calday = data_package-ACTRELDATE.
endif.
endif.
modify data_package.
endloop.
Here is Cube Code:
tables: /BI0/PPRODORDER,
/BIC/ODS.
TYPES:
BEGIN OF ys_mat_unit,
material TYPE /bi0/oimaterial,
mat_unit TYPE /bi0/oimat_unit,
numerator TYPE /bi0/oinumerator,
denomintr TYPE /bi0/oidenomintr,
END OF ys_mat_unit.
DATA:
l_s_mat_unit TYPE ys_mat_unit,
e_factor type p decimals 5.
loop at data_package.
select single COORD_TYPE
PRODVERS
into (/BI0/PPRODORDER-COORD_TYPE,
/BI0/PPRODORDER-PRODVERS)
from /BI0/PPRODORDER
where PRODORDER = data_package-PRODORDER
and OBJVERS = 'A'.
if sy-subrc = 0.
if /BI0/PPRODORDER-COORD_TYPE = 'XXX'
or /BI0/PPRODORDER-COORD_TYPE = 'YYY'.
data_package-PRODVERS = space.
else.
data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
endif.
endif.
if data_package-calday = space
or data_package-calday = '00000000'.
if data_package-TGTCONSQTY NE 0.
data_package-calday = data_package-ACTRELDATE.
endif.
endif.
data_package-agsu = 'GSU'.
data_package-agsu_qty = 0.
select single gr_qty
base_uom
into (/BIC/ODS-gr_qty,
/BIC/ODS-base_uom)
from /BIC/ODS
where prodorder = data_package-prodorder
and material = data_package-material.
if sy-subrc = 0.
if /BIC/ODS-base_uom = 'GSU'.
data_package-agsu_qty = /BIC/ODS-gr_qty.
else.
SELECT SINGLE * FROM /bi0/pmat_unit
INTO CORRESPONDING FIELDS OF l_s_mat_unit
WHERE material = data_package-material
AND mat_unit = 'GSU'
AND objvers = 'A'.
IF sy-subrc = 0.
IF l_s_mat_unit-denomintr <> 0.
e_factor = l_s_mat_unit-denomintr /
l_s_mat_unit-numerator.
multiply /BIC/ODS-gr_qty by e_factor.
data_package-agsu_qty = /BIC/ODS-gr_qty.
ENDIF.
else.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = /BIC/ODS-gr_qty
NO_TYPE_CHECK = 'X'
ROUND_SIGN = ' '
UNIT_IN = /BIC/ODS-base_uom
UNIT_OUT = 'GSU'
IMPORTING
OUTPUT = DATA_PACKAGE-gsu_qty
EXCEPTIONS
CONVERSION_NOT_FOUND = 1
DIVISION_BY_ZERO = 2
INPUT_INVALID = 3
OUTPUT_INVALID = 4
OVERFLOW = 5
TYPE_INVALID = 6
UNITS_MISSING = 7
UNIT_IN_NOT_FOUND = 8
UNIT_OUT_NOT_FOUND = 9
OTHERS = 10.
endif.
endif.
endif.
modify data_package.
endloop.
some how the AGSU qyt is not populating in the cube and when I dbug the code, I could see a clean record in the internal table but not in the cube.
your suggestion and solutions would be highly appreciated.
thanks,
Swathi.

Hi Swathi
In ODs we have option of overwriting and addition however in Cube we have only adition.Thats why you are getting multiple enteries.
If you are running daily full load on the cube then please delete the earlier requests.
So at one point of time there should be only one full load request in cube. Hope this will solve your problem.
Regards,
Monika

Can I combine multiple entries into a single statement?

I am relatively new to Live Cycle so forgive my lack of technical wording.
I would like to use multiple entry fields to fill in a statement.
For example:
I'd like the user to see this:
Target Dropdown Endo Dropdown Type Dropdown Version # Entry Date 1 Entry Date 2 Entry
and then have the form merge all that together into a line that looks like this:
RS_(target)_(endo)_(type)\(version)_(date)_(date)
Preferably without repeating information on the page as we'll have multiple of these entries and the page will get hectic quick.
Is this possible?
I first had each dropdown in individual table fields, but due to regulations we follow the entries need to be merged without spaces.
I always have a backup if this can't be done, but any help is appreciated.

Not sure where you're sending it, but if you have a global variable named "bob".
bob.value = "RS_"+target.rawValue+"_"+endo.rawValue+"_"+type.rawValue+"\"+version.rawValue+"_"+date.r awValue+"_"+date2.rawValue;
Something like that should work.

HT4528 Calendar under IOS7.0.2 has been changed. does not work the same. what happened to LIST mode (multiple entries being displayed in list format) or am i doing something wrong?

I got use to using Calendar app where multiple entries are stacked under IOS6. Under iOS7.0.2 I enter a new appointment and after the entry I can not find the new appointment after i click on done. Am I doing something incorrect HELP!

The list view does not appear to be among the "standard views" for the Calendar app in iOS 7.0.x. You can still get the list view by going to the day view and hitting the search button (magnifying glass icon).

Picking the value of PBEG and PEND incase of multiple entries 2002 on a day

Hi Experts,
Our client's business requirement is to have provision handling multiple entries multiple entries of same subtype of IT 2002 on same day with different Time entries.For example one IT 2002 Styp 1 has entry 10 am to 14 pm & other entry of IT 2002 styp 1 as 14 pm to 16 pm.
In this scenario I want to have TWT with start time of 1st 2002 record i.e 10 & another TWT with end time of last 2002 record i.e. 16.
I have written a PCR as
OUTTPORIGS Origin status
    COLOP*     TIP >TOP curr.TType
P
    HRS=PBEG   Set
    ADDDB90T3 Add to day balance
    HRS=PEND   Set
    ADDDB90T4 Add to day balance
But its giving me value of 2002 start time as (1014=24) & END time (1416=30) respectively.
Since TIP will have entries with origin E & A as well with P and any entry can be 1st or last entry depending on time, I can't use VRSTFIRST & VARSTLAST.
Please suggest me how to handle such scenario through PCR. Is there a way we can make decision on From & To of TIP entries.
You can also suggest me if such need can be handled at masterdata level so that we can have just one entry
Regards
S S
Hi All,
Please also suggest me a better operation to pick the value of PBEG and PEND incase of multiple entries various subtypes of 2002 on same day.I need to compare start- end time of 2002 with 2011 entries and calculate total attendence hrs. Once again, I can't use VRSTFIRST & VRSTLAST as 1st & last TIP entry could be come from any infotype viz 2011,2002, 2001.
Regards
Sunita
Edited by: Sunita on Feb 5, 2011 10:02 AM

If you want to do it the T-SQL way, follow this article I wrote on deleting duplicates..
http://sqlsaga.com/sql-server/how-to-remove-duplicates-from-a-table-in-sql-server/
To read about what ranking functions does and how will they help you use this link..
http://sqlsaga.com/sql-server/what-is-the-difference-between-rank-dense_rank-row_number-and-ntile-in-sql-server/
Please mark as answer, if this has helped you solve the issue.
Good Luck :) .. visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
the incorrect entry? Adobe installed a very quick update today.

They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''may''' need to update)
* Shockwave Flash 10.1 r53
* Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download link and other information''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

Multiple entries of the same topic in calendar

Hi, i am having trouble with my calendar, as in it displays multiple entries of 1 entry on the same day! eg. if i have one entry then it displays that same entry about 15-20 times on that same day in a list!!! can anyone help with this fault?

I'm having same problem but where there are duplicate calendar entries, one of the entries cannot be changed (doesn't have edit button)and the other entry can be changed. Needed to reschedule a doctor's appointment and wasn't able to delete b/c there isn't an edit button. So it stays there. Don't know which date is the new rescheduled date. I have iPhone 3g. Since iPhone4 my 3g is extremely slow too.

To delete multiple entries in table control in module pool

Hi,
Please help me out to know , how to delete multiple entries from table control when multiple lines in table control are selected.
Regards,
Irfan Hussain

hai,
you can do it inthis way.
in the PAI event.
loop at <table control name>
module del_itab.
endloop.
in the nodule,write the folowing code.
if <tablecontrol>-fieldname = 'X'.
delete <tablecontrol-itab>
endif.
cheers

Multiple entries in Contacts

Similar Messages

Maybe you are looking for