Multiple entries in ical

I can't understand why this has happened - i went back to my entries for last year to check on a birthday that hadn't shown up for this year and i had multiple entries for each event e.g an appointment would be listed 20 times - for that date.
Does anybody know what the problem is?

Probably because of iCloud since I assume you started it up on both Macbook and a mobile device.

Similar Messages

How to rid of multiple entries in ical

How the blazes do you you get rid of MULTIPLE entries in ical? I have read many answers and printed off a few to follow them but invariably i get to a point where I am unable to take the next step! I back track and and unable to find a fault of where I went wrong!! Then I have to ask myself WHY? Why on earth am I having to go to such extreme lengths to get rid of the unwanted entries?
Come on now Apple it is you who should be providing the simple logic answer to this?
I decided to give up? just ignore the other entries it easier than going frantic trying (and anyway I am frightened I may throw the macbook in my temper)
bye bye
bob

Hi pvonk
I do know how to delete the odd file but I have things like bank holidays entered 7 or 8 times and Trooping the colour 15 entres Queens jubilee 14 times.
I just want to stop the thing from doing that and if there is a way my question is why do I have to do it? surely apple should fix it or whatever
peardrop

Multiple entries from iCal calendar being displayed, why?

My Trainingpeaks account is synced with calendar using iCal. Recently multiple entries fro the same vent are being displayed. How do I stop this?

Probably because of iCloud since I assume you started it up on both Macbook and a mobile device.

Multiple entries in iCal and Address book

why after upgrading to lion and iOS5 does my address book and calendar have triple and quadruple entries for the same event?

Probably because of iCloud since I assume you started it up on both Macbook and a mobile device.

Multiple entries in Calendar

Is anyone else having this problem?
My contacts are fine, but I noticed multiple entries in my Calendar on my Touch iPod. In the past, I've seen multiple entries with iCal (I think it came from being synced with my blackberry and/or .mac - but it seems to be working fine for the past month or so), but iCal looks fine.
It's really bizarre, because it almost looks like the further you go back in time, the more duplications for an event (reoccurring) are found. If you try and Delete an occurrence on the iPod, it only allows you to delete from that point forward - but ones from the previous year/month are still there. The starting date for an occurence on the iPod is always on the day you are checking, so it's not like it's set to the first time you entered it or something so you can't go back to the first instance.
ALSO.
I noticed that some all day events span over to the following day on the iPod, but are fine in iCal.

You know - now that you mentioned it - I did see a WHOLE lotta dos - but didn't think anything of it.
I've since restored the thing and elected to not sync the calendar.
One thing that did get fixed - was mix-matched album artwork... podcasts, music, even videos were all getting their album artwork messed up - 1.1.2 seems to have fixed that... mind you... I've had to do a factory restore so many times because of this bloody calendar thing; perhaps I should give it more time before I declare that part is ok.

Multiple entries appear on iCal on MBPro

When I open iCal on my Lion MBPro, multiple entries appear each time with an additional entry. How can I prevent this from happening? Can the unwanted entries be removed automatically rather than individually?
Thanks for your help.
Vernon

Hi Vernon,
Do you sync your iPad to your comnputer by iCloud or iTunes (or both)?
Do you have calendars listed under different sections of the calendar list with the same name?
Best wishes
John M

Multiple accounts in ical after upgrading to iCloud

I have upgraded my Mac to Lion and I have now moved my previous mobileme account. I have found that my iCal application on my Mac is creating multiple CalDAV accounts that duplicate my calendar entries. If I try to delete these accounts they just come back - I have counted 44 of them listed!
I cant see the same if I log into iCloud to view my Calendar there.
Please help me reset this on my Mac so I have just the one account.

OK - looks like I finally managed to delete some of them - found multiple entries on ~/library/calendars/ causing the issue
Will continue to test over the next few days.
Man, this move to iCloud to doing my head in...

Multiple Birthday in iCal since OSx Lion

I use OS X Lion in German.
Since my upgrade to Lion there are multiple entries of the birthday in iCal.
If I cancel the entry in my adress book there are still multiple birthday entries in iCal for this person.

Go into your iCloud account online and get into your calendar. Open one of the duplicated Birthdays. Close it. Do you get a server error? If not ... go into your second duplicated Birthday and select it. Do you get a server error? I can't remember off hand what the error message read but you've got the same problem I had. The village idiot at Apple had me delete them ... then said that I'd have to speak with an iCloud tecchie as it's their problem. Of course, he had no idea how to get the Birthdays back! Said Apple should have a backup from my initial entry into iCloud. Good luck. I've had three online appointments with the iCloud folks and they've NEVER returned a call!!

Why do I have multiple entries on my calender

Why is that I have multiple entries on my calender of the same appointment or holiday since I started using I cloud. How do I clean up my calender and not have future duplication on my devices.
I am using the I pad 2 and Iphone 4S
Thanks

Click the calendars button in the top left corner of calendar, look to see if you have groups of calendars other than iCloud. I only have iCloud calendars on my phone so can't show you what I mean, but I have other groups on my iCal application on my mac which is sort of similar.

Multiple entries in my calendar

Hello:
I have some how gotten multiple entries into my calendar. Thanksgiving day has 6 entries, Mother's day about 5 - that kind of thing. I did NOT import these dates multiple times. Events I have created, either recurring or single, have also some how duplicated themselves.
I do not share a calendar with any one, it's just my stuff. The calendar is so messed up, what I'd like to do is some how select everything going forward and delete it all and start again. Deleting everything one at a time will drive me postal.
Thanks!

Hi,
I wrote an application called iCal Dupe Deleter to fix this sort of problem. See www.nhoj.co.uk/icaldupedeleter
The application is free to use, but I ask for donations if you find it useful.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

How do I select multiple events in iCal 8.0?

In OSX Mavericks, I used to be able to select multiple events in iCal in the event list view. I could select the initial event in the span of events to be selected. Then hold Shift while selecting the final even in the span of events. As a result, all of the events in that span would be selected.
in OSX Yosemite, this is no longer possible. There appears to be no list view, and holding the Shift button does not allow me to select a span of events.
What is the best way to select a span of events, say as much as 30 events?
Thank you.

Empty Caches
1. Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    "Develop" menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
2. Quit Safari if open.
    Option click the "Go" menu in the Finder menu bar.
    Select "Library" and then "Caches".
    Look for the folder 'com.apple.Safari"
    Right click "com.apple.Safari" and select "Move to Trash"
    Relaunch Safari.

Data in the cube is showing multiple entries when compared with ODS

Hello BW Gurus,
We have a waste report in production planning on Cube and ODS separately. The same info package loads both targets (which means same infosource) but when we run a report on Cube, the records are showing multiple entries (i.e. Key Figures are not matching when compared to ODS) where as the ODS records are showing correctly as it was in R/3. There are totally 6 key figures out of which 4 pulled from R/3 and 2 are populated in BW.
An Example:
Waste report in PP run for plant 1000 for 12/2005 and process order 123456. The operational scrap should be 2.46% and the component scrap should be 3.00% for material 10000000. The report is showing 7.87% for planned operational waste % and 9.6% for planned component waste %. These values are not correct. The ODS values for order 123456 matched the data in R/3 for component and operational scrap.
There is a Start routine to the ODS and also to the cube. I am not good at ABAP so requesting your Help.
Here is the ODS Code:
tables: /BI0/PPRODORDER.
loop at data_package.
select single COORD_TYPE
PRODVERS
into (/BI0/PPRODORDER-COORD_TYPE,
/BI0/PPRODORDER-PRODVERS)
from /BI0/PPRODORDER
where PRODORDER = data_package-PRODORDER
and OBJVERS = 'A'.
if sy-subrc = 0.
if /BI0/PPRODORDER-COORD_TYPE = 'XXXX'
or /BI0/PPRODORDER-COORD_TYPE = 'YYYY'.
data_package-PRODVERS = space.
else.
data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
endif.
endif.
if data_package-calday = space
or data_package-calday = '00000000'.
if data_package-TGTCONSQTY NE 0.
data_package-calday = data_package-ACTRELDATE.
endif.
endif.
modify data_package.
endloop.
Here is Cube Code:
tables: /BI0/PPRODORDER,
/BIC/ODS.
TYPES:
BEGIN OF ys_mat_unit,
material TYPE /bi0/oimaterial,
mat_unit TYPE /bi0/oimat_unit,
numerator TYPE /bi0/oinumerator,
denomintr TYPE /bi0/oidenomintr,
END OF ys_mat_unit.
DATA:
l_s_mat_unit TYPE ys_mat_unit,
e_factor type p decimals 5.
loop at data_package.
select single COORD_TYPE
PRODVERS
into (/BI0/PPRODORDER-COORD_TYPE,
/BI0/PPRODORDER-PRODVERS)
from /BI0/PPRODORDER
where PRODORDER = data_package-PRODORDER
and OBJVERS = 'A'.
if sy-subrc = 0.
if /BI0/PPRODORDER-COORD_TYPE = 'XXX'
or /BI0/PPRODORDER-COORD_TYPE = 'YYY'.
data_package-PRODVERS = space.
else.
data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
endif.
endif.
if data_package-calday = space
or data_package-calday = '00000000'.
if data_package-TGTCONSQTY NE 0.
data_package-calday = data_package-ACTRELDATE.
endif.
endif.
data_package-agsu = 'GSU'.
data_package-agsu_qty = 0.
select single gr_qty
base_uom
into (/BIC/ODS-gr_qty,
/BIC/ODS-base_uom)
from /BIC/ODS
where prodorder = data_package-prodorder
and material = data_package-material.
if sy-subrc = 0.
if /BIC/ODS-base_uom = 'GSU'.
data_package-agsu_qty = /BIC/ODS-gr_qty.
else.
SELECT SINGLE * FROM /bi0/pmat_unit
INTO CORRESPONDING FIELDS OF l_s_mat_unit
WHERE material = data_package-material
AND mat_unit = 'GSU'
AND objvers = 'A'.
IF sy-subrc = 0.
IF l_s_mat_unit-denomintr <> 0.
e_factor = l_s_mat_unit-denomintr /
l_s_mat_unit-numerator.
multiply /BIC/ODS-gr_qty by e_factor.
data_package-agsu_qty = /BIC/ODS-gr_qty.
ENDIF.
else.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = /BIC/ODS-gr_qty
NO_TYPE_CHECK = 'X'
ROUND_SIGN = ' '
UNIT_IN = /BIC/ODS-base_uom
UNIT_OUT = 'GSU'
IMPORTING
OUTPUT = DATA_PACKAGE-gsu_qty
EXCEPTIONS
CONVERSION_NOT_FOUND = 1
DIVISION_BY_ZERO = 2
INPUT_INVALID = 3
OUTPUT_INVALID = 4
OVERFLOW = 5
TYPE_INVALID = 6
UNITS_MISSING = 7
UNIT_IN_NOT_FOUND = 8
UNIT_OUT_NOT_FOUND = 9
OTHERS = 10.
endif.
endif.
endif.
modify data_package.
endloop.
some how the AGSU qyt is not populating in the cube and when I dbug the code, I could see a clean record in the internal table but not in the cube.
your suggestion and solutions would be highly appreciated.
thanks,
Swathi.

Hi Swathi
In ODs we have option of overwriting and addition however in Cube we have only adition.Thats why you are getting multiple enteries.
If you are running daily full load on the cube then please delete the earlier requests.
So at one point of time there should be only one full load request in cube. Hope this will solve your problem.
Regards,
Monika

Can I combine multiple entries into a single statement?

I am relatively new to Live Cycle so forgive my lack of technical wording.
I would like to use multiple entry fields to fill in a statement.
For example:
I'd like the user to see this:
Target Dropdown Endo Dropdown Type Dropdown Version # Entry Date 1 Entry Date 2 Entry
and then have the form merge all that together into a line that looks like this:
RS_(target)_(endo)_(type)\(version)_(date)_(date)
Preferably without repeating information on the page as we'll have multiple of these entries and the page will get hectic quick.
Is this possible?
I first had each dropdown in individual table fields, but due to regulations we follow the entries need to be merged without spaces.
I always have a backup if this can't be done, but any help is appreciated.

Not sure where you're sending it, but if you have a global variable named "bob".
bob.value = "RS_"+target.rawValue+"_"+endo.rawValue+"_"+type.rawValue+"\"+version.rawValue+"_"+date.r awValue+"_"+date2.rawValue;
Something like that should work.

HT4528 Calendar under IOS7.0.2 has been changed. does not work the same. what happened to LIST mode (multiple entries being displayed in list format) or am i doing something wrong?

I got use to using Calendar app where multiple entries are stacked under IOS6. Under iOS7.0.2 I enter a new appointment and after the entry I can not find the new appointment after i click on done. Am I doing something incorrect HELP!

The list view does not appear to be among the "standard views" for the Calendar app in iOS 7.0.x. You can still get the list view by going to the day view and hitting the search button (magnifying glass icon).

Picking the value of PBEG and PEND incase of multiple entries 2002 on a day

Hi Experts,
Our client's business requirement is to have provision handling multiple entries multiple entries of same subtype of IT 2002 on same day with different Time entries.For example one IT 2002 Styp 1 has entry 10 am to 14 pm & other entry of IT 2002 styp 1 as 14 pm to 16 pm.
In this scenario I want to have TWT with start time of 1st 2002 record i.e 10 & another TWT with end time of last 2002 record i.e. 16.
I have written a PCR as
OUTTPORIGS Origin status
    COLOP*     TIP >TOP curr.TType
P
    HRS=PBEG   Set
    ADDDB90T3 Add to day balance
    HRS=PEND   Set
    ADDDB90T4 Add to day balance
But its giving me value of 2002 start time as (1014=24) & END time (1416=30) respectively.
Since TIP will have entries with origin E & A as well with P and any entry can be 1st or last entry depending on time, I can't use VRSTFIRST & VARSTLAST.
Please suggest me how to handle such scenario through PCR. Is there a way we can make decision on From & To of TIP entries.
You can also suggest me if such need can be handled at masterdata level so that we can have just one entry
Regards
S S
Hi All,
Please also suggest me a better operation to pick the value of PBEG and PEND incase of multiple entries various subtypes of 2002 on same day.I need to compare start- end time of 2002 with 2011 entries and calculate total attendence hrs. Once again, I can't use VRSTFIRST & VRSTLAST as 1st & last TIP entry could be come from any infotype viz 2011,2002, 2001.
Regards
Sunita
Edited by: Sunita on Feb 5, 2011 10:02 AM

If you want to do it the T-SQL way, follow this article I wrote on deleting duplicates..
http://sqlsaga.com/sql-server/how-to-remove-duplicates-from-a-table-in-sql-server/
To read about what ranking functions does and how will they help you use this link..
http://sqlsaga.com/sql-server/what-is-the-difference-between-rank-dense_rank-row_number-and-ntile-in-sql-server/
Please mark as answer, if this has helped you solve the issue.
Good Luck :) .. visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

Multiple entries in ical

Similar Messages

Maybe you are looking for