Multiple entries in 'Open Width'using the above terminal command

/System/Library/Frameworks/CoreServices.framework/Frameworks/LaunchServices.fram ework/Support/lsregister -kill -r -domain local -domain system -domain user
I tried using the above terminal command to reset launch services but it does not seem to work. I still have multiple entries. What am I doing wrong?

You may have to clarify. Multiple entries in Open With can be normal. For example if you have multiple versions of an application for whatever reason, they will all show. Plus, any applications that report being able to open a file type will show (had an annoyingly long list for text files on my old machine as some apps that didn't even handle documents such as games reported being able to open them).

Similar Messages

Help, I used the mv terminal command and now I cant find my files!

I used to mv command to move a large 19GB file to my now 3TB external hdd and now I can not find the file! I logged in as root and used this:
mv /Users/username/filename /Volumes/Mac\ OS\ External\filename

Choose Go to Folder from the Finder's Go menu, provide /Volumes/Mac OS External/ as the path, and drag it to the desired location.
(78736)

How do I scan multiple pages into one document using the CanoScan LiDE 200?

How do I scan multiple pages into one document using the CanoScan LiDE 200?
I can't seem to find a way to get them to scan continuously, or a way to stitch them together afterwards.

Hi dagda24,
You can scan multiple pages into a single document with the scan to PDF option. Use the following steps to do so:
1. Open MP Navigator.
2. Click One Clcik.
3. Click Save to PC.
4. Change the File Type from PDF to PDF (multiple pages).
5. Make any other changes as needed, then click scan.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks

I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks

>SystemPreferences>Network>DNS

Can multiple computers in one office use the same Adobe ExportPDF subscription?

Can multiple computers in one office use the same Adobe ExportPDF subscription?

Hi urinutrioned,
An ExportPDF subscription is tied to a single Adobe ID and password, so it's meant for a single user to access.
Best,
Sara

HT1399 When I import a CD to itunes, it splits the album in to multiple entries. I have changed the info on some but others just will not merge. Is there an easy way to do this and can I stop them from splitting in future? Thanks

When I import a CD to itunes, it splits the album in to multiple entries. I have changed the info on some but others just will not merge. Is there an easy way to do this and can I stop them from splitting in future? Thanks

Okay this is what fixed my problem. Some kind of error/glitch occured half-way through importing that third cd that prevented further imports from any other cd. Once I completely removed the half-imported cd album from my library I could further import cd's without any problems.

Can anyone please help? Every time I start up my imac OSX 10.6 desktop my Aperture 3 programme opens up without being requested. Is it possible to stop this from happening and only open by using the desktop icon? Thank you for any assistance.

Can anyone please help? Every time I start up my imac OSX 10.6 desktop my Aperture 3 programme opens up without being requested. Is it possible to stop this happening and only allow Aperture to open by using the desktop icon? Thank you for any assistance anyone may be able to give.
Best regards, John.

because there is absolutely no mention in my System Preferences of either Users & Groups nor Start Up Items.
John,
William's solution was much easier - just for completeness sake: The preferences panes to edit your startup items moved between the Mac OS X updates: I forgot that the "Users&Groups" preference pane used to be called "Users" in Mac OS X 10.6; it is the panel that you use to create new User accounts; and earlier systems had a separate preferences panel "Login" to enable and to disable the applications that are launched at login. Both are now combined in "Users&Groups". Sorry for sending you on a wild goose chase with the wrong Preferences panel.
Regards
Léonie

When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?

When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?

I just found the solution!
Niel
Re: Why is my Finder window popping up when I open my Safari window?
Jan 20, 2008 7:58 PM (in response to alak)
Open the General tab of the Safari preferences and correct the home page; the default page is this one. If it has become set to a folder on an FTP server or a local drive, that request will be sent to the Finder. (28252)
iMac Late 2007 Core 2 Duo, Mac OS X (10.5.1)

I sent iTunes to trash. I was able to recover the program but have to "put back" songs one at a time. Is there any way to put back from trash using the "select all" command?

I sent iTues to trash by mistake (trying to delete files from "yesterday"). I got the program back but have to "put back" songs one at a time. Is there a way to put back multiple songs using the "select all" command or anything else? Thanks for the help.

The prgram is in one location and the library (media + library files) are in another. Sending it all to the trash would take some pretty delibrate multiple actions and digging through multiple folders, so I don't know how this was managed unless there's something in Snow Leopard that's new. Occasionally I have moved a file to the trash in Finder that I didn't want to and I can use Finder's "undo" to undo the last move. With many files...?

Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Get Info' command in the Finder to ensure the file is unlocked and you have permission to access the file.

I have this massage every time close ps cc
Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder.

You may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

Using the 'route print' Command in Windows 7 - Detailed Screen Captures

The 'route print' Command from an Administrative Command Prompt in Windows 7 provides a variety of useful information. Let's take a look at the output of a 'route print' Command to examine how the output data is grouped and to understand its logic.
Let's begin by simply issuing the following command:
route print
An Administrative Command Prompt output shows the following the following sections of the Command Output:
Figure 1 - Issuing the 'route print' Command from an Administrative Command Prompt in Windows 7
Observing the output of the Command indicates there are 5 Major Sections. The Sections include:
Interface List
IPv4 Route Table
IPv4 Persistent Routes
IPv6 Route Table
IPv6 Persistent Routes
On this Workstation a single Physical Network Interface is visible and has been assigned a DHCP Address of '10.1.1.36'.
The IP Stack for this Workstation is as follows:
IP Address: 10.1.1.36
Subnet Mask: 255.255.255.0
Default Gateway: 10.1.1.1
DNS Server: 10.1.1.1
DHCP Server: 10.1.1.1
DNS Suffix: YYY.YYY.isp-provider.net
Most of the time our focus is upon the IPv4 Routing Table output. Here are the sections of the IPv4 Routing Table output for reference.
Figure 2 - The IPv4 Route Table output listing the 'all networks' route through the Default Gateway.
The next IPv4 Routing Table entry indicates '10.1.1.36' (the Host Workstation' is a member of the '10.1.1.1/24' Network and would route packets out the '10.1.1.36' Interface.
Figure 3 - The Workstation Host at '10.1.1.36' is a member of the '10.1.1.0/24' Network Subnet.
The next IPv4 Routing Table entry indicates '10.1.1.36' may receive a Broadcast from the '10.1.1.0/24' Network (as noted by the Subnet Mask of '255.255.255.255').
Figure 4 - The Workstation Host at '10.1.1.36' can offer a Broadcast on the '10.1.1.0/24 Network' (as noted by the 255.255.255.255 Subnet Mask).
Another IPv4 Routing Table entry focused on Broadcast Addresses is the following. The Host Workstation at '10.1.1.36' may offer Network Broadcasts to the '10.1.1.0/24' Network.
Figure 5 - The Workstation Host at '10.1.1.36' can receive Network Broadcasts from the '10.1.1.0/24' Network (as noted by the '10.1.1.255' Network Destination).
The next IPv4 Routing Table entries (3 of them) are focused on the Loopback Network Values of '127.0.0.0/8', '127.0.0.1/32' and the Loopback Network Address of '127.255.255.255/32' respectively. These Addresses provide Services to the Local Host (or Loopback Adapter). The Loopback Network Destination of '127.0.0.0' provides access to the Loopback Network through '127.0.0.1' the Loopback IP Address. The Loopback IP Address of '127.0.0.1/32' receives Limited Local Broadcast to the Loopback Network while the Loopback IP Address of '127.255.255.255/32' provides Limited Broadcast to the Loopback Network.
Figure 6 - The Workstation Host at '10.1.1.36' uses 3 Addresses for Services to the 'Local Host'. All 3 Addresses incorporate the '127.x.x.x' format.
Next the Routing Table includes 2 specific entries for the Multicast Network (224.0.0.0/4) for both the 'Local Host' or Loopback Address of '127.0.0.1' and the Host IP Address of '10.1.1.36' that are '224.0.0.0/4' . These are used for Multicast Network functions.
Figure 7 - The Workstation Host at '10.1.1.36' includes 2 Multicast Addresses (starting with '240.0.0.0') reserved for use through either the Loopback Address '127.0.0.1' or the Host IP Address '10.1.1.36'.
The last 2 Routing Table entries provides Services through Limited Broadcast Addresses. The Network Destination of '255.255.255.255/32' are the Limited Broadcast Address Ranges for both the Loopback Adapter '127.0.0.1' and the Host IP Address '10.1.1.36'.
Figure 8 - The Workstation Host at '10.1.1.36' includes 2 Limited Broadcast IP Address Values to Service both the Loopback Network '127.0.0.1' and the Host IP Network '10.1.1.36'.
Finally, upon understanding the sections of the Windows 7 Routing Table there are additional functions available when using the 'route' Command. This Blog entry is focused solely on output from the 'route print' Command.
Summary: In this Blog entry focused on using the 'route print' Command from an Administrative Command Prompt in Windows 7. Each of the defined routes for a Workstation running Windows 7 Enterprise were reviewed for reference.
Lynn Lunik
Chief Security Architect
IT Pro Secure Corporation
and exchangesummit.net
blog <at> itprosecure.com

I thought, it is my browser issues of not seeing the images.
but as seen on the other comments, this not in my browser case.
Can someone check on this and repost the images if needed?

Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command

Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command
and I am getting an Error , I cant figure out what I am doing wrong. I have also pasted my display down here can someone help me out, thanks in advance, I am still new to this utility.
My questions are How do you direct this utility to point to the desktop or the TFTP folder
does FE_PORT: Fast Ethernet 0 imply or point to Fa0/0 on my router
My router is suppose to have 10.0.0.3 255.0.0.0
Gateway of 10.0.0.1 255.0.0.0
My TFTP Server 10.0.0.2 255.0.0.0
How do I get the MAC address of the Router or the TFTP Server and which one is required?
my Ethernet port is 100Mb/Sec I cant tell whether it is full duplex or not so How do i set this FE_SPEED_MODE: Auto???
=====================================================================================
rommon 10 >
rommon 10 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
?=0
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=
rommon 11 > TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
rommon 12 > TFTP_CHECKSUM=0
rommon 13 > SET
monitor: command "SET" not found
rommon 14 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
?=0
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
rommon 15 > tftpdnld
          IP_ADDRESS: 10.0.0.3
      IP_SUBNET_MASK: 255.0.0.0
     DEFAULT_GATEWAY: 10.0.0.1
         TFTP_SERVER: 10.0.0.2
           TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
        TFTP_VERBOSE: Progress
    TFTP_RETRY_COUNT: 18
        TFTP_TIMEOUT: 7200
       TFTP_CHECKSUM: No
        TFTP_MACADDR: 30:37:a6:49:35:a8
             FE_PORT: Fast Ethernet 0
       FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 16 >       " not found
rommon 17 >FE_SPEED_MODE=2
variable name contains illegal (non-printable) characters
rommon
rommon 18 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
?=0
rommon 19 > tftpdnld [ur]
usage: tftpdnld [-hr]
Use this command for disaster recovery only to recover an image via TFTP.
Monitor variables are used to set up parameters for the transfer.
(Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)
"ctrl-c" or "break" stops the transfer before flash erase begins.
The following variables are REQUIRED to be set for tftpdnld:
            IP_ADDRESS: The IP address for this unit
        IP_SUBNET_MASK: The subnet mask for this unit
       DEFAULT_GATEWAY: The default gateway for this unit
           TFTP_SERVER: The IP address of the server to fetch from
             TFTP_FILE: The filename to fetch
The following variables are OPTIONAL:
          TFTP_VERBOSE: Print setting. 0=quiet, 1=progress(default), 2=verbose
      TFTP_RETRY_COUNT: Retry count for ARP and TFTP (default=18)
          TFTP_TIMEOUT: Overall timeout of operation in seconds (default=7200)
         TFTP_CHECKSUM: Perform checksum test on image, 0=no, 1=yes (default=1)
          TFTP_MACADDR: The MAC address for this unit
               FE_PORT: 0= (default), 1
         FE_SPEED_MODE: 0=10/hdx, 1=10/fdx, 2=100/hdx, 3=100/fdx,
                        5=Auto (default)
      TFTP_DESTINATION: The flash destination device for the file
                        flash:(default), usbflash0:, usbflash1:
Command line options:
   -h: this help screen
   -r: do not write flash, load to DRAM only and launch image
rommon 20 > tftpdnld
          IP_ADDRESS: 10.0.0.3
      IP_SUBNET_MASK: 255.0.0.0
     DEFAULT_GATEWAY: 10.0.0.1
         TFTP_SERVER: 10.0.0.2
           TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
        TFTP_VERBOSE: Progress
    TFTP_RETRY_COUNT: 18
        TFTP_TIMEOUT: 7200
       TFTP_CHECKSUM: No
        TFTP_MACADDR: 30:37:a6:49:35:a8
             FE_PORT: Fast Ethernet 0
       FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 21 >

What I notice in the original post is this error
ARP: address resolution for 10.0.0.2 timed out.
which says that the router is looking for the 10.0.0.2 server but not getting response to its arp request. Can the original poster clarify for us how the device that has the image file is connected to the router that has the problem? Also what kind of device is 10.0.0.2? Is it a PC running TFTP server software or is it something else?
HTH
Rick

I can no longer use the keyboard shortcuts, 'command C' and 'command V'. Did I inadvertently do something to my keyboard or computer that caused this? Is there a way to fix it?

I can no longer use the keyboard shortcuts, 'command C' and 'command V'. Did I inadvertently do something to my keyboard or computer that caused this? Is there a way to fix it?

You can also check in System Preferences > Keyboard > Keyboard Shortcuts, make sure that custom shortcuts were not created using those same commands. If ones were, they could be creating a conflict. Step throuogh each of the items in the left list, checking the array presented in the right pane for each.

When I try to use the refine edge command I get this message could not complete the refine edge comm

when I try to use the refine edge command I get this message could not complete the refine edge command because of programe error

Quit the editor, then restart it while holding ctrl+alt+shift (command+option+shift on a mac). Keep the keys down till you see a window asking if you want to delete the settings file. You do.

Whenever I close down Photoshop CS5 I get the message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the get info command in Finder to unlock the file or change permission on the file or enc

Whenever I close down Photoshop CS5 I get the message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the get info command in Finder to unlock the file or change permission on the file or enclosing folders." What on earth does it mean? How can I stop this message from appearing?

See here:
I cannot save recent images.

Multiple entries in 'Open Width'using the above terminal command

Similar Messages

Maybe you are looking for